Hard drive imminent error boot error

Similar Questions

• Cloning hard drive with Clonezilla failed, gave a bad sector error message and now the original hard drive will not boot

  Original title: startup problem

  I tried cloning from my hard drive with Clonezilla, and he gave me a bad sector error.  I have since run the hard drive test in bios and it passed.  Anyway, clone has failed, and now the original hard drive will not boot.  My dvd player won't turn when I try to load the Vista repair CD (Vista Home Premium 32 bit).  Clonezilla removes the start settings for the original disc?  And if so, how can I restore it?  The computer starts just a black screen with a cursor at the top left.  When I install the hard drive in a box and connect it to another computer, it shows the partitions and files all seem to be there.

  Hi DougEisenmann,

  Clonezilla is not supported by Microsoft.

  If you are unable to boot from the Vista repair disk then you will need to go into the system BIOS and make sure that it is configured to boot from the DVD drive.

  Check out the link:

  Windows to boot from a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/Start-Windows-from-a-CD-or-DVD

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  See also the thread which has some troubleshooting steps for this same issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/Windows-Vista-crashedstartup-repair-wont-launch/49315171-1601-49DD-84fe-50bebd9ddbae

  The above link contains third party links provided by other users.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer

• Blue Screen of Death error - trying to replace hard drive but cannot boot from CD

  Hello

  I have a Dell Dimension 2400 running Windows XP which is about 4 years old now (everything is oem with the exception of the upgraded RAM from 256 MB to two 512 MB, mark PNY installed about 6 months ago). Recently my computer started to go to a blue screen saying "a problem has been detected and windows should now order to avoid damaging your computer equal not less or equal...". Technical information: STOP: x00000000A (0x00000002, 0x00000000 0x00000020, 0x804F9F45) the beginning of physical memory dump... ' etc. (the blue screen is shifted to the left, it is difficult to read everything). The BOS came intermittently, and after a reboot, it was fine, but it started to get worse and now returns immediately when Windows starts. When the windows would be fine I couldn't use a lot of programs (virus scan or anything that required for access to the files, I could also not download anything), because it says that the files were corrupt.

  I thought that my hard drive has failed or got a virus. I was not too concerned by the loss of what was on the hard drive. So I thought that I could by a new hard drive and start-up costs. I bought a western digital caviar is 250 GB. I installed and tried to boot from the CD that came with the new HD and reinstalled operating system CD dell (I entered the Setup menu to change the boot sequence for the CD first). It cannot start. It says press F1 to retry or F2 to go together to the top. Maybe I have other problems with the CD-rom, motherboard, or? However, everything worked well before the BOS began to appear. I've tried everything I can think of (which is not much, because I know little about this sort of thing). I'm getting very frustrated with it and appreciate any help that could be offered. I tried to include information relavent, but please let me know if you need more information. Thank you very much.

  
  

• Pavilion g4: hard drive 301 error

  I had a hard drive error 301 in my hp pavillion series. I understand that the hard drive has failed. I had replaced with a new one. I would like to know if I could always back up my old hard drive or to recover my files if I run it in a disk hard slave in another pc? Is there another way I can get back my old files?

  Thank you

  DAY

  If there is any life left in the drive, it is usually possible to recover some of the files. The simplest method uses a hard drive USB enclosure or a card. Then you plug it into a usb port on a computer to work and can browse the disc hard as internal hard drive. Copy files to the hard drive of the host computer.

  Ex:

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=2300574 & SKU = U12-42063

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=3276554 & catid = 3770

• Hard drive 4SNS HARD drive voltage error > SSD in iMac end 2012

  Hello - I replaced a HARD drive of 1 TB on an iMac 13.1, end of 2012 with a Samsung 850 500 GB SSD, closed and buttoned to the top of the machine without problem and started and attempt to restore backup time machine. This process completed 85% and then stalled. To restart, I'm stuck in a loop of the error. I ran diagnostic test and received the following code:

  4SNS/1/40000001:VH1R-0.000

  At first, I thought it was a missing thermocouple that many articles will guide you, but seems it's only on models 2011, not 2012 as in my case.

  I opened again and confirmed that the cables are well connected, represented diag and have the same error. Any other suggestions? The player would be bad?

  Thank you!

  Dan

  This error, as you already know, is for the hard drive voltage sensor. Replace the hard drive and EEA, what is happening. It looks like a bad SSD.

• hard drive detection error 2100

  My W530 just started displaying the error detection, however, Windows can still see the device, as well as the BIOS

  Windows it shows the real hard disk model.

  However, the BIOS shows as DRIVE.

  Does this mean the drive is failing (again), or is the SATA controller?

  This is a known bug. for anyone having problems (should probably post in the section windows 10), the problem is caused by the States of power enabling sata driver on the hard drive that does not support the bios.

  seems to have been fixed in build 9879

• laptop hard drive failure error 301 on my device

  a few descryption

  . device name - hp pavilion g61200 do you

  . the problem in the hard disk it displays SMART drive failure error (301)

  HP PAVILION DO YOU G61200 & O/S WINDOWS 7 ULTIMATE

  I want to know, what is the ERROR DISK HARD SMART 301

  with in a few days I am facing this problem in my device

  so, what can I do for this problem...

  Please tell me

  Hello

  Do a hard reset first.
  http://support.HP.com/us-en/document/c01684768

  The SMART drive test produces a prediction on the risk of hard drive failure, not a real failure.

  A warning to SMART disk error can appear for various reasons such as having been jarred abruptly computer or hard drive, be subject to the higher than usual temperature.

  Perform HP hard drive - wide test of the system BIOS Diagnostics shortly after switching on, tapping F10/F2

  If there are any Smart player or hard failure error you see, Hard Drive is a failure and the solution is to replace the drive.

  It would also be very wise to make sure that you back up all your files etc as soon as possible.

  Thank you

• 0xe0f00013 (new hard drive) retrieving error code

  Laptop model: HP envy 14 beats 1260se, windows 7 64 bit.

  OK, here's the story. A couple of weeks ago, I did a test drive and this error 'problem of intelligent control' came, and after spending some time on the internet, I discovered that I need to change my hard drive. I created a post as well, here is the link:http://h30434.www3.hp.com/t5/Notebook-Hardware-e-g-Windows-8/Smart-check-issue/m-p/2337229

  So now, I bought a new hard drive and the model is: 750Go momentus XT (link:http://www.amazon.co.uk/Seagate-750GB-Momentus-Serial-Hybrid/dp/B0068QO82G/ref=sr_1_1?ie=UTF8&qid=13... )

  I replaced my HD and so my recovery disks to reinstall windows and basically copy all the original files in the new HD. However, at the end of the restore process (7 discs), I received this error: "Recovery Manager could not restore your computer by using the original image. Please contact HP support. "Error code: 0xe0f00013.

  And then after I pressed 'Finish', he went on the screen of my laptop which basically a HP logo appears and it stops right there!

  I have no idea what to do now and it becomes really annoying!

  Thank you, Aria.

  Hi Aria,

  It seems that you bought a hybrid car and this is probably what causes the error when you try to use your initial recovery disks.

  Here is another solution, you can try which should allow you to load Windows 7 on your new HARD drive.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( must be the same version that originally came with your laptop - IE Windows 7 Home Premium 64-bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is Here. These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Downgrade from Windows 7 RC to Windows XP - no hard drive found error

  I have Windows 7 RC running on my DELL 8400 desktop computer and want to perform a new installation on Windows XP. Installation stops after the 1st (install Windows XP) screen with error message "No Hard Drive Found" and start again. I used to run XP OK on the machine before participating in the beta program. Please help as I am not ready to move again to the full version of Windows 7. My hard drive is a Western Digital 160 GB and the DELL 8400 has an edge Intel SATA Controller. Thanks for your help.

  Mike

  Hi Mike.

  You may be able to put the drive in the BIOS for a SATA legacy which will act as an IDE, which won't be visible when installing XP.  Otherwise, you need to get a copy of the SATA drivers, and then press F2 as the XP installation starts that will allow you to use the drivers that XP installation can see the SATA drive.

• My windows XP does not recognize an external hard drive. : "Error device malfunction.

  Original title: my windows XP do not recognize an external hard drive.

  I have Windows XP... When I try to plug in an external hard drive (with automatic installation of the software and the ability of usb 3.0/2.0), my computer does not recognize the material and gives an "error of malfunctioning of the device.

  Hello

  1. What is the brand and model of external hard drive?
  2. don't you make changes on the computer before this problem?

  Read the following article that may help you resolve this problem.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

• HP Pavilion dv6-2127el: hard drive full error test

  Hello.

  my laptop has recently a few teething problems, either when the bios starts (led will blink twice), either during the loading of Windows. The problem seems to happen especially the first time that I turn it on during the day, when I try 6-10 times before starting properly.

  I reinstalled the OS and nothing has changed. I did the diagnostic system and I got an error on the full Test of the hard drive:

  9AM66W-53S7G3-XD0021-61EC03

  all other tests passed.

  Thank you

  means that the drive is defective and needs to be replaced...

• Pavilion g6 2226tu: 'no hard drive installed' error in material diagnostics UEFI

  My pc is very slow and freezing much n after troubleshooting and consulted technicians on the chat, I went to the recovery. It's everything is OK with recovery but the same problem was there. N all of a sudden today I tried to restart it when it froze, it showed a blue screen with the error 'blackout driver State' it displays information is collected to be sent as a report. After 10 minutes, it ended at 100%. N he tried to restart, but he went to gray white screen after the execution of the repair automatic FIR seconds. After five minutes of waiting, I turned it off n tried to turn on n check with hardware diagnostic uefi. But he could not detect my hard drive of 500g. She appeared no hard drive or hard drive not installed message.
  Now what is it? My hard drive broke down, or it could be another hardware problem?

  He succumbed to a slow death for a long time, but now he is dead and must be replaced. Chances are that it is past the time what data could have been recovered. Sorry for your loss. If you want help replacement and software, we can do.

• Hard drive swapped error "windows cannot be authentic."

  Original title: the hard drive.

  I have two laptops. It is Asus but questions of power and screen and cannot be used. My other laptop is a dell but crashed I just took my Asus drive and put it in my dell. I start but says windows can not be real.  But it should be how can I get this drive to work

  Hello

  Questions: Have you used the Asus system product key to activate Windows on the Dell system?  This can be done if it is an OEM license.

  Did you clean the disk, and reformat/reinstall Windows on Dell system?

  Moving a hard drive to another system and re-use of product key for the Windows operating system

  http://pctechgo.HubPages.com/hub/move-a-hard-drive-to-another-computer-and-re-use-operating-system-product-key

  Can I move my system drive to another computer and make it work?

  http://ask-Leo.com/can_i_move_my_system_drive_to_another_computer_and_have_it_work.html

  Windows 7 displays "Windows is not genuine" with a 0x80070005 error code

  http://support.Microsoft.com/kb/2008385/en-us

  If Windows still shows authentic please download and run the Tool of diagnosis of MGA, post the results as well as troubleshooting previous steps.

  Support for the Microsoft Product Activation issues

  http://support.Microsoft.com/GP/cu_sc_prodact_master

• Windows 7 Home Premium loading of a new hard drive. Error 0 x 80070017, driver manager couldn't do.

  Windows 7 Home Premium loading of a new hard drive. Get error 0 x 80070017. Can not find the driver manager. How can I solve this problem and get Win 7 responsible?

  This is a new generation, the motherboard Intel DZ68DB Media Series for processor LGA1155 albums, office.

  I am a bit stuck!

  Check out this link

  http://search.Microsoft.com/en-us/results.aspx?q=0x80070017&x=11&y=8

  Good luck.

• Hard drive failure: error 2000-0142 since current default Scan PC.

  Original title: error 2000 - 0142

  Activities of PC by default Scan on my laptop DELL Inspiron 5520. Hard drive failure: 2000-0142 error what does that mean?

  REDA

  According to the answer by a representative of Dell here:

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19467468/20188938.aspx

  It seems that the error means what it says - the hard drive has gone bad and should be replaced.

  I highly recommend that you only backup your data to another drive immediately and then contact Dell for confirmation about the error and advice on the best course of action.