HDD 1 error (301)

Similar Questions

• Pavilion 15n028US: SMART HDD 1 error 301 w / new HD and SATA

  I have a SMART disk error that detects imminent failure. On trying to continue the start up, I got "Windows was able to start" from the Boot Manager (leader: \BCD status: 0xc0000034). A quick hard drive scan confirmed a bad drive.

  I bought and installed a new drive. Same mistake. Win 8 installation attempt, boot in it. BIOS has confirmed the presence of a player, but gives no specifications.

  Tested by car on another laptop. Has worked very well, even starting in the Win8 who had installed on my HP diagnostic check. past.

  Bought a new SATA for my laptop even model. Same mistake.

  What could be the problem? My guess is the drive of the mother at this point. Is there anything else left to try?

  Hi @Figaroatl,

  Welcome to the HP Forums!

  This is a fantastic site to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that you receive a hard drive error 301 and that you have purchased and installed a new hard drive.  It is recognized in the bios, but it also gave the same error.  You have attempted to install Windows, but can't.

  You have removed the new drive and installed in another computer and it tested very well and you could install Windows on it and start on this drive.

  You have replaced the SATA cable and installed in your laptop, but there was no change.

  You are right at this point, I suspect that it is the motherboard... I would test the motherboard by using the UEFI.  Under the component option you will see the systemboard, select it.

  HP Notebook PC - detection of hardware failures (Windows, 10, 8)

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

  Good luck!

• laptop hard drive failure error 301 on my device

  a few descryption

  . device name - hp pavilion g61200 do you

  . the problem in the hard disk it displays SMART drive failure error (301)

  HP PAVILION DO YOU G61200 & O/S WINDOWS 7 ULTIMATE

  I want to know, what is the ERROR DISK HARD SMART 301

  with in a few days I am facing this problem in my device

  so, what can I do for this problem...

  Please tell me

  Hello

  Do a hard reset first.
  http://support.HP.com/us-en/document/c01684768

  The SMART drive test produces a prediction on the risk of hard drive failure, not a real failure.

  A warning to SMART disk error can appear for various reasons such as having been jarred abruptly computer or hard drive, be subject to the higher than usual temperature.

  Perform HP hard drive - wide test of the system BIOS Diagnostics shortly after switching on, tapping F10/F2

  If there are any Smart player or hard failure error you see, Hard Drive is a failure and the solution is to replace the drive.

  It would also be very wise to make sure that you back up all your files etc as soon as possible.

  Thank you

• HP G62-b23SA - hard drive failure imminent - SMART error (301)

  My HP G62-b23SA signals an imminent hard drive failure. Drive hard test reports a SMART error (301).  You should back up the system and contact the HP support to inquire if the hard drive needs to be replaced or just needs to be repaired. I have supported from the system, it had to be replaced?

  Hello

  The Smart 301 error would indicate that your hard drive is defective and must be replaced.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.  You can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know - include size (IE 500 Gb) of your current HARD drive.

  Kind regards

  DP - K

• Vostro 460 HDD fatal error of statement

  my Dell Vostro 460 Mini-Tower began to detect a HDD fatal error. It's a 1 TB drive. Anyone know what that United States a replacement compatible Please?

  mshoneyrose

  my Dell Vostro 460 Mini-Tower began to detect a HDD fatal error. It's a 1 TB drive. Anyone know what that United States a replacement compatible Please?

  mshoneyrose

  Any SATA HDD 3.5 "internal 7200 rpm or compatible, my preference would be to install a Western Digital HD, other brands available hard drives are Seagate and Toshiba.

  Bev.

• Error (301,28): PL/SQL: ORA-00942: table or view does not exist

  Hi all

  11.2.0.3.10

  AIX6

  I was installing store_procedures on our PROD several times, and they are successful. This stored_procedures are created by developers and once tested on DEV & UAT, they are transferred to the PROD through me.

  But this time I install a new SP, but I got error > Error (301,28): PL/SQL: ORA-00942: table or view does not exist

  Even if the synonym. The owner of the schema of the SP has grant select on the table and synonym of created. Why not MS can see this synonym?

  Is there something that I missed?

  Help, please... I'm going crazy

  Thank you all,

  MK

  Since there is only one user in your role, so I'll suggest to directly grant you the user rather than role - it's the easiest and simplest account according to your needs. The roles are best used to organize all of the users. If ever it is necessary to use roles (i.e. multiple users/schemas in a role) then, I think, you can play with AUTHID clause creating blocks.

• Air App for Android - error 301: application descriptor missing

  Greetings!

  Have built in Flash for a while, I am brand new to mobile development.  I am currently creating my first app Android, a very simple game called '302 saves the Galaxy '. I don't intend to sell the game.  I'm really just trying to learn my way through the process of publishing for future projects.

  I was able to get to the last step in creating the apk file and I get this error in the command line process-

  "Error 301: Application descriptor missing/cannot be opened.

  Here is a screenshot of the window from command line-

  

  Here are some other details on my process-

  • In Flash, I chose to publish to Air 2.0, because it's the only option I had (IE, no Air 2.5 option)
  • I checked three times and all spellings seem to be correct in my command line syntax

  I don't know I'm missing something here obvoius.  Any suggestions?

  Thanks in advance!

  Joel

  Hi Joel,

  Command, xml application should precede the swf.

  -Pahup

• Turn on computer laptop give - HDD error 301

  Hey,.

  It was the last point of control for me with my problem.

  First of all, I want to say what is my problem:

  I'm every time hard drive 301 error when I open my computer. I will get error has occurred on the hard drive using windows.

  I checked for samsunghdd.com and there was some application called seatoolsDOS, just cannot run it because I can't access Option ahead of start. I asked what to do and meet a forum was the drive is dying and Im agreeing that too now.

  Well, my HARD drive is: Samsung 500 GB HM500JJ

  Windows 7 Home Premium operating system

  Laptop model: HP DV6 3050so

  Problem: disk 301

  IM wondering how long my hard drive can run? I have nothing to back up. I just want you get a resolution to this.

  If you want to know more just ask. I don't know I missed something so just ask

  Cordially Mika Marjomaa

  Hello

  This will not affect any other part of your unit. Just buy the same kind of car should work for you well.

• SMART disk error [301]

  Hello and thank you for helping me.

  I turned on my laptop HP [star wars edition], and it is reading the following on my screen:
  Disk SMART failure
  INTELLIGENT drive control has detected an imminent failure. So no loss of data, please backup the content immediately and run the System Diagnostics hard drive Test.
  Hard disk 1 [301]

  I tried the hard drive Test or the hard drive Test, but he says no HDD installed.

  I really need help. Please, I beg you!

  Hello

  The error seems to indicate the hard drive is failing and must be replaced.

  As your laptop is still under warranty, contact HP and arrange for the disk replaced - if necessary, you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• SMART hard disk error (301)

  I WANT m6-1120sw my friend. When I turn it on it shows SMART drive hard error, said diagnosis: "SMART Check: NOT AVAILABLE, short DST: caution. His old HDD, I replaced it with a new one, but nothing has changed. -What would be a problem with the SATA controller on the motherboard or is it something different?

  Hello
  
  Smart disk error indicates failure of hard drive. You still get any ID failure?
  
  Since you have already replaced it & not showing is not available, the probability is for the connection by defective SATA cable or SATA controllers or motherboard itself.
  What of all the other disk hard test - wide?
  
  Try HD Tune Pro software currently running on the system.
  
  You may have to contact HP for repair.
  
  Thank you

• Code error-301 when you deploy the image

  Hello
  I have a problem.

  I want to deploy an image from a client light t5740e to a client t610.

  I cloned successfully of the image to a folder as a file .ibr deposit.
  I also have an older version of the image as a file on a FTP repository .img.

  I can successfully deploy the image the FTP repository to a t610 client.
  The problem is that this image is obsolete and cannot be used.

  When tryng to deploy the image to a file repository shared, I get the following error code:
  2013-04-22 11:38:47 ErrorCode:-301, error information: the device of the faimly bios is not match the image.

  I also tried to create an image using HP ThinState Capture, but recevie the following error during startup:

  Inititializing... * ERROR * system has failed the OS image.

  After that, I downloaded the standard image on the HP site and created a USB key. Then I replaced the .ibr file, but it still gives me the same error as ThinState installation.

  Is there a way to bypass the repository of shared folder and clone the image to the FTP repository under a .img file and deploy it to the client t610?

  Or is it possible to bypass the BIOS checking when deploying the repository of shared folder?

  Assuming that the version HPDM is common (4.5 with SP2), there is an option in the task editor when applying the deployment to enable Cross-platform for Imaging.

  This is however strongly discouraged because the picture you shot of the t5470e will not have the necessary drivers for the t610. The original image on the web site of HP will have drivers for both, but the part of the RunOnce scripts at first start after imaging USB is clean the unnecessary drivers by the platform to maximize space on the device.

  However, you should be able to pull the image of 7th WES using the FTP browser component in menu HPDM model. This will generate a model that can be deployed to clients light t5740e both t610.

  One last thing to remember is to make sure that the agent is updated on the device target before deployment and then again after the deployment.

• G2F98PA #UUF: I have a HP Pavilion x 360 - Smart hard disk error 301 convertible.

  

  You must back up all important data and replace the hard drive.

  S.M.A.R.T.

  You can run a HDD diagnosis to confirm the hard disk error.

  Test of hardware failure

  You can check if your system is still under warranty with the link below.

  Check the warranty

  If you found my answer helpful please say thank you by clicking the s cursor Up icon. Thank you!

• Satellite Pro A10 - no answer - enter HDD #0 error

  Pro warranty A10, student daughter portable computer reports no longer works, already suspended and finally no response from any other lights at the entrance to DC charger is connected.

  Clean fan/radiator, a lot of lint etc. removed. No obvious signs to know why the Board me dead however. Confirmed with counters that this DC of the shipper in me Board. Ordered A replacement me Board, FHZSY1, eBay and equipped, taking the precautions of static, but can not confirm that they were done by the seller.
  Now, new Board of Directors recognizes the input DC and recharged the battery OK. Tried to turn on the laptop but terrible mistake INPUT #0. Concluded that the HARD drive had also been damaged. New (Toshiba box) arrived two days later but gave the same error when mounted. BIOS won't recognize HARD at all. Tried all the messages on the verification of the connections and certainly not of mounted riders. Laptop will continue to start from a system CD, as it may then think the new me Board is OK

  Are the HARD drive of the Satellite Pro A10 different from those on the A10 satellite earlier?
  Any other ideas on this INPUT #0 error?
  Thank you

  Hello

  As much as I know there is no different hard disks and your use of the same laptop as most other Toshiba laptops. I can just write that this error is certainly resulting HARD disk problem. The HARD drive is obviously not identified by BIOS correctly.

  Sorry but I have no more info on this subject. By the way: is the motherboard new or used one?

• DCR-SR68 HDD Format Error Msg

  OPON power device reads a message on the video screen: ERROR of HARD disk FORMAT. At this point the device is rendered unusable. Is there a way to fix this? THX

  Hello RoyS,

  Welcome to users of Forums of Discussion.
  You can try to format the HARD drive and see if this could help you. Please see the instructions on page 67 of the DCR-SR68 manual.
  http://www.docs.Sony.com/release/DCRSR68_handbook.PDF
  NOTE: This will delete all data in the internal recording media. To avoid the loss of importance of the images/videos, you must save them before you format the HARD drive.

• HP HDX 18: Disk error 301 - how to determine which drive is phyiscal 1 as 2 drives are installed

  Hello

  The start-up of the PC, I get the message that "imminent disk failure.

  I passed all the tests and SMART's gives error 1720 SMART hard drive detects imminent failure

  It is on the main hard drive. containing drive C, D, E (recovery information

  However, there are 2 physical disks.

  Opening at the front of the PC next to me how what drive is the 1? The left or the right?

  Both drives are 60ZAT1-WD5000BEVT 500 GB each.

  Thanks for a quick response... .like I would replace the disk as soon as possible...

  Any recommended drive would be also appreciated...

  Thank you in advance...

  If you remove the disks, the berries are labeled inside. With the front of the laptop towards you, the primary drive is generally on the right and the secondary image on the left.