Satellite L350-17Z: Question recovery disc creation - problem with calibration

Similar Questions

• Recovery disc creation

  I have HP Pavilion dv5-1010et Entertainment Notebook PC. I entered Recovery Manager, you click on advanced, then selected Options create recovery disks and then press Next. Recovery Manager does not invite me to insert a blank CD, instead a dialog box appears with a red cross on the left saying "recovery disk was created. There is no CD or DVD inserted first Virgin. How to fix this problem? That hurt that I could not create recovery discs? I would appreciate help with this problem.

  @lauriej

  I'm sorry that you run also in this issue of recovery disc creation. You can also contact HP Technical Support at the 800.474.6836 to let them know that you have a problem, create the discs. As in the case of the CW4ZNS, the retailer may have created the disk but failed to give them.

  You can also create your own disc of Windows 8, however. Perhaps this is a faster option for you.

  Download the ISO of Windows 8 64-bit here

  ImgBurnto burn the ISO to a disc.

  If you need to use the drive, you will have to put the disc in, reboot and press F9 to the power of. Select your CD drive and start the installation. It will ask you the product key, and you can find that on the label of Microsft on the sides or the back of your computer. Once installation is complete, you will need to go to Your HP driver Page to download your drivers and software.

  I hope this helps! Let me know if you have any questions on this

• Pavilion dv6: recovery disc creation-help

  Hi all! I've a questione.and I hope that someone can help me. I would create a creation of... hp recovery disk recovery disk but when it gets in the first screen "Welcome to the recovery disc creation and I click on 'next'... and a call to error window with the Message that there is no free space in the partition of sistem.» But in the score system is only recovery... that ' s the solution for creatina a recovery disk? Thanks for the reply.

  Hey @Alessia_to,

  Before I provide documentation of troubleshooting, I would like to take a few minutes to welcome you to the community of Support HP, where you can ask questions, find solutions and get help from others in the community! I read your post and see that you need help creating recovery disks.

  Here is a document for you to read called create recovery discs or record a recovery Image on a USB Flash drive. I pulled some information in the document for you. The first thing that I would like to share with is only DVD-R, DVD-R DL, DVD + R or DVD + R DL disks are compatible with the design of recovery media program. The next disk types are not compatible with the design of recovery media program:

  • CDs

• Satellite L350-17Z PSLD8E-0J5032RU same as 0J500GG3

  On the support page not found the model:
  Satellite L350-17Z
  ???? ????? : PSLD8E-* 0J5032RU *.

  But the model:
  Satellite L350-17Z
  ???? ????? : PSLD8E-* 0J500GG3 *.

  It's the same thing?

  Hello

  Yes, both belong to the same series.
  But the PSLD8E-0J5032RU seems to be released only in Russia and PSLD8E-0J500GG3 has been published in other countries such as the Netherlands and the Germany.

• Satellite L350 - Question about recovery disc creation

  Help, please.

  I read in the manual for my new lap top before setting up and feel rather nervous.

  The seller said that he had to open automatically when I start it, and all I had to do to install the printer and my word m/s (for example) program and I would be in place and running.

  But it seems that I should first do some recovery disks.
  How many disks is necessary? DVD no doubt - or D/L.?
  The recovery discs are possible after other programs installed?

  Secondly, he mentioned the manual online. Where can I find it?
  I have a scanner and a Seagate external hard drive, but these can be added later.
  I use the laptop as a desktop replacement for my old Mesh PC of five years.

  Thank you for your help.

  Hello

  Yes, it is very important to create the recovery disk before you change anything on your HARD drive laptops.
  When you have completed the installation of Vista, you must start the application called recovery Toshiba disc Creator.
  This application will help you create the recovery disk.

  As I m not wrong not you would need a DVD. I recommend using a DVD-R.

  Notes; in some cases, you might get an error burning the recovery DVDs. This may happen because not all drives are fully compatible. So if you get this error please check different DVD from different manufacturers

  Good bye

• Satellite A505-S6005: creating recovery discs power calibration error

  Hello

  just bought a satellite A505-S6005 and try to create recovery discs.
  I am using Dynex DVD - R.

  He created the 1st disk after the slightest mistake 2 times and when I started the 2nd drive continued to get again the message that is OE01BS-26 error Code - 2 said A 037303 power calibration area error occurred, check the disk for dirt or scratches.

  The disks are not scratched, and after going through 5-6 discs wonder if something is wrong with the optical drive & not the disks.

  Any help appreciated.
  Thank you.

  Hello

  I think it's a problem with your DVD media
  You are using incompatible disks!

  Try different DVD from different manufacturers.
  I m using the Verbatim or TDK DVD-R and my CD/DVD drive handles these discs without problem.

  Check it! I'm sure this will help you!

• Satellite advertising L870 3 recovery discs - do not have

  Hi all

  Apparently, someone can tell me how to get the recovery disks when I bought my laptop it says make recovery discs I did but he only made 2 and now requires a third drive...

  It came with win 8 installed and do not know if it is because of the accident

  Satellite L870-18 t

  Thanks in advance

  Rod.

  Looks like something went wrong during the creation of the recovery disc.
  Don't know why, but if you want to get a recovery disk, you can do so here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite P200: Creator of recovery disc - error code: 0E01B5-26-2A030C00

  Hello

  I am trying to create the recovery disc for my new Sat P200 and it gets 1/3 of the way (1/2 way through the first disc) and displays an error message:

  "The question has occurred during the recording of the data on the disk. The current process will be stopped.

  An error occurred during the registration phase. Please check if the disc is scratched or dirty. If so, please try again with a new disc.

  (Error code: 0E01B5-26-2A030C00) »

  I tried twice on nine discs Verbatim DVD + R.

  Any suggestions as to what causes this problem?

  See you soon
  sophiajs

  I recommend you test different DVD media.
  Try DVD-R and from different manufacturers.

  From my own experience, not all CD and DVD is cared for and compatible.

  Greetings

• Laptop HP 15-f162dx: THEIR is NO OPTION of DVD FOR DVD RECOVERY DISC CREATION IN the HP RECOVERY MANAGER'S

  I HAVE HP 15-f162dx NOTEBOOK PC in WHICH I AM creating RECOVERY DVD DISCS IN "HP RECOVERY MANAGER", BUT in THE "HP - CREATE RECOVERY MEDIA" IS NO OPTION TO CREATE a DVD. EARLY CLAIM.

  CONCERNING

  Ok.

  I don't see that as a real issue or problem.  The ability to create a recovery media is part of the purchase, and you do not have the ability to create a recovery media.

  Why don't you use the option of USB flash drive?

  The USB stick recovery is higher on the recovery DVD disc in a number of ways.

  (1) a usb flash drive are not damaged by just scratching the surface, unlike the DVD in a set of recovery disks. A scratch on the side of disc label #1 and the whole is unusable.

  (2) a recovery, when from a usb flash drive takes less than an hour, so that once made with one set of recovery disks can take up to four hours.

  (3) not all DVD media can be used to create a reliable recovery DVD media.

  (4) DVD media can be easily destroyed by heat, if you live in a region of the world where the temperature is normally high.

  (5) usb recovery media creation takes less than an hour, compared to the time it would take to make a recovery of the DVD disc.

• Satellite A300 - displays error recovery disc creator

  Hello

  I have a Toshiba Satellite A300 (PSAGCE) and I created the recovery by using the "TOSHIBA Recovery Disc Creator' disc but I did this a few months ago, but now the disc is scratched, and when I am formatting my computer it gives me an error when loading files. So I decided to create another disc, using the "TOSHIBA Recovery Disc Creator', but she also give me an error with one of the files during the creation of the disc. What should I do now?

  I have a friend who has a Satellite A200, can I use the disk? I did a printscrean showing the error. Sorry the bad English, I'm Portuguese...
  [http://img199.imageshack.us/img199/4030/semttulovj.jpg |]

  Hello

  It is good that you posted a screenshot of the error, but perhaps you can translate it into English, it would be more useful.

  In any case, the disks that you use to create the recovery disk? I m using Verbatim DVD-R media. It worked perfectly for me and I can recommend this path.

  In addition, you can see the Toshiba page for an update of the firmware of your CD/DVD drive.

  Finally and above all, I doubt that for Satellite A200 recovery disk will work for you also. The models are different

• Satellite L500D PSLK0A Toshiba Recovery Disc Creator does not work properly

  Hello

  I am trying to create a recovery for my Toshiba Satellite L500D PSLK0A-00U009 disc.
  When I run the Recovery Disc Creator he starts to open then it comes up with a box with an exclamation point, he says: 'cannot open target partition. Then the recovery disc creator will open. It seems normal, then when I insert a CD for the process seems to work then it says error and stop and ejects the CD, the error is that the code is: 0E01B5-26-510444 D 9

  I already uninstalled and then program then reinstalled with the help of a download from the Web MyToshiba site and this has not fixed the problem.

  Any suggestions?

  Hello

  Have you tried different discs from different manufacturers?
  How about you, USB flash memory usage? AFAIK, you can create a bootable Recovery USB flash stick too.

• Satellite L500-12 q Recovery Disc Creator Error

  Hello

  I have a laptop Satellite L500-12 q. I used the Recovery Disc Creator to make recovery disks. It needs 4 discs. The 1st was writtenk ok, but on the second, towards the end of the current status, it stopped advancing. It's almost an hour, and it is still not finished. I'm on the second try. The disc is spinning and the drive makes noise as if it was written, but it does not advance at all.

  Please, could you help me?

  Thank you
  Claudiu

  Claudiu Hey,.

  What kind of DVD that you use to create the Toshiba recovery disks? I got also some problems to create a recovery disc but I changed DVD + R, DVD-r media and everything was ok! I used Verbatim discs to create because I have really good experience with this kind of discs. In addition, it seems that TDK discs also work quite well. Check this box!

  If it doesn't work check the Toshiba page for an update of the firmware of your WEIRD!

• Satellite L350-144 - second recovery disk

  Y at - there someone who can tell me why I had two recovery disks?

  On disk, it is my Vista recovery with all the drivers, after the installation of the system do not ask the second disc. Everything works fine.

  I just want to know where the second disc is for. It s a Satellite L350-144

  I think that on the other recovery disk there are some applications or other OS (operating system).

  Very simple: insert the CD and look at what is on it.

  Tell me what do you see on the CD, I'm interested in.

• Re: Satellite A300 - error creating recovery disc

  I'm not really providing any solution, but is facing a similar problem with my laptop Satellite A300-1EI, bought in Dubai, UNITED Arab Emirates. I tried to make records of recovery through Toshiba Recovery Disc Creator. However, each time, I got an error message. I tried with Verbatim, Philips DVD-R and lost several DVDs. Meanwhile on the net surfing, I discovered that the engraver of DVD from Toshiba is a little sensitive and try to use Verbatim DVD - R brand. I tried with Verbatim 2 days and at the last moment when I was about to dance with joy that the first DVD is created, received an error like below

  * "The following issue occurred during the recording of the data of the disc.*
  Current process will be stopped.*

  * A power calibration area error occurred.*
  * Please check if the disc is scratched or dirty.*
  * If Yes, please try again with a new disc.*

  "* (Error code: 0E01B5-26-00037304)."

  I don't really understand the message. Can advise you on how to create the recovery disks.

  Kind regards
  Vijay

  Hello

  To me, it seems that the used DVD discs are not completely supported by ODD.
  It seems to be a compatibility issue.

  I had this problem in the past, but I could resolve it using another DVD from another manufacturer.
  I had a good experience with TDK DVD-R.
  Using the R disk I was able to burn the disc, but using the + R I received an error message.

  See you soon

• Recovery discs creating problem

  Hello

  I just bought a Lenovo 3000 N500 3 DG and I have this problem when I try to create the recovery disks:

  I do double click on unity of q, and the system then asks me if I want to do the recovery disks. Then I click 'Yes' and the system creates a first disc succesfully (labeled "disc 1 product thinkvantage recovery"), but then I inserted a DVD to make the second disc and when the system is it creates about 80-90%, an error occurs and the process is interrupted. This error occurs whenever I try to create the second DVD, exactly at the same point in the creative process. I tried a few types of DVD and none of them works.

  I think this may be due to a failure of the windows vista software, recording, because when I burn a DVD with Nero everything is Ok and when I try to burn a CD with windows, that an error occurs at the end of the process of the. Could someone tell me how to do the recovery discs?

  I also have a second question: the laptop comes with windows vista Home premium pre-installed, and I want to downgrade to XP Professional. Does anyone know if the warranty expires during a downgrade? And if I decide to do the downgrade, then I remove the three partitions (C:, q and S or the S: partittion is necessary for recovering the system?)

  Thank you!

  Please take a look at the solution in this post to see if that helps your situation. To let us know.

  If you upgrade to XP is not invalidated your warranty, the warranty covers the hardware and not software.

  If you create recovery discs for your Vista installation, you can delete all partitions, recovery CD will be recreated them when you use them.

  Hope this helps

  Edit; I forgot the link