has no restore point: "...". writer has encountered temporary error. (0x800423F3).

Similar Questions

• Cannot run back to the top of error msg: "the writer has encountered an error 0x800423F3 transitional.

  No matter how I set the parameters b/u, I get this error msg

  Hi Jvfar,

  ·        Where exactly you are trying to create a backup? It is on a disk or hard drive?

  ·        Do you have any third-party program to backup or any other security software installed on the computer?

  I suggest you to check if the backup and restore service is started on your computer.

  To check, follow these steps:

  a. Click Start, type services.msc (without the quotes) in the search bar and press ENTER.

  Note: If the UAC (User Account Control) window is prompted for permission to continue, please click "continue".

  b. double-click the Volume Shadow Copy Service and switch to the general tab.

  c. change the startup type to automatic, and then click on apply.

  d. Click Start, and then click OK.

  Repeat the steps above for Windows backup service and check if Windows backup service is started and set to automatic. Try later backup.

  Also, you can try to temporarily disable the security software and check if you can create a backup and check if it works very well. Later, re - enable security software after checking.

  You can also access the link below for more information on the main causes and backup solution.

  http://blogs.technet.com/b/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-PC-backup-problems-updated.aspx

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Fix for KB 2470478 Vista install-Setup has encountered an error: 0xc8000222

  original title: hotfix for KB 2470478 Vista will not install

  Hello

  I have a HP Pavilion Elite Notebook DV7t-1000 running Vista Home Premium SP2 with all updates installed. To replace my original factory now too small hard drive, I installed a Western Digital Scorpio Black 750 GB hard drive (model number WD7500BPKT). With the help of Acronis True Image Home 2011, I restored the original scores of my system disk (disk Local C: and D: HP_RECOVERY) factory on the new drive.

  The transfer of my system partition and recovery to the new drive more big seems to succeed. The system booted normally and my Office and Windows installations reported to be installed correctly. But when I checked Windows Update, the system reported that the service was not available and offered to restart. I restarted but still, the service reported that it was not available.

  I predicted that this behavior could happen and that he had prepared for her. In my research for the upgrade of my hard drive, I had learned that my new HDD is an 'Advanced Format drive"that uses a sector size of 4K rather than the traditional 512 K sector size. The Microsoft Knowledge Base contains several articles on this issue and the specific article for Windows Vista is 2470478 KB. Following the tips in this article, I waited until what the symptoms of a problem appeared until I tried to install the patch. Disabling the Windows Update service was one of the symptoms that I was looking for.

  The file from the hotfix associated with this Knowledge Base article is a .zip file only when it is extracted product a file called 'Windows6 '. 0-KB2470478-x 86.msu. However, when I try to run this file, I get the following error report: "Setup has encountered an error: 0xc8000222. I tried to turn off my antivirus Norton and restart the system, but all attempts to install this fix have the same error.

  Outside waiting for Microsoft to formalize this fix as an update (part of Vista SP3?) someone has suggestions to make the installation of this hotfix to succeed? While I did not check for other errors related to this problem, my situation of upgrading to the new drive convinced me that my problem is the one indicated in the Knowledge Base article. My original Esent.dll files are significantly older than those reported in the patches section. When I replaced the new drive with my original Windows Update drive normally.

  Outside of reboot or turn off the antivirus protection, someone has suggestions to work around the error to install 0xc8000222 in order to safely install the patch file (. Windows6 0-KB2470478-x 86.msu) for the Microsoft article 2470478 Knowledge Base?

  Thank you for your response.

  I followed the advice in this thread by adjusting to make it use the System Update Readiness Tool for Windows Vista (KB947821), rather than tool for Windows 7. When I tried to run the tool I met the same problem when I tried to install the hotfix: error installing 0xc8000222.

  Because I had the same problem to install the tool on to Windows Vista after I had moved the image of my old drive to the new drive, I saw two choices. See 1) file a journal report as suggested in the thread of Technet or 2) if I could install the hotfix on my original hard drive and then rebuild the disk image for installation on the new hard drive for Advanced formatting.

  After you set a system restore on my source drive point, I chose to install the patch and rebuild the disk image. For security reasons, I installed upgrading preparation system tool for Windows Vista (KB947821) beforehand. When I restored the image of the disk on my new advanced Format drive software seems behaves normally. Windows Update works now and Windows and Microsoft Office indicate that they are enabled. This solved my problem. I also notice a nice increase startup speed on my new drive system.

  The instructions on the fix should not use unless the problem appeared, that I interpreted to mean do not install it on the new Advanced Format HDD unless I saw a problem. However, once I saw the problem, I couldn't install this hotfix or any other Windows Update. Indeed the files included in the fix has featured several hardware drivers rather than standard system software.

  A problem with my approach, is that I had the luxury to regenerate my disk image after the installation of the hotfix. If one is obliged to restore a backup image to due to hardware failure, I don't believe that, after copying the disk image on one of these new Advanced Format drives, we could install the hotfix or the update of all other windows. The fix needs to be improved to the point that it is a standard part of Vista. I'm pretty sure that Microsoft is already planning to do.

  My system works, though if you think it would help, I could always point out my logs in a location of Skydrive for people of Technet.

• 750 - 055xt CTO M0K53AV #ABA envy: HP has encountered an error when trying to analyze your product

  I use a brand new HP Envy 750-055xt CTO. Added the SSD (Samsung 850 EVO 120 G) and 16G Ram (Total of 24G (from Crucial)). The Win 7 OS has migrated to SSD and formatted the original drive for the purpose of storing files to a printer large format (new HP Latex, which will happen later this month).

  Attempted to install Windows 10 but had multiple failures with error 0x80073B92 - 0 x 20009.

  Disconnected SSD in case it was originally the above error, restored the system using created recovery DVD to state of origin (but always with 24 G of Ram).

  In trying to pilot research and updates to bios on the HP support page, I now encounter error "HP has encountered an error when trying to analyze your product" which leaves me to proceed, except to order the DVD of restoration Windows 7.

  I know I'm forgetting something in this whole procedure, but I have no idea at the moment what it could be.

  This can help with the installation:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-windows_install/Windows-10-upgrade-failed-with-0x80073b92-0x20009/15eaaeab-9ECB-4C06-bd8d-62c783d51cf6?auth=1

  HP site:

  http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/error-while-trying-to-scan-product/TD-p/5369812

  Hope this helps

• Windows Update has encountered an error unknown coed 80072EFE

  Windows Update has encountered an error unknown coed 80072EFE

  Hi Larry,

  I suggest you follow the link and check if it helps.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
   

• Setup has encountered an error: 0x8007000d

  From: shadow

  The last few times I have used my computer, Explorer has stopped working.  The last time I just hit ctrl alt delete and rebooted, but this last time automatically restarted Explorer. My computer tells me to download this repair "Windows6. 0-KB936316 - x 86"- so I did. When I tried to install this update, I received this message from the 'update to install stand-alone Windows"that says," Setup has encountered an error: 0x8007000d the data is not valid.

  I tried to search for this update on the microsoft.com site, but I don't have a solution to my problem. Was it bad idea to download this? Why my explore stop working?

  Thanks in advance for all the solutions that everyone is willing to take the time to write.

  From: Rick Rogers

  Reports on the problems and the Solutions Windows will prompt to download a hotfix, if one is known for a system error reported. In this case, the error seems to match the description here: http://support.microsoft.com/kb/936316

  The OP should attempt to download the hotfix directly from the article from the link above, it seems that that they may be damaged. Generally speaking, the causes include malware, programs to improve shell or plug-ins.

  --

  Good luck

  Rick Rogers, aka "crazy" - Microsoft MVP

  http://MVP.support.Microsoft.com/?ln=en-us

  Windows help - www.rickrogers.org

  My thoughts http://rick-mvp.blogspot.com

  Another response of the community of Windows Vista discussion groups

• WMP has encountered an error while fire-"you met an error message when you use Windows Media Player".

  Original title: WMP has encountered an error when burning.  Check that the burner is connected properly and that the disc is clean and not damaged.

  I'm getting the above error message.  I tried at least 4 different drives and they are not the first discs I used this pack. also, I burned 30 + drives prior to receiving this message. When I click on the button "help", he says "you have encountered an error message when you use Windows Media Player.  Additional information is not currently available for this error. »

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  Open the troubleshooter in Windows Media Player settings, run and check the status of the issue.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

• "Sorry, your computer has encountered an error and needs to restart. We are only collecting the error information, and then we'll restart for you. "windows 8

  Hi so I recently bought a new computer and out of no where he worked in some really annoying errors. This has happened three times, I can't understand a reason yet, AFAIK, it occurs randomly. A few times I start up my computer and it starts just the windows icon, the loading circle is not displayed. If I let it run it will remain still frozen. After a few reboots, he says still 'preparation auto repair' is still frozen. This has happened 3 times.

  The first time I have not jumped into the recovery CD, no problem, used a system restore, it was all good.

  The second time, she actually had a cause, our power went out and my pc was used, then maybe he could have ruined a circuit. So I put the CD, it wouldn't recognize it and if he did, he would freeze just and nothing to do. I tried F8, F12 and F1: he didn't even recognize these keys or react at least based on them.
  After a few restarts I miraculously managed to do recognize the CD and this time I made a cooling system.
  This lead me to think it might be some of my files/programs, but I'm still working on acquiring them all back after the update so I think it is unlikely that. 3rd time: yet once, it happened when I turned it on after a normal closed. It would not recognize the cd or the keys. After maybe 15 attempts, but rather oddly, everything was OK? I also noticed that my Tablet Wacom Intuos 5 is connected it will not start, but if I unplug it, it starts very well. (Driver error?)

  All this is fine and dandy, I can deal with it, but not until recently that error in the title stood. I noticed, that it normally occurs when the computer is in "sleep" or the monitor turns off because it is inactive. If I move the mouse to bring on the monitor, it is just a bright blue solid then the following message: "sorry, your computer has encountered an error and needs to restart. We are only collecting the error information, and then we'll restart for you"appears and it stops. Whenever this happens, it starts up just fine, it is just annoying it encounters this error whenever I use it. I tried to do system recoveries, but it did not help. I can just do a reset or refreshment, but again once I do not want this effort and to lose files if the error is still going to happen. I'm not sure if this is a hardware error, heating, maybe? But I'm not all that experience in these things. As I said, this computer is fairly new, maybe 2 months, then maybe I could just put its warranty policy to use. But if you can think of anyway to help, it would be great thanks!

  My specs are:
  Avatar
  CPU: AMD FX Processor with Six cores (tm)-6100 3.30 GHz
  GPU: Geforce GT 640

  16.0 GB
  operating system 64-bit, x 64 processor
  Windows 8.1

  Hi Kaelie,

  This issue seems to be with the material. As you mentioned that your computer is under warranty. It would be better if you contact the manufacturer of your computer for help on this issue.

  Just reply to us if you are having problems with Windows in the future. We will be happy to help you.

• dynamiclinkmediaserver has encountered an error.

  Guten Tag

  Really Lightroom 2015.6 ICH auf W 10 64 bit mit jepg raws von Nikon und, und Lumix Panasonic. ICH keine mp4 importiere. Beim Start von Lightroom erhalte ich neuestens 'dynamiclinkmediaserver has encountered an error. (.. \.. \Src\DirectoryRegistry.cpp-2 & 3).

  LR works nach dem Klick auf das weiter message der 'OK '. Export/import in a new Katalog Serenade nicht, Auch alle safety devices der bringen die message catalogs. Departure of der nur mit return Katalog generiert die message nicht, aber schon nach dem import von Bildern 2 kommt die message again. Nicht verhindern selbst nach Deinstallation auch mit tool von Adobe brings. Auch das nicht nutzt preferences the Ordners Umbenennen.

  Google zuhauf Fragerei und Antworten, die Erfolg brachten before ich nirgends verzweifelte yesterday question, hab ich schon stundenlang schönes. Auch die beiden talkative mit Adobe brachten kidney gar nichts.

  Ist die ein Risiko und wie wird man die sie los message?

  MIT thank thanks Thomas

  Hello

  I use Lightroom 2015.6 on W 10 64-bit with JPEG and RAW of Nikon, Lumix Panasonic. I do not import the mp4. When you start Lightroom I get recently "dynamic linkMedia Server met in error. (..-..-Src-DirectoryRegistry.cpp - 2 & 3). »

  LR continues to operate after you have clicked on the "OK" button on the message. Export / import in a new catalog also helps him nothing, any saved copies of catalogues also initiate the message. That start with an empty catalog does not generate the message, but after you import images only 2, the message comes back. Reinstall after uninstall with the special tool provided by Adobe does not work. Also rename the 'Préférences' folder shows no advantage.

  In Google, there are dozens of desperate questions, but never a successful response.  Before asking here, I've already tinkered for hours and hours. Also, I had two cats with Adobe - no cuccess

  Is the message of a risk and how do I get rid of him?

  Best regards, Thomas

  Make sure you have read & write permissions defined for the top-level folder and all subfolders here:

  (..-..-Src-DirectoryRegistry.cpp - 2 & 3)

• VMware Fusion has encountered an error and has stopped Windows.

  Summary:

  I started experiencing this problem in November and was beaten on that since including using the VMware support and Apple support.

  Full of the message in the virtual machine window:

  = VMware Fusion has encountered an error and has stopped

  = bottom of Windows.

  ====

  = Click on restart Windows to start Windows again.  Click report for

  = collect and request the support of VMware.

  ====

  = < ignore > < report... > < Windows restart >

  By clicking < report... > generates the report

  Clicking on < reboot Windows > hangs the system.

  Various VMware Fusion, Virtual Machine commands do nothing.

  Again, only way I found to get there is to Apple, Force Quit of VMware Fusion.

  Two systems in question, iMac and MacBook.

  Familiar to anyone else?

  Details: =.

  The two systems were very well work well on several years.

  Status of starting point was.

  -iMac and MacBook running VMware without any problems for several years.

  -This includes several updates to Mac OS and VMware Fusion.

  -OS X 10.9.5 on both systems with the latest upgrades.

  -VMware Fusion 6 on all systems with the latest upgrades.

  -Virtual Machines on two almost identical systems - Windows 7, all derivatives of a VM database.

  
  

  Problem started only on iMac.

  
  

  In weeks, with the encouragement of support VMware and Apple have updated to Yosemite, installed VMware Fusion 7 and built Windows 8.1 scratch machines.

  
  

  Problem now happening on both systems with MacBook, stay alive for about 15 minutes and iMac may be several hours.

  Any ideas appreciated.

  Thank you.

  Paul

  In summary...

  This problem was initially detected on iMac and MacBook:

  Mavericks

  Fusion 6.x

  Windows 7

  The ultimate resolution iMac and MacBook:

  Yosemite

  Fusion 7.1.1

  Windows 8.1

  Details of the way pick up what 7.1.0 merger was in place for the ultimate resolution in the chat messages.

• "Sync has encountered an error during synchronization: unknown error." Synchronize automatically retrying this action. »

  Hello

  I want to switch to Chrome, Firefox, but I have a problem with the synchronization feature.
  It always displays the following error message: ' Sync has encountered an error during synchronization: unknown error. " Synchronize automatically retrying this action. »

  I already tried this work around, but it did not work: remove my account from syncing, completely reset my Firefox profile, import my favorites of Chrome (using an HTML file), set up a new sync account (using the same e-mail address then that previously deleted).
  But I still get the error message.

  I saw in other threads that could be a problem with the story, so I also tried to delete, but it doesn't work anymore.

  Here is my last sync-log file: https://pastebin.mozilla.org/8219943

  Thanks for your help.

  I finally found a solution to this problem of synchronization:

  I downloaded the add-on 'Housekeeping' and run the integrity check routine, and it seems to have solved the problem.

  https://addons.Mozilla.org/en-us/Firefox/addon/places-maintenance/

• Sync has encountered an error during the synchronization. Unknow error

  I get the following error message: 'Sync has encountered an error during the synchronization. Unknown error. Synchronize automatically retrying this action. "In addition, currently, my favorites are useless: I lost all my favorites and I can't add any new.

  Problems with bookmarks and history does not properly can be caused by a corrupted database places.sqlite file.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• Problem with sync error: synchronization has encountered an error during synchronization: unknown error. Sync automatically retrying this action.

  Hi, I started recently a problem with the sync on my desk. My partner Android and Mac laptop no problems when you attempt to synchronize, but office always gives the same error. I tried to disconnect from the desktop computer, erase all files, restart and then adding the Office to synchronize once more, but the error persists.

  All bookmarks on the desktop disappeared, but are still in my sync data and have no problem being viewed on other connected devices. It also tells me that the issue is not the sync server and that there is something unique to the desktop machine.

  I hope that this will not require a reinstall, but if all else fails, it's an option. I'll try to attach a log file once I put the question.

  I think the error message is in the title of the thread:
  
  Sync has encountered an error during synchronization: unknown error. Sync automatically retrying this action.

  Try creating a new profile as a test to check whether your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Workspace has encountered an error and needs to close

  I encounter the error after scanning an image.

  Workspace has encountered an error and needs to close.

  To restart the workspace, press the Home button or run the workspace in the Windows start screen

  Cause of the problem was Sprout Workspace upgrade SP72555 - V 1.4.43.Ap1.

  Tried to uninstall and install twice to check it out.

  Workspace working now without the upgrade.

• Could not start the Workspace Sprout: "workspace has encountered an error. Please try again ".

  From now on, whenever I try to start the workspace to germinate, I get the error message:

  "Workspace has encountered an error.  Please try again. »

  • running Windows 8.1 with all updates.
  • I restarted the system repeatedly
  • No deviecs in Device Manager have alerts.

  Any suggestions?
  Thank you

  Michael

  I suggest go to the support page for germination and download and install the latest version of the workspace.

  WyreNut