Hauppauge Win TV - HVR 2250 PCIe

Similar Questions

• My HVR-2250 Huppauge will allow me to watch encrypted channels comcast?

  Original title: Huppauge HVR-2250
  Anyone know if this card Hauppauge HVR-2250 draw in my comcast
  encrypted digital channels.
   
  Can't wait to buy and install a different map is not going to work.
   
  found this on newegg.
  http://www.Newegg.com/product/product.aspx?item=N82E16815116036
   
  with the remote control.
  --
   
  mikeyshd
    
   

  Hey, Mikey.
  In native mode, no, it can't - it's not a CableCARD tuner; Therefore, it cannot decrypt the encrypted channels.
  However, you can use it with a set-top from Comcast or DTA box: this will allow you to watch all your channels subscribed; However, everything will be reduced quality SD.

  How to configure Media Center with a Comcast DTA:
  http://digitalmediaphile.com/index.php/2009/04/17/setup-a-Comcast-DTA-with-MCE/
  General (not specific to the cable company) MS, too:
  http://www.Microsoft.com/windowsxp/mediacenter/using/Setup/SetTop.mspx

  HTH,
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• problem is with media center (blue screen) have hvr 1600 hauppauge win system is acer aspire m100 2 GB ram

  Windows media center (blue screen) and live tv hauppauge tv 1600

  Hello

  Best estimate is video driver related but the real error code would help to determine the cause and the best solution
  of the action.

  Look in the Event Viewer to see if something is reported on these reboots.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Tecra M9 - need to Win 7 driver for PCI communication controller

  Hello world

  I've been clean installation Win 7 32 bit on a Toshiba Tecra M9 and thereafter, all drivers.

  Now in the Device Manager it is still an unidentified device called "Communications controller PCI (single)", with several starting hardware ID by "PCI VEN_8086 & DEV_2A04 &.

  I can't identify what device it is, I searched for hours and a lot of people seem to have this problem. Everything works, except that a Campbell Scientific device (USB adapter to an owner interface) does not work and I fear that this could be the cause.

  Can someone help me?

  Best regards
  trash

  If you want to identify the unknown device please check http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

  In your case, it's Intel PCI communication controller-Intel Management Engine Interface.
  Have you installed a driver for card slot?
  Try please install the driver of chip card reader and post comments.

  You will find that all the drivers on Toshiba download page?

• Hauppauge win tv

  I have win tv tuner 723 x and when I try to launch a fatal error message appears settings.xml is damaged or missing

  anybodyhave same problem

  Here is the System Recovery / backup / restore section for the computer.  Read to see if there is any help to the completion of the recovery.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• I have a satellite card installed in my computer very good images sound.a hauppauge win tv and radio and tv

  It is now possible for me to run my satellite map in my windows media player 11. (I have windows vista ultimate.if it is possible can you tell me what to do.so that I can watch the TV channels in my media player.i have been informed that it is possible, but don't know how to do it.please can you help.one problem is I'm not upward on computers because of my age .but wouldn't be able to burn a few programes in mymedia player.because produce inwintv images is very very good .and shame) not being able to burn them down please help.waiting your answer

  Hello dunfordbob,

  Thank you for visiting the Microsoft answers Site.

  Which edition of Windows Vista you have installed?

  You can use Windows Media Center to watch and record live TV in addition to the Wintv application. Windows Media Center is included with Windows Vista Home Premium and Windows Vista Ultimate Editions.  In addition, Windows Media Center is available in Windows 7 Home Edition Premium, comprehensive, professional and Enterprise edition.

  For more information about using Windows Media Center to watch and record live TV, you can view the link below:

  Getting started with Windows Media Center

  I hope this information is useful.  Please let us know if you need more assistance.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tuner tv WinTV-HVR - 950Q with built in ir does not work in WMC

  I am running Windows 7, 64 bit. I use a Hauppauge Win TV - HVR - 950Q with IR, tv tuner built-in and I also have a remote control supplied with the tuner. I connect to a cable box. During the implementation of WMC, I get an error message that says THAT WMC cannot detect any IR material. Someone at - it successfully implemented this particular tuner? If so, can you tell me how did you have the IR error message. Any help would be greatly appreciated.

  See http://www.hauppauge.com/site/support/support_mce.html.

  You need the driver package to present the Media Center IR Hauppauge remote control.

• Cannot capture hdv with Premiere Pro

  I'm having a hard time capturing video from my camcorder high definition of Sony HDV - HC7. I am running Premiere Pro CS4 on a DellStudio running under Win 7 64 bit Ultimate system. It has a processor intel i7 CPU (8 cores) with 12 g of RAM.
  
  When I run first and select Capture it opens the capture window properly and allows me to control the camcorder. The camera is connected and working. However, it will not capture. I tried to capture several ways:
  
  1 connect the entry points and on the tape and then do a batch capture.
  2. Enter the whole band.
  3. manually press record at the correct stage is spotted on the camcorder.
  
  Each time the result is the same, nothing is captured. The meter reading displays the band plays and I can see the band playing, but the length of the recorded scene remains at 00:00:00
  
  I am connected via (camera) 4-pin to 6-pin (computer) via firewire. I tried two different firewire cables to ensure that it is not a cable problem. I don't have a capture card dedicated unless my Hauppauge Win TV HVR-1250 can be considered as a capture card. My firewire is out of the system tray, so I did not have a dedicated in system firewire card.
  
  I went through Adobe troubleshooting advice and none of these options helped.

  1. my hardware meets the minimum requirements

  2. recreate (even reinstall) cache does not help.

  3. I have tried two different bands with the same problem

  4. the connection cables work. I even tried two different firewire cables. The two show an iLINK on the camera connection and the capture window can control the playback of the camera without any problems.

  5 scene Detect is grey so I can't turn off, but I don't think it plays a role in the HDV capture.

  6. I checked my device control settings. The unit is set to sony and 1 alternate. I put it this way because I could not capture anything on the standard. I tried this setting and have captured a clip. After that, I could capture is no longer on the new setting. Even though I'm set to Standard or its replacement, the status of the camera is online.

  7 capture with another utility. I tried the software to capture from sony as well as first elements 8.0 and I have the same problems.

  8. make sure that all of the video was made. They are.

  9. Select playback (set to auto) settings.

  10. I'm logged on as an administratore

  11. I don't have a capture card. Do I need one?

  13. I run it with no other current main program execution.

  14. all my drivers are up to date.

  15. my video card driver is current.
  
  I must add that I have the same problem, try other software like Premiere Elements 8.0 and Sony Picture Motion Browser, so I think it's a hardware problem.
  
  I appreciate any suggestions. Do I need a dedicated video capture card? If so, what do you suggest me? Do I need a Firewire 4 pin, rather than a 6 port pins? Do I need a dedicated sony cable as suggested in some forums?
  
  Thanks in advance.
  
  wcameron

  my gut feeling is that the built-in firewire is not good. but before part you with little money for a PCIe version, it is possible, that you can test the device on another computer? just to rule out the camera itself.

  try to avoid really cheap FW cards. I envy those who have a TI chipset, but it's just anecdotal.

  MP

• Windows Media Center will not play a DVD, I get video with a loud noise and no soundtrack.

  When you try to play a DVD in Windows Media Center or media player, the video starts, but there is a loud cracking sound with no sound of music.   This Media Center has played the DVD in the past.
  My system is: Vista Home Premium
  NVIDIA GeForce 8500
  Hauppauge Win TV HVR-1600
  Realteck HD audio
  ViXS Pure TV - U 48BO
   
  I checked these devices using HP Hardware Diagnostic tools and they work.  I uninstalled the drivers and reinstalled.  Also updated all the drivers.

  Reading this forum, I tried to delete the file from library: %LOCALAPPDATA%\Microsoft\Medial Player

  So far, nothing has solved the problem.

  Thank you for your response.

  I went through the steps.  He has not fixed the problem.  The good news is that I stumbled upon a fix.  I've uninstalled and reinstalled the Realtek Audio drivers.  Which corrects the problem.

  Thank you.

• TV tuner

  I have a HP pavilion s5360f that since switching to the digital doesn't workIt is a Hauppauge Win TV HVR-1255(model 22xxxHybrid ATSC/QAM). It is digital?

  I think you must ask Hauppauge

• Media Player will not play sound on DVD.

  When you try to play a DVD in Windows Media Center 11 or media player, the video starts, but there is a loud cracking sound with no sound of music.   This Media Center has played the DVD in the past.
  My system is: Vista Home Premium
  NVIDIA GeForce 8500
  Hauppauge Win TV HVR-1600
  Realteck HD audio
  ViXS Pure TV - U 48BO
   
  I checked these devices using HP Hardware Diagnostic tools and they work.  I uninstalled the drivers and reinstalled.  Also updated all the drivers.

  Reading this forum, I tried to delete the file from library: %LOCALAPPDATA%\Microsoft\Medial Player

  So far, nothing has solved the problem. Neither thought I solved the problem by updating the Realtek audio driver, but he's back to do the same thing.  The only change on my computer has been automatically updated from Microsoft. Is it possible, there is a cause of conflict by an update?
  

  Are there still more recent versions of the driver at HP (even if not on your specific system page) or
  site of the manufacturer of the real device? Try installing the latest driver and BIOS and all the
  latest drivers and a mastery of the software (if any).

  Check these issues with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Using an ATI TV Wonder HD 750 PCIe and the Media Center can't find the analog signals of the conductor not to use a decoder

  I just installed a diamond ATI TV Wonder HD 750 PCIe on my 64 bit Windows 7 system (it's actually the second tuner card I tried) and still get the same problem. Media Center recognizes the card and both tuners analog and digital, but fails the analogue listening. I get digital very well. I tried to add a channel manually and still no luck. I use cable TV with no cable box and tested the signal on my TV and receive all channels.

  I also downloaded the latest Diamond driver and installed all updates more recent windows.

  In Media Center, I tried to automaticlly and manually select my signal and each combination, but available with no luck.

  Can you please help

  Rob

  
  Because, for an analog tuner, Media Center requires that said tuner is an MPEG2 Encoder (or that the manufacturer creates a software encoder which emulates this.)  The Theater HD 750 chip is not this, and it seems (after some looking) that ATI has not created a software encoder (side note: they are unlikely to do so, because they left the tuner market.)

  Out of curiosity, what was the 'other tuner"which has been tried before?

  Honestly, my recommendation would be to return the tuner (if possible) and get a combo tuner or hybrid that is known to work properly.  My first recommendation would be for a Hauppauge HVR-2250 (Council dual combo/hybrid), because it works wonderfully in MC as a tuner NTSC/Clear-QAM of combo/hybrid.  MC knows how to treat as what it is, and it works very, very well (I have not one.)

  That, or an AverTV Combo G2 (which is not as flexible as the ' 2250, where its slightly lower price.)

  HTH,
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• XP mode does not recognize my 6023E PCI card

  I bought a new Win 7 with a PCI slot inherited to execute an OLD NI PCI-6023E card I used for years.  I downloaded the drviers legacy NOR (7.4), but he does not see the card.  When I look in Win 7 the card is there but I can't run the 64-bit drivers testament and with my old software (C++).   I have connected a NI USB-6008 card and was able to open the card in XP mode... any ideas?

  Unfortunately, XP mode does not work with the PCI/PCIe devices, only those USB. Most (all?) programs virtualization will have this limitation.

  As you probably expected, the General recommendation is to migrate to the API OR-DAQmx for your application if you want to that support on Windows 7.

  If this is not possible, then there is a section of the knowledge base on a Beta OR-DAQ traditional (old) for Windows Vista and 7 , who might be interested. At a minimum, it will take allows you to use a 32-bit installation of Windows 7, not a 64 bit.

• HP Elite 800: Driver LAN PCI VEN_8086 & DEV_153A

  Hello

  Happy new year to all!

  I'm looking for some drivers, such as the LAN to my 800 Elite on Win XP 32 bit: PCI VEN_8086 & DEV_153A

  I have no choice of operating system...

  Where can I find it and how to install it?

  Thank you!

  Dahlia

  Hello:

  I would like to use this file.  DL, but do not run it.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5404560&swItemId=vc_116115_1&swEnvOid=4053

  Then download and install this free utility for files.

  http://www.7-zip.org/

  After installing 7 - zip just right-click on the network driver file and select 7 - zip from the menu.  Have 7-zip extract of: and let it extract the files in the folder name for easy identification.

  Once you do this, you will see a driver's record and the next folder below as E1D, then open that and find WIN7-32.

  Thus, prompt update driver manually navigate to: 7-zip created\E1D\WIN7-32\E1D6232 folder and select I217 Intel(r) connection Ethernet-LM in the list and see if the driver installs.

  The contents of the folder E1C has only XP drivers for ethernet adapters more older (I've looked).

• Who owns the Hauppauge WinTV 885?

  When I started my computer Windows me reported that he had found a new device and want to install the new driver. The rest of the message is:
  Multimedia video controller
  A problem with your TV Tuner
  TV Tuner stopped working because a compatible driver is not available for this version of Windows. The name of the model of your TV Tuner is Hauppauge Win TV 885 {CX 23885 EEprom}.
  I contacted DVICO, the TV tuner installed on my computer. They informed me that the Hauppauge WinTV 885 product isn't theirs.  Anyone met with this product and knows what it's related to? I tried searching but am not very computer savvy.
  Thank you

  http://www.Hauppauge.com/

  Their Home Page at the link above.

  Here, there is a support link.

  See you soon. Mick Murphy - Microsoft partner