HAVE PROBLEMS WITH HDD EXTERNAL TOSHIBA SATTELITE LAPTOP WIN 7

Similar Questions

• Problem with HD external Toshiba PX1267E - 1 32

  Hi all.

  I had an external hard drive Toshiba PX1267E - 1 32 for awhile now and its fantastic. I normally run on Windows XP, and recently, I started using Windows 7.

  When I plug in the external hard drive in, the password box opens, I get the password, indicates the password has been entered successfully, and I click ok.

  The HD is supposed to rev and load the data as another drive partition so that I can access the data stored on the hard drive of course, but this isn't the case on Windows 7. Nothing happens after I have well validate my password.

  I also tried removing my restriction password, but all that load is the password of the external HD partition. I am running in administrator mode, but nothing helped.

  Can someone please tell me how to load to the top of my "data" of the partition HD external Toshiba PX1267E - 1 32.

  Thank you much in advance,

  VoxT3R,

  Post edited by: VoxT3R

  Hello

  I'm not quite sure if it will work, but you can try to access the m windows * disk management * and can check if the HARD drive or partition could be formatted.

  Perhaps then the HARD drive would be recognized in my computer (Explorer) and you can access the HARD disk.

  Select this check box.

• I have problems with the trackpad on my laptop Pavilion g6 (2012).

  I repeated my mouse HP remotely when you use this computer because I always found difficult to use trackpad. On the use of the touchpad, he sometimes goes out of control with the scaling and scrolling text selection. I checked the driver to find she had the latest recommended driver. I walked into its configuration in the control panel with the intention to disable but can find no choice. I need two points of orientation:

  1. are there clear instructions on how to use it? (still not found)

  2. How can I disable it if the first is not successful?

  Thank you for your attention in this matter.

  Hello

  Find your product on a laptop number:
  http://support.HP.com/us-en/document/c00033108

  Find your operating system:
  http://Windows.Microsoft.com/en-CA/Windows/which-operating-system

  In some models,.
  On your TouchPad, you will see a light in the upper left corner of your keyboard. The light is usually orange. If it is on, this means that the TouchPad has been disabled.
  If you look to the top left of your trackpad, there is a dash of small circle.
  Press twice on the circle to lock/unlock your trackpad.

  Below you will find a link on the troubleshooting of the TouchPad. Click on "Disable TouchPad" and see if it still register as disabled.
  It is specific to Windows 8:
  Use and troubleshoot the TouchPad-
  http://support.HP.com/us-en/document/c03523373

  If this does not work, use the link below. It is similar to the link I put in my post above, but it's for Windows 7:
  Use and configure the TouchPad Windows 7-
  http://support.HP.com/us-en/document/c01876141

  Kind regards

  Visruth

• Have problems with the graphics card in laptop Amilo pa 1510 when you use the Windows 7 operating system

  Original title: ATI display driver my supposed UN stops and restoring it automatically when it Enmodepleinecran screen mode, why?

  When he restores it does in normal screen mode frozen, exit full screen running in background.

  What can be done to prevent this. I updated the driver software, but it had no effect

  So, what is the make and model PC?

• Windows 7 laptop. I have problems with my cursor. When I type, it jumps and anywhere else except where I type moves.

  Hello:

  I am pleased to say that I have really only one problem left to solve.  I have a Dell Inspiron N5010 with Windows 7.  I started having this problem immediately about two or three weeks after the purchase of this computer.  I have problems with my cursor.  A Laptop store owner who corrects laptops told me ' you type you're probably hit a key that throws the slider out where you type and be aware of this.  I really don't think that.

  Is that the problem is that whenever I type just arbitrarily the cursor jump to other sections of my screen where I previously typed something.  It's very frustrating.  Can you really fix that because a tech support person told me that "which cannot really be fixed with someone to take control of your computer, or there is a problem with the keyboard".  That's what he says.  "It could be a problem with the keyboard" and he concluded that it might have to be taken in a store or (sent to DELL (and I say no, no, no (Amy Whinehouse)).)  A lot of smiles.

  But in any case this problem can be corrected as any other problem?  I hate it when this cursor jumps around on the screen to the typed sections previously.  It does not have it on my desk.

  Please let me know.

  Lavenderjade

  Hello

  1. the problem occurs with any particular application or all applications?
  2. don't you make changes to the computer before the show?

  Method 1
  The issue may be due to some third-party program conflicts. I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest that you try to reduce the sensitivity of the touchpad and check if that helps.

  a. turn on your computer and log in to Windows as usual. Open the "Start" menu and click on the "Control Panel" option.

  b. double-click the icon named "Mouse"... The "Mouse properties" window opens. Go to the tab "device settings". Click on the button "settings". A window titled "Properties" appears.

  c. examine the left panel of the 'Properties' window and expand the option "sensitivity." Click on the option "Sensitivity to touch."

  d. reduce tactile sensitivity in moving the slider to the right, to the label of "heavy touch. Experiment with different levels of sensitivity until find you one suited to your needs.

  e. click the 'OK' button to close the "Properties" window Repeat the operation with the control panel "mouse". Your new touchpad sensitivity settings are now saved.

  Method 3
  I suggest you to update the drivers for the touchpad on the manufacturers Web site.
  http://www.Dell.com/support/drivers/us/en/555

  More information
  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab04

• I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.

  How can I solve this problem

  the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.

  If you are not a Subscriber cc then Dropbox or iCloud will work as well.

• HP 470 G3 laptop: I have problem with multimedia Audio Controller

  I have instaled Windows 7 ultimate 64bite on my laptop and instaled all the driver I have can not install for sound and can't find it. I have problem with Multimedia Audio Contorller I try to auto update, but it does not work. Please help me guys.

  Thank you

  I recommend that you contact HP technical support and submit a case of covered by the guarantee.

• Problems with drive HARD Toshiba MK1234GSX

  Hello

  I have an Acer with a secondary HD TOSHIBA MK1234GSX 9920.
  Since I installed Windows 7, I have problems with the HD.
  Upon restart, the HD is considered as having problems with windows: when I look in device management, I have this message "Windows has stopped this device cause it has problems. (Code 43) »
  I did a full scan (chkdsk), but no not found errors.
  If I turn off the HD, reactivate and restart, sometimes I can access the HD which works perfectly.
  Does anyone have an idea on this?
  Thank you.

  PS: Sorry for my English :)

  CHKDSK is not good to test a HARD drive for bad sectors, its only good when looking for errors of the filesystem (FAT32 or NTFS).

  Test the hard drive to find errors using DFT.
  DFT download: http://www.hitachigst.com/hdd/support/download.htm#DFT

  Download the ISO file and burn it to a CD - R disc (there is also a version on disk if it's easier).
  If you don't know how to burn an ISO file, read this guide: http://www.petri.co.il/how_to_write_iso_files_to_cd.htm
  Restart your laptop and boot from the disc of DFT.
  Choose the 'Advanced' test and let it run (it may take an hour or two).
  If you see a message in red box, the HARD drive is faulty.
  An error code 0 x 70 means there are bad sectors and the HARD drive needs to be replaced.

• Satellite Pro A120: I have problems with the installation of the graphics driver for W2k

  I installed windows 2000 on an A120, the system is fully packed and service updated before I even start to install the necessary drivers, I am unable to restart the system. I once, install as recommended drivers that I have problems with the graphics driver because it will not be installed because it requires a reboot and then I can't install new programs that require a restart that the driver has not been installed correctly.

  The laptop is a Pro A120, age of 1 week and came with XP home, because of this toshiba will not offer me support I changed the o/s even though they obviously support 2000 on this laptop, because they provide the drivers.

  Any ideas would be greatly appreciated.

  Hello

  Did you use and install the drivers from the Toshiba driver page right?
  The drivers of Toshiba W2k for Satellite Pro A120 have been published and are ready!

  But please pay attention to the Toshiba drivers.
  There are two different sets of Satellite Pro A120, with different drivers W2k!
  After choosing the good laptop and download the drivers please follow the proper installation order that is indicated in the document "installation instructions"! Check it!

  I think that if you follow this guide line everything works and runs correctly. Good luck

• Problem with uninstalling the Toshiba Bluetooth Stack for Windows

  Guys, I have a problem with uninstalling the Toshiba Bluetooth Stack for Windows v4.00.22 on my laptop Windows XP SP2. Whenever I choose to remove the "battery Bluetooth for Windows by Toshiba" (or "Bluetooth HID Switch Service") the installation program starts to prepare, but crashes after a few minutes - the only way to continue is to turn off the laptop.

  The same thing happens when I try to update the stack to the latest version - the installer says that the old battery has to be removed first and crashes after trying to remove it. So is it possible to remove it by hand? I really don't want to reinstall Windows!

  I don't have a copy of the original Software v4.00.22 to recharge so if you have a copy or know where I can get a copy I would gratefully

  Thanks in advance.

  I would try to delete the folder: "C:\Program Files Toshiba Stack.
  Registry settings will remain, but should be repaired after a new installation of the Bluetooth stack.

• I have problem with my western digital portable HARD drive it still crashes!

  I have problem with my laptop HDD digital West sometimes when I plug it to my computer, my computer does not recognize it. But when he recognizes I can access the drive, but sometimes it is crash and restart once again it always happens... .this which should I do please help me! I have 9 a quick response...

  Other usb devices work on this PC?

  WD provides a free test utility, Data Lifeguard

  http://support.wdc.com/product/download.asp?lang=en

  http://support.wdc.com/techinfo/General/errorCodes.asp

• I have problem with my Wifi drivers

  Hello

  I have problems with wifi on my laptop.

  my product number is QC400AV hP PAVILIAN g6, I also have the problem of the the wifi light which does not have the blue light. I don't know why after formatting my laptop which is a problem occurs or not. But I can not access the wifi I can access easily in the past.

  I had three yellow label in Device Manager. In other devices - 1) Ethernet controller, Network & Controller.I PCI SIMPLE controller through its properties and I find 2 different IDs, code FRI/PCI that ID you want? Please send me the message. These hardware IDS and Compatible IDS.

  Thank you

  Hello:

  Select the second download option...

  Download drivers and work very well for me using the option of download-only, do not to use the first option.

• Problem with scanning from the new laptop with Windows 8

  I have a Photosmart C4480 all-in-One printer/scanner/copier.  Since getting my new laptop, I have problems with the analysis feature.  I installed the software CD, and think I have downloaded the drivers for this printer.

  Indicates the serial number found on the bottom: model of regulation SNPRB-0721

  I hope you have a resolution for me.

  Thank you!!!

  I've found a workaround.  If I used Windows software to scan, it works correctly.  It works just not when I use the button on the printer itself.

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Hello! I have problems with the bluetooth audio

  Hello!

  Help, please! I have problems with the bluetooth, when I use jambox with my laptop for audio streams, the freezing of the computer laptop everything for every 5 seconds. I don't know wat to do...

  I would update the drivers of BT:

  http://us.Acer.com/AC/en/us/content/drivers/4732;-; Longs % 20V3 - 772G

  Select windows as the operating system 8.1

  Check if you have Broadcom or Atheros