have the COOD1197 error code will not play music

the music will not play, has COOD1197 error code. How should I do?

Could you please check with the following link...

http://Windows.Microsoft.com/en-in/Windows7/C00D1197

Thank you

Rather

Tags: Windows

Similar Questions

  • When I get a video as an attachment to an e-mail, my Windows Media Player opens the attachment, but it will not play

    Original title: Windows Media Player
    When I receive a video as an attachment to an e-mail, my Windows Media Player opens the attachment, but it will not play.  However, if I go directly to the appropriate site (Youtube, for example), Windows Media Player will play the same video it wouldn't play my email address.  How to play directly from the email address?
    What is the video attachment file extension? WMP does not play You Tube videos.
     
     
     
     
  • in windows movie maker, I made a film, but the disc will not play music, he worked before

    in windows movie maker, I made a film, but the disc will not play music of any other disk, in the past, I did what I do

    Hi Authorsz18,

    You are able to hear the music in the preview?

    Try to adjust the volume of an audio clip in the audio / music. And add music from the disc hard if you added songs to a DVD.
    1. right click on the audio clip > volume
    2 adjust the volume with the cursor.

    http://Windows.Microsoft.com/en-us/Windows-Vista/add-music-to-your-movie

    Bindu S - Microsoft Support

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Media Player will not play music files now that he used to play.

    I have Windows Vista and my media player has recently decided that it will not play some music files that it used to play. When I try to read, I got the error message saying that the file type is not supported by the player, or that the file was compressed by using a codec that does not support the player. Why has it started to do this, and what can I do about it? He is not doing it with all the music files, only some of them.

    Hello

    The ASF Format (Advanced Systems) is the preferred Windows Media file format. With Windows Media Player, if the appropriate codecs are installed on your computer, you can play audio content, video content, or both, that is compressed with a wide variety of codecs and that is stored in an .asf file.

    You can check the link below for more information on the types of media files that supports Windows Media Player
    Information on the types of media files that supports Windows Media Player
    http://support.Microsoft.com/kb/316992

    See the link below for more information on codecs.
    Codecs: Frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

    See also:

    Play an audio or video file: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

  • Error: Windows Media Player cannot play the file. The player can not support the Codec that was used to compress the file, MP3 downloads will not play

    Original title: MP3 downloads don't play no not on WMP

    My Windows Media Player recently stopped playing downloads from Amazon. I've never had this problem before. I installed VLC Player, has not worked... off the WMP in the Windows app, restarted, turned on the back and restarted... did not help. I get the message "Windows Media Player cannot play the file. The player may not support the Codec used to compress the file. This is for multiple downloads, so I don't think they would be all corrupted files.

    Hello
     
    Have you done any software or changes to the material on the computer before this problem?
     
    You mentioned that the files do not play on a third-party player as well. I suggest you to check if the files are corrupt.
     
    Method 1:

    How to Download Codecs automatically in Windows Media for Windows XP player

     
    Method 2:

    Resolution of the problems of reading in the Windows Media Player for Windows XP

    Information on the types of media files that supports Windows Media Player

     
    In addition, run the fixit from the link:
     
    Hope the information is useful.
  • Error Code 800706BE and the 800706BE error Code could not update windows. CSP as also stopped working.

    I can't update windows. I get to 800706BA and error Code 800706BE codes. I also get frequent error messages that Cryptographic Services like stopped working. I would really like to fix this way! Thank you.

    OPTION A:

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    OPTION B:

    You see the effects of a hijackware infection!

    NB: If you had no installed anti-virus application or subscription has expired at thetime the first machine was infected and/or your subscription has expired since or the machine is not been kept fully patched in Windows Update constantly, don't waste your time with any of the following: Format & reinstall Windows.  A repair install won't help!

    Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
    https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

    Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

    Otherwise...

    1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

    NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

    2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

    2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

    3. now run a thorough check for hijackware, including registration required before a proper Court, logs don't here. DON'T SKIP THIS STEP!

    I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

    If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

    Good luck!

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • When I try to install the update from Add-in for Microsoft Office file validation, I have the following error Code 80070641

    Hello

    When I try to install the Add-in for Microsoft Office file validation update, I get the following error:

    "Code 80070641 Windows Update encountered an unknown error."

    I have had problems with the Windows Installer service and think it's maybe part of the problem.  I use Windows Vista Ultimate (32 bit).

    I tried Microsoft fix 50202, but it has failed, error: "the Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

    How can I fix the problem with Windows Update?

    Thank you!

    I started a second thread in responses from microsoft I thought has a different problem, but he eventually be linked to this problem.  the resolution to this and second question are posted there: http://answers.microsoft.com/en-us/office/forum/office_2007-office_install/windows-installer-service-could-not-be-accessed/73261f27-273a-4b89-9106-3857b537e7ff

    Thanks for the help!

  • my cd/dvd is more listed on the computer and it will not play anything

    If I'm going to start the computer and then open cd/dvd is more listed also is absent from the menu equipment. I'm not a COMPUTER guru to take it easy with the answers. Thank you

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • I have the 43 error code for my iPod touch

    Whenever I am trying to connect my iPod to connect to iTunes (which by the way, is updated to the most recent), windows indicates that the device is defective or omitted of to connect/install.
    So when I troubleshoot it, the error code 43 appears. Everything he says is ""unknown device.""

    Any help?

    Hi Ethan_kim,

    I understand that you get an error code 43 for your iPod touch. I understand the inconvenience.

    A Code 43 error when Device Manager to stop a hardware device, because the material reported to Windows that is having some sort of problem not specified.

    This very generic message could mean a hardware problem real or it may simply mean that there is a driver problem that Windows is not seen as such, but that the material is affected by.

    I suggest you to contact the Apple Support to get help in this issue.

    -IPod support
    http://www.Apple.com/support/iPod/

    iTunes and iPod Support
    http://www.Apple.com/support/

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • 0x800CCC0E error code (will not send e-mail)

    I can receive emails, but cannot send. This is the message I get.  HELP to

    The connection to the server has failed. Account: 'mail.bellsouth.net', server: 'mail.bellsouth.net', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E

    Given that AT & T owns bellsouth, it could be also that AT & T changed its servers and you do not have the memo.
    http://www.att.com/eSupport/article.jsp?SID=KB401573&CT=9000039

    Brian Tillman [MVP-Outlook]

  • I can't get the window updates for download the 8007371B error message will not download fixit

    My update does not download automatically and prevents other things on my work pc 8007371b error code I tried all the step to fix it it keeps the fix it low loading also

    Hello

    1. What are the steps you tried?
     
    2. the specific issue with a particular update is?
     
    3. What is the error displayed when correcting, it fails to download?
     
    4. what hardware or software change has been performed on the computer before the question?
     
    Please follow the links below to solve the problem.
     
    The problem with Microsoft Windows Update is not working
     
    try to run the Windows Update.
     
    If the update fails while you can,
     
    View the results of the windows journal file.
     
     
    I hope this helps.
  • Songs are in the wrong format and will not play

    Although playing a list of songs on my Windows Media Player box appeared and said: the file you are attempting to play has an extension (.mp3) that does not correspond to the file format. Playback of the file may cause unexpected behavior.
    How can I change the format for the song will play?
    Thank you

    Although playing a list of songs on my Windows Media Player box appeared and said: the file you are attempting to play has an extension (.mp3) that does not correspond to the file format. Playback of the file may cause unexpected behavior.
    How can I change the format for the song will play?
    Thank you

    ==============================
    Chances are that the file will play in any case.

    Or... maybe worthwhile to try to use the following
    freeware to convert .wma format.

    Free Mp3 Wma Converter
    http://www.koyotesoft.com/indexEn.html
    (Mp3, Wma, Ogg, Aac, M4a, Ac3, Ape, Flac, Wav)
    (FWIW if you install the converter, you can
    Uncheck offerings from Yahoo and Dealio) (also... you
    may want to uncheck the CD Ripper and the Easy
    MP3 Cutter)
    John Inzer - MS - MVP - digital media experience

  • My iPhone think that my headphones are plugged when they are not if will not play music or alerts through the speakers. What should I do?

    My iPhone randomly started thinking my headphones are plugged when they are not. As a result, it won't play music or message/call alert through the speakers. What should I do?

    Try to push the helmet a few times to move the switch. If not, then please post something here and I'll be happy to help you further.

    AppleMan

  • Registry cannot load the HIVE file; Need to fix WITHOUT the Recovery Console, computer will not play my Windows recovery disk.

    I need to fix my computer, I got the blue screen of death with the following error message. Registry cannot load the file \systemRoot\system32\config\SOFTWARE "HIVE".

    I read all the forums on how to solve this problem. I tried all the means which have been enumerated. None have worked so far because I can't get my CD player to load to run my Windows XP Pro disc to start the repair.

    Is there a way to fix this without the disc. I can't the computer after Windows XP display until he went blue. It's a computer original systemax, but I have since rebuilt it me with the new motherboard, hard disk, cdrom, dvdrom, ram, fans, cpu, etc... I just got a new monitor and hung up and blue screen of death appeared after that I turned the computer back on. I tried to fix this for 4 days now. Someone please HELP me.

    I got it fixed. THANK YOU SO MUCH for all your help!

  • an unhandled exception error code will not leave my screen,

    An unhandled exception has occurred in a component in an application, Microsoft .NET Framework. Can't get rid of it, can not use microsoft update this message is running continuously, so will not delete or update anything for me

    Another post:

    An exception unhandled on sqlservr.exe, Ive had it for weeks, tried as much as I could so that someone unfamiliar with computers. Ive downloaded .NET Framework 4 and SQL Server 2008, as these seemed to be the ones to help, but not so much, Ive tried every anti virus (not all at once), that the side effect of this is that Windows update pushes to install service pack .NET 3.5, as well as the family pack, which downloads but usually install after Ive accepted the rules of M.S. and the Regs and will let no other updates install until This 1 is installed, what obviously will not happen at the moment. My computer opens with Just in Time Debugger informing me of this exception, which was created when I tried the free download of Visual Studio 2010, which is another that made it worse.

    Hi Kenny,

    It sounds like this may be due to a corrupt user profile.  See the following article for troubleshooting:

    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    I hope this helps!

Maybe you are looking for

  • Recover deleted video

    Dear all, I'm in a dilemma by importing all the photos and videos of the 5S for Mac (El Capitan 10.11.5) iPhone photo app and then chose "remove the point after importation." by mistake, I deleted the photo Mac videos. Is it possible to recover? I bo

  • Recharge iPhone reboot loop 6 Plus

    Good evening My iphone is in a loop of recharging and resetting. I'll try to describe everything, so please read the question completely. Tonight in out of work below 0 time, my iphone is dead. I went back inside and put my iphone on the charger. It

  • 6.5 OS manual update?

    Hello What is the expected time for the the manual for 6.5 OS update? There are several new features and would be very helpful of course for do it rather sooner than later.

  • iMac mailbox folders

    The folders and all their contents have disappeared from my mailbox of the iMac.  Can someone help me to get back them please? SM

  • Wireless router requesting domain username, password and logon

    I recently bought a router without wire - WBR - T2 - as my old netgear router has stopped working. I can connect via the ethernet fine connection and access the internet. But on my computer Vista laptop when I try to connect to the wireless network,