Hard drive Xbox

Similar Questions

• Can I use my Time Capsule as an external hard drive for my xbox one?

  My Xbox One has only to a 500G hard drive, so I can't download all my games.  Can I use my Time Capsule instead?

  I don't think so.. An Xbox supports USB drives.

  http://support.Xbox.com/en-us/Xbox-one/games/manage-storage

  It will be the reformat format xbox for games... you can not download games on general storage... you can use it for the media.

  http://forums.Xbox.com/xbox_support/xbox_one_support/f/4269/t/1974401.aspx

  Any SIN should work as a source for the media... but TC is a mute like a hard disk of Board of Directors in a router if you still need a PC to offer support to the network.

• My xbox does not recognize my hard drive, but my pc detect in Device Manager.

  Well one day I had the prototype 2 for my Xbox I played it for a while then I turned it off to get something to eat and when I turned it back on this subject came up with sign in screen with no profile and when I went to the storage screen I had no storage devices listed. I took the hard drive of the xbox and it plugged into sata port in my Manager PC shows and peripheral, the hard drive is connected and a mod tool / HDD called horizon Explorer detects all my data just the way which she was left and I tried my step dads Xbox and it does not work that I can have help?
  p.s the punctuation is not very good, that is not my strong point

  Hello

  1. what version of windows operating system do you use?

  2 did you receive an error message?

  I suggest you to see link and check.

  Troubleshooting Xbox 360 hard drives

  http://support.Xbox.com/en-us/Xbox-360/settings-and-initial-Setup/hard-drive

  I also suggest you to contact Xbox support and check.

  http://support.Xbox.com/en-us/?XR=shellnav

• How to save games to DVD on the hard drive in my Xbox 360 console

  Xbox 360 slim

  Hello - can you please tell where I can find how to record DVD games on the hard drive in my Xbox 360 console so that I didn't need to play DVDs. thank you m

  Hello

  Check with their forums and XBox support.

  XBox - Support
  http://support.Xbox.com/en-us/pages/default.aspx

  XBox - Support Forums - and my XBox (top-right)
  http://forums.Xbox.com/

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I can't transfer data from the old hard drive to the xbox 360. New xbox wants to format

  I have an easy transfer cable, and if it is connected to old hard drive to the new xbox. The new xbox recognizes the storage device but wants to format and doesn't give no option to transfer data. Obviously to format the disk will delete the info. Anyone has any suggestions or ideas birght!

  The X - box forums are here: http://forums.xbox.com/

• Network external hard drive for media sharing on Xbox 360

  Hello, I just got a new external hard drive. I put a bunch of video files and music to share with my xbox 360. I use windows media player to make the media sharing. I got no problem with it for my regular hard drive in my computer. The first time I plugged my external hard drive to my computer and transferred the files added to the library, it worked fine and the xbox it would be. But after that I restarted my computer, my xbox can't see my external hard drive. I gave her a permanent using MMC drive letter and drive management. But for some reason any xbox will simply not show more. Any ideas? Thank you.

  I had the same problem

  1. Reset the wmp library
  2. Turn on file sharing for each folder on the external hard drive, including the player itself using the same settings.

  3. remove the Xbox 360 exceptions in your firewall

  4 Restore Xbox 360 to your firewall exceptions

• Xbox to PC external hard drive sharing

  I have my xbox connected to my pc wireless and when I use the video player for the xbox 360 I can access to the my videos folder but shortcuts to my external hard drive are not displayed. How would I be able to use the connection to access my hard drive using my xbox?

  Hello

  I suggest to check and make sure you have your shared external disk so the Xbox can see and have access to these files.

  It will be useful.

• External hard drive Canvio Basics 2.0 TB/To - device connection issues.

  Hello

  I recently bought an external hard drive and I can't connect my computer's hard drive. (Toshiba Canvio basics 3.0 - 2, 0 to/To - Usb 3.0 and 2.0)

  There is a pop up message saying that the device has been installed, but when I go to 'my computer' hard drive does not appear.

  Does anyone have suggestions on how this can be corrected? Any help would be greatly appreciated.

  Thank you

  Claire

  I thought that I should add a little more information...

  I tried to access the device on a computer, 2 notebooks, 2 TV and an Xbox, so it seems that the hard drive is the common problem.
  In addition, the drive appears in device under disk drivers Manager and he said that the hard drive had no problem but I can not access the hard disk.

  Thanks again

  Claire

• Hard drive and windows 7

  I put the external hard drive Toshiba PX 1394u. It worked amazing on my windows XP computer, however I recently moved and brought a computer laptop windows 7 and my hard drive does not work as well as it did on my windows XP (unable to copy files and sometimes does not recognize). It works on my xbox 360 but not my laptop.

  Y at - it ainyway to get my hard drive to work with windows 7?

  What is an NTFS drive? If so, I think you have a problem with its security settings. Pull up the drive properties, click the Security tab and see who can do what - I hope you can see the 'names' on your old laptop. I suggest a google for 'NTFS disk permissions' and I think, you will find step by step guides to sort.

• My external hard drive crashed with my account and profile information, it is possible to recover?

  The external hard drive that I had hooked my Xbox crashed.  It was my profile and my live account on her info.  Is it possible to recover all or part of the info.  Cannot find my direct membership (membership 1 nyear, left approximately 10 m ois) card.

  Hi drfordelgin,

  Unfortunately if the hard drive has failed, there is no way to recover the drive information other than contact a paid and professional data recovery service to recover.
  I hope this helps.

• Formatting an external hard drive to FAT32 using vista

  Hello

  I own an Xbox 360 and a Windows Vista-based computer.  I wanted to store music and movies on an external hard drive and connect it to my Xbox 360 so I can make use for more then just a game.  I first tried this using a 2 GB USB key and it worked better then I could have hoped.  However, given that 2 GB does not go very far, I went out and bought a FreeAgent 1.5 TB drive external hard.  I can use it in Vista and works very well, but it does not recognize the Xbox 360.  I read in a forum that the 360 requires the external hard drive to FAT32, but Vista cannot format the disc in all except exFAT and NTFS.  How can I get the external drive in a format that can recognize the Xbox?

  Thanks in advance.

  Hello, Durandal95

  Please use the Forum for answers.

  You can format a drive using the FAT, FAT32, exFAT and NTFS filesystems using the format command-line tool.

  WARNING: Formatting your drive will completely erase it, exercise caution when you use the format features.

  To do this, go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. In the command prompt window, type the following command and press ENTER: format X: / FS: FAT32 / q
  Note: Replace X: the good reader.

  You can find help on the XBOX on both, the help and the community pages:

  XBOX Help: http://support.xbox.com
  XBOX community: http://www.xbox.com/en-US/community/

  I hope this helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• External hard drive in the Device Manager but not in disk management

  So I have this external hard drive Western Digital 1 TB. I've had for over a year now and it was working fine. I would like to trade my XBox 360 and the computerregularly. Then one day I brought home, plugged into the computer and nothing. My friend and I couldn't understand anything. We have gone as far as removing the hard drive and put it directly into the computer. I have reviewed, that he has lost.

  Then yesterday, on a whim, I tried to connect it again to the USB port. It is presented in the Device Manager but says that its drivers have not been installed. Then, I changed the USB ports on the back of the computer and as if by magic, that this is once again. I had full access. Stupid (and you can see where this is going) did not immediately transfer anything off the hard drive. I'm looking for an image and listen to a song off of said hard drive when the drive went suddenly not recognized.

  I can see now the reader in the Manager of devices under disk drives, and USB devices. However it does not appear in the disk management window. And Yes, I checked as well the Productdocumentation upper and lower, that it is not listed. Go to the area where you assign drive letters not shown not be. Normally this is E:.

  I also tried to remove the UpperFilters registry in regedit. It was not to remove LowerFilters. Obviously, that didn't work or the other.

  I tried several cords and all my USB ports with no luck either.

  I went on the WD Web site, but they do not offer anything other than a partitioner that I would save rather than as a last resort as there are a number of things on the hard drive I want to save.

  So it's not like it's a new HD to be partitioned or an old man who comes out crapped. I know there's the data I just need to get home long enough to get what I need. Maybe I missed my window, but maybe I did not. Maybe someone can help. I'm at the end of my mind on this thing.

  Sounds like a problem of partition (maybe corrupted partition tables) if the device is recognized, but not the 'disk '.

  There are recovery/repair partition about tools.  Western Digital actually have some but I think that they are made for internal drives.

  If I were you, I start with WD and start looking for partition recovery/repair tools.  If this is the problem then it is the right kind of problem and you using the right type of solution can fix it easily.

  If this is not the case, some data recovery tools can help you recover some files even if you have to recreate a new partition, although I wish you much luck with this approach!

  Good luck whatever you try and make sure that you do not overwrite the what partition information, you have without making backups (many partition edititing software will offer backups)

• I enable sharing of external hard drive and it works. So when I got the pc power down is no longer share external hard drive. I have to reactivate every time sharing and reset the library wmp it becomes very old.

  Share an external hard drive for xbox. When computer I disable and re-enable sharing settings restore default to the external hard drive. When I re-enable sharing he does not always up to this I have reset the wmp library. I ran the fix nothing works computer center.

  Thank you guys for help. I actually already fixed it. I used to turn on sharing for just the hard drive and not the subfolders. I enabled sharing on the hard disk files and sub using the same exact settings and it seems that its fixed...

• When I deleted a picture of my MacBook, why it also remove the external hard drive?

  So I tried to help my wife to free up space on his MacBook Pro by putting all of his photos on an external hard drive. After iPhoto slide the hard disk and wait 40 minutes so that he could transfer, I wanted to make sure it worked. I ejected the disk and then plugged in. Of course, all iphotos were still there. Just to be sure, I deleted one file in the folder on the computer's iphoto. I went to my shock and horror, the external hard drive, that it has been deleted it too! How is that possible? I've been scouring the Internet trying to retrieve this file with no luck. It was not in the trash. There is a tab "recently deleted". Time machine was not turned on. iCloud shows nothing. I can't download any software, because the computer is completely filled. How is it possible that by deleting this folder on the computer he did also leave the hard drive? AND it has not been saved in the trash? I have used PC, and whenever I need something in return, he was ALWAYS in the trash. And if I deleted something on the computer with an external hard drive connected, it would NEVER be removed from the external hard drive at the same time. I'm so frustrated and feeling SO bad that I deleted a folder with important pictures of our kids. Is that what I can do to recover the pictures? Any help is greatly appreciated.

  You used Time Machine at all? I see you say it was not on, but it never on and is at - it a backup Time Machine on the Macbook Pro?

• How to change back to SSD HARD drive?

  My mcbook pro comes with the original 500 GB of HARD drive. When he ran with a problem, I went to an apple repair shop. Problem was in the charts, and he suggested the HARD drive to be replaced by a 120 GB SDD. So it has been replaced, but the guy on the left HARD drive as a storage device. Moment where DDI is left with small space and when I update to OS X El Capitan of OS Sierra, it had to be installed in the HARD disk drive. Could someone please give instructions to install the new OS to the SDS to lose all my data and the current configuration and it is also possible to install windows XP on the HARD drive and 10.  Either by the way, I got Windows 10 and XP shared with the SDS via parallels. Thank you

  I think this can be useful for you:

  How to use an SSD with your HARD drive If you want to use an SSD as boot with your existing HARD disk drive, as the disk 'data', here is what you can do. After installing the SSD, you need to partition and format the SSD using disc utility disc. Then install OS X on the SSD. Once installed OSX boot from SSD. Startup disk preferences to set up the SSD as the boot volume. Open the preferences users and groups. Click the lock and authenticate you. Or CTRL - RIGHT click on your username account list in the sidebar and select Advanced Options in the context menu. You will see a field called "Home dir: ' on the far right, you will see an Edit button. Click on it. In the file dialog box, navigate to the location in house now located on the HARD disk (disk HARD/users/user_name /.) Select the folder, click the Open button. Restart the computer, as shown. When the computer starts, it will now use the home located on the HARD drive folder. Another more technical method involving the Terminal and the alias is discussed in depth here: using OS X with a SSD and HDD - Matt Gemmell configuration. It's my preferred approach because I can choose which records of the House, I want to on the HARD drive and I don't want to. For example, I like to keep Documents and library files on the SSD because I frequently access their content. Make sure that you keep the bootable system entirely on your HARD drive where you need it.