M60-176: Question about a display problem.

Similar Questions

• Question about fast display drivers and fixes

  Hello. I own a Toshiba Satellite A50-111 and I have two questions:

  1. the current version of the display on the site Web of Toshiba driver is 6.14.10.3722. However, on Intel version site Web 6.14.10.4277 is available (for Intel® 82852/82855 Graphics Controller). It is recommended to install the latest version of the manufacturer or of the most recent Toshiba Web site. I ask this because I believe some problems I'm coming with my laptop since the display driver (I currently installed the Toshiba one)

  2. in the drivers section, there are a number of quick fixes from Microsoft. My system is up to date in terms of patches from Microsoft. Should I install all these miracles?

  Thank you.

  Hello

  It is recommended to use the Toshiba driver because the drivers you can download from the Toshiba site are tested. You can install the driver provided by the producer of the graphics card, but there is no guarantee that it will work properly. You can try it. You may be lucky and it will work without any problem.

  If your system is up to date there is no need to install all the miraculous solution to all.

• Question about the display of the metadata of jpeg in lightroom

  Hello

  I briefly crossed the material of the SDK, but there are some aspects remaining unclear for me. More in detail, I would like to show the tag RegionName jpg file in LR metadata for research etc. This tag contains the Picasa face recognition data. I have already experienced the exiftool and how to add names to RegionName to the subject or keywords Tags in jpg-file and corresponding .xmp file to the raw file. However, I would like to find an elegant solution by showing the tag in the LR directly. Before you try to do the LUA code, I want to understand a few basic principles behind the plugin programming namely:

  (1) how to read the label RegionName since the jpg file and in what part of the plug-in? Is there a way to make LR read whenever "metadata file reading" is used?

  (2) how "publish" it displayed in the metadata Panel on the right side of the LR (this is handled a bit in the examples, even if I don't understand the reference to the com.adobe.xxx know what structure is really referring to?)

  Comments and help is welcome on this page or any advice where to find information!

  Mikko

  Mikko,

  LR provides access only to certain fields of metadata, not all.  RegionName is not one of the fields that LR is known, then you will not be able to use metadata methods of the SDK to access or display it.  In general, plugins that want to access this type of metadata to run the free Exiftool on the images and then analyze the output of Exiftool.

  The ExifMeta plugin exposes all the metadata that is accessible by Exiftool as custom in LR metadata fields.  I suggest you to try this plugin see if it meets your needs.  If it isn't, you can examine its source code as an example of how to use Exiftool to access and view metadata.  Plugin author Rob Cole is a contributor of this forum and quite willing to answer the questions.

• Question about interactive display

  I do an interactive display for the school and it includes 2 games and 5 movies.  I have everything set up as I want, but I have a HUGE problem, my movies will not play!  I use 2 different codes, one for the games and the other for movies, they are below:

  Games Code: loadMovie ("filename.swf", 1);

  The animation code: container.loadMovie ("filename.swf");

  The animation code has worked before, but for some reason any that it does not work now!  If there will have another code for downloading movies and .swf games let me know!  These are all transferred and I am thanks to navigate via the keys and those who seem to work great!  Another thing, I fixed it to 2 images per second, but some things stand out because it goes too fast, but if I have the slower games do not work.  Can someone help me with this one please?  Thanks in advance!

  -Jenni_Girl97

  If you want to load into a level, use loadMovieNum:

  loadMovieNum("filename.swf",1);

  If this fails, you have a path of access and/or incorrect file name.

  If container.loadMovie ("filename.swf") fails, you have a path of access and/or incorrect file name or a target movieclip incorrect (container).  or it can work, and you don't realize it because of the properties of the container.

  to obtain more accurate, you need to copy and paste the corresponding code.

• Re: Question about the display driver for Satellite L850

  So, I bought a Satellite L850 as twe weeks and I am yet to know which driver do I need.
  I mean, it's better is one that comes with Windows Update or do I need to download it myself? I can watch videos and play games pretty decently while I don't mind so far.

  > I mean, it's better is one that comes with Windows Update or do I need to download it myself?

  The Toshiba driver page driver is usually the right one. Updated the and designed for the use of the laptop.
  But if don t have problems even while playing the game, don t change. You know: never change a system running ;)

• Hi all. Newbie here. Very good site! Question about cd/dvd problem.

  Updated to win 10 to win 7pro. In Device Manager, it indicates a problem. (Dell Latitude E6420). My Manager of the cd/dvd device open device and reads "hl-dt-st dvd rom dv30n. I guess I am missing a driver. Any ideas? Anyone knows that it is?

  Plan to reinstall win 7. Your model is not approved for the upgrade by Dell and may not have suitable win 10 drivers. Wait to get the win 10 on a new computer.

  You can try the Device Manager, right-click on the cd player, update driver to let windows find a driver win 10.

• Question about the display of what log file mapped in LogFilter agent

  Hello

  LogFilter agent allows you to have up to 4 different log files (and paths) to match strings in the list.

  Is there a way to make a rule that kicks in when there is a match of logFilter - to have access to what filepath had the match?

  So, for example if I have;

  /path1/server.log

  /path3/server.log

  and if the rule that fires when the logFilter has a match, I would like it to show which of the 2 filepaths contained the game.

  Thank you

  "mark".

  Hi Mark,

  The default LogFilter rule creates an alarm that contains the path to the log file of the execution of the variable of severity level "text".

  This script uses "entry.get("LogName")" to extract the name of the log file, which is displayed in the Message field of alarm and the alarm dialog box as well as the text that triggered the alarm:

  

  Kind regards

  Brian Wheeldon

• Question about the display of an image between the columns in a report

  Hi people,
  
  I looked at the examples I have come across, but I guess I'm missing something. I have a PL/SQL procedure that returns a sql statement to a report. I want to display an image between the two columns. I already have the pictures stored in the APEX. Can someone please tell me what I'm doing wrong here?
  
  SELECT the id INTO file_id OF APEX_APPLICATION_FILES
  WHERE filename = 'Blue Free';
  
  q: = "select";
  q : = q || ' current_status_cd,';
  q : = q || "APEX_UTIL. GET_FILE(p_file_id => file_id,p_mime_type => ''image/jpeg'',p_inline => ''YES'') M,';
  q : = q || "UserID,';
  q : = q || "usernum,';
  q : = q || "LastName,';
  q : = q || "First name";
  q : = q || "from une_table";
  
  Return to q;
  
  Thank you very much
  
  -Adam
  
  Published by: avonnieda on November 11, 2008 12:28

  Adam:

  The references of the generated query "une_table." Is this a valid table in the application schema analysis?
  If so, change the query to be

  q: = "select";
  q : = q || ' current_status_cd,';
  q : = q ||'' ' "image,';
  q : = q || "UserID,';
  q : = q || "usernum,';
  q : = q || "LastName,';
  q : = q || "First name";
  q : = q || "from une_table";

  CITY

• Question about Toshiba displays LTM12C318

  I don't have an other laptop manufacturers with a piece of screen Toshiba: LTM12C318

  Anyone know if this screen is placed in any computers laptop toshiba as mine is broken and I need a replacement

  Thank you

  Hello

  AFAIK this view was delivered with a Tecra 8000 (PAT80XE) and the size of the screen is 12.1
  You will find more details:
  http://www.screentekinc.com/Toshiba-LTM12C318.html

• Question about CS2. Problem

  When my system crashed I had to upgrade Windows XP Pro to Windows 7.  Try reinstalling I found that CS2 is no longer supported.  After I jumped through the necessary hoops, I could reinstall CS2.  It worked OK for a while, but now I find that nested in the Toolbox tools are not available.  Any suggestions on what to do?

  When you say the nested tools are not available, you want to say that if you left click and you hold on the icons in the box to tools that

  have nested tools, indicated by the small black triangle, you do not get a pop-up menu showing the tools?

  They do not work if right click on the icons in the box tools?

  Are you able to switch using SHIFT + B for tools the tools example nested with the Brush tool?

  Have you tried to reset photoshop cs2 preferences, as described in the post linked below?

  http://forums.Adobe.com/thread/375776?TSTART=0

• Another question about the display of out parameters

  I put a ref cursor in my procedure and used variable bind. If I trace through the procedure using the debugger in sql navigator I see the variable values of the print output, but they still have empty values. What should I do to show them now. It's my current procedure:
  
  PROCEDURE Retrieve_Item_And_MeasureUOM
  (
  -parameters passed in
  p_wr_item_oid in NUMBERS
  p_wr_measure_oid in NUMBERS
  p_measure_uom OUT VARCHAR2,
  p_report_item_measure_uom OUT VARCHAR2,
  p_report_ref1 ON ref_cur
  )
  
  As
  -local variables
  v_sql1 varchar2 (500): = ";
  v_report_name varchar2 (200): = "reportname";
  v_wr_item_oid NUMBER;
  v_measure_oid NUMBER;
  v_report_item_measure_uom VARCHAR2 (50);
  v_measure_uom VARCHAR2 (50);
  
  
  BEGIN
  
  v_sql1: =.
  "SELECT."
  FM.wr_item_oid, fm.wr_measure_oid, fm.default_display_uom as Report_Item_Measure_UOM,
  m.Default_UOM_App_Code as Measure_UOM
  
  Of
  wr_form_measure fm
  JOIN IN-HOUSE
  m wr_measure ON m.wr_measure_oid = fm.wr_measure_oid
  WHERE
  FM.wr_item_oid =: itemoid and fm.wr_measure_oid =: measure_oid AND
  FM.wr_form_oid =' | Retrieve_FormOID_From_Name (v_report_name);
  
  
  PUT_LONG_LINE (v_sql1);
  
  P_report_ref1 OPEN for v_sql1
  With the HELP of p_wr_item_oid, p_wr_measure_oid;
  
  
  EXCEPTION
  
  WHEN NO_DATA_FOUND THEN
  RAISE_APPLICATION_ERROR (-20999, "no data found. Possible error in the form OID.') ;
  
  END Retrieve_Item_And_MeasureUOM;
  
  
  
  Thanks again

  Since you ask again I'll answer again. I have replyied to your other post that is answered.

  CREATE OR REPLACE PROCEDURE retrieve_item_and_measureuom ( -- parameters passed in
                                          p_wr_item_oid             IN     NUMBER,
                                          p_wr_measure_oid          IN     NUMBER,
                                          p_measure_uom                OUT VARCHAR2,
                                          p_report_item_measure_uom    OUT VARCHAR2
                                         )
  AS
    -- local variables
    v_wr_item_oid             NUMBER;
    v_measure_oid             NUMBER;
  BEGIN
    SELECT fm.wr_item_oid,
           fm.wr_measure_oid,
           fm.default_display_uom AS report_item_measure_uom,
           m.default_uom_app_code AS measure_uom
    INTO   v_wr_item_oid,
           v_measure_oid,
           p_report_item_measure_uom,
           p_measure_uom
    FROM     wr_form_measure fm
           INNER JOIN
             wr_measure m
           ON m.wr_measure_oid = fm.wr_measure_oid
    WHERE      fm.wr_item_oid = p_wr_item_oid
           AND fm.wr_measure_oid = p_wr_measure_oid
           AND fm.wr_form_oid = retrieve_formoid_from_name (v_report_name);
  EXCEPTION
    WHEN NO_DATA_FOUND
    THEN
      raise_application_error (-20999,
                               'No data found. Possible error in Form OID.'
                              );
    WHEN OTHERS
    THEN
       raise_application_error (-20998,
                               SQLERRM
                              );
  END retrieve_item_and_measureuom;
  

  Published by: Marcus AFS on February 24, 2010 15:16

• W2338H display problems

  Just bought a HPW2338H monitor and have a few questions about the display. When I I select "fill the screen" under the custom menu of scaling, the display indeed occupy the screen, but everything is "tense", i.e. a round object is now oval, stretched horizontally.  When I select "fill aspect ratio", things are stretched, but there are black areas about 1 1/4 "wide on each side of the screen.  What is the advantage of having the extra screen wide if she to deform the images to use?  And when I play a big movie screen, he still has empty spaces side and above the HUGE blank areas and bottom.  I have a Sceptre 22 "widescreen and it has none of these problems, the movie fills the screen side by side and white areas up and down are much smaller.  It seems to me to pay for a large number of real estate that I can't use.  Your help in this matter will be appreciated, faster the better because as it is now this thing will return the storel.

  Hello

  You have set the resolution 1920 x 1080 (product card: http://support.hp.com/us-en/document/c01604006)

  ?

• About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  Hi Michael,

  If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

  One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

  

  Content

  To manage this content, you are currently subscribed and changing your preferences, select the content.

  Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

  You can select to terminate a subscription to a thread.

  

  Learn how to manage your subscriptions

  Take care.

• Graphics/display problem - Satellite M60-105

  I'm having a little problem with the display (or graphics). In some programs of CAD (Inventor, Solid Works) 3D solids are displayed with lines that normally are not displayed. "I see the solid. In the games like Doom3, I see only a chequer (Exchequer) with black, the blind, the tasks of rectangle. I tried to update the graphics driver, but the results were the same. Problem is more complex that I have thaught, because I noticed the same problem after formatting HD and mounting of Toshiba Recovery CD. Also, I noticed the same thing happens when I'm trying to change something in the BIOS. Maby some of you have had a problem like this, please help.

  Hello

  Believe me on this path is not easy to say what may be the problem. The explanation of your problem is good, but it will be interesting to see what you mean exactly.

  One of my friends has M60 and I didn't see any display problem on his unit. If the unit is installed with recovery media that produced with other applications, watch DVDs or simply with 3D CAD program?

  It will also be interesting to know what you exactly changed in the BIOS.

• The satellite M60 display problems

  Hello

  I bought a satellite M60 a month ago, and since then, I've been strugling trying to solve a problem that has to do with the display (ATI 700 X mobility).
  When I play some games (the dawn of war, Unreal tournament...) the computer freezes completely, I actually have to force stop it to restart.
  Another problem, that I have seen is with Mixmeister Pro 6, the video playback is erratic, it is as if the computer is unable to handle any overload.

  I tried the upgrade of drivers, nothing works, then I installed the third party Omega drivers, but once again, nothing to do.

  Since the purchase of the M60, I had to correct problems of Wirless and PCMCIA card through driver updates, but there is nothing that I'm be able to do to resolve this display problem.

  I am quite convinced it's a driver issue, but then again, nothing is certain.

  If anyone can help me please I'm getting desperate.

  Hello

  Well, it's not easy to say why it happens but one of my friends has sometimes even appearance but on another unit. If he plays a high-performance games unity cling.
  In my view, this could be a heating problem. Playing games is hard work for the laptop, because all parts (bars of memory, processor, graphics card, etc.) work with max performance and produce a lot of heat. Most laptops are not developed for this.

  However, you should always use the graphics driver from Toshiba. I found the latest version of 15/07/05. It is a display 8.121.050.322A driver. In addition, you must install latest DirectX. I think that it s a 9.1. Check whether the fixes for these games are available.

  Second, if video playback is erratic, it seems that the OS is fully committed.
  In this case, you should check the processes that run in the background of the operating system.
  In addition, try to defragment the HARD disk

  Good bye