Have I not contradictory of the antivirus programs

Similar Questions

• Trojan virus that is not detected by the antivirus program

  I have a desktop hp pavilion a1600, OS is windows xp.  I was unable to open windows a few days earlier because of a "corrupted file".

  I did a repair that allowed me to open the windows and go online, but programs were listed as still installed, but I have been unable to open one of them.  I uninstalled and reinstalled but still the programs did not properly. I ran programs antivirus, malware and spyware, but the computer still does not properly. I tried a download to see if it works and I was able to download, but impossible to run or save the file.  Therefore, I reformatted my computer (everything went anyway and tried to hook up to the internet, but now my modem will not yet configure.  I learned by my support for my modem (actiontec M1000) after 3 hours to try to do this I got a hack trojan virus that was undetectable by antivirus software.  Any suggeestions?

  Did you install your Chipset, LAN (network), drivers etc. mailed under original down drivers ICI

• I tried to load Flash Player on my XP computer but have of find undesirable equipped engines, namely Binkiland and Bing, neither of which I wanted to and I can't delete them because they do not appear in the list programs. Can you please help.

  I tried to load Flash Player on my XP computer but have of find undesirable equipped engines, namely Binkiland and Bing, neither of which I wanted to and I can't delete them because they do not appear in the list programs. Can you please help.

  Hello Maria,.

  Thank you very much for the link, which worked well. Some of the other times that I tried to load Flash Player were presented by the site and also the search engine. You will understand that I am not very computer savy!

  Once again thank you.

  Chris.

• I installed kaspersky IPSec, but my centre of action always warn me to find the antivirus program

  I am using windows 7 Home Basic 64-bit last two days my pc tell me to find the antivirus program, but I installed kapersky internet secruity 2012 please help me

  Hello

  Here is a website on how to solve the problem.

  http://Windows.Microsoft.com/en-us/Windows7/use-antivirus-software-that-Windows-doesn ' t - search

• Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?

  Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?

  Disable the firewall and check the connectivity in media center.

• I am trying to improve my Creative Suite 5 to creative cloud but to myself that I have are not eligible for the upgrade, did someone knows why?

  I am trying to improve my Creative Suite 5 to creative cloud but to myself that I have are not eligible for the upgrade, did someone knows why?

  If you have the education version you are not eligible due to the delivery of the HIGH education

• I uninstalled a program that says he would remove the registry entries but the system subsequently restore says I have does not changes to the computer.

  What can I say?  System Restore is not useful for me.  Too often, there is no restore my computer to an earlier state.

  System Restore rarely admits that I had changed the computer - even when I uninstalled programs in the root directory.  What takes to "make changes to my computer?

  Install programs often has no changes - he said.
  Often the programs uninstaller is not make changes either.

  I did both today and could not undo the changes.  Tired of this.
  Save the register will take the place of the system restore?

  At least I can save the computer with Acronis True Image or Norton Ghost.

  Thank you
  Richard

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  What problem are you having this thing you that System Restore will remedy - or you're just in practice?  (It should still work).

  Some anti-virus / Anti-Malware tools 'protect' your system so that they will not allow a restore of the system work properly.

  For example, if you use Norton/Symantec products, you will see a message like this:

  Restoration incomplete. Your computer cannot be restored...

  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  Depending on what you use for malware protection, you may need to disable the product temporarily, to the restoration of the system, then
  Turn on the product.

  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.

  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  Well, it seems to work for some configurations.

  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.

  Give these ideas some consideration if they apply to you.

  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.

  No matter what you use, I do so and then only begin to solve any problems:

  Download, install, update and do a full scan with these free malware detection programs can solve any problems:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  It can be uninstalled later if you wish.

  The scans by operating clean, reboot, test and we can fix any other issues.

• Everyone knows is not recognized by the right program file extensions?

  I use CC - show all, Win 7 Pro and Win 8 Pro on a second PC. Only the Win 7 system shows this issue, but the two systems have identical software. Click on an inDesign file and Acrobat tries to open it.

  Click a Photoshop file and an HDR app called "Luminance" tries to open it.

  Use the traditional method to choose program to open files with is a waste of time. They always try to be opened by the same apps. I'm not a newby here. I know my path in the registry and tried to change it to put the file in relation to the program. Next time you start and it's as if I have never changed the register in the first place.

  It's strictly a PC work, not the kind of thing that you expect to contract a virus or malware but I installed Microsoft Security Essencials and did a "home visit" in a well known AV company. Nothing extraordinary about each machine.

  When I bought this system in 2010, I had a problem installing Windows on it. I had to get a technician MS connect remotely and do the installation. (Hour and a half then it must have been considerable) but since then it is every day without any problem. With the exception of a suite of plug-in called onOne 5,6 and 7. Whenever I tried to use it with Photoshop, it would be open two versions of himself and go out or freeze Photoshop.

  There is only a single application in this sequel that I never use so part of restitution provided a stand-alone version of this app. I've pretty much convinced myself that their suite is the cause of the problem with file extensions, but someone to admit they have flakey software is like trying to make a horse to talk to another human language.

  The last edition began not long after I installed Luminance HDR, a free app that does a great job of tone mapping. I also use the Luminance on the second PC that does not display these one of these problems. He got so bad trying to install the app from onOne as a plugin, (another waste of money, he still kills Photoshop) I can use is more file manager to select a file to open with any cc Adobe program I have. Today I targeted the card mother and flashed the BIOS and replaced all the drivers with the new versions also.

  Always do, GRRRR! I can't believe I'm the only one who has this problem so I'm posting here in the hope I'm not alone and can get a pointer or three on how to solve this problem. No harm to hope, not there at - it?

  Ryadia

  In older versions of CSx, which has been controlled by bridge.  Edit/Preferences/file type associations.

• My WiFi access local shows I have NCC not go on the internet

  I am not able for my laptop to connect to the internet. I can get on with an ethernet cable. It says I'm connected but local only and from my laptop to the image of the world there is always a X it says that my WiFi adapter is up-to-date. Thank you

  Hello

  Thank you for writing to Microsoft Communities.

  In accordance with the discussion of the issue, it seems that you can not connect to the Internet on the computer.

  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

  1. what exactly happens when you try to connect?

  2. have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned from the link and later a update on the State of the question.

  Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please follow these recommended steps and post if you still experience the problem.

• Attachments not opening in the appropriate program

  I can't get my Yahoo email attachments to open properly with Windows Vista. I received an attachment that I downloaded on my computer and I had to hit 'Open with' and open it with Notepad for me to see. After that, all my eamil accessories open with laptop no matter if they wee images or text. I right click on some other attachments downloaded to try to open them with their corresponding program and now nothing opens at all. Even the files that need to open up in the laptop just came as symbols, not the words. Any ideas on how to reset these default values?

  Thank you

  Hello rsdan84,

  Go to start, programs by default.
  You can then go to set the default program and access.
  Along the top of the page, you will see the name, the Description and current by default.
  If you click Default Current, there will be applications in alphabetical order.
  Highlight Notepad and you will see what programs the notebook opens by default.
  . CSS, .dic, .exc, .inf, .ini, .log and .txt to name a few.

  If you want to change the program that opens this particular extension, click on change program button and you can browse to select the program you choose.

  Let us know if that helps.

• 10 items is not listed in the installed programs

  I'm on Windows 10

  I think my version of 10 items is corrupted, so I bought the upgrade to 14. But I want to remove 10 before installing 14. However when you run the uninstaller Windows elements 10 is not listed. The help Instructions refer you to a Page where this problem is dealt with except that it is not...

  
  

• any programs, but google chrome opens. not even windows or antivirus programs. must force the restore windows or safe mode.

  the title says most of it. I got a virus which, for some reason usually let me open all windows programs or all programs like antivirus things or anything that would be useful at all, but ideally he always allows me to get on google chrome. Ive been reading around to see what is my problem and I can say that I should be good if I can just force a restore or get my computer in SafeMode somehow, but even that does not work. When I restart my computer, even if I press f8 when it is placed in service or f12 at the logo screen to get restart options, it does nothing. I see a way to solve this problem, unless theres another way to get into safe mode or perhaps force a system restore sort.

  Hello

  First of all, it is rare that system restore will fix a virus problem. You should focus on access to safe mode to resolve this problem.

  Check if you need to hit a function key lock before the F key working in the mode you want. You can also try this, even if the bug can block: click Start and type msconfig, then the . Click on continue in the UAC prompt. Go to the Startup tab, select the line of safeboot and click apply/ok. It should encourage them to restart and will automatically load safe mode.

  Once in safe mode, you will want to run full system scans with your favorite antivirus and antispyware software. You can also use malwarebytes (http://www.malwarebytes.org) as a method to remove bugs.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Need to find the Antivirus Program for beginning OSX 10.5.8

  Need to find an anti-virus program updated for OSX 10.5.8

  Desktop IMAC Intel Core 2 Duo 2.4 GHz 1 GB 800 MHz DDR2 SDRAM

  MOM is 86 with a touch of dementia, but still, she loves his Mac and he uses every day to read his newspaper and use Facebook. She cannot tolerate the change of operating system and it has an office with a limit of 1 GB memory. Norton support is no longer its OS after this month.

  Have you looked at other AVP and haven't found one that support this old BONE. I checked Kaspersky, Bitdefender and Intego, MacAffee with no luck.

  It is a prime target for phishers and other infamous trolls. Help, please. I'm in his State for today only and need to solve this problem. Thank you

  You don't need a virus scanner - there is no virus affecting the Leopard. And a virus program, even if you could find one, does nothing about phishing - it's a question of not no follow-up on the questionable links.

• Tab key does not work at the macro program

  Hello

  We have an in-house custom macro program that fills the fields in a web page displayed by Firefox.

  It is the window handle of the field with the circumflex, sends a string of WM_CHAR messages to fill it with text, sending a WM_CHAR message with a TAB character to change areas and repeat the above for the next field.

  This morning 15 Firefox updated itself, and now the program macro does not work. Specifically, Firefox is no longer changes fields form when it receives a tab character, and everything goes in the first field.

  No idea what happened?

  Better yet, there is a topic a chance: parameter of config to change to make it work again?

  Failing that, is it possible to revert to the previous version of Firefox 15?

  Thank you.

  Jack

  Good... ignore the above. It is a real problem with the update of Firefox 15, but a member of our staff has designed a work around for our macro program.

  See you soon.

  Jack

• Why have I not to open the iMessage application to see new messages?

  Whenever I receive a new message, I have to open the app to see, I don't get notification. This happens with all contacts and do not disturb is not the problem, and notifications are enabled for imessage. any help?

  Thank you

  I have my messages synchronized on my MacBook Air so if that makes a difference.

  Thanks in advance