Have picture but no dsound during playback of dvd videos.have checked the computer volume levels in system tray - everything ok
Help!
Hi silverfox16,
(1) is this problem limited to DVD videos?
(2) you get an error message?
(3) what is the file format of the video?
(4) who application\player you use to play the video?
Method 1: Run the troubleshooter of reading, then check
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
Method 2: Download and install codecs, see the link below
How can I find a codec?
You can see the article below for file types that Windows Media Player supports
Information about the media file types supported by Windows Media Player
http://support.Microsoft.com/kb/316992
Tags: Windows
Similar Questions
-
Get error message: C00D11B0 during playback of DVD video.
Original title:-Error Message: C00D11B0
played successfully Adam & Eve DVD videos. Now the above error message keeps coming up. Why can I not play these videos now?
Hello
1. did you of recent changes to the system before the show?
2. are you watching videos online?
3. How do you play the videos?
4. are you watch videos online or play using Windows Media player?
5. If you look online, what web browser do you use?
Please provide more information on the issue to help you further.
Also, I suggest you perform a clean boot and check if it helps.
Perform a clean boot.
To perform a clean boot and see if the problem still occurs, follow the steps in the below link.
http://support.Microsoft.com/kb/929135
Note: Once you are done with the boot, follow step 7 in the link to your computer in normal mode.
Let us know if it helps.
-
No sound during playback of DVD in Windows Media Player
- No sound during playback of DVD in Windows Media Player.
Media Center recently stopped working altogether, the message alleges a solution will be found, but he never comes to the top with one and there seems to be no resolution right ahead of internet, I can see others too have a similar problem.
So I would try Media Player, no joy it is thinking.
It reads the dvd no sound, I go into options and make sure the external emu sound card is set, yes all well, but as soon as I put it on youtube videos sound turns off by train to play media player so a sort of conflict, if I close Opera / chrome browser and reopen his is back.
Update or reinstall the drivers for the sound card in Device Manager, checking the PC or Support Downloads Web page of the card for more recent or different driver.
Physically, reinstall the sound card to make sure that the contacts and the slots are clean and tight connections.
If you have an audio chip embedded, try to use it to compare.
Try the VLC media player to see if it has the same problem.
Have you updated flash player for your browser?
Try another browser to compare.
Establish a clean boot, check for infection and then run the System File Checker of the steps in troubleshooting for Windows 7
For irreparable system files, run a repair facility.
It's much lower plant? If so Clean Up Factory Bloatware and consider to go from worst to best with...
Maybe it's time for a clean reinstall Windows 7? The steps in the link provide the best possible installation.
Report on the results of other ideas.
-
Windows Media Player Version 11 does not properly during playback of DVD
Original title: Windows Media Player Version 11
Windows Media Player has developed a jitter during playback of DVD, I have not modified parameters.
Hello
1. what exactly is the problem you are experiencing with Windows Media Player?
2. you receive an error message?
3. don't you make changes on the computer before the show?Method 1: Fix the term.
Solve the problems of Windows Media Player video and other media or library:
http://support.Microsoft.com/mats/windows_media_player_diagnostic/Method 2: If the problem is not resolved, you can try the procedure in the below mentioned link and check if it helps.
Read CDs and DVDs:
http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/play-CD-DVDHope this information is useful.
-
Satellite P100-188: his stuttering & distortion during playback of DVD and CD
Hello
My laptop has developed for the second time, what I can only describe as "stuttering and distorting" during playback of dvd and cd try to burn or rip a cd does not work either.
The first time this has happened was a few months ago and PC World did a reinstall of windows that solved the problem. It is now again.
Any help would be much appreciated.
and why you n t try to reinstall the OS again?
Seems to some operating system files or registry entries are corrupted. -
I just did an Adobe ID and bought Creative cloud half an hour ago. A single application (Photoshop) is being downloaded, but the rest of the applications on the Cloud Creative mac app say 'Try' / 'test Downlaod"instead of allowing me to download. I bought the Plan of all applications. Why is this happening?
Are you this announcement with two pieces of identification? I just bought creative cloud, but I always shows me a "Downlaod trial" option on the computer application + website
Your subscription to cloud shows correctly on your account page?
If you have more than one email, you will be sure that you use the right Adobe ID?
https://www.adobe.com/account.html for subscriptions on your page from Adobe
.
If Yes
Some general information for a subscription of cloud
Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work
Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud
-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
.
If no
This is an open forum, Adobe support... you need Adobe personnel to help
Adobe contact information - http://helpx.adobe.com/contact.html
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
-Select your product and what you need help with
-Click on the blue box "still need help? Contact us. "
-
Hi Srinivas
I have the same problem, my company is located in Singapore and I ' am assigned to Saudi Arabia, and I need enable the Arabic language (from right to left). Whenever I have check the box in the locale, I get a dialog box insert the CD I did not!
Now, is there a link I can use to download this file, preferably through your site (to not be deceived by the other download sites) even if its price?
Thank you
Sammi
http://support.Microsoft.com/kb/821080
You need your XP OS CD it can work if you borrow one.
-
CD/DVD is recognized by the computer, but does not
My CD/DVD is recognized by the computer, but does not... tried fix it did not help
My CD/DVD drive has stopped working. My computer recognizes the drive but when I put a disk in it cannot read. I tried multiple disks, but nothing will work. I tried microsoft fixit, but it does not work. He said that the media cd/DVD drive is not readable. Help, please.
Is that your CD/DVD drive is older than 1 year? Then, the drive may be defective, with a faulty lens.
I don't think that any form of manual registry change or fix tool will work in the situation.
S.Chatterjee -
I ordered the creative cloud Sunday and received a number control but still cannot open any programs. When I check the status of my order online, he says that he can't find it. Is this normal after 3 days? I tried to ask in a chat instead of the forum window, but no one answered and after 10 minutes, my screen restarted and closed window cat. It seems a bit frustrating not knowing what happened to my order and not being able to communicate with anyone. This habit with Adobe or are they just of technical problems this week?
Your subscription to cloud appears on your account page?
https://www.adobe.com/account.html for subscriptions on your page from Adobe
This is an open forum, Adobe support... you need Adobe personnel to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "still need help? Contact us. "
-or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
-
bad play a youtube video with the helmet and the computer behaves very well, if I use the internal speakers in my laptop and it happens to a strong section of the video, it will freez and spray the loud noise and I have to hard reboot, or bring up the Task Manager and cancel the Task Manager so that it can stop
Original title: sound recording play computer postilions while watching youtube videos and it freezes the computer often, it happens that when it reaches a sound louder
Hello
1 is this problem limited only during playback of videos in Youtube?
2 are you using Internet Explorer while watching videos online? If so, what is the version?
(See: http://windows.microsoft.com/en-US/windows7/Find-out-which-version-of-Internet-Explorer-youre-using )
3 did you changes to the computer before the show?
Method 1: Run the Fixit described in the article:
Playing video files crashes or blocking Internet Explorer - Windows
http://support.Microsoft.com/mats/video_freezes_or_crashes/en-usAlso run the troubleshooter of material to check if the internal speakers work properly or not.
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2: Put the computer to boot and search for the issue.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.
I hope this helps.
-
Impossible to navigate to and select the menu buttons during playback of DVD on TV
I use DVD Studio Pro 4.2.1 on iMac OS 10.6.8 (using old BONES of FCP 6.0.6).
I have two DVD players for my TV and a Sony DVP-NS57P-GE GE1105P.
For the video I created, I have two buttons on the main menu 1, 'Play' and 'Chapters' which goes to menu 2 with my links 7 chapters. This perfect mode DVDSP simulate all the works by clicking on these buttons, but I can not click on these buttons of menu 1 with one of my remotes for DVD player when viewing on TV. Movies usually have a menu with buttons like play, scenes, etc. that I can navigate to with my remote.
Remote controls work fine, I can use its buttons to move to the previous or next chapter while the video plays and the Sony has a strange menu page of access to the chapters but it would be awkward and should not be necessary. I just want someone to be able to navigate on my menu page 1 and select the link to chapters. Not really concerned about "play" button since someone can click play on the remote control.
So, I apparently need to change a few settings DVDSP. What I'm missing here? Google it and I tried manual DVDSP, but no luck.
Thank you very much.
Jim
No function edit posts, so I have to put this in a response, I guess. This layout of the forum is so bad, was so much better several years ago. It's looking like my post does not get a response for a reason, but in the cases where it does, I need to update.
It seems that I am able to navigate to these buttons, I just couldn't see that because the 'Selected' colors, I put to them do not work. I have all the colors of the selection state set for Normal, selected and active. When I use my DVD in my sell order DVD or mode DVDSP simulate with button style control remotely to this topic, when I browse to the top, bottom, left or right, nothing to change the color of links, so there is no way of knowing when I am on a link (I have 9 on a single page) and you want to select and then press ENTER.
I've hunted throughout the manual, google, YouTube and cannot find the answer to this problem.
-
Tecra S2 crashes during playback of DVD of battlefield 1942 or watch
Hello
I have a Tecra S2 with the following specifications:
1.73 Ghz
1 GB OF RAM
GB of Nvidia 6600Software:
Operating system recovery cd
MS Office
Norton Internet security
Logitec Webcam drivers
Sync Nokia Software
(all updates made)When I play Battlefield 1942 or watching DVDs, the laptop fails. The screen freezes just after playing for a while. Nothing works anymore but the reboot of the computer (with prolonged pressure on the power button). While I can play before the crash varies from 1 to 30 (+) minutes. It happens with battery and AC power (with and without the battery).
I tried to disable the sound card in the hardware Manager. I have disabled all programs beginning on startup with msconfig. I reinstalled the drivers of graphics (Toshiba download). I played a bit with the resolutions and other graphic parameters.
Nothing helps.
Any ideas?
Thanks in advance for the help
CharlyHello Karl
It's not easy to say why your device breaks down but the high temperature can be a reason.
If play you games or watch DVDs all the laptop parts (i.e. graphics card, CPU, etc) running at high performance and produce a lot of heat. In this case, you should check the cooling fans if they can work properly and if they are clean. If this isn't the case, you can use the vacuum cleaner to clean the fans. If the cooling fan is dusty it can t work properly and the temperature rises.Good bye
-
Why my Windows 7 crash/freeze during playback of ANY video
lets see someone can get their head around it because it's driving me around the bend.
Then... I have a media Center PC connected to my TV high definition VGA cable. I ran the XP PC for a long time, but last December, I've upgraded to Windows 7 with my laptop.
Mark 5 months of use of seamless media and integration of network - it worked like a dream and I played HD and SD content with ease.
About two weeks ago, I was watching a HD ".mkv" file in Windows Media Center and Gardner ten minutes in the video, the video just file - both video and audio. I had to turn off and restart the machine and started again the video file. Five minutes after the restart the video file, it hung again (not in the same place in the video). Then, I went and watched the video on my laptop , where it worked fine.
A few days after that (first time I had used it again since he hung up), I started to look at a folder ".avi" of sustainable development. About 1 minute in the video the screen lost its signal (come the little built in the chart 'no signal') and after 15 seconds following the audio cut out as well.
This latter behavior that happens now whenever I try to watch any kind of video SD or HD of any file extension. This problem is also independent of what player I use (windows media Center) and windows media player classic after a minute or if the display turns off and audio quickly follows.
Suffice it to say, I was a little annoyed but knowing a little about good the computers that I decided to try to solve the problem by taking the following measures.
(1) I uninstalled all my codecs and reinstalled the latest version of the K-Lite Codec pack. The latest version has support for windows 7 so I doubt that it is a problem of compatibility here. After doing this the problem persist, exactly the same as before.
(2) I checked the date of drivers for my card (nVidia MSI 6200) and saw that they were dated from September 2009. I went to the site of nVidia and found the latest drivers win7 dated April 2010 - I have installed these but the problem is still there.
(3) I thought, maybe it's a problem with the hardware of videocard real itself. When I built my machine, the parts supplier accidentally sent me two of the same video card so I swapped the existing for a version brand new brand of the same card. The problem is always EXACTLY the same.
So yes - I am quite annoyed and frustrated right now because I have absolutely no idea what is wrong with the machine and how she went from work not work almost from one day to the next.
I would add also that the screen is perfect when you are doing something else on the computer - I can surf, play youtube videos, listening to music etc, and it's absolutely no problem.
Put on a video, and it cancels to display, as I explained.
WHY?
halp.
HelloMethod 1.Change hardware acceleration
You can also try to change the acceperation of material in the middle and check (you can try different)
1. right click on an empty space on the desktop.
2. go in the resolution of the screen.
3. click on advanced settings, then click on the tab "troubleshooting."
4. set the hardware acceleration in the middle. (here you'll get the only option your video card sound support).Method 2.Uninstall video card drivers and restart the computer and let windows install the generic drivers and then check if the HD videos play fine.For more information see the links below:
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Automatically get recommended drivers and updates for your hardware
http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardwareMethod 3.
Uninstalling and reinstalling Windows Media Player and Windows Media Center:
Step 1.
Uninstalling Windows Media Player:
1. go to start and in the search type "Turn Windows willing or not.
2. click on "Turn Windows features on or off".
3. search for multimedia and uncheck the brand in the face of Windows Media Player.
4 restart the computer
Step 2.
Reinstall Windows Media Player:
1. go to start and in the search type "Turn Windows willing or not.
2. click on "Turn Windows features on or off".
3. find the multimedia functions and place a check mark in front of the Windows Media Player.
4 restart the computer.Note: Repeat the steps for Windows Media Center.I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Firefox crashes during playback of YouTube videos
This just started here yesterday. Whenever I go to play a video on YouTube, the whole program will freeze and crash twice for about a minute each time. This only happens on YouTube. No other Web site that plays videos has this problem. In addition, this only happens on Firefox, my default browser. No other browser installed on my PC has this problem. This problem also occurs when the page tries to load the comments on a YouTube video.
I tried to reinstall the Flash player and the Firefox. I turned off hardware acceleration on Firefox and the Flash Player. I disabled the Safe_mode in the Shockwave Plugin. I tried to open Firefox in Mode without failure. YouTube plays in HTML5 by default. Everyone knows about this problem? There must be a way to solve this problem.
Well I discovered that I can solve the problem by LOGGING in TO MY YOUTUBE ACCOUNT. I'll have words with the people at Google.
-
Satellite Pro 24xx: no sound during playback of DVD
I have an old 24xx Satellite Pro. It works fine and I don't know when that changed. Now I have no sound when I play a DVD. The image is fine. I made sure that none of the Mute check boxes are checked etc.
Just can not make it work. The only thing I installed recently is IE7.
Can anyone help please?Hello
Can you check the sound settings on the program that is used to play DVDs s?
I use the WinDVD to play a DVD on my computer. There are also other programs like PowerDVD or free tools that can be downloaded from the internet.
Maybe you are looking for
-
In the 24.3.0, version a message cannot drag one folder to the other. This problem remains when running in safe mode.
-
Hello I'm tracing a FFT of find a different frequency of the signals non-periodic signal. kindly help to plot the frequency and Amplitude. attachment have given amplitude time Vs
-
Impossible to update, help!
I use IE8, SP3 Windows XP home. I can't update manually. When I try, the page says "Internet Explorer cannot display the webpage". I also tried to update directly through the web page of Windows update but get the same results. Automatic updates is e
-
AdAware flashed a warning that he had detected that something called "packer NSanti-gen."
and I could delete it when you are finished scanning. The scan finished and neither adaware, microsoft security essentials or Malware Bytes is to find something other than the odd cookie. I was downloading a new framework of photo at the time who i
-
extracts the date of a DD-MON-RR part
I would like to extract and compare only the part of the date to a date, for example, I would like to know if an entrydate is equal or less than 9/1.But the date of the entry are all format DD-MON-RR. How to remove the part of the year and compare on