Install hard drive does not display complete space after failure bootcamp

Similar Questions

• Toshiba Stor.E Canvio HARD drive does not appear

  Hello

  I got a Toshiba Stor.E Canvio for about 2 years without problems

  By using the external drive recently and the USB cable is removed accidentally. After attempting to connect the USB on my Mac again once the external HARD drive does not appear in the Finder.

  Passing through the disk utility, the hard drive is visible, but I am unable to check or repair the disk.

  The message I get is

  "Peut-t disk utility repair this disk. "Save as many files as possible, reformat the drive and restore your backed up files.

  The HARD drive itself is turned on, the light is on... but I'm stuck now

  Any help would be appreciated

  Gary

  I m not iOS expert and, therefore, I cannot recommend to any advanced troubleshooting but recommend you check out this thread:
  http://Apple.StackExchange.com/questions/130304

• my computer detects the usb pen, but when I try to send files to it in "send to" my hard drive does not appear.

  Usb detects the dvd player and my external hard drive, but does not detect my hard drive. I tried to disconnect the external hard drive, but still, it does not detect my hard drive. The drive letter is E: and pen usb H: external drive letter is F: HELP!

  When I try to send files to it in "send to" my hard drive does not appear

  What hard drive, external or internal? Normally only removable devices appear in the mailing list.

  You could use copy and paste instead, or see the following article...

  http://support.Microsoft.com/kb/310270

  .. how .to add items to send it to the list.

  Tricky

• my hard drive does not work, I can not download my antivirous

  my hard drive does not work, I can not download my antivirous

  Here are a few articles with possible solutions and its fix for the hard drive problems.  Maybe at least will help any problems you encounter.  I could have provided more targeted recommendations if you had provided more information about what the problem is exactly, when he started, the manufacturer, make and model of drive, how the player does not work - is that it recognized by the system, it appears in Windows Explorerr, the door opens when you press the button...  If the following text does not, provide this and more information about the problem and your configuration maybe we can provide additional assistance.

  Compliments and thanks to the spirit of another thread:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.microsoft.com/gp/cd_dvd_drive_problems - A Mr Fixit

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Seagate: the external hard drive is not displayed in my computer

  My seagate external hard drive does not show in my computer and also the Disk Manager but its shown in Device Manager. help out me. I have a lot of data in it.

  

  

  Nitesh salvation,

  Thanks for posting your question in the Microsoft Community forums.

  I understand from your description you have posted, that the external hard drive is not recognized by the computer of Windows 8.

  Before you continue with the troubleshooting steps, please answer the questions below.

  (1) have you checked with different ports or different computers?

  (2) remember to make changes before this problem?

  (3) you are able to detect the drive in disk management?

  I suggest to follow the steps below and check if the problem persists.

  Method 1: Run the troubleshooter of material and check out la.

  Follow the steps to run the Troubleshooter:

  (a) press the Windows key + C on your keyboard to show the charms.

  (b) type of Troubleshooting , and then click solving problems under settings.

  (c) now, type Hardware Troubleshooter in the option Search .

  (d) click on hardware store to run the troubleshooter.

  If you are able to detect the drive in disk management, I suggest you to assign a letter.

  Method 2: Assign drive letter:

  The disk management.

  To assign a drive letter if it has not already received, click Add, click the letter you want to use, and then click OK.
  To change a drive letter, click on edit, click on assign the following drive letter, click the letter you want to use and then click OK.

  To remove a drive letter, click on remove and then click Yes to confirm that you want to remove.

  You can also check out the article below and follow the instructions.

  Why isn't Windows does not find my device?

  Hope this information was helpful, if you need help, feel free to post. We will be happy to help you.

• Toshiba canvio 1 TB portable hard drive does not work with windows 8

  The drinking Toshiba Canvio 1 TB hard drive is compatible with Windows 8?

  Hi Michael,

  Welcome to Microsoft Community and we are happy to help you on this question.

  According to the description of the query, the Toshiba Canvio 1 TB portable hard drive does not work on the computer.

  I ask you to answer some question in the context of this question:

  Do you have an error message when you try to access the hard disk on the computer? If Yes, what is the exact error message you get?

  I would like to inform you that the Toshiba Canvio portable hard drive is compatible with Windows 8.

  You can check the link to verify this compatibility with Windows Compatibility Center:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Toshiba%2Bcanvio%2Bportable%2Bhard%2Bdrive%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Please answer us with the required information on this issue in order to help you.

  Let us know if you have other Windows related issues.

• When Lightroom does not display color space?

  When Lightroom does not display color space is assigned to an image? It should be in the metadata Panel. In Bridge, it displays color Mode: RGB/B & W and color space: sRGB/Gray Gamma 2.2. Or Lightroom all converted Adobe RGB or ProPhoto RGB?

  The ExifMeta plugin (free) will show the color profile in the metadata Panel.

• Problem with installing Windows on a hard drive, HARD drive does not get detected after installation

  Original title: help with hard drive of the computer.

  Flow of the problem:

  My aunt tried to install windows 7 on the previous copy of windows 8. Needless to say that it doesn't work and it has messed up the hard drive. So, I bought a vacuum. I formatted the hard drive using my other windows computer to have 2 partitions: a boot partition and system partition, and then used the program WinToUSB to install windows on the hard disk. The reason I did it is, because no matter how many times I changed the BIOS in my laptop of aunts, it wouldn't boot from the DVD player to load the windows software. After a few hours, I found WinToUSB. Once windows has been installed, I plugged it into the laptop. For a few hours, I didn't know what to do, because the computer does not recognize the hard drive (he said: "Not detected"). I decided to start from legacy, and then the screen deals

  «intell...» »

  and a bunch of dates, etc all the stuff on the screen to load legacy if you know what I mean.

  He said "not plugged in the media. Check the power cord.

  Then quickly changed screen before I can read almost anything and it goes to the normal windows screen black (with 4 colors). I said to myself, how can he be loading if the hard drive is not detected... Once it is loaded, he brought me to the blue screen (blue screen of death, if you want) I turned the computer on again, always noticing the hard drive was not detected. I ran all the recovery/repair options I could and turned off the laptop. I came back a few hours ago and I loaded the computer again and went into the BIOS.  He said that the hard drive has been detected and said the news about this, as usual. However, at the start of the legacy of windows loading screen, it said still not detected.  I then started to windows to see since it is now detected if that fixes the blue screen. Yet, there is no. I tried to go to the normal windows and screen remains blue. any ideas?

  Hello Chris,

  Thank you for visiting Microsoft Community.

  According to the description, it seems that Windows was not properly installed on the hard drive. I'm not sure how to work the software from third-party manufacturers WinToUSB and reliable installation process is. Microsoft does not recommend using any third party tool to install Windows on your computer, the use of these third-party tools can cause serious damage to your computer.

  I would say to format the hard drive once more and try to install Windows through normal Windows installation process.

  Refer to the section "using the installation option custom if no operating system is installed" in the thread below.

  Installing and reinstalling Windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  If you are not able to install Windows on the hard drive at all, I suggest you to contact the hard drive manufacturer to obtain a diagnosis of material performed on the hard drive.

  Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• Seagate 2 TB external hard drive does not register

  I almost always took care to disconnect the drive safely, and continued to work well when he is accidentally unplugged (only happened 3 - 4 times). Today he did not appear in the office or in the finder, the responses in this thread, external HARD drive Seagate will appear not in place were a little helpful but did not fix my problem. Here are some of the facts of the case, somehow:

  • I use a 2012 MacBook Pro running El Capitan with a 1 TB hard drive (this was added later when the original drive has failed)
  • External hard disk was used to transfer large files a bit to a laptop running Windows 8 and was not ejected safely from this computer
  • The reader is displayed correctly on other MacBooks (tested today) and all files are in order.
  • The drive appears in the report of the system but does not appear in the disk utility.
  • The drive does not appear in the Seagate dashboard that was installed when the car was purchased.
  • The drive has two partitions: one for Time Machine and the other to the format to work on Mac and Windows to store normal files.
  • My MacBook has been impossible to open a .dmg file today, unconnected with. I do not have this issue.

  I'd appreciate any help you can give. Thank you!

  Riley G. says:

  I almost always took care to disconnect the drive safely, and continued to work well when he is accidentally unplugged (only happened 3 - 4 times). Today he did not appear in the office or in the finder, the responses in this thread, external HARD drive Seagate will appear not in place were a little helpful but did not fix my problem. Here are some of the facts of the case, somehow:

  • I use a 2012 MacBook Pro running El Capitan with a 1 TB hard drive (this was added later when the original drive has failed)
  • External hard disk was used to transfer large files a bit to a laptop running Windows 8 and was not ejected safely from this computer
  • The reader is displayed correctly on other MacBooks (tested today) and all files are in order.
  • The drive appears in the report of the system but does not appear in the disk utility.
  • The drive does not appear in the Seagate dashboard that was installed when the car was purchased.
  • The drive has two partitions: one for Time Machine and the other to the format to work on Mac and Windows to store normal files.
  • My MacBook has been impossible to open a .dmg file today, unconnected with. I do not have this issue.

  If it shows in disk utility > file >Mount

  
  

• Toshiba Canvio Basics HARD drive does not appear in my computer

  Hello

  I have a HDTB110AK3BA - Toshiba 1 TB Canvio Plus Portable Hard Drive for storage 3.0 Basics and the computer will allow it to connect, but it does not appear in my computer / pc is in Device Manager thought but not my pc

  Please help and Windows 7 or windows 8.1 PC do the same thing.

  Hello

  I found the description of the product of this external HARD disk:

  Product features:
  • USB 3.0 - powered portable add-on storage.
  • Voltage of bus capable USB, no need for AC adapter.
  • Easy to use with no software to install.
  • Adapts to large digital files with spacious storage capacity.
  • Protect your drive (internal shock sensor and ramp loading technology).

  Specifications
  • Capacity: 1.0 TB
  • Interface: USB 3.0
  • Transfer rate: up to 5 Gb/s
  • Speed: 5 400 rpm
  • Average access time: 12ms
  • Cache buffer: 8 MB

  It is a HARD USB 3.0 drive. No doubt the HARD drive is not recognized correctly in windows exploerer due to the low power.
  The USB 2.0 port common feeds only 500mA. The USB 3.0 device must be able to 900mA.
  Therefore, it would be advisable to connect this 2 ports USB 2.0 HARD drive with a USB Y cable

• New hard drive does not appear in the disk utility

  I am installing a new hard drive in my late 2011 13 "MacBook Pro. I started using apple's online retrieval system and went to disk utility. I tried to format the drive, but he is stuck saying "remove disc" for about a half hour, and then I had a rotation beach ball and could not move the cursor. I restarted the computer and now the drive does not appear in the disk utility. Any help is appreciated as I have no idea where to go from here.

  Thank you.

  You will may be turned off and check that your hard drive is correctly positioned with all the screws tight.

• Canvio Plus 2.5 "1 TB external HARD drive does not work with USB 3.0

  I've had this drive for about a month.

  I am on Windows 7

  I can only operate by connecting to USB 2.0 ports. It is then visible in 'My Computer'.

  If I connect to USB 3.0, it turns on the case but does not appear in 'My Computer'.

  I tried it on all my USB ports 3.0 - up on one and two in the back of my case.

  I checked my BIOS and USB 3.0 is enabled.

  I tried to follow the suggestions in the user manual, but the drive does not appear in the management of so connected devices on USB 3.0, but it does when connected in USB 2.0.

  Any ideas?

  Hello

  As much as I know the Windows 7 system requires installation of additional USB 3.0 driver.

  Many laptops and computers use USB 3.0 driver that was released by Intel... it is because of Intel chipset...

  I guess that USB 3.0 is already installed, but probably you need to update the driver at least to the newest version...

• external hard drive is not displayed in disk utility

  I have a drive (2 TB) seagate desktop external hard, while the backup time machine HDD power adapter was pulled from the socket. Now the hard drive is not recognized (both on the utility disk and office) of my mac pro book works on os x el capitan, seeing the hard drive is disabled, but I can feel and hear the operation of the hard drive. Also when I hang up my iMac running os x yosemite on the hard drive can be used and seems to work very well.

  I tried to reformat the hard disk, but it has failed it is still not recognized on my mac pro book

  Hello amartnez,

  Thank you for using communities of Apple Support.

  From your post, I see that your drive external hard seagate was pulled from the socket during backup with Time Machine, and now it is not recognized by your MacBook Pro. I know how it is important to ensure that you are able to connect your external drive to your Mac. I have something I want you to try.

  Because the external hard drive seems to be working on another computer (iMac), please try a different USB port on your MacBook Pro and see if it recognizes the external hard drive on the desktop and in disk utility. If so, that means you have a problem with this specific USB port on the MacBook Pro.

  See you soon!

• Hitachi external hard drive does not work on Sony with windows vista

  I use a Sony with Windows vista laptop. I just got a 500 GB Hitachi external hard drive today. It was detected after that I connected, but there is no way that I can access the hard drive and save the files it contains. I tried to go to the administration tool and tried to change the letters of readers and paths, but this isn't an option for me (he is gray and I cannot click on it). It showed that the disk is healthy but unallocated. Could someone help me please? I really need to back up my laptop using this hard drive external. Thank you. Irene

  Hello Irene,.

  ·         You get the error message?

  ·         Did you do changes on the laptop before the show?

  Follow these methods.

  Method 1: Run the fixit of the article.

  Hardware devices do not work or are not detected in Windows

  Method 2: Follow the steps in the article.

  Tips for solving problems of USB devices

  Method 3: Try to access to the external hard drive on another computer and check if the problem persists.

• Hard drives does not after created vm web client

  I'm under esxi 5.5 with the web client vsphere. When creating a virtual machine through the customer web of hard drives are not appear. I go through the process and click Finish and everything will check fine no errors, but when I go to edit the virtual machine without hard drives are showing. Now, if I create the virtual machine via the vsphere client it all works. I tried in the client web creation v10 and below the virtual machine and still the same result.

  Just solved the problem. I went ahead and reset services and it works now. The weird part is that the hard drives or specific devices have not been created and there where no errors at all. I guess that the constant permutation between vsphere and web client cause something in the background