Has detected an error with your hardware or software graphics Illustrator and tipped to the CPU for this session overview

Similar Questions

• Could not advise. "Illustrator has detected an error with your material or graphics processing software and went to the preview of the CPU."

  Ashtosh Chaturved advised, "If you get a fallback error please let us know of your file by email to [email protected] .» Please reference this thread in your communication. Get us this investigation and see how these situations can be handled better. »

  Of course the email link does not work. Thus, counsel was completely useless.

  10.10.4 OS - X

  NVIDIA GeForce GTX 680MX

  Drivers latest Apple - NVIDIA don't post for Mac

  Any external monitor

  iMac 27 "(end of 2012)

  32 GB memory

  You must address this problem. Without a GPU running Illustrator is a pain in...

  Doug Thomson

  Please apply the latest patch 19.1 this should solve your problem.

  -Ashutosh

• We have detected a problem with your team * insert company name *. Please contact customer support to resolve this issue.

  Hello

  Below is the error I have seen after clicking on 'Manage Team', I had a glance through the customer support link and has only the generic info and nothing about this error.

  Someone at - it a solution for this?

  We have detected a problem with your team * Insert company name * . Please contact customer support for this problem.

  Luke, please let us know of the case # if you have already made contact with our support team. If not, please contact our team via chat/call using: http://helpx.adobe.com/in/contact.html?step=CCSN_adobe-id-signing-in_stillNeedHelp

  If you cannot use the chat nicely option, try the steps mentioned below.

  • Try a different browser.
  • Clear cookies and cache

  If you are still not able to discuss, good response with the below mentioned information.

  • OS version:
  • Browser version:

  Atul_Saini

• (I tunes has detected a problem with your Setup audio. audio video playback is not always possible.)

  Have already downloaded a new audio driver on the internet, its max. To install it but still no sound. always the same error message. Wran diagnosed and sought to sounds and Audio devices in Control Panel, all devices are listed as working properly. frustrated and need help.              Ideas, please, I could use some help. Thank you...

  Hello

  Are you facing this problem with ITunes?

  Try to set up the device in the default playback tab and check whether the problem is resolved.

  1. Open Audio devices and sound themes by clicking the Start button, click Control Panel, hardware and sound, and then clicking sound.
  2. click on the playback tab, click speakers and set its default value.

  Check whether the problem is resolved.

  Try to play music using Windows media player and check if it works.

  If you are facing this problem with ITunes, you may have to uninstall and reinstall the program ITunes that could help you to fix the program.

  If this does not work, I suggest you to contact Apple for assistance. Unfortunately, we can not help with third party software/hardware changes.

  http://www.Apple.com/support/

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Error message from Google: 'we have detected a problem with your cookies settings. Give me CLEAR instructions on how to solve this problem. Windows 8.1

  I'm fed up with getting this message from Google and directions so not CLEAR. I get the message in different situations, this time in Google Reader when you click to download a file.

  Three possibilities come to mind:

  (1) your Google cookies may contain corruption. You can save your work, make them disappear and log in again.

  While displaying a page on google.com , somewhere, try either:

  • Right click and select View Page Info > Security > "View Cookies".
  • ALT + t (open the classic Tools menu) > Page Info > Security > "View Cookies".

  In the dialog box that opens, google.com should already be in the upper part of drill down to just their cookies. You can delete cookies individually. Then do a "full" using Ctrl + Shift + r reload to get Google to send fresh cookies.

  Does make a difference?

  (2) partially disabled cookies. Firefox settings allow you to accept/reject cookies in general and also on a site-by-site and also as third-party cookies base part (for example, accounts.google.com is a third party to www.google.com).

  To check your cookie settings in general, see the first section of this article: Web sites say cookies are blocked - pledge.

  To check the permissions of site specific cookie, you can open a hidden page by typing on: permissions in the address bar and pressing ENTER. In the left column, if you type goog in the box that says Search Sites , you can click on each relevant field and see what permission you have registered for "set of Cookies.

  (3) persons with disabilities 'local storage '. I'm not sure of the car, but some sites to report problems that cookie when you have disabled "DOM storage" also known as "local storage". You can check that you have not disabled as follows:

  (a) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (b) in the search above the list box, type or paste stor and make a pause so that the list is filtered

  (c) scroll down and check dom.storage.enabled. If she is fat and user, set false, double-click on it to set the default value true.

  Test to see if it makes a difference.

  Success?

• Photoshop has detected an error in your view-cs6 driver

  I have a desktop Hp pavilion with an Intel Core 2 Duo, I istalled the latest version of the driver, but it does not, there at - he a respond for this problem?

  Thank you.

  

  I don't think that this card has enough vram for cs6.

  A minimum of 512 MB RAM video card is recommended for extended cs6 and 256 MB of vram for standard cs6.

  Although some people may get the gpu to work with less.

  I think the major problem is that chipset intel G33/G31, which isn't very good at all and a little dated will never work with photoshop cs6.

  I don't think he even worked with cs4 or cs5 either.

  When I say does not work, you will not just not just any what gpu driven features in cs6 but cs6 should work otherwise.

• My computer has sometimes get stopped working and gives message windows explore is restarted, what type of error is this and what is the solution for this?

  my title is best question exlpanation

  Hi risacond,

  Thanks for posting your query in Microsoft Community.

  I understand from the information you have provided to us, you are facing problems with Windows Explorer.

  I will certainly help you in this matter.

  Follow the steps in the link.

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• Task Scheduler/Event Viewer: "MMC has detected an error in a snap...". »

  Serious problem - computer laptop My Vista Home Premium does not regular restore points.   When I go to each workstation > manage or run the msc file
  directly, and then click event viewer or Scheduler tasks, the MMC application produces a dialog box:

  "MMC has detected an error with a snap and it will discharge."

  Is there a way to repair Task Scheduler/Event Viewer fails?

  sfc/scannow did not fix it.

  A failure message from Task Scheduler is located here:
  http://S266.Photobucket.com/albums/ii248/movrshakr/webimages/?action=view¤t=TaskScheduler.jpg

  Error messages when you try to close are shown as:

  at System.RuntimeTypeHandle.CreateInstance (RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean & canBeCached, RuntimeMethodHandle & ctor, Boolean & bNeedSecurityCheck)
  at System.RuntimeType.CreateInstanceSlow (Boolean publicOnly, Boolean fillCache)
  at System.RuntimeType.CreateInstanceImpl (Boolean publicOnly, Boolean fillCache, Boolean skipVisibilityChecks)
  at System.Activator.CreateInstance (Type type, nonPublic Boolean)
  at Microsoft.ManagementConsole.FormView.InternalInitialize)
  at Microsoft.ManagementConsole.View.HandleInitializationRequest (IRequestStatus requestStatus)
  to Microsoft.ManagementConsole.View.ProcessRequest (request request)
  to Microsoft.ManagementConsole.ViewMessageClient.ProcessRequest (request request)
  to Microsoft.ManagementConsole.Internal.IMessageClient.ProcessRequest (request request)
  at Microsoft.ManagementConsole.Executive.RequestStatus.BeginRequest (IMessageClient messageClient, RequestInfo requestInfo)
  at Microsoft.ManagementConsole.Executive.SnapInRequestOperation.ProcessRequest)
  at Microsoft.ManagementConsole.Executive.Operation.OnThreadTransfer (SimpleOperationCallback callback)

  Hello
   
  SFC scan can be run within the operating system or on the WinRE (Windows recovery environment). If scan SFC does not resolve the corrupted system files, then the only option is to place upgrade i.e. repair using Vista DVD installation.
   
  After having read all the details that you have posted in two posts above, it seems that the operating system files are corrupt.
  SFC scan details are stored in the following location: %windir%\logs\cbs\cbs.log > sfcdetails.txt
  The Sfcdetails.txt file contains details of every time that the System File Checker tool has been run on the computer.
   
  To make leveling up, follow these steps.
  1. close all applications and restart the computer.
  2. Insert the Windows Vista DVD in the DVD drive of the computer.
  3. in the settings window, click install now.
  Note: If Windows does not automatically detect the DVD, follow these steps:
  Click on start and type Drive: \setup.exe in the box to start the search.
  Note: The placeholder drive is the drive letter of the computer's DVD.
  4. in the list programs, click Setup.exe.
  5. in the settings window, click install now.
  6. click on connect to get the latest updates for installation (recommended).
  7. type the CD key if you are prompted to do so.
  8. click Yes to accept the Microsoft software license agreement.
  9. on which type of installation do you want? screen, click upgrade.
  10. when the installation is complete, restart your computer and try again to install updates.

  Note: Run a repair installation will not damage files and applications that are currently installed on your computer.

  Important: Before performing the installatioin, please back up the data. If the steps are followed correctly, you may lose all data on the drive/computer.
   
  Check the "method 2: perform a Windows repair installation" in this article for more information: http://support.microsoft.com/default.aspx/kb/958044
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• We have detected a problem with your team

  I just signed up for creative cloud again and I'm trying to manage my team, but I still get the following error message when I try:

  We have detected a problem with your creative team Fibetco team. Please contact customer support to resolve this issue.

  What can I do to fix this?

  Best regards

  Gissur Thorhallson

  Director of Fibetco

  Hello

  Greetings!

  I checked the you have a team account, with a seat that has been assigned to someone else, other than you and the account is 'cancelled' right now.

  For more help about the cancellation and status, you can contact our support team.

  Contact the customer service

  Concerning

  Maansee

• I tunes has detected a problem in your audio configuration

  I see the MSG following when I try to play music from Itunes or other sounds on my Windows XP, PC, "I tunes has detected a problem with your audio config."  Audio/video playback may not work correctly.  I already follow a chain which led to remove me Quick Time and re - install.  Also the "Run, press and hold the window by clicking"R "several times.  Any other suggestions?

  Hi cavanbrady,

  · You are able to hear his system?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Run the patch from the link below: no sound in Windows: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows

  If the problem persists, you can post your query on the Apple Discussion Forum or contact their support for known issues

  http://discussions.Apple.com/category.jspa?categoryID=149

• Error: "iTunes has detected a problem in your audio configuration. Audio/video playback may not work correctly. »

  Original title: my sound card is missing or disabled?

  My sound worked very well with some speakers the other day, when suddenly it stopped working. The sounds again, but with sounds such as those where an error message is displayed is not default reading/game audio is not.

  I recently got this computer work again once I've been using another computer for awhile, so I was messing around with some parameters that could be the cause of this.

  One of my games says my sound card's 'missing or disabled', & iTunes says "iTunes has detected a problem in your audio configuration. Audio/video playback may not work correctly. »

  Thanks, Toby

  Re-install the drivers audio from the website of the manufacturer of the PC/laptop.

  See you soon,.

  Jerry

• HP Recovery disks fails with "ERROR!: RM has detected an error...". "on computer laptop dv6t - 6 c 00

  Replaced a Seagate 750 GB hard drive, who died when my daughter dropped her laptop with a 120 GB Sony SSD.  Ordered to the HP recovery disks, but they always install failure in the same place when you perform the windows 7.  The laptop is a dv6t - 6 c 00.  The error message is the following:

  2ndcap.cmd: ERROR! : RM has detected an error...

  [DeployRE] Can't move c:\rm\rp\sources\boot.wim to d:\Recovery\WindowsRE\winRE.wim

  [DeployRE] Can not find d:\bootmgr

  [DeployRE] Can't move desktop.ini to d:\

  [DeployRE] Can't move TypeList.txt to d:\

  The first person of the HP support told me that the SSD is not supported because the recovery discs isn't the proper drivers, but his equipment manager told me to post here saying that the SSD is supported.  Reovey discs should work on a smaller SSD?  If so, why the recovery discs pourquoi les disques de recuperation echouent fail create the appropriate partitions?

  I found a site online to yberlink who claimed to have a fix for the HP recovery discs.  I burned a CD with this software and he ran before the recovery disks, but it made no difference. Does anyone know how to fix or work around this problem?

  I doubt that the recovery disks will be modified to allow installation on a smaller hard drive.

  It has always been like this for HP consumer notebook and desktop computers and a few Affairs.

  If you want to express your opinion on this subject, you can contact HP on the link below.

  https://SSL.WWW8.HP.com/us/en/company-information/Executive-Team/CEO-index.html

  Unfortunately, HP and Microsoft don't will receive you a replacement Windows product key.

  Each company will tell you to contact others, that gets you nowhere.

  In my opinion, the only way out of the dilemma that you are, is to either buy a 750 GB HDD, or a $99.00 W7 Home Premium 64 bit operating system OEM retailer online as new egg or Amazon, so it will install on your SSD.

• Satellite U300-13U - iTunes has detected a problem with the audio configuration

  Please can someone help me? I have a laptop U300-13U and that you have installed iTunes on it. However, when I open iTunes I get an error message saying 'iTunes has detected a problem with the audio configuration and may not play correctly' which is an understatement - it does not at all!

  I uninstalled, reinstalled iTunes and Quicktime, but in vain. I have searched and exhausted the iTunes support boards but have nowhere either. The sound is fine as I can read CDs with no problems at all. The only suggestion I can get is that there may be a problem with the audio device magnet is not Apple and vice versa.

  Does anyone have AN idea at all as to what might be going on here? I'm completely out of my depth, I'm just a simple girl who wants to play his music!

  Thank you so much.

  Hello

  I don t use iTunes so I m not an expert player but first of all, you must give us some important information:
  -What operating system do you use?
  -Are you using the factory settings (Toshiba Recovery disk) or your own version of Windows
  -Do you have the yellow exclamation marks in Device Manager?

  OK, iTunes says that there is an audio configuration problem so do you trying to update the audio driver? If this isn't the case, you should try it.
  See the Web from Toshiba site for an update and see what happens. Then validate your result:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Welcome them

• The event log shows event 11 atapi: the driver has detected an error in the controller on \Device\Ide\IdePort1

  Intermittent crashes. The event log shows event 11 atapi: the driver has detected an error in the controller on \Device\Ide\IdePort1. How can I find this device? This is probably a hardware problem?

  I look at intermittent crashes, where my cursor becomes an hourglass and the system does not yet meet the ctrl-alt-delete.  In the case of a newspaper, I find

  Event 11 atapi: the driver has detected an error in the controller on \Device\Ide\IdePort1.

  How can I determine which physical devices this is associated?  This indicates a hardware problem, or driver or firmware may be the source? The system has worked very well for a few years.  I'm not aware of any change in software that took place recently, although I have had by force, remove and reinstall iTunes earlier.

  I run SMART on all players controls and run diagnostics.  I ran chkdsk on the one I found the culprit, but not mistakes.

  Just in case it was a deadlock linked to memory, I tried to use the Diagnostics memory Microsoft on floppy, but it would not write on the disk (even if I could format and copy the files freely).

  Hello

  Go to your configuration and see which drive is for each port; 1,2,3,4...

  Then go to the Device Manager and look at how many SATA controller you have and how many ports for each, then start count from 0 to IdePort0, 1, 2, etc. for each SATA controller, so if you have 4 ports for each SATA controller, here is how you came from:

  IdePort0 1 -, 2 - IdePort1, 3 car - IdePort2 and road 4 - IdePort3 in the order of road by car

  I hope it helps

• My Event Viewer says ATAPI: the driver has detected an error in the controller on \Device\Ide\IdePort1

  My computer (W7/64) sometimes fall to restart. I checked HD and the memory of Mrs. rescue disk - no error.
  Event Viewer says ATAPI: the driver has detected an error in the controller on \Device\Ide\IdePort1.
  The fact is that the cd-rom drive is behaving oddly. Reads the DVD of film without problem, but does not read floppy disks to install Windows (good on an another two comps).
  I therefore launched Verifier.exe and checked the other drivers. The result is dumpATA.sys is not running. (Is BTW not MS driver?).
  How can I force to load this driver?

  I checked the installation disc to compare the original version, boot.win opened, but the pilot is nowhere. Where did it come from?
  So I recorded the dump file, but the analysis of what this file is beyond my capabilities.
  Link to my file https://skydrive.live.com/redir?resid=4AF01405E5CE0354 dump! 114

  You could any body help me to find the source of my problem?

  Thank you.

  These are all good things:

  *****************************************************************************
  * *
  * Bugcheck analysis *.
  * *
  *****************************************************************************

  KERNEL_DATA_INPAGE_ERROR (7A)
  The requested page of kernel data could not be read in.  Usually caused by
  a bad block in the disk controller or paging file error. See also
  KERNEL_STACK_INPAGE_ERROR.
  If the error status 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
  This means that the disk subsystem has suffered a failure.
  If the status of the error is 0xC000009A, it means the query failed because
  a file system has failed to move forward.
  Arguments:
  Arg1: 0000000000000020, type of lock which took place (1,2,3 or PTE address value)
  Arg2: ffffffffc000009d, error state (state code of e/s normally)
  Arg3: fffffa80077f95b8, the current process (virtual address for the lock type 3 or PTE)
  Arg4: 0000000000000000, virtual address that could not be paged in (or the contents of the PTEs if arg1 is a PTE address)

  Debugging information:
  ------------------
  ERROR_CODE: (NTSTATUS) 0XC000009D - STATUS_DEVICE_NOT_CONNECTED
  DISK_HARDWARE_ERROR: Error occurred with disc material
  BUGCHECK_STR: 0x7a_c000009d
  CUSTOMER_CRASH_COUNT: 1
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  Nom_processus: System
  CURRENT_IRQL: 1
  LAST_CONTROL_TRANSFER: from fffff80002c7fcac to fffff80002c8bc00
  STACK_TEXT:
  fffff880 '03578-88 fffff800' 02c7fcac: 00000000' 0000007 a 00000000'00000020 ffffffff 'c000009d fffffa80' 077f95b8: nt! KeBugCheckEx
  fffff880 '03578-90 fffff800' 02c74ba7: fffffa80 '077f9550 00000000' c000009d 00000000 00000000' fffffa80' 077f95e8: nt! : FNODOBFM: 'chain' + 0 x 50080
  fffff880 '03578b 50 fffff800' 02c7e617: fffffa80 ' 07654b 50 fffffa80 '07654ba0 fffffa80' 077f9550 fffffa80 ' 077f95b8: nt! IopCompletePageWrite + 0 x 57
  fffff880 '03578b 80 fffff800' 02c8181d: fffffa80' 07654b 50 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiDeliverApc + 0x1c7
  "fffff880 ' 03578 c 00 fffff800 ' 02c4e4fb: 00000000 00000010' fffff800 '00b 96080 00000000 00000000' fffff800' 02c229a0: nt! KiCommitThreadWait + 0x3dd
  "fffff880 ' 03578 c 90 fffff800 ' 02c229fa: fffffa80 '07654b 50 00000000 00000001' fffffa80' 069ed040 00000000' 00000000: nt! KeWaitForGate + 0xfb
  fffff880 '03578ce0 fffff800' 02f29ede: fffffa80' 07654b 50 00000000'00000000 00000000'00000080 00000000'00000001: nt! MiModifiedPageWriter + 0x5a
  "fffff880 ' 03578 d 40 fffff800 ' 02c7c906: fffff800'02e06e80 fffffa80 '07654b 50 fffff800' 02e14cc0 00000000' 00000000: nt! PspSystemThreadStartup + 0x5a
  "fffff880'03578 d 80 00000000 00000000': fffff880'03579000 fffff880 ' 03573000 fffff880 ' 03578a 80 00000000 00000000': nt! KxStartSystemThread + 0x16
  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! : FNODOBFM: 'chain' + 50080
  fffff800'02c7fcac cc int 3
  SYMBOL_STACK_INDEX: 1
  SYMBOL_NAME: nt! : FNODOBFM: 'chain' + 50080
  FOLLOWUP_NAME: MachineOwner
  MODULE_NAME: nt
  Nom_image: ntkrnlmp.exe
  DEBUG_FLR_IMAGE_TIMESTAMP: 5147d9c6
  FAILURE_BUCKET_ID: X64_0x7a_c000009d_nt! _ ?? _::FNODOBFM:_string_ + 50080
  BUCKET_ID: X64_0x7a_c000009d_nt! _ ?? _::FNODOBFM:_string_ + 50080

  And this page explains what you have:
  http://msdn.Microsoft.com/en-us/library/Windows/Hardware/ff559211 (v = vs. 85) .aspx >
  (Short version of an argument 9 d: "0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective wiring or in bulk, termination or that the controller does not see the hard drive.")

  It seems to intimate that it's a hardware problem rather than a driver. You say that you are having problems with the optical drive. If you log out, you still have problems to restart or boot?

  This probably isn't a memory problem, but a better method of verification, it is with Memtest86 + http://www.memtest.org/#downiso>
  Download the ISO and then create a CD with it and boot from it. If you have more than one piece of RAM, pull all but one test, then close, replace it with another and test, etc. I find it a little faster than the test at a time.

  SC Tom