HDD MQ01ABF032 internal Toshiba clicking and death

Nice day
I use the HARD of MQ01ABF032 drive on my Dell E6330 laptop that was working finde until he started making scraping noises now
And then. A week later the scraping transformed by clicking sounds when I try BIOS internal Dell. It turned out that the HARD drive test discovered a problem with the HARD drive. Since then, I've had e/o errors and HARD drive is now not answer "no hard drive found" when starting
Drive HARD MFG 2014 is possible to return this drive for warranty?
Thanks for the help of marc

If it makes feel you better my dong is the same thing and ask myself the same question.

I talk about Toshiba and apparently that right 6-year warranty only applies to the store that you bought it from, and when you talk to them, they want that a report by an official known PC tech and that will cost you a little money.

Tags: Toshiba

Similar Questions

  • I have a Toshiba laptop and my touchpad does not work any idea on how to fix

    touchpad does not work on my laptop, it is a toshiba...

    Hello

    Some have keys that turns off the pad and many Toshiba have card keys which have a control.

    Control Panel - mouse - Touchpad is here

    Panel of configuration-device - mouse and pointing devices Manager - double click on info pilot.

    If no joy go to Toshiba Support and download the latest drivers for your version of Windows and 32 or 64-bit.

    Go here and put in your info model and search for the drivers for your system

    Download - SAVE - go to where you put them - click on - RUN AS ADMIN

    Toshiba support and drivers
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba Support Forums
    http://laptopforums.Toshiba.com/

    Contact Toshiba
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

    =========================================

    It's my generic how updates of appropriate driver: you mainly want to update or reinstall the touchpad drivers
    and ALSO to get the Toshiba value added Package for your version IF it is there.

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
    video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
    cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
    own the software and drivers and all other main drivers that you have.

    Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
    (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
    updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

    Always check in the Device Manager - tab drivers version you install actually shows up. This
    because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
    pilot - reboot - check that it is installed and repeat if necessary.

    Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • clicked and put Word program icon Microsoft Office to the desktop icon is lnk not Word icon

    Just got a new Toshiba laptop yesterday.  I installed Microsoft Office.  Because I tried a shortcut on the desktop for Word, I clicked and dragged it comes from the progrram file.  Now, we won't have the icon.  Instead of the traditional Microsoft Office 2010 'W', this is the icon of lnk.  Can someone suggest a solution to return to the image of the appropriate icon.  Note, the works of the icon.  It opens the program without problem

    Thank you very much!

    This should help with the problem of Word icon,

    Rebuild icon cache,

    http://www.SevenForums.com/tutorials/49819-icon-cache-rebuild.html

    Dragging back,

    Drag the desktop icon refurbished on top the Start button in the taskbar, (do not fall again)

    Then drag it on top of all programs listing, (do not fall yet)

    Drag it on file with the Agency, it must develop, (do not fall yet)

    When you move it to the bottom of the lists of programs of office one related Horizontal appears,

    When this line appears Drop.

  • I no longer have a "delete" key/tab on my page of e-mail, I have to right-click and delete items individually. Where at - it go? I would like to but it back!

    I changed probably inadvertently something, but now there is no function of deletion on my mail page, so I can't click just a little dot or s/t next to the messages I want to delete, I right click and delete the item individually. Thanks for your help.

    See photo

  • I use 33.0.1 firefox. When I googled I don't want a new tab to be opened, unless I have rt click and open. How can I change the settings?

    I use 33.0.1 firefox. When I googled I don't want a new tab to be opened, unless I have rt click and open.

    As I remember, I was not the case before. Could someone help me change the settings or how to open the link on the page in question itself rather open in a new tab?

    Thank you

    Hello, this is a google Executive that you can change to google.com/preferences.

  • Can't click and drag to select anything in the Apple Pages

    I worked for hours on this unanswered anywhere on the internet.

    I can't click and drag to select text in the Apple Pages. I can click and drag to select text in other applications on the same computer, but in the Pages, I can't click and drag. It will show the text highlight for a fraction of a second, and then it will disappear. I can't copy or cut, because it will not select it. If I select the text with clicking and then holding down the SHIFT key and then clicking on at the end of the text, he chooses for me. But clicking and slippery will only highlight, then disappear. What's wrong???

    I have

    • computer restarts
    • restarted apple pages
    • trashed plists iWork (cannot find a specific pages plist)
    • Troubleshoot-made form another computer by comparing the preferences, settings, all on the same version of Pages
    • sought objects to make them 'selectable' (there is no objects, and this happens on all documents, including new pages documents I just create and try to highlight a Word)

    I'm on an iMac OSx 10.11.5 end 2013

    Apple Pages 5.6.2 (2573)

    It is a long-standing problem in OS X, are not specifically in any version of the Pages. Have you tried clicking & holding it down for a second or two in the text before you drag?

  • After internal reset PRAM and SMC microphone still does not work properly

    I've recently updated to el capitan. For the first time that I had to use the microphone internal, so I went to the system preference, the maximum capacity, the value clapped my hands, but the microphone reacts just as shown on the scale bar. So I reset the SMC first then the LANDAU and now it reacts a little more because I clap my hands, I want to tell the scale bar that detects the incoming sound shows like 5 spots (and there are 15 points). I tried to register and the sound of the recording is very low. Is this normal? What I need to fix my mac (3.06 GHz Intel Core 2 Duo, 4 GB of DDR3 memory a 1067 MHz, GB 999,35-909, 89 GB free)? Thanks for any response.

    Susan of morro bay , October 28, 2014 16:21
    in reply to Sirae87   Useful

    I cleaned the little tiny micro holes - and it worked:

    I also had a problem with my internal microphone. In system preferences > Sound > entry, I had the internal mic selected, and the entry level bar would show some activity when I typed in the top of the computer, but not when I spoke. So first of all, I had to figure out WHERE the microphone was actually and I googled and found this on top of my iMac - a very small circle of TINY holes, right in the Middle at the top of the screen. Turns out I have had covered with a decorative Angel, using a sealant that is usually used to stick things to the surfaces. I removed the little angel and PuTTY... but did not always receive my voice recording in the bar of entry-level in sound preferences. I used canned air to blow at the level of the tiny holes, but that did not help. Finally I found a brooch (thinking it was actually too thick, drill holes of small microphone) but I WAS able to push the small holes - so I poked each other - and voila - my internal microphone now work! Yay!

  • My Mac book has clicked and she will not stop. Can I have a virus

    My Mac Book pro has suddenly clicked and I can't stop it

    I may have a virus

    A clicking noise is often an indication of a failing hard drive. Make a backup while you still can, then use to check disk utility.

  • Using firefox 14.0.1. Load a link using the right click and "Open link in new window", translates into a new window opens but doesn't show URL address bar...

    Using firefox 14.0.1. Load a link using the right click and "Open link in new window", translates into a new window opens but doesn't show URL address bar. However, if I click with the right button on a link and select "Open link in a new tab", the tab displays the URL in the address bar. If it works when a new tab it's not in a new window.

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

  • How is it, I can't click and anything (tabs, Favorites, etc.) drag in Firefox more?

    Windows 7 - I can no longer click and drag anything more. Try to click and move that a tab just selects the tab do the same thing to just bookmark selects the bookmark. In addition, Firefox is now suspended all the minutes for anywhere from a few seconds to a minute.

    I uninstalled and reinstalled to no effect.

    Hi kabooki108,

    I'll try from Firefox Firefox to solve the issues in Safe Mode. If you do not have the issue so that all your modules, extensions, and themes are disabled, you can try adding them in one by one until you find the culprit. You should look at the guide to troubleshooting Extensions and themes and article troubleshooting issues with plugins like Flash or Java to solve common Firefox problems as well.

    You can also try to create a new profile.

    Hope this helps!

  • Click and drag in the Favorites or in text fields does not

    Click and drag does not work with favorites anywhere, or any text fields. He used to work a lot in v11, but not v12

    I tried to revert to my version of Firefox v11 backup but it keeps automatically updated to v12 despite disabling auto update in the preferences and even when it is offline - frustrating.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • I click and drag the music from my library to a new playlist and some songs are dark and will not play on my device.  Why?

    I click and drag the music a new reading list, but some songs are not highlighted in the play list and will not play on my device.  Why?

    Try two things...

    (1) the songs greyed out can be unchecked. Uncheck the songs are normally excluded from track to track synchronization and normal. With the help of the songs or the list view Ctrl + click on an empty box to check all the boxes in the list of active reading.

    (2) try to go to file > library > Update music library to iCloud and do the update.

  • Quick start for Windows 10: Satellite Mini click and others

    I had some problems with the camera and the battery on the Mini click and another Tablet from the Point of view (Holland).

    He occurered that after updateding etc. on drivcers restart the old problems would return that was due to the quick start option that is set in the bios NLE, but can also be disabled
    Settings > Power Options > Ssettings change existing > Shut doen settings > turn on TASF start [Uncech box]

    It seems that some applications don't close properly when you use the option stop and Hibernate in the memory of QuickStart.

    This occurs if you use either reboot option to turn off manually with a second 10 press the manual power button

    A note to tell you that you can also find the option above via
    Control Panel > hardware and sound > power options > etc.

  • My screen is clicking and my phone it 2 months old

    My screen is clicking and my phone it 2 months old

    Not enough information. What do you mean by ' clicking '? When you say it it only 2 months, where did you bought it? At an Apple store or FSAA provider?

    See you soon,.

    GB

  • Firefox does not open new tabs whe I right click and ask then?

    Firefox does not open a new tabs when I have so much demand by right click and choose 'new tab '.

    He has always worked until today?

    I was not at work on Monday, so I don't know if that's a problem then.

    There is an incompatibility reported Firefox 3.6.13 with the Ask toolbar. Until Ask resolves the problem, disable or uninstall the Ask toolbar. See:

Maybe you are looking for

  • Libretto U100: Screen short film playing with Express Media Player

    Hello. I have a Toshiba Libretto U100 with DVD Dock, and when I use Express Media Player to play the DVD, the image on the screen is too small. I find the way to play in full screen mode but I failed. Now the questions. It is there a way to switch to

  • Satellite L655-11 t - backlight the keyboard power switch?

    Hello Just bought the L655 - 11 t for parents and they say when they went it they would insist "fn" key and the rear lights of the keyboard would light up, but now that I'm here, it no longer seems back light? The Satellite has a feature of keyboard

  • 0x8007007B error code

    Do a system restore but get this error 0x8007007B code.  The reason why I wanted to do a restore of the system is that the USB ports on the front panel of the computer became suddenly not recognized by the system, so I was going to restore to early d

  • C7280 through time Capsule network Mac with Snow Leopard iMac, MacBook Pro S and Compaq W7

    The HP works very well with the desktop iMac computer, but does not print 2 laptops, even if they seem to be recognizing the network. Says not connected printer. The test report of the network of wireless HP Photosmart C7200 and Configuring Page appe

  • How to install advinne d303 usb hspa modem on windows 7

    I have problem with my USB Modem when convert my pc Window XP SP3 in Windows 7.My modem has been Advinne model: D303 HSPA USB Modem 7.2 m.So, how can I solve the problem and what setting I will chose Windows 7 setting.