Head turns does not properly

Similar Questions

• When I turn on my computer a warning appears indicating "delivery manager does not properly.

  DEP original title: data

  When I turn on my computer, a warning appears that says "delivery manager does not properly" and when I click on help and support balloon explanation is that my DEP is not configured correctly.

  Then, after following the instructions and correct the parameters I restart my pc and still the same message appears.

  Hi Olliewoods,

  (1) since when are you facing this problem?

  (2) what is you receive the exact error message?

  An application installed on the computer may be the cause of this problem; I suggest you try the following steps:

  Method 1: Put the computer to boot to determine which application is causing the problem.

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  See the link below for more information on Data Execution Prevention
  Data Execution Prevention: Frequently asked questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Toshiba 47L7453DG - CEC does not properly using exernal amplifier

  I bought Toshiba 47L 7453 a few days ago.

  It is connected to the amplifier Onkyo TX-NR535 but CEC does not properly. Volume control works fine but On / Off or stanby does not at all.

  My previous TV Toshiba 42XV635DG was communicated by the CEC with the Onkyo even without any problem.

  The wire connection is HDMI 1.4 certified.
  Maybe the problem is with the firmware of the TV.

  Maybe someone had the same problem.

  Any suggestion?

  Thank you

  Hello

  From my point of few TV and amplifier are connected some CEC (Volume control) functions that work. I think you should check the auto power settings and HDMI CEC standby control system.

  Manual, you will find some important notes:
  http://www.Toshiba-OM.NET/LCD/PDF/English/L7453-424755-English.PDF

  _Page: 11_
  + You can control the basic functions of audio/video devices connected with s TV remote if you connect an HDMI-CEC compatible AV amplifier or playback device. +
  + If several devices are connected, the HDMI CEC control function may not work correctly. +

  _Page: 86 - 87_
  + When the point to activate the HDMI CEC control in the menu of HDMI CEC control configuration is defined on.
  + On, also allocated to individual features will be activated. +
  + When the connected equipment work, HDMI CEC control automatically detects the TV input selection. If the TV is in standby mode, it will be automatically reactivated. +
  + If the TV is off (standby), television will send a message turns off (standby) all devices HDMI CEC control connected to the TV. +

• Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated

  Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated. Tried all posisible boots and no joy, continues to turn it back on! Frustration...

  Hey James,.

  I does no change, I didn't download a document from my email (from a sender of confidence). I tried to start in safe mode, just, it restarts and goes back to the corrupted checksum display... Last known good config was the same result! The only error message is one that is in the title of this post, not others. Another detail, that I forgot to add is that it does not get insofar as a logo windows before it fails, just the toshiba start screen, then either passes the corrupt message checksum or a blue screen and restarts before I can read the text on the blue screen. Thanks for your response! Any additional help would be excellent if you can. In the meantime, I'll try your methods. Thanks again
  OK, I have now managed a Startup Repair trying over and over again. Restore all settings and now looks very good, thanks for your help!

• 0xc0000221 error: Windows Boot Manager is possibly corrupt. The header checksum does not match the checksum calculated.

  Just turned laptop on a message saying... Manager of windows startup, the file is possibly corrupted, his header checksum does not match the sum of computer control. ?? File: / windows/system32/win load.exe...

  status: 0xc0000221.

  What help please this meen?

  Original title: help!

  Hi markwiggins,

  Follow these steps:

  Method 1: Run the Startup Repair

   

  For instructions, see the following article:

   

  Startup Repair: frequently asked questions

  If the startup repair does not resolve the problem, follow all the methods of these items:

  What to do if Windows does not start correctly

  How can I fix a startup (startup)?

  Method 2:

  Restore the system in the advanced system to a restore point recovery options menu before the show.

  For more details, see the following article:

  What are the system recovery options in Windows Vista?

  Method 3:

  Use the Bootrec.exe tool in the recovery Windows (WINRE) environment to troubleshoot and repair the Boot Configuration data.

   

  For instructions, see the following article:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

• Safari Web Clip does not properly

  Hello everyone

  I have a problem with safari Web Clip and that is does not properly for almost all pages, as example, I participate in a contest of therapy dbrand/unbox, and I really don't want to open the web page, whenever a new winner is announced, so I created a web clip, but it does not work well When I click the web clip icon he asked the location of the clip and when click on done, the web clip is from a different region and I can't fix.

  

  

  Is this some sort of bug or can I fix it myself?

  Web Clip still didn't work if the cut element remains in the exact same on exactly the same site. This is apparently not the case here.

  Dashboard widgets in general, are an old technology that has not been updated in many years.

• EQUIUM A60: graphic ATI does not properly

  I HAVE AN EQUIUM A60 1 YEAR MESSAGE SUDDENLY CRASH SAID: ATI GRAPHICS CARD DOES NOT PROPERLY.
  CAN'T FIND THE DRIVERS UPDATED ON ATI OR MICROSOFT HELP PLEASE?

  Hello

  Can you tell me when this message appears?
  First of all, you can try to update the graphics driver from Toshiba. It is a first step that you can try.
  Check this page for the driver download.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• Error message: Shockwave, Flash Player does not properly during playback Slotomania

  Original title: shockwave flash player

  Hi I have problems with some games. Especially slotomania. When I enter the RM of slotomania that flashing message saying that Flash shockwave Player does not properly can give to interrupt or stop options taken but its gone too fast for me to do something. Then the really slow game. Can you help me?

  Hello Marilyn,.

  Thanks for posting your query in the Microsoft Community Forum.

  According the information, you are facing problems to play games online as Slotomania due to the Adobe Shockwave, Flash Player error messages.

  It would be useful that you can answer these questions to help you further.

  1. are you facing problems that when you play online game Slotomania?

  2. using Internet Explorer or another web browser?

  3. what version of the Windows operating system is installed on your computer?

  4. have you made a recent software or hardware changes to the system?

  If you use Internet Explorer, you can see the article and check if it helps to solve the problem.

  The problems of games online using Internet Explorer

  It will be useful.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• fan does not properly

  Does not properly on the laptop

  Sometimes it is just dust, animal hair etc. blocking the fan. Take a can of compressed air and blow all the ports/vents/opening very carefully to see if any change.

• Setup.exe does not properly

  I'm trying to upgrade to Windows 7, and at one point in the configuration of several programs are listed to be uninstalled, when it gets to the Realtek USB 2.0 card reader a pop window that says setup.exe does not properly.  Cannot uninstall in Control Panel either. Also tried disabling antivirus and firewall as a suggested site. Is there a way around this kind of Setup Windows 7 allows you to work around this problem

  Repeat: You need upgrades to Windows 7 not Windows updates.
  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  Please post on the forum for Windows 7 update/install. TaurArian [MVP] 2005-2010 - Update Services

• olecnv32.dll is possibly corrupt. The header checksum does not have the calculated checksum

  When I tried to start the desktop computer with Windows XP operating system, I get the message "olecnv.dll is possibly corrupt. ' the checksum of header not the checksum calculated. the screen will not forward.

  Please advise to Prime the system.

  Udaya

  If the olecnv32.dll file is corrupted, you will see an error like this:

  STOP: c0000221 {Bad Image Checksum}
  Olecnv32.dll image is possibly corrupt.  The header checksum does not match the checksum calculated.

  Curiously, if the file is completely absent or has a length of zero byte XP will start just fine without it.

  Given that it is one of 3498 files Windows File Protection deals with, it must be another copy of the file on your system is the dllcache folder.

  As Wunders says you can make a Hiren boot CD and Mini XP mode, see if you can find a copy of the file in one of these folders (assuming that XP is installed on your C drive):

  c:windows\system32\dllcache
  c:\windows\ServicePackFiles\i386

  If you can find a copy, rename your a suspect and replace it with the copy and see what things look like.

  If you can't find a copy, there is one on my SkyDrive, you can download and network disks to the system afflicted by using a Flash DRIVE or a floppy disk.  You should always use Hiren for this method.

  If that all sounds complicated to and you do not have a genuine XP installation CD bootable from where you can start in the XP Recovery Console, you can create a bootable XP Recovery CD of Console and see if you can replace the file from there to the replace.  I can send you instructions if you need to know how to do this.

  I hear Support Engineer "experts" hired by Microsoft, which suggests that you run sfc/scannow to replace the file missing, but that won't work because this is what sfc/scannow does, this isn't how it works and it's not what it is for.  I know that it does not replace the file because I tried.

  If you need to download the file, here's how:

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called olecnv32 when the name of the file should really be called olecnv32.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• "The file is maybe damaged. The file header checksum does not match the checksum calculated. »

  Hello

  I work with a HP Pavilion a6030n PC with Vista OS base. I had problems with the computer recently when starting. He continues to work at some point during the process and crash, forcing a hard stop. I'm not too computer savvy, but can generally work through questions. I tried several (and probably useless) methods to try to get the computer to work, with a modicum of success. Today, I received this message: "the file is maybe damaged. The file header checksum does not match the checksum calculated. "Hmmm... I looked through the forums and found a lot of computer-speak, who basically told me that I'm over my head. I thought that I would try at least ask the question before resorting to what is the hard drive a person to fix if all goes well.
  I can get it working again, or is my HP to his last breath?
  Thank you!

  If warnings getting You ' r files are corrupted, which could indicate a problem with the hard drive (most likely) or the memory/RAM in the computer (a little less likely but a good possibility).  Your computer came with a disk diagnostic or diagnostic software you can run to test the components inside?  You can also download this software and run it to see if he can help you narrow the possibilities.  Otherwise, I recommend to find a local repairman good and trustworthy and have them check for you if you are not adept at hardware troubleshooting.  It can get very frustrating and very expensive, very quickly.

• try to install 4 GB of ram. Get the error «the file header checksum does not checksum» calculated

  Microsoft online tech help recommended I install 4 GB of RAM on my Dell Vista Home computer. The first stick fine boots.

  When I add the second stick the computer poster "the file may be damaged. The file header checksum does not match to the

  checksum calculated. "I see that it is a common error message online search, but nothing specifically addresses

  the issue of the Ram. Any help out there? Thank you.

  Hello

  You can contact the manufacturer of your computer for support and check if it helps.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support?c=us&CS=19&l=en&s=DHS& ~ CK = anavml

• Graphic drive does not properly.

  Graphics driver does not properly.  Screen will Dim and must restart to resume use.  Occurring more frequently now.  Y at - it a fix for this problem?

  Problem does not occur in safe mode.  Failure seems to occur on any key or the video style.

  Any material support is the manufacturer of the hardware regardless of the operating system that you choose to use.  As it is unlikely that you have a Microsoft video/graphics card - one you have and have you downloaded and installed the latest drivers/software they provide for your particular device?

• COQ2014: COQ2014 AMD/ATI does not properly

  2 messages warn me for "AMD/ATI does not properly" and "search solution AMD Display adapt-ATI Radeon Graphics Cards.  Search for updates, solutions with nothing appear.  I don't know what that precisely uninstall nor where the new material.

  Thank you!

  Dear customer,

  Welcome to the HP consumer's Support Forum!

  Please try and uninstall the graphics driver AMD/ATI to address current from the control panel > programs and features.

  After you have uninstalled the current graphics driver, please try and install the following driver and check:

  Suite software Catalyst:

  http://support.AMD.com/en-us/download/desktop?OS=Windows+7+-+32

  Hope this helps, for other queries in response to the post and feel free to join us again.

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  GR1
  Although I am an employee of HP, I speak for myself and not for HP