hard drives are not displayed except c:
After a power failure and strongly fluctuating I fell from my PC and after when I turned it on, I think all good except local disk
Hi xdeeep,
As readers do not appear in disk management, the problem is likely related material.
Check if the drives are detected properly in the output system BIOS (Basic). If they are not listed, it is possible, that the discs are damaged.
If the drives are listed, try to perform a system restore.
System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.
How to restore Windows XP to a previous state
Additional reference on:
System Restore Windows XP is easy to use
Tags: Windows
Similar Questions
-
I got an asus computer notebook windows vista, upgrade from vista to windows 7, now I'm not able to do a clean install of windows xp, when I try to install XP, it says that hard drives are not connected & windows cannot find not the hard drives, so once again installed windows 7, is there a way to overcome this problem Why do I get the message windows xp does not detect hard drives? I even formatted the hard drive & tried to install Xp, but still, I get the same message.
The answers will be appreciated...
Thank you
Because the Windows XP installation CD does not have the necessary disk controller drivers. You will need a floppy drive to provide the drivers of controller for the installation program, or you will need to burn a CD of Windows XP with the controller drivers slipstreamed into the installation. A CD of Windows XP with SP2 included may have the necessary drivers.
John
-
hard drives do not display, window 7
my laptop is showing message no operating system found and it's also appears not all hard drives when iam trying to format! Help me
If you have any non-essential devices external hard drives connected to the system, unplug them. They might interfere with installation. If you have more than one internal hard drive attached, disconnect all except the disk target hard where Windows will be installed.
The hard drive is recognized in the BIOS?
Are you sure its fitted and correctly connected?
Try the following
Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)
Press SHIFT + F10 from your keyboard
type the following commands
DISKPART
Press enter
the list volume
Next, you select the volume where you want to install Windows 7
Type: select disk #.
# represents the number of the volume
Type: clean
convert mbr
create the primary partition
assets
format fs = ntfs quick
output
output
-
external hard drive is not displayed in disk utility
I have a drive (2 TB) seagate desktop external hard, while the backup time machine HDD power adapter was pulled from the socket. Now the hard drive is not recognized (both on the utility disk and office) of my mac pro book works on os x el capitan, seeing the hard drive is disabled, but I can feel and hear the operation of the hard drive. Also when I hang up my iMac running os x yosemite on the hard drive can be used and seems to work very well.
I tried to reformat the hard disk, but it has failed it is still not recognized on my mac pro book
Hello amartnez,
Thank you for using communities of Apple Support.
From your post, I see that your drive external hard seagate was pulled from the socket during backup with Time Machine, and now it is not recognized by your MacBook Pro. I know how it is important to ensure that you are able to connect your external drive to your Mac. I have something I want you to try.
Because the external hard drive seems to be working on another computer (iMac), please try a different USB port on your MacBook Pro and see if it recognizes the external hard drive on the desktop and in disk utility. If so, that means you have a problem with this specific USB port on the MacBook Pro.
See you soon!
-
Seagate: the external hard drive is not displayed in my computer
My seagate external hard drive does not show in my computer and also the Disk Manager but its shown in Device Manager. help out me. I have a lot of data in it.
Nitesh salvation,
Thanks for posting your question in the Microsoft Community forums.
I understand from your description you have posted, that the external hard drive is not recognized by the computer of Windows 8.
Before you continue with the troubleshooting steps, please answer the questions below.
(1) have you checked with different ports or different computers?
(2) remember to make changes before this problem?
(3) you are able to detect the drive in disk management?
I suggest to follow the steps below and check if the problem persists.
Method 1: Run the troubleshooter of material and check out la.
Follow the steps to run the Troubleshooter:
(a) press the Windows key + C on your keyboard to show the charms.
(b) type of Troubleshooting , and then click solving problems under settings.
(c) now, type Hardware Troubleshooter in the option Search .
(d) click on hardware store to run the troubleshooter.
If you are able to detect the drive in disk management, I suggest you to assign a letter.
Method 2: Assign drive letter:
The disk management.
To assign a drive letter if it has not already received, click Add, click the letter you want to use, and then click OK.
To change a drive letter, click on edit, click on assign the following drive letter, click the letter you want to use and then click OK.To remove a drive letter, click on remove and then click Yes to confirm that you want to remove.
You can also check out the article below and follow the instructions.
Why isn't Windows does not find my device?
Hope this information was helpful, if you need help, feel free to post. We will be happy to help you.
-
HP Envy Ultrabook 6 t-1000 CTO: HARD drive is not displayed
Hello.
I had the Windows Blue Screen of Death (BSOD) once or twice when using simple everyday applications on my Ultrabook. The results were either not different on Mode without failure. After awhile, I started having 'No Bootable disc' error while starting up. Recovery (press F11) will not appear so. I tried the HP Diagnostics (by pressing F2 at startup) and Test the hard drive as well as the Test of memory shows PASSED on the formats of short or long.
I tried the following:
1. I did some research on Google and entered in the BIOS/Insyde utility (by pressing F10 at startup), loaded default installation (by pressing F9), saved changes and did a restart, but I get the error again.
2. I downloaded Windows 7 64-bit Microsoft store, created a boot USB and plugged. I was able to access the Windows Installation Page, but he wouldn't show my hard drive at all.
3. I find the support page of my product on the site HP and downloaded the latest drivers, put it in a USB device and booted up the system from the Windows Setup disc. On the page where it was supposed to show my internal hard drives, it showed only USB drives and there is an option "Load Driver" I clicked on and selected the driver files I downloaded from the HP website. Everything was going well until I chose iaStor.inf... this time, the system has hung up and the BSOD appeared with an error stating the file 'iaStor.sys '.
My questions:
1 if diagnostic Tests are passed, I can assume that the material is well?
2. Although I already placed an order for HP recovery discs, I doubt if it could help because my HARD drive drivers seem to be missing. What is your opinion?
3. is there a way to reset zero/reload drivers BIOS/Insyde utility?My system features:
Laptop model: PC portable HP Envy 6
Product no.: A9G58AV (the back panel laptop says A9G30AV)
{Information}
Processor: 2nd generation Intel Core i5 - 2467 M CPU @ 1.6 GHz + Intel HD Graphics 3000
BIOS version: F.0D
Total memory: 4 GB
Operating system: Genuine Windows 7 Home Premium 64-bit
HARD drive: 500 GB 5400 rpm SATA RAW 7mm hard drive with 32 GB WSSD faster reduction of the hard disk CacheUnfortunately at that I disagree with Paul and I think that you may be looking for a bad motherboard, but we would like first to try to remove the disc of WSSD 32 gig.
Here is the Manual:
See Page 40. Unfortunately, this model is a little difficult to disassemble, but measures are set out in the manual. If it is still under warranty, you can't do that. If the hard drive passes the test of F2 then I tend to think that it's not the hard drive.
-
External hard drives are not recognized by Lr4
When I plugged my two external hard drives to my computer this week, Lr4 does not recognize them. Each folder has a question mark by it.
Appreciate any help... Thank you!
Dave, none of us "aid" are employees of Adobe, we're all users just like you... it is a user forum where we all help each other.
Return to the specifics of your problem, "eject" is a function, you should find the area of the Windows taskbar system tray, but you may need to click the little pointing up (marked in blue on the attached screenshot) arrow to 'show hidden icons', which will reveal a bunch of other icons and the one you need is marked in red. Click on that to reveal a list of devices that can be ejected, select the one you want and wait to be advised that it is safe to unplug.
To be honest, I would never disconnect a drive just unplug him.
Regarding your other external drives, like I said that Windows will assign the first available drive letter, unless you use the "edit the drive letter" option to assign a specific drive letter... in this case Windows will remember this assignment and will subsequently always use this letter provided it is available at the time of reconnection. In other Windows do not book the drive letter, but it will use it if it happens to be available.
For this reason that I attributed to all drive letters my backup hard drives that I regularly remove after use, so I know I will always get the same letter each time (which is fundamental to my backup strategy).
-
external hard drive is not displayed when connected
I have a WD My Passport external hard drive. He pointed upward and it worked fine. Two days ago my MacBook Pro started acting strange and became UNBELIEVABLY SLOW. Now it is still slow with some programs, and when I plug in my external hard drive it won't even appear on my desktop or the finder. I restarted my computer - has not yet shown and I stop everything, everything, including the power cable disconnected, is to let it sit for a few hours, transformed, plugged return it in and still don't appear. It has pictures and that's what I use to store photos that I have him Add. I need help! I am a photographer and it is essential that it works! If anyone has any suggestions please let me know! Thank you for taking the time to read this and any help! Thank you!
Does show in disk utility? Have you plugged into another Mac?
Ciao.
-
Satellite A135-S4487 - new HARD drive, are not not on the desk
I have an A135-s4487 with two hard drives, the two 120 GB. I wanted to increase one of the discs with a 500 GB hard drive. I replaced the 2nd hard drive with the new seagate Momentus 500 GB disk. The computer see the drive on the list of devices but cannot see under computer or use it.
Someone else has had this problem when changing drives, drive is too big and two disks must be of the same size? My OS is the smallest disk. I put the old drive to 120 GB in computer and everything works fine. Thank you
Running Windows 7 with 4 GB of RAM
Hi simirob,
> The computer see the drive on the list of devices but cannot see under computer or use it.
Yes, because you must create a partition and format everything first before you can use and it s listed under computer.Here's a very nice guide how to use the Windows disk management feature to create the partition, format the drive, etc.
http://APS2.toshiba-tro.de/KB0/TSB7101OB0006R01.htm -
Hard drive is not displayed full size
Hi all... This is my first post in the forum and hope to share details on the problem that I am facing with my portable Smart Touch PC envy.
My Lptop configuration is as follows:
The problem started when I went to a recovery of windows from the HP Recovery Manager. Initially, before my C drive recovery showed as a space of nearly 500 GB.
When I went for a recovery the first time she abandoned and then again started the recovery, which succeeded. But to my surprise, it gave me two options to start in one was Windows 8 and the other HP RM (ESP). As usual, I chose 8 Windows and the laptop started fine, but to my surprise I saw that my C drive was reduced to 80 GB instead of the 450 + GB of space I had earlier. I searched the net and found that HP RM (ESP) was another partition and I could delete it by typing msconfig and then switch to the tab startup and remove the HP RM (ESP) OS and just delete. It also worked well for me, but I am still unable to use the full of the hard drive I have. Support HP can tell me what I need to do to recover the complete HD drive.
you need to expand your partition to occupy unused space.
Run > diskmgmt.msc > enter
This will bring up the Disk Manager. Right-click of the 80 GB partition and expansion through empty space.
-
Install hard drive does not display complete space after failure bootcamp
If this problem is shallow, but I did a ton of research, and I'm stuck.
I tried to install Windows 10 with the BootCamp assistant and there was a mistake and restarted my MBP (mid-2015, 2.8 GHz Intel Core i7, 16 GB 1600 MHz DDR3, 1 TB SSD). Upon restart, the partition of windows seems to be there, but when I tried to start Windows (restart now option key), I found myself with only one option, which was to start in Mac OS X. Fine. So I started in Mac and went to the wizard bootcamp again and this time, I had the option to remove windows, so I did, which was good, because I was going to just to try new BootCamp assistant...
-BUT (here's the point of this post)-
After the deleted bootcamp windows partition Wizard, my Mac partition was left on its reduced size, which is 901,34 Go (before "assistant" training camp, I got 999,35 GB, it's a 1 TB drive).
I did a lot of things to try to remedy this situation, but nothing seems to work:
-J' resized the partition in disk utility (which continued to give me errors, until I turned off FileVault), so now my SSD shows only a single partition to 1 TB in size.
-J' tried to run first aid on both the disk (SSD Apple) AND partition (Sean HD), but which shows all go well.
-I went through the Terminal to run the/dev/disk0 repairdisk diskutil command and it seems that the partition plan seems to be OK.
I would avoid using testdisk, because I think I would mess something up, but if I have the right direction, I could predict the future.
I DON'T want to format the drive and start over, because I would be really sad to have to reinstall/remake ~ 800 GB of things again (I am a music producer). And, Yes, I backed everything up, but again everything is too tedious (do once was quite tedious as it may be).
You notice you have a recovery of 98 GB of HD, which is usually about 650 MB? What were the exact steps you have taken to address the issue that you have after that BC did not work correctly? Did merge partitions incorrectly?
-
Envy laptop: my external hard drive are not
PC listed on but Device Manager does not list it on the devices and drivers. Thus prevents me to record anything there or use it as a backup destination.
Yes diskpart is the version of disk management command line. Your player is set up for a Mac and won't be used with a Windows machine so much that convert you on Windows. Do you still have the Mac? Save the data that you need and you can even use the disk utility Mac OS to remove the partitions on the disk and make it white. Windows could then prepare it for use on a Windows machine. Or you can use Windows diskpart. The disk management interface will not work. Converting from GUID on the MBR will erase all data on the disk. It's actually not even necessary convert to MBR... 8.1 Windows will read a GUID drive very well, but it must be formatted in NTFS and not the Mac OS extended (journaled) that is used with the Mac. The link I gave above contains instructions to know how to completely erase (clean) the drive using diskpart Windows command line.
-
How can I change the icon associated with an external hard drive that is displayed in my computer
When I double click the icon my computer on my Seagate external desktop hard drive does not display the correct icon. It displays a blank page with the upper right handed with a superimposed replica of a small screen. I really want to show an icon that looks like the real thing as stated in the icons folder.
Hi PhilipRoebuck,
(1) do you get an error message when you try to open the external hard drive?(2) where there are changes to the computer before the question?(3) is confined to a specific icon?See the following:Method 1:Icons change incorrectly in WindowsImportant Before run you this difficulty, save your data and close the application. After you run the difficulty, your computer will reboot after 10 minutes.Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756Method 2:How to change the default icons for folders in Windows XPI hope this helps. -
Hard drives does not after created vm web client
I'm under esxi 5.5 with the web client vsphere. When creating a virtual machine through the customer web of hard drives are not appear. I go through the process and click Finish and everything will check fine no errors, but when I go to edit the virtual machine without hard drives are showing. Now, if I create the virtual machine via the vsphere client it all works. I tried in the client web creation v10 and below the virtual machine and still the same result.
Just solved the problem. I went ahead and reset services and it works now. The weird part is that the hard drives or specific devices have not been created and there where no errors at all. I guess that the constant permutation between vsphere and web client cause something in the background
-
during the upgradation he automatically took backup to an external flash drive, now every time I have to run has previously program I have to insert this flash drive.
also all the shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created so that the flash disk is reinsertedHi subhshy001,
Welcome to the Microsoft Windows answers Forum community!
Try this if you do not have
Windows Explorer to create the folders and shortcuts in your document folder, drag and drop them on your desktop.
If you have completed the steps and was not even useful,
Follow these steps:
Try to create a shortcut and sending it on the desktop.
(1) open: Start Menu ,.
(2) right-click: Internet Explorer icon .
(3) select: send to > desktop (create shortcut).There should be a shortcut on the desktop .
Make sure that the "show desktop icon" has a check against it
OR
Just click on the empty part of the desktop, choose new > then select the folder to create. Right click on this folder , select Rename it.
If the steps above do not work then:
You can scan your computer for malware.
You can download, install and update anti-malware free of your favorite search engine and find malware.
Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.If the scan comes back clean, so I recommend doing a System File Checker too l to analyze your OS system files.
To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:
1. open an elevated command prompt . To do this, click Start , click principally made programs , Accessories , right-click guest , and then click run as administrator . If you are prompted for an administrator password or a confirmation, type the password, or click allow .
2. type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.Hope this information helped!
Thank you, and in what concerns:
Aziz Nadeem - Microsoft technical support.
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
I went to about: config and clicking browser.newtabpage.enabled clicked on it and then right click and rest, then went to browser.newtab.url and clicked on it and then right click but reset is not active, so can not click on it. How can I get the mos
-
airplay does not appear my i6?
Any suggestions to solve this please
-
C: 1050 1050c C6074A 0B 0006 EMod compatibility Question
I have a client with a probable error of EMod, customer is a few hours away from the office, it is not practical to stop for the diagnosis. I remember reading an article online about compatibility EMod seven or eight years and I think it says the onl
-
Satellite series battery would not charge
Hi allMy laptop has an unusual problem. It does not load, I changed the charger also but still i m having the same problem.I don't know what the problem is... so please if anyone has any idea what can be the problem and the solution that made me know
-
If the processor will work with computer
I have the HP s5610f and I was wondering if the AMD Athlon X 2 280'll will work in my computer without modification? I'm trying to get the cpu faster than can handle my stock setup and it seems to be.