Have CC and LR CS6 photography, cannot enter serial for CS6 more
A few months ago, I bought LR CS6 with serial number. I installed on 2 machines, and it asked me to connect and would identify my purchase very well.
I just bought CC photography Plan so I can get the latest updates LR CC and CC in Photoshop.
So disabled facilities base number so I could later on my primary machines. I have uninstalled and installed the new CC and it works fine when I connect.
However, now when I try to install LR CS6 on other machines, it asks me to connect and won't let me enter the serial number, just assumed that I am using the same subscription CC instead of my serial number. There is no opportunity to enter my own serial no and, of course, I don't have enough activations beyond my two main machines. I need to use the standalone serial number for my other 2 machines.
How can I solve this? Is there some special stand-alone installer for LR6? I thought I was using the original, but I don't know. I also tried to download one marked as just 6 of Lightroom, but the same thing happens.
99jon, I found a different solution which is a variant of what do you recommend. As I bought my standalone just now and there is no easy option to transfer licenses between the accounts, I was able to do this:
(1) create account for my wife with no permits at all on this subject.
(2) install LR and when necessary to open a session, choose the account of the wife. The application will say there is no subscription and you want to switch to mode of trial. There is no option to enter the serial number at this stage, to accept the mode of trial.
(3) close LR and re - open LR.
(4) now there is an option to 'buy' or something like that. When you choose this option, you can choose to enter the serial number. The serial number should not be on the same account, it is accepted and works very well.
Tags: Photoshop Lightroom
Similar Questions
-
I CS6 master collection when I try to open the first, I get a window subscription renew telling me my CC trial expired - I have purchased and registered CS6, how is that I can't open it?
Looks like you may have installed creative cloud and run CS6 from there. Please see this link:
'Renew your membership' window appears when you launch a creative cloud application
Using creative cloud | 'Renew your membership' window appears when you launch a creative cloud applicationIf you completed a trial and want more creative cloud, you must uninstall it, run the cleanup tool, and then reinstall your CS6.
These links may help:
Using creative cloud | Download, install, update or uninstall applications
Guinot
-
I have Lightroom and Photoshop cs6 on a windows computer. How to transfer these programs and to my new MacBook pro?
So, how can I do?
-
I have CS3 and the CS6 upgrade on my PC and want to load on my laptop for travel. I can?
Yes, you are allowed to have applications installed on both machines. The restriction being that the applications can be used at the same time on both machines.
You don't need to install CS3 if you prefer do not. You only need the serial number of this in order to get the active CS6.
-
Ideas:
- Programs that you have problems with MS OFFICE 2002
- 57 E error messages
- Recent changes made to your computer NO
- What you have already tried to fix the problem error code search
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hi halecky6,
Welcome to the Microsoft answers site!
(a) update you are trying to install? (It would be better, if you can provide the number of KB)
(b) are the other updates related to Windows from installing on your computer?
I suggest you try the following steps:
Step 1: Disable the software security and then try to install the update
Note: Activate security software once the test is completed.
Step 2: Download and install the update in the clean boot state
To perform a clean boot on a computer that is running Windows Vista, follow these steps.
1. click on start, type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
After starting the computer, download the update manually and try to install it.
http://www.Microsoft.com/downloads/en/default.aspx
Note: Return the computer to normal - reset the computer to start as usual (follow step 7 in the link) once everything is done.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
You can also post your question on the office community, please visit the link below:
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I NEED TO GET IN AND WE TRIED ALL COMBINATIONS AND IT DOES NOT OPEN. I NEED OF THIS DESPERATELY THAT I HAVE TO PAY THE BILLS. Help! PLEASE, I BEG YOU!
IS THERE A WAY I CAN GET AROUND MY PASSWORD.
I ME REALLY STUPID SENSE!
Start the computer in safe mode and log on to the built-in account named administrator . You will need to know the password, if any, for this account. Once, go to Panel > user accounts and change the password for your regular account. Boulder computer Maven
Most Microsoft Valuable Professional -
Currently have CC Adobe Illustrator 16.2.0 on 64-bit Windows and want to update to 17.1 so I can use the feature of living corners. Where can I download this update? It was not located where I thought it would be: http://www.adobe.com/support/downloads/product.jsp?product=27 & platform = Windows
Thanks for your help.
You must install app creative cloud where you can install Illustrator 17 and 18 versions
-
I have XP and office 2010, I can't upgrade for office 2013 should I buy windows 7
I bought office 2010 and it came with a free office 2013 upgrade when I try to install it tells me that he needs windows 7 or 8. is this correct
I bought office 2010 and it came with a free office 2013 upgrade when I try to install it tells me that he needs windows 7 or 8. is this correct
Unfortunately, you need windows 7 or higher to run.
Here are the system requirements:
-
Cannot type password for buy more storage iCloud
When I try to buy more storage via the iCloud pane in the system preferences panel, I can access the 'Complete purchase', but can only type the first character of my password in the field and nothing more. I can't click the field to insert my rear slider to type the rest of my password, but I can click on the link "Forgotten?" for password recovery. By clicking on the field to type in my password, it selects the box. I don't know why this is happening, but it is not allowing me to purchase more storage iCloud. Help, please.
Thanks for the review! -A
The work around that was posted is to go into settings/iCloud on a device and make the adjustments there.
-
All the printed documents have text and graphics highlighted in blue
Hello
I running Windows 7 64 bit and I have an Epson Stylus Photo R800. Most impressions have text and graphics highlighted in blue. Printing for example a test print from printer properties page. If I do the same thing to my wife running 32-bit XP pc it prints very well. If I restart my XP pc it prints very well.
I have restored the oldest version I have, I removed and re-installed the latest driver of Epson printer and re-installed Windows on top of my existing installation and tried different settings for color management. All to no effect.
Epson say it is a question of communication and cannot me more help.
I help would be grateful for any help, I don't want to do a clean install of Windows 7 but it looks like my only option
Results OK
Reinstalled windows, fault gone
Transfer files and settings using Windows Easy Transfer, back of fault
Created the new user and logged in as that user, without fault
Reset all fault as my old account to its factory default settings, always there
Delete my old account and account created new, then the files transferred only to this account went fault.
If something in my profile has been the cause of the problem, but do not know what. In any case system of works fine now
-
connectivity issue local limted
HelloI have a problem of limited local connectivity.
I'm online but cannot enter certain websites because of this, and my laptop is running slowly.
to try and reslove this prob. I have: -
Restored to an earlier date
Router and the laptop reloaded
Connected wireless
and unchecked internet Protocol version 6
repaired, windows tell me that no problem of the internet are.
Can someone help before I have to consider the world PC boo hoo
Hello TillyTwo,
I suggest looking at the answer of Irfan in this thread that seems to relate to your specific question: -
I get a message that says that I do not have access and enter an administrators password
I have a desktop HP running windows XP. I get a message that says that I do not have access and enter an administrators password. I am trying to download a virus software. I noticed that the security of the window manager warned that no virus software has been found. It doesn't let me do. I own the computer how do? Are there real ideas that will actually work so I can get control of my computer?
* original title - cannot control my computer. Don't know password * administrator
Hello
1. have you logged as administrator?
2. how many user accounts you created on the system?
Follow these steps and check if that helps:
Method 1:
I suggest you try to scan online antivirus in your computer and check if it helps:
http://www.Microsoft.com/security/scanner/en-us/default.aspxMethod 2:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/310353NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.
Method 3:
Try creating a new user account and check:
http://support.Microsoft.com/kb/279783It will be useful.
-
After purchase, installation and activation Fusion 6 with the license key, I had a library of VMS showing 2 Boot Camp partitions. It's strange that I only have 1.
I tried to activate them but received a message that it is out of date in 2 cases. (see annex 1)I started a new virtual machine with a Windows 7 installation disc directly on my HD. I have provided a way to do this and followed the instructions of Fusion to the screen.
Apparently, everything went well and after several restarts, the installation appears to be over (see annex 2) I tried to open and run the installed Windows 7. I had however a window with the following message:
"Pending the unit.
"VMware Fusion cannot enter the unit. Please wait until the unit starts automatically, or interact with the virtual machine below. ' (see annex 3)
Here Windows 7 seems to start but after a while with the home screen and of the Øresund finishing this window closed and open a new window called library Virtual Machine on the left showing the partitions of Bootcamp and the Virtual Machine Windows 7 x 64 and in the middle gray a representation of what is supposed to be the Windows 7 desktop. (see Exhibit 4). When I opened the settings button a window with different setting options pops up. This mark means to me that Windows is installed but the final opening isn't the case
When you quit Vmware Fusion indeed Windows seems to be close (see part 5)
What is going on? What has gone wrong? What should I do? I don't know how to solve the problem.
I should f.i. remove the virtual machine from Windows 7 and is free automatically made partition on my HD as the reboot with the Windows installation disc? or y at - it another way to enter the UNIT?
Help, please!
Thanks in advance
Your virtual machine is running. It is in the unit - which each windows gets its own window of Mac - and you have no application Windows running, there is no visible windows. You can start a Windows application in the start of Fusion menu in the menu bar at the top right, or turn on the Windows task bar on the view menu and start applications from there. Or use the view menu to switch to the Single mode or full-screen, which puts all of your Windows desktop in a window separate from Mac.
You do not have two partitions to Boot Camp on your Mac, you have two virtual machines named "Boot Camp partition".
The message about it being unable to enter the unit arrives while the merger is pending for the tools begin to run, because the tool is necessary for the unit.
-
Hi I have a current plan of photography for £8.87 per month which is paid and up-to-date, it allows me to use PSCC and LR. I've updated the two about a week ago and now LR is ok but PS says it's now a trial and I want to buy it and my trial runs out soon? How can I get to the scene, I was up front with the full version of PS?
Hello
Please follow the steps below.
Solution 1: -.
1 sign out and sign back for creative cloud.
https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html
Solution 2: -.
Check the "hosts" adobe entered into file. (If you don't see all the entries of adobe, go to solution 3)
1. go to the location of the file "Hosts".
WIN: C:\Windows\System32\drivers\etc
MAC: Go to the menu finder on top > go to files > type '/ etc', press return.
2. move the file hosts on the desktop.
3. open.
WIN: Open it with Notepad.
MAC: double click on it.
4 remove all entries of adobe, that it does not obstruct your machine to connect to the Adobe's Activation Server.
5. rear move "/ etc" folder.
Solution 3: -.
1. check if you are using any kind of firewall (network/system) / proxy.
2. turn off firewall / proxy.
I hope this helps.
Kind regards
Vivet
-
Hello, I just installed CS6 master collection in the history of the order, and when I try to enter the serial number it tells me that: serial number you provided is valid, but no product calling can not be found on this computer. Then it gives me options in the drop-down menu, but the Master Collection CS6 is the only one not listed is not in a menu drop-down.
Your CS6 must have been bought an upgrade. He asks you to select/provide is the name/serial number of the previous version, you bought that qualifies you to install and activate the CS6 upgrade version... it would probably be CS5.5 CS3.
Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5
http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html
Maybe you are looking for
-
Preparation for the upgrade of Windows 2008 server to a more recent version of IIS
I am preparing a server from IIS 7 to IIS 8.5 upgrade and installation of Wordpress. Based on my past experience with Windows, I just want answers before you begin the process of upgrading to these questions. After the upgrade to IIS 7 to 8.5 IIS era
-
Impossible to activate webcam Lenovo S206-is
I have a Lenovo Ideapad S206. I can't get the camera is activated. I get the message cannot open the camera. I uninstalled and reinstalled. I tried downloading the drivers. Nothing works. When I turn on Skype I get message NO WEBCAM FOUND. CONN
-
Connect to another computer via VPN
How to connect to another modem with VPN network. The other computer is connected directly to the modem.
-
do you need a subscription to comcast or another Internet service provider to be able to use outlook express mail? Can you use it if you are in a hotspot and how you set up? Thank you
-
Customer auditor of Java (TM) update has stopped working
I get this message every week (once a week - same time, same day): (Java (TM) Update Client Checker has stopped working.A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is avail