Header and data in an incremental file

Similar Questions

• problem with the creation of a folder and a file, read in the header and data

  I want to create a new folder named by time and then generate a file inside this folder txt: reads first header information and then reads the data, but the problem is that if there is this folder, the header appear in the file, if this folder is not existed, the header will not appear in the txt file.

  Thanks for your help.

  Hi Junniji,

  Check the attached vi. I did what Bob was trying to explain in the vi. I documented the steps described in the block diagram. Take a look. I had few comments on your code as well. Always try to connect the wires of the error when coding and try to keep the neat code so that its easy to debug and understand the flow (even if it's a test code ).

  A Subvi missing in vi who sent you there. I hope that you will have in your pc

  Kind regards
  Amine31

  (Give glory to good answers, mark it as a Solution If your problem has been solved )

• SQL * LOADER skip the header and the footer while loading

  Hi, how can I ignore the header and footer both a flat file during the loading of a table using sql * loader?
  Also, can I use the direct method if my target table has a primary key and not null constraints defined on it?

  Hello

  To ignore the header, you can use JUMP, for the footer there is no specific way to ignore it (maybe it would be rejected).

  For more information on the laoding modes, you can check [11 classics and Direct Path loads | http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/ldr_modes.htm#g1023818].

  Kind regards

• Write the header and mixed data on the worksheet

  Hello world

  I'm having some problems with writing my data in a spreadsheet file... Basically, I chewed my data and got the values that I want... When I stop the loop I want data saved in a spreadheet... The first line must be a header, and the lines below should be the corresponding data, consisting of a string and numeric data. See the example below.

  Topic name, Max Force (N), means Force (N), Min Force (N);
  David, 2134, 23, 284;
  Phil, 1234, 43, 321;
  Tina, 4059, 335, 55;

  Can someone please help with this?

  Kind regards

  Jack

  This will create a queue (test.csv), check if file exists(no:_creates_header_plus_data...if_yes:appends_data_only):save to a folder first... vi test.csv will be saved in this folder also.

  

• Services Web site deployment error "server returned nothing (no header, no data)" and much more

  I develop a VI on a large scale with a VI of web service combined in 2010 SP1. The "auxiliary" VI is responsible for storage of data capture and analysis as well as data and communications. It's big enough and communicates with the web method VI through shared network variables [and I use the DSC module to allow the management of shared variables of events].

  I can build and deploy the web method VI very well and it runs great. However, I need to communicate between the auxiliary and web method VI, and it seems that I can't do without including the auxiliaries vi when generating RESTful web services [also, is there a way to make this web service generates?]. When I added the auxiliary vi for the construction, he built very well, but then I got during deployment:

  "Server returned nothing (no header, no data).

  The next time I tried to deploy, I got a fake NI Auth dialog by this knowledge base article. By following the instructions for case 1 ["failure of Web application server since last started"], I ran Services.msc and found that NEITHER Application Web Service was not running. I tried to restart the service, but got this error:

  "The NI Application Web Server service on Local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the service logs and alerts. »

  Knowledge base article suggests to restart at this point and I did, but I still see the same behavior. So really, I have a few questions:

  1. is it possible to deploy a variable library shared on the network through a local web service deployed and VI?

  2. What are the causes "server returned nothing (no header, no data)" in the deployment? A google search gave very little.

  3. what this means: "NI Application Web Server service on Local computer started and then stopped... '. "and what do I do to get my Web Application Server up?

  [to pile on the pile... I tried to re - activate the localhost:3580 Web application server and got an error. Localhost:3580 then offline also.]

  Thank you!

  Update.

  I noticed that the Web application server attempted to deploy the web service broken and choke her. There seemed to be no way to clear the .lvws created at the origin of the construction. I was able to remove the deployment folder to \UserServices\deployed\ $(WebServicesRoot)- , but it has been recreated from the .lvws whenever I tried to restart the service.

  So I called NOR and they told me this directory [XP]:

  C:\Documents and Settings\LocalService\My Documents\LabVIEW Data\WebServices\Standalone

  The .lvws has been in this folder. I deleted it and now I can run the ApplicationWebService. Apparently this file hidden undocumented is a "not-quite-bug" that is recognized as needing a fix in future releases.

• APEX-PDF-reports: Add IDS and data more on behalf of file-PDF

  Hello
  I create a report layout in APEX, and a report query to export data to a PDF file (I use BI Publisher).
  It works fine, but now I need to add the ID and some other information to the file name.
  
  Because if the user create PDF files, it should be able to see, this file is for which data...
  
  How can I do this?
  
  Kind regards
  Mark

  Hi Mark,

  The file name is based on the name of your report query. If you want to specify your own file name, your best option would be to create a process of the page to start the download of your report by calling the API print APEX directly, here are the API, you must call, it is documented here:

  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21676/apex_util.htm#CHDGFADB

  APEX_UTIL. () DOWNLOAD_PRINT_DOCUMENT
  p_file_name in VARCHAR,
  p_content_disposition in VARCHAR,
  p_application_id in NUMBERS
  p_report_query_name IN VARCHAR2,
  p_report_layout_name IN VARCHAR2,
  p_report_layout_type IN VARCHAR2 default 'xsl - fo.
  p_document_format IN VARCHAR2 default 'pdf '.
  p_print_server IN VARCHAR2 default null);

  Just specify the desired, dynamic name including IDS, or information you need for the content-disposition header, you can use "attachment" or "inline" and then enter your application ID, the name of your query and report layout and the desired output format. Print server argument can be NULL to use the server instance to the scale defined reports.

  Kind regards
  Marc

• How to export my history of travel (including the date and time) to a text file?

  I need to collect data on the amount of time I spend on specific sites, research on my thesis topic. In my browsing history data. I need a way to export the data from the history file including the date and time information in a format that is easy to parse (.txt file delimited by commas, etc.)

  You are welcome

• How to read a combination of strings and data data file

  Hello

  I'm having the combination of strings and datas to read a data file. I'm reading the file name, the time constants and comments in four indicators separate string (lines for comments varies for different files). And read the data in a 2D array. How can I do this? Y at - it a function that can serch of special characters in the spreadsheet file, so I can locate exactly where I should start reading the specific data. Here's how the data file is displayed. Thank you very much.

  Best,

  Richard

  filename.dat
  14:59 12/31/2009
  --------------------------------------------------
  Sample = 2451
  Frequency = 300, time of waiting = 2500
  Temperature = 20
  --------------------------------------------------
  a few comments
  a few comments
  a few comments
  a few comments
  a few comments
  --------------------------------------------------

  7.0000E + 2 1.5810E - 5
  7.0050E + 2 1.5400E - 5
  7.0100E + 2 1.5500E - 5
  7.0150E + 2 1.5180E - 5

  ....

  Here's a (big) hint.

  

  I would like to give you an excerpt, but I've not updated this machine yet.  It's a pretty boring delimiter, if you know what's good for you, you start to use commas, tabs or simple spaces (my order of preference).  It is far too easy start add or remove spaces and then you need to use more complex methods to obtain data from worksheet.

• Vista will not display description of the file on mouse over. File name, Type, size, and Date modified see the upward, but no description.

  Vista will not display description of the file on mouse over. When I mouse over, a pop-up window displays showing: file name, Type, size and Date of change, however, it does not show the description of the file.

  So, for example if I have 5 files on different types of screw - the description tells me that the size of the screws. IE. 1.5 mm or 1. 8 mm.

  Update: try to get the description of the file displayed messing around in the file properties, now out of 10 records, only 2 includes the name of the file in the mice on the pop-up window. So now what lack us, it's the file name and the Description file.
  Help, please...

  Description of the file in as long as this is not one of the available variables, which can be shown with ToolTips - but there are others who could easily serve the same purpose. Here are the options:

  Consulted
  Attributes
  Created
  DocAuthor
  DocComments
  DocSubject
  DocTitle
  Modified
  Name
  Size
  Type
  To write

  Here is an article on how to change what is shown. http://www.ghacks.net/2008/02/10/customize-windows-explorer-tooltips/ . It is to change the registry, make sure you so first back it up before doing anything so that you can recover in case you make a mistake (or do the right thing, but it does not work as expected). http://www.instant-registry-fixes.org/how-to-backup-windows-vista-registry/ .

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• Smartphones blackBerry how to transfer files and data

  How can you transfwer files and data from memory internal to micro sd card because my internal memory is full, and I don't want to delete things helps!

  Welcme to Frums.

  It is a duplicate.  Looks like you have posted this question within a few hours. Please see your other links I gave.

• How to find and get rid of unnessary files, records, data, etc.

  How to find and get rid of unnessesary files, folders, data back up info etc.

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you must clean the unnecessary files.

  Perform the steps from the link below and see if it helps.

  http://www.Microsoft.com/athome/Setup/CleanSweep.aspx#fBid=H8M_xQi7xZQ

  Hope this information helps.

  Meet us if you encounter any other Windows problem, and we would be happy to help you.

  Good day!

• How to get a program to the shared program files and data on a different computer?

  I run an accounting program on a Windows XP computer that has all the programs files and data shared to our local network. This accounting program is also installed on several other machines, Windows 7, and I want to know, how I move these Windows 7 machines to use the program and data off the XP machine, instead of using local data files (static)?

  This has been fixed, thanks. I ended the program on the host computer, and on this computer I just run the .exe; i.e. I actually run the program on the host computer.

• I want to delete wtf and data files, I'm the administraghiter but his application for permission

  I want to delet these 2 files but it said access denied need administraighter permission but I am the admin

  Hello

  -What is the exact wtf files and data location you want to remove your computer?
  -Did you do changes on the computer before this problem?
   
  I suggest you to follow the steps mentioned below and check if it helps:
  1.right - click on file or folder, and then choose Properties.
  2. click on the Security tab.
  3. click on Advanced, then the owner tab.
  4. click on change, then your user name (make sure to check Replace owner subcontainers..).
  5. click on apply, and then click OK.
  6.now, under permissions, click on change permissions.
  7. click Add, and then type your user name and click on OK.
  8 check the box allow under full control, then click on OK.
  9. now, choose the replace all the CheckBox child permission.
  10. click on OK, then apply, then on Close.

  If it's system files, I suggest you don't not to remove files.

  Hope this information helps.

• I only get the (page 1 of 1) header and footer (file://C...) when I print online

  When I try to print a document online, I only get the (page 1 of 1) header and footer (file://C...)  This is not always the case.

  How to print the document, as indicated on the screen?

  I'm on HP Officejet Pro 8600, but had the same problem with my HP Officejet 6500.

  Windows 7

  He tried again on another messaging - and it worked! It must be me.
  Thank you.

• I have CS5 and you will need to look at the files camera raw for a canon EOS7. How do I up date my camera raw file?

  I have Photo shop CS5 and need to look at the camera raw files, form a Canon EOS 7. I went up to dates and tried to date my camera raw file to version 6.7 but I get a charging problem down. Any ideals on to grader up to my file?

  Now, what you need to do is download the DNG Converter and convert your raws EOS to DNG, ACR 6.7 can read.

  Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.0

  Here's how to use the DNG Converter: Camera Raw: how to use Adobe DNG Converter - YouTube