Want HP DV6 7300ea

Similar Questions

• want to dv6 corei7 not showing hdd or ssd during the installation of windows...

  HY I HAV some pblm please help me... This is a situation that happened with me...

  I want HP dv6 7211tx with ssd of 32 GB and 1 TB hdd windows8 was installed on hdd and ssd for cache... I bought 2 weeks b4 and used with caution...

  I was watching the movie I stopped it and Down power button to sleep the computer laptop... after 2 hours I pressed the power button to start computer laptop where I left it so it works with lockscreen and b4, I do anything, he showed me windows error failure of memmory and automatically turned off and restart and starting device showed not found error...

  I tried to reinstall windows 8 but when installing my laptop didn't poster not any hard drive or ssd to install windows...

  so now im confused which is - this pblm serious or minor... I HAV no clue what has happened with my laptop...

  Please help me out... plzzzzzzzzzzzzzzzzzzzz

  Sorry, that didn't work.

  Accordingly, I have no idea why the drive is not considered.

• Want DV6-7300ea problem of updating Bios with SSD

  Hello

  Recently, I swapped my HARD drive to the STRANGE Bay and put an SSD in the startup location.  Everything works fine until it was update the BIOS to the new version F.26.  After having downloaded the update and run the .exe, the computer restarts and the normal blinking screen comes up - everything seems as it should and checks the update. Then, the system reboots and what I see is a black screen with the fan turns. He accomplishes this task for 30 seconds, then stops and goes through the same routine. I left for an hour, but no progress so I removed the battery and swapped the HARD drive in the main Bay. Put running the laptop and it displays the screen "Boot Block update" and continued to work as usual.

  No idea why he won't not on-screen "update Boot Block" with the SSD in as peripheral to start?

  When you start the update of the BIOS ROM file performs a check of the configuration of the laptop. The coding of the met the STRANGE unexpected update and configuration SSD as your laptop went into a loop. When you have returned the laptop on its original config that apparently satisfied with the softpaq update BIOS and completed its task. Now, we know the results of the portable non-standard configurations on the BIOS updates.

  Thanks for posting this has happened and the final result.

  Best regards
  ERICO

• Want to dv6-7307tx: cannot install Qualcomm Atheros QCA9000 series bluetooth 4.0 + HS driver and wireless LAN driver

  Hello

  I use Envy HP dv6-7307tx

  I tried to install Qualcomm Atheros QCA9000 series bluetooth 4.0 + HS driver and the Qualcomm Atheros QCA9000 series wireless LAN driver, it prompted me with an error stating that "the device may not be present or could have been ejected/disconnected from the system.

  And my wifi connection is not stable, it disconnects often, which he can't seem to my other laptop.

  What should I do to solve?

  Thank you.

  Hello:

  The list of parts below to your laptop says that it comes with a card without thread/Intel Centrino Wireless-N 2230 bluetooth, so you have the Intel for W8.1 bluetooth driver.

  http://PartSurfer.HP.com/search.aspx?SearchText=D4B30PA

  Here is the link to the last W81. Driver Intel BT for this model of the wireless card.

  You want the second driver listed for 64 bit.

  https://downloadcenter.intel.com/download/23449/Intel-PROSet-Wireless-Software-for-Bluetooth-technology-for-Windows-8-1-

  You can also try the latest driver wireless card and see if that helps any - once again... 2nd driver for 64 bit.

  https://downloadcenter.intel.com/download/25224/Intel-PROSet-Wireless-Software-for-Windows-8-1-

• Want to dv6

  Hi all!

  I want dv6-7252eo laptop.

  I would like to replace my Intel Centrino Wireless - N with Intel Centrino Advanced-N dual band 6235 2230.

  This is especially because I would use 5 GHz network and I find my current NIC really unstable and unable to work with the latest updates. Had to update rollback so I can use it. I did some research but I'm still not sure if my laptop can support newer network card.

  Here is my info to laptops:

  Product name: HP ENVY dv6 Notebook PC

  Product number: C1Y10EA #UUW

  BIOS (Setup): F.28 - 25/07/2013 (last updated)

  Total memory: 8.00 GB

  Processor name Intel (r) Core i7-3630QM CPU @ 2.40 GHz

  I have installed Windows 8.1.

  I would like to add a few more memory RAM as well, my laptop supports 16 GB.

  I already bought Corsair Value Select 16 GB (2KIT) SO-DIMM DDR3 1600 MHz CL11.

  Do you think it will match with my laptop? I am currently using 8 GB (2KIT) DDR3 1600 MHz Hynix.

  http://support.HP.com/us-en/document/c03532772

  Thanks in advance!

  Vojislav Kovacevic

  Voja wrote:

  Ah thank you! Was worried a little bit because I already bought 6235.

  So, no need to 16 GB of RAM?

  You are welcome!!

  No, in my opinion, 8 GB of RAM is quite enough for a computer.

• Want to dv6: hard disk failure

  My faulty hard drive in my dv6 16 gig RAM (8.1 64-bit Windows) of Envy is a Toshiba model MQ01ABD100, ATA, 5400, the capacity is 1 T.  I want to replace the drive with a 2 t 7200.  What will be the best replacement? Can I use a SATA drive and it will improve performance?  Thank you.

  Hello

  What is your dv6? DV6 machines already use the SATA. Older generation dv6 use SATA II but the use of the most recent generation dv6 SATA III. In theory, you can use any standard laptop HARD drive today but to ensure compatibility, please use same brand of the existing HARD drive.

  Kind regards.

• Want & HP DV6-6152nr ent nbk upgraded HD 650 GB at 5400 RPM to the largest SS HD

  HI I have a HP DV6 - 6152nr Entertainment Notebook with an HD 650 GB at 5400 RPM.  I would appreciate information on how to UPGRADE to a faster disk of the SS.  You want to know if no size limit of the unit for the bios to work, if I can upgrade the bios so I must, without limit on memory needed.  I know this has a computor memory 8 GB limit (improve which?) connections are the same (that is, SATA, etc.  How can I?)  and everything I need to consider... I have Win 7, I have to upgrade to 8? etc.  Thank you for your help in advance.  It is also possible to swichout for a backlit keyboard?  Can I get one in the HP store and it is hard to change?

  Hello

  You have a lot of questions so please bear with me for the answers:

  1. Yes, you can go for SSDS, at this stage of 512 GB (more small HARD drive existing) is top of the range and should be ok for your machine.

  2. for the RAM: maximum support is 8 GB, I checked the entire series, they don't take over max, 8 GB

  3. your machine uses the standard SATA, very probably the SATA II controller. You can check this by using the following program:

  FTP://FTP.CPUID.com/PC-Wizard/PC-wizard_2012.2.11.zip

  4 No, no need to upgrade to Windows 8, but it is up to you.

  5. Yes and no depending on how you look at this because you need a new motherboard to plug the keyboard lighting.

  The cost of the above upgrades will put a big hole in your pocket. Please find the price/performance ratio before deciding. Save money to buy a new machine is certainly much better.

  Kind regards.

• want to dv6: ex 7295 dv6 of envy of the hp replacement screen

  I broke my upper screen of the tower and try to replace it. I wanted to know if the screen in the following link is for my laptop. Please help me.

  http://www.Amazon.com/HP-envy-DV6-7295EX-laptop-screen/DP/B00M130M8Y/ref=sr_1_1?ie=UTF8&QID=14427054...

  I am worried if all 7295ex want dv6 replacement screens will suit the mine or I should look for other features also. If I have to, how should I do? Thank you!!

  Hi @Avineesh,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your computer laptop dv6-7295ex HP ENVY and problems with the replacement of the screen. Your screen is 39.6 cm (15.6 ") LED backlit HD (1366 x 768) BrightView is this WXGA 1280 x 800 screen.

  So no, I wouldn't use it. HD 15.6 inch BrightView display panel, 682089-001 is the part number and here is a link to your manual.

  Please let me know how it goes.

  Thank you.

• Want to dv6 7210 - us audio glitch

  I recently purchased a dv6 want 7210 - us and it seems to be some sort of glitch sound every time I play the audio files or watching online videos. My laptop makes a buzzing sound and jumps in almost every audio file. Anyone know how to fix this problem?

  Hello jsmall91,

  Take a look at this document and follow the troubleshooting steps.  Please let me know if it helps to solve your problem.

  Good luck!

• want to dv6 7356 - is

  This is my model of computer laptop dv6 7356 - to and its screen is bright LED.

  This model supports the matte screen for full hd 1920 x 1080 that is supported by the 7308tx want?

  can I change the led on LED (1366 * 768) matte (1920 * 1080)?

  Hey, Kaan,.

  Yes, they are the same.

  Power supply type: power adapter 120W

  Page 96 shows you how to replace the screen.

   

  http://www.HP.com/CTG/manual/c03591281.PDF

   

  Here is a video on how to to replace duct on Youtube.

   

  http://www.YouTube.com/watch?v=o5ALv9UsbRg

   

  I hope this helps.

   

  Thank you

• want to dv6: Recovery manager

  Hello...

  I want to install a new OS (linux) on my laptop and I have not yet made the recovery disc

  After the installation of the new operating system, I can do recovery by the recovery disk by default on my HDD without disks?

  in the case where the recovery disc, I what I lose the ability to recover my hard drive recovery disk? (Because my hard disk drive is much safer than the discs in the case of protection)

  Thank you.

  KAAN says:
  

  Hello...

  I want to install a new OS (linux) on my laptop and I have not yet made the recovery disc

  After the installation of the new operating system, I can do recovery by the recovery disk by default on my HDD without disks?

  in the case where the recovery disc, I what I lose the ability to recover my hard drive recovery disk? (Because my hard disk drive is much safer than the discs in the case of protection)

  Thank you.

  Create a USB stick recovery before you make changes!  Do not create a set of recovery discs!

  A set of recovery disks is very fragile and can be destroyed with a single scratch on the disc label. A USB stick recovery is, unlike a DVD, very durable recovery.

  If you install Linux on the hard drive it will change the boot loader if you aren't careful and is more you allow to start on Windows.

  Make a recovery USB key does not remove the possibility of using F11, unless you make changes to the partition D: Recovery. This is where the Recovery Manager starts from when you use F11.

• Want to DV6 3630qm: replacement of the Standard Keyboard with backlit keyboard

  Hello

  I have a standard keyboard in my HP dv6 3630qm envy, I can replace it with a backlit keyboard... ??

  Kind regards...

  Hello:
  
  Good news
  Keyboard with backlight function is available in a few layouts, part number would be similar to 698951-xxx.
  
  You can flip through page 25 and 61 in this manual and know the exact part number:
  http://h10032.www1.HP.com/CTG/manual/c03591281.PDF
  
  Search for the part number HP HP part surfer Web site or via the shop online like eBay or Amazon.
  
  Concerning
  
  Visruth

• want to dv6 msata

  Hello

  I'm looking to add a disk to my HP Envy DV6 msata - 7250ca and I was wondering...

  (1) is it possible?

  (2) it does not support any drive msata size or is there only certain drives may work with it?

  I know in the manual it mentions a 32 GB msata drive used as cache but I would use a 128 GB or 256 GB in msata car because the OS not the cache. I was also looking to load Windows 7 instead of Windows 8 on it. Has anyone having problems with this?

  Yes a lot of questions. First of all, it is very difficult to get on the mSATA slot. Here is the Service Manual:

  Manual

  See Page 75-76 and all you have to do before getting to the slot.

  Second, player mSATA only usable as an operating system if you give up the main drive. If a primary SATA drive is present the system won't boot from disk mSATA. You can do a workaround involving a bootloader software on the main drive, but it is too complex to be practical.

  In your case, the best thing to do is to install an ordinary SATA SSD drive. They are less expensive than the mSATA disks. I saw yesterday that a top of the range THAT SSD 512 GB was going for $269 on newegg. We can certainly help you to put Windows 7 on it without problem.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Want to dv6 - 7250ca Windows 7 Validy sensor not working not

  Hello

  I have a HP envy dv6 - 7250ca I formatted and installed Windows 7 Professional. I found a driver using DriverMax to my fingerprint reader, but windows displays the device as "unavailible" and requests, I have reinstall the driver.

  I tried, but have not been able to find a driver for Windows 7. Plase help if you can!

  Pot,.

  Welcome to the HP Forum.

  If the suggested packages do not work on your system, you can try the following procedure.

  Comment

  Downgrade you this system of Windows 8 for Windows 7?

  If you actually run Windows 7 on this system, the operating system may or may not be from the computer.  I can find suggests that this series should run Windows 8.

  The following should work on Windows 7 or Windows 8 - pay attention to the instructions and use accordingly.

  ===========================================================================================

  Below validity sensors are compatible to the peripheral following fingerprint:

  USB\VID_138A & PID_0018 = "validity sensors (WBF) (PID = 0018)" "

  Reference:

   

  • Look for the version validity sensor driver:

  Control Panel > display icon > device management > biometric devices >

  Right-click on validity sensors / name of your adapter > driver > Watch The Version of the driver

   

  • Look for the biometric device hardware ID:
    

   

  Select the document called The biometric device driver Hardware ID

   

  ===========================================================================================
  

  Validity sensor (s)

  • Download and do NOT even install the driver for your operating system:

  for Windows 7

  Validity fingerprint sensor Driver V 4.3.205.0 sp55109

  OR

  for Windows 8

  sp58900 validity sensor V4.4.234.0 Win8

   

  ------------------------------------------------------------------------------------------------------------------------------

  HP SimplePass software below is compatible with Windows 7 AND Windows 8.

  • Download and don't have NOT yet installed:

  sp63224 HP SimplePass V0.100.276 Win7-8

  ===========================================================================================

  Rules of success:  Do not jump all the proposed stimulus / reboot sequences!

  ===========================================================================================

  Procedure

  1. uninstall your existing HP SimplePass software

  Windows 7:

  Control Panel > display icon > programs and features

  OR

  Windows 8:

  Windows key + X > F (opens programs and features >)

  Next:

  Search for SimplePass > right click and select "Uninstall".

  Once the completed removal > reboot / restart the program and log

  NOTE: If you have trouble to dismiss the current SimplePass of the system:

  1. Allows to remove the SimplePass Fixit program
  2. Restart / reboot the computer and log in

  ------------------------------------------------------------------------------------------------------------------------------

  2 uninstall and remove existing validity sensor driver

  Windows 8:

  Windows key + X > M (opens the Manager of devices () >>

  OR

  Windows 7:

  Control Panel > display icon > Device Manager >
  

  Next:

  • Biometric devices > Validity Sensor >
  • Right click on the driver Validity Sensor and "Uninstall" AND check the box Remove the old driver
  • Restart / reboot the computer and log in

  ------------------------------------------------------------------------------------------------------------------------------

  3 install the new driver:

  • Install your new / downloaded Validity Sensor driver - it's probably in your downloads folder
  • AGAIN: restart / restart the computer and log in

  ------------------------------------------------------------------------------------------------------------------------------

  4 install the software HP SimplePass

  Install the new package HP SimplePass downloaded from your download folder.

  ------------------------------------------------------------------------------------------------------------------------------

  Useful guide:

  Guide for the sensor of fingerprint laptop - HP SimplePass version 6

  Who can do it.

  Click on the star of congratulations !

  It's a big 'thanks' for the author's efforts to help.

• want to dv6 Intel core i7 nvi630m: operating system for laptop recovery

  How industrial get built in programs from my laptop when I lost the recovery DVD?

  Do you still have the original hard drive? Installers for most, if not all the applications of the plant are in the folder swsetup at the root of the C:\ drive. Always too, you might be able to buy HP recovery discs.