AdAware flashed a warning that he had detected that something called "packer NSanti-gen."
and I could delete it when you are finished scanning. The scan finished and neither adaware, microsoft security essentials or Malware Bytes is to find something other than the odd cookie. I was downloading a new framework of photo at the time who is now offline but otherwise everything is the same. Can someone tell me what's going on and if I have to be worried?
Under V Home Premium, SP2 so far then just as are all security definitions.
Thank you
Hello
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.
No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.
It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.
TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684
Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/
Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)
Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
Microsoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
also install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->
Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp
Try the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro
--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htm
Original version
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1
--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228
Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Tags: Windows
Similar Questions
-
Is there that something called "permission to start?
It is supposed to allow to choose what applications start automatically after turning on the phone.
Is this what? If so where is it?Like this, the permissions are not accessible to the user. They are defined by the developer of the app and when you install an application, it lists the permissions to applications for the app.
-
How to kill the cooling system warning that slows down the CPU?
Laptop: Satellite S2450-101
Please help me ;-)
I had problems with a fan on the motherboard connector. I'm a "craft" bridge to make it work. Now, I was able to control temperatures: I do the works of CPU to 100% and the temperatures indicated by 'SpeedFan' remains to the "Local Temp = Temp 36 ° C / 44 ° C and 43 ° C = Temp1 = remote." The exhaust gas remains 'soft' and never hot as bafore (60 ° C and more). Now, I think it's actually safe... BUT... I still have a lot of unpredictable warning that slow (and it's deep...) of the processor.
It is said (translation from the french): _ "WARNING: an error was detected on the cooling system." Shut down your computer immediately and consult our provider "_".
To be honest, I don't know if this is really the connector error... maybe other hardware (probe...) or a software problem. * I just can't use my computer with this warning... Please, help me to kill this process or perhaps only to stop the "crunch" of the processor *. I do research in the registry, but without success.
Thank you.
Best regards.
If I understand you correctly, you manipulated mainboard and now you also want to manipulate this warning.
As I know the owners of laptops have no influence on this warning and you can not disable it so just.
What would happen if each of us might be able to turn off all annoying warnings and ignore the material damage?Let's see what other forum users have different opinions.
-
When I have more now open tab and I use the x in the window close the browser I get the warning that I close x number of tabs. If I click on continue it closes the window. It's still all I had to do to end the session and close all. Now when I restart Firefox all tabs that were closed at the previous session appear on the new page. If what is expected, why do I get the warning. This just started happening. Version is 32.
Did you remove the user.js file because this file is the main cause of the problem?
With the extensions.autoDisableScopes pref, you can control where extensions can be installed.
It is one of the predefined files that define the default values for preferences (you can check these files through the address bar).- Resource:///defaults/Preferences/Firefox.js
// Disable add-ons that are not installed by the user in all scopes by default. // See the SCOPE constants in AddonManager.jsm for values to use here. pref("extensions.autoDisableScopes", 15);
- Resource://GRE/modules/AddonManager.jsm
-
I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?
Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:
I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?
I would like to point out something that you may not realize: Windows 8
has two interfaces; the modern/Metro Interface (which may be all the)
you have looked at) and the traditional desktop Interface. You can use
one or both. This traditional desktop Interface is almost
identical to the interface of Windows 7. the biggest difference is that
There is no Orb start clicking to bring up the start menu.But note that you can get the ORB start by using one of the many
third-party programs, are free or very cheap (the classic interface
http://classicshell.sourceforge.NET/ and debut8 to
http://www.stardock.com/products/start8/; my personal preference is
Debut8, but they are both very good). And goes from an interface to
the other is very easy; There are several ways, but simply by pressing
the Windows key is perhaps the easiest.Just install one of these two and using the traditional desktop computer
interface may be a better choice for you than going to Windows 7.
I use Windows 8, almost exclusively with traditional workstations
the interface and with 8 Start installed. If you were to look at and use
my computer, you may have a hard time realizing that it is not
Windows 7.
I also recommend to read "how to make Windows 8 or 8.1 watch and.
Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
I can't address the issue with your games, except to say that
whenever you move to a new version of the operating system, some of
which is used to run on the former does not work on the new. And it's
much more likely with utilities and games with companies
applications. -
Why I got the warning that I didn't not pay the Bill?
I bought Creative cloud photography plan from amazon. I received my new payment and invoice from amazon. But when I opened the LR or PS, I've always had a warning that I haven't paid the Bill. How can I solve it?
Your subscription to cloud shows correctly on your account page?
https://www.adobe.com/account.html for subscriptions on your page from Adobe
If you have more than one email, you will be sure that you use the right Adobe ID?
.
If Yes
Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud
-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
.
If no
This is an open forum, Adobe support... you need Adobe personnel to help
Adobe contact information - http://helpx.adobe.com/contact.html
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
-Select your product and what you need help with
-Click on the blue box "still need help? Contact us. "
-
I recently downloaded my favorite CD music in my I tunes library, how can you transfer this music on a USB Flash drive so that I can play the music through my H D - bike
stereo system.
I'm 10 Windows on my PC
Select the songs in iTunes, let them slip into a file Explorer window showing the flash drive, drop.
TT2
-
Recently I have not been able to forward my iPhone 5S for message store. I've never had this problem before.
When I looked to what to do, I realize that The Call Forwarding icon does NOT appear in the status bar when I try to transfer calls. How can I fix this please?
It does not work using * 21 * + 6 * 41412 * 2 #.
< personal information under the direction of the host >
Call forwarding is a function of carrier. Contact your operator.
-
will turn off Icloud delete photos all photos on I phone including those in my albums of the iphone, as suggests the warning when I try to close icloud photos?
Leave the Photos app does not, in itself, deletes images of iCloud.
Please provide the exact text of the warning that you see. We will try to decipher.
-
original title: Virus
I think I have a virus on my computer and and can not get the Defender to run. I get a pop up stating WARNING - identity theft attempt detected and it in the title of the best malware protection
Check this box
http://www.XP-Vista.com/spyware-removal/best-malware-protection-removal-instructions
-
When I turn on my computer, I get a warning that says missing entry: entry Rundll. What is c? What should I do?
Hello
You did changes to the computer before the show?
Method 1:
Step 1: Check if the problem occurs in safe mode:
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Step 2: If the problem does not occur in safe mode, and then perform a clean boot and check:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.Method 2:
Run the sfc scan and check if there are any file system corruption.
More information on SFC scan found in this document:
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747Method 3:
I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss. -
Solutions and problem reports is saying that hpqsrmon has stopped working properly... I went to download the update and received a warning that this file can potentially harm my computer... Please advise should I run this update...
If you get the warning on the download of an update of HP and IE tries to run the file, as long as you get the file directly from HP, it should be safe to run this file.
According to this link, hpqsrmon is part of the HP PhotoSmart. You can also try to go to the HP support site, the model of your HP to input product, then download the latest drivers associated with your version of Windows.
Once you do this there is a chance that the error will disappear, as the current version may be affected by a bug that has since been fixed by HP in their software.
-
Windows Vista, get a warning that I have a Trojan horse
Well, I'll start with the Trojan warning that keeps popping up, I tried to move it to the vault, and nothing happens. It is said he is in my system and should not be removed but the pop up warning me is really boring. Then my windows updates do not work, he repeats to me is not currently runnning and won't let me turn it on. Then my computer crashes every time I do anything and I have to keep restarting. I don't know if their related. I tried to restore, and he says that the process cannot be completed. I tried a few internet options and still nothing. Any help with this would be greatly appreciated.
Original title: Windows Vista problems
1. Please download the free version of Malwarebytes.
Update immediately.
Do a full scan of the system
Let us know the results at the end.http://www.Malwarebytes.org/products
2. Next you get advice from specialist about your problem via the links below.
-
After each start up my Dell Studio 540 with Vista, I get a warning that "Windows host process (Rundll32) has stopped working. Although this 'fault' seems to have no obvious effect on the following operations, it is very annoying to have to clear the window. I applied the suggested solutions elsewhere, but without success either. Can someone please help me - in simplistic terms that I am a silver surfer? Thank you very much.
* original title - yet another problem Rundll32 *.
Thanks a lot for the guide. Finally, I've identified the problem via the boot as in the NVIDIA driver. I've now updated that and everything seems to work fine - touch wood!
-
I have received a warning that nothing is saved.
Warning that nothing is saved even though it says back up is on.
Hi Gene Swinson,
Have you set up your computer to run automatic backups?
Perform a manual backup. At the end of the backup, see if the backup completes successfully and the caveat goes.
Reference: back up your files
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
IAM using cwgraph3D in my Vi. Apllikation (exe) works well on some PCs, but on others that the CWgrap3D is not loaded. The Vi is runnning without any problem that only the CWGraph3D is not loaded. Error message that is shown in the Panel before 'kon
-
using PostDelayedCall how to get the value passed through void * callbackData?
Can someone tell me how to get the data passed through void * callbackData? The following code, panel_ptr has the right address but still contains zero. void CVICALLBACK value_changed (void * callbackData){int * panel_ptr; panel_ptr = callbackData;c
-
hdmi TV/computer connection
How you connect your computer to a TV to view the photo. I have the hdmi connector Moved from feedback Original title: tv/computer connection
-
Allow Android APK submission directly to BBW
It would strongly increase the amount of apps in BBW and how many developers android release their app on bb as well. would be good publicity that the bb logo was also displayed in advertising for apps
-
Where can I find my custom Photoshop templates, I did via the finder
Where can I find my custom Photoshop templates, I did via the finder?I use a more updated version of the cc 2015.5 PS.I used Adobe Capture to create patterns for use in Photoshop.I saved the patterns in photoshop and can not find them in the finder (