HD question or another IRQ problem?

Similar Questions

• Migrate SSDS to an another MBP - problem App Store now

  Hello

  Scenario: first MBP 13 "early 2011, second MBP 13" mid-2012.

  I had a little accident with a glass of orange juice and the 2011 MBP just next door. Say no more, it's a classic. I could get at least the SSD unscathed.

  In any case, I got my hands on basically the same model MBP. It is just over a year the most recent. I like to use the 500 GB SSD with El Capitan and bootcamped Win10 of the MBP 2011 as I just swapped it with the HD to MBP 2012.

  So far so good. Double it starts perfectly and everything seems to work except the App store. I checked everything suggested for the "cannot connect to the App store" problem, but none of them worked, terminal settings, Keychain, time hacks etc etc. I guess it has something to do with the fact that the SSD is still material information of MBP, 2011 somewhere and now that it's running on a different model (very slightly) I'm stuck on the App Store. Of course, I am the legal owner of these two Mbps.

  I would be very grateful for any hint how to get around this, even with a terminal hack. I have no time to reinstall. I need the SSD to stay the main system disk where a moment computer migration is no option.

  See you soon

  Learn the following Apple support details. Mac App Store: frequently asked Questions (FAQ) - Apple Support

  Perhaps, it will provide more information.

  Kim

• IRQ problem the appliance on a 4060XCDT

  I have a problem the device IRQ holder ACPI, here is the System Info:

  IRQ Holder for PCI IRQ Steering ACPI
  System
  This device has a problem: Code = 10 (0xA)
  This device is not present, not working not properly, or does not have all the
  drivers installed. See the documentation for your hardware.
  The registry key: HKEY_LOCAL_MACHINE\enum\ACPI\ * PNP0C0F\00000005
  Alloc resources: None
  Forced resources: None
  Start resources: no
  Filtered resources: None
  Core resources: no
  Driver: System\0024
  Driver date: 23/04/1999

  Can anyone help?
  Win 98SE operating system

  Hello

  Please see this Microsoft support site:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;182628

  There you should find a solution.

  Good luck

• Turn on 15 in 1 card reader it was off for another troubleshooting problem

  All trying to solve another problem the 15 in 1 reader was off another problem has been resolved the reader was not been turned back on help

  I saw not a device with an option switch for the card reader, but I didn't know of every unit ever made.

  What is the product number?

  Do you know where it has been disabled?  Coincidentally, it has been disabled in Device Manager?

  The card reader should be listed under the following image-based disk drives.  You can try to uninstall/reinstall the card reader (s) of the device, as Manager indicated to half way down in this document.  The document is for Vista, but the steps are similar for Windows 7.

  

  In Device Manager, a disabled device will have an arrow icon down on it.  If it does not indicate that it is disabled, right click on it and selecting activate should allow it.

• M60-176: Question about a display problem.

  This week, I bought a m60-176.

  I noticed a slight halo of light on the entire length of the lower part of the screen when I put a totally black image. I was wondering if this was normal or if it was a defect on the screen.

  Everyone has experienced such a problem on a Trubite screen?

  Hello

  Well, it's not easy for me to tell if it s a normal question. In my view, the screen should t has a color differences.
  The laptop is the new unit. I recommend you put the laptop to your local dealer. Maybe it s something wrong with the display.

  Good bye

• T61p: Question of another DVI output

  Hi all

  Recently my T61P and docking station advanced stopped DVI output. It seems to pass in and out at random: it will work for an hour and then the monitor will lose the signal for another hour.

  Restart does not help.

  Upgrading the BIOS did not help.

  Play with all the settings of the monitor to boot in the BIOS, as well as the reset to default values has not helped.

  There is no software change that precipitated it.

  The operating system detects an external monitor and can read its EDID information and extend the desktop to this monitor, but the screen does not receive a signal.

  I tried cleaning all the contacts of docking with a soft brush.

  Every now and again signal will come back and then later disappears shortly thereafter.

  PC Doctor detects any problems in his essays.

  I tried with the other monitor, different, new docking cable DVI, but it is reproducible with all these changes.

  My guess is that the ThinkPad should go to a service center, but so I hope someone will have an idea of what else I could try that might help.

  Thanks in advance,

  Luke.

  by 110 degrees your GPU is already close to collapse temp. He must cut around 90 degrees.

• integer to another class problem, please help :D

  I tried a day now to solve this problem and I'm stumped. Could someone please point out what's wrong with the following code? I'm moving an integer of a class to another.

  ButtonField nextBut = new ButtonField ("Next", Field.FIELD_HCENTER) {}
  protected boolean trackwheelClick (int status, int time) {}
  If (firstChoice == 0) {}
  Dialog.Alert ("you must choose!");
  }
  else {}
  int firstChoices = firstChoice;
  UiApplication.getUiApplication () .popScreen (Ui.getUiEngine () .getActiveScreen ());
  UiApplication.getUiApplication () .pushScreen (new newGame3 (firstChoices));
                     
  }
  Returns true;        }
  public int getPreferredWidth() {}
  Return Display.getWidth ();
  }
  Protected Sub paint (Graphics Graphics) {}
  graph.setBackgroundColor (Color.BLUE);
  graph.fillRect (0, 0, getWidth(), getHeight());
  graph.setColor (Color.RED);
  Graph.Clear ();
  Super.Paint (Graph);
  }
  };
         
  nextBut.setFont (Font.getDefault () .derive (Font.BOLD));
         
  FieldChangeListener lnextBut = new FieldChangeListener() {}
  ' Public Sub fieldChanged (field field, int context) {}
  }
  }
  ;
  nextBut.setChangeListener (lnextBut);
  VMAN. Add (nextBut);

  the other class

  public class newGame3 extends form {}
     
  public newGame3 (int firstChoices) {}
  LabelField t1 = new LabelField ("new game 3" + firstChoices);
  Add (T1);
  }
  }

  I think Rexdoug meant firstChoice.

  Give a look at this example. You should get whats wrong on your code.

  public class TestScreen extends MainScreen
  {
      int firstChoice = 5;
      public TestScreen()
      {
          ButtonField nextBut = new ButtonField(" Next ", Field.FIELD_HCENTER | ButtonField.CONSUME_CLICK);
          FieldChangeListener lnextBut = new FieldChangeListener()
          {
              public void fieldChanged(Field field, int context)
              {
                  UiApplication.getUiApplication().popScreen(Ui.getUiEngine().getActiveScreen());
                  UiApplication.getUiApplication().pushScreen(new NewGame3(firstChoice));
              }
          };
          nextBut.setChangeListener(lnextBut);
          this.add(nextBut);
      }
  } 
  
  class NewGame3 extends MainScreen
      {
          public NewGame3(int firstChoice)
          {
              LabelField t1 = new LabelField(" New Game 3 "+ firstChoice);
              this.add(t1);
          }
      }
  

  Concerning

  Bika

• Composition within another composition - problems

  I have a composition within another composition, but for some reason, the elements inside the composition of the 'child' do not appear where they should do the loading of the page. If I move the edge of the Explorer by a single pixel or more... they all go in the right position.

  The site is Ord River Sports and here are the screenshots.

  Anyone know what is happening here... Muse bug or I do something wrong?

  The loading of the page (no icons and nothing is aligned)...

  

  Once I drag the browser a bit (everything works fine?) ...

  

  So, I realized what was causing this problem. It was the SVG icons. I replaced all the SVG with png and it works perfectly.

  Adobe... SVG is causing this issue. Please take note and correct this bug. I also noticed that SVG cause major problems with the widget Menu engine Muse themes.

• Import from another catalog problem

  Hi there anyone able to provide assistance.

  I have 834 images in a catalog that I captured on an assignment and would like to import into my main catalog on my desktop.

  When I select import into another catalogue (launched from my catalog of office), I get the following dialog box. The problem is I can see no sign of these files anywhere on my main catalog either through Lightroom or Explorer and for some reason usually allow me to save all 834 files in this catalog. I even tried to change the file names of all 834 files with the same result.

  I do not want to import these files through the import method, as I have already done editing files and would like to keep these corrections.

  I am a loss as what to do next - anyone with any suggestions?

  Robert

  

  Hi Boley

  • Open the catalog from the old
  • In Lightroom (library Module) go to the library > find all missing Pictures(Menu bar)
  • Also check how many photos does in all of the photographs
  • Check how many of them is missing (a new option will appear photographs of missing persons)

  

  Lack of files in the develop Module, they will have to tick ' ! . Sign

  Concerning

  Assani
  

• Lenovo WiFi question and Standby / Hibernate problem

  I have a Lenovo 3000 v200 laptop under Windows XP SP3 (recently retired).

  It is fully updated with all Windows updates and updates from Lenovo and no change in

  material has been done.

  I have two annoying problems. I searched the forum good responses

  (many other users seem to suffer from similar problems) but no solution has been

  presented.

  1. my wireless connection works 95% of the time without problems.

  But occationally the wireless fails to launch when I start the PC.

  I have nothing bring WiFi on, only a reboot will solve

  the problem. I tried to play around with the options available

  via the WiFi software without success. Some networks are visible

  even if the hardware and software WiFi switches are 'on '.

  Device Manager does not indicate something wrong with the unit.

  I saw this message several times: "battery wireless failed to launch.

  Someone at - it a solution for this (restart to the exclusion, that is)?

  2 standby does not work. When after a wait of some processes

  You seem to lock up most of the resources of the system. One of the hearts

  works at 100% load and the other is inactive. Research in the Task Manager

  I see several processes competing for the top position in the CPU usage.

  I get not a clear idea of this process is the problem, but I think it's safety

  Associates. There seems to be a driver problem, rather than the result of my software

  (Firewall, Antivirus,...). I guess that since the same software works well with

  watch over my other laptop (also Win XP SP3). Apart from monopolizing the

  System resourses the problem does not prevent me to get online and

  in collaboration with most of the applications.

  Hibernation does not work. During the recovery, the PC crashes completely

  (before that the Office is reached) and it will not meet any entry, a material

  reset is necessary.

  Any thoughts on the above problems?

  Everyone has the same problems?

  Suggestions for updating/making drivers back?

  Happy for Fredrik advice

  Sorry for bringing This new thread since no one else seems interested.
  I however managed to solve these problems on my own, so I want

  share workarounds if by chance anyone would win.

  First one quote another post by myself:

  «Sometimes when I boot the PC will connect to the network and everything works fine.»
  At other times, after start-up, the "wireless stack initialization failed, error code: 118 ' problem

  and the only way to fix it seems to be a restart of the PC. Anything else I do to display the network.
  If I look at the tab network layout in the Task Manager indicates that none of the adapters are available (cable eth.
  Access also fails).  This is obviosly a problem with the Access Connections software
  Since the wireless network works well when I let windows manage... »

  So there is no real solution to the problem WiFi only workaround is to let Windows manage the

  WLAN security. I used the laptop for two weeks now and wireless works perfectly under XP

  control.  What have I done? I edited my profile of connection in the dial-up connections:

  Open connections > location profile tab > select profile > wireless settings tab > option 4.

  Wireless security type = use Windows to configure wireless network

  I must say that the logins is useless to me now. It does not allow me to view and select

  wireless networks, but which can be done both through the windows graphical user interface. However, I can use

  graphical versions of Ping, Trace Route and IP Config (in the dial-up connections) if I want to.

  The solution to the second problem was easy as soon as I find the culprit.

  This problem is also related to WiFi, apperently drivers Intel WLAN/material

  can not handle standby correctly

  http://support.Microsoft.com/kb/951447

  What have I done? I stopped windows turning off the wireless network adapter to save power:

  Open Device Manager (for example the Panel > system > Hardware tab) > right click of the WLAN card >

  Select Properties > power management tab > clear the check box to be able to save.

  "Allow the computer to turn off this device to save power".

  Sleep now works as expected. I have not tried Hibernation and do not hear.

  Could be useful to someone.

  / Fredrik

• Question of another hierarchy cube ASO

  Hi all
  
  IAM trying to build one hierarchy of another cube of time dimension ASO
  
  Hierarchy is as below
  
  Date
  -> years
  -> Qtrs
  -> month
  -> Days(01-01-2010)
  
  For example:
  
  Date (GEN 1)
  -> 2010 (Gen2)
  -> Qtr1 (Gen3)
  -> jan (Gen4)
  -> 01/01/2010 (Gen5)
  -> 02/01/2010 (Gen5)
  
  IAM another hierarchy of construction for the weekend that our company need to analyse certain measures on a weekly fashion
  
  
  IAM trying to build this way
  
  Date (GEN 1)
  -> 2010 (Gen2)
  -> week_end_sat (Gen2)
  -> 02/01/2010 (Gen3)
  -> 09/01/2010 (Gen3)
  
  
  
  I did test
  
  (1) I tried to built a shared Gen5 member and I did and when I tried to build another hierarchy to knowledge of generation different Gen3 iam facing problems with the rule files
  
  Unable to build a rules file with correct size of IAM properties
  
  
  Please let me know if you have any idea it would be great.
  
  
  Thank you
  Riou

  You need several hierarchies enabled. 2010 weekend Sam must be stored separate hierarchies.

  BTW - it would be easier and I think on a higher functional level if you have used a dim attribute instead of an alt roll up, but your choice.

• Build the option export to another workspace - problem

  Hi all
  
  I have a page with the two regions. Logically, the two regions are mutually exclusive, only must never appear. I have created a compilation called "Simulated Login" option and set the option of compilation of region 1 to "{not simulated Login}" and the option of compilation of region 2 to «Simulated Login» When I run the page and the build option is excluded, I see only region 1. When the build option is included, I see only region 2.
  
  I have a problem when I export my application to a different workspace. Region 2 compilation option is still defined as the original application, but region 1 build option is not set after import - it should be "{not simulated Login}" but instead, it is empty. Now, when I run the page and the build option is excluded, I see only region 1 and when it is included, I see the two regions.
  
  In the meantime, I'll create another obvious option of compilation as a workaround - I'll have to make sure I have keep the two build options defined as opposed to eachother!
  
  Request Express 3.0.1.00.07. Database: 10.1.0.5.0 - Production
  
  Kind regards
  
  Jerry

  Jerry,

  You're absolutely right, good grip. We'll fix it.

  Scott

• I asked this question before, and the problem has been resolved, although the problem came once again.

  The https://support.mozilla.org/questions/959992
  This has already been done, but he still plays for some downloads of mp3, mp3 instead of ask me where to save the file.
  Is there a way to fix this?

  Ah yes, I remember now.

  From 26 of Firefox, Firefox can also use DirectShow to play MP3s natively in the browser. This added support for Windows XP handle the MPEG encoded media. So you will also need to disable this, too. I'll add that as step 4:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste media and make a pause so that the list is filtered

  (3) double-click on media.windows - media - foundation.enabled to change its value from true to false.

  (4) double click on media.directshow.enabled to change its value from true to false.

• Satellite U405D-S2874: Question on the potential problem of hard disk

  Trying to fix a Satellite U405D-S2874 for a friend.
  As a first step, that it won't turn. Once I have re-seated hard drive, it turned on and starts very well.

  However, he still intermittently will not be powered from a power off State. I get a few indicators as power, load, etc., but at least I see Satellite logo light up, I know that it won't start/turn on fully and I get nothing on the screen.

  What is a problem with the hard drive, or the connection of drive hard, or...? I was wondering if we buy a new hard drive online, that will fix the problem.

  Thank you
  John

  > What is a problem with the hard drive, or the connection of drive hard, or...? I was wondering if we buy a new hard drive online, that will fix the problem

  I put t think that this problem could be linked to the defective HARD drive.
  Usually, the laptop must be able to turn on and the BIOS splash screen should be visible even if the HARD disk is defective.

  Moreover in most cases a message or underscore flashing appears on the screen if the HARD drive is malfunctioning

  However, it is possible to check the status of the HARD drive.
  Download the tool called Drive Fitness Test and test the HARD drive by using this software.
  If some errors would be detected, then you must replace the HARD drive.

  But if the HARD drive is ok, then I would recommend checking the RAM modules first.
  Test the laptop with a test module. Try the two slots.

  If it would not help you, then a motherboard must be verified but generally it is a work of a technician for laptop

• Satellite L350-17Z: Question recovery disc creation - problem with calibration

  I'm eager to get win xp instead of vista current on Satellite L350-17Z because some soft is not stable and vulnerabilities, while under xp on the desktop computer, I had no problem. XP compatibility mode is not solve this problem.

  So I decided to do it in a cruel manner as a laptop is new and almost empty, not to mention the habit of hard drive xp. Still I tried to make a recovery, using TOSHIBA Recovery Disc Creator.

  Buta * during DVD burning there is a fault and message about some problems with the calibration. I tried a few discs - same result.

  Hi Snen,

  It would be interesting to know what CD/DVD drive you have. Maybe you should try to update the firmware of the drive. For some readers of Toshiba and Pioneer, the site shows an update of the firmware. It s worth a try!
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  And what kind of DVD that you use to create a recovery disk? I have good experience with the types of DVD - R and I use Verbatim.