Headset doesn't work for Inspiron 3531

Similar Questions

• My headset doesn't work more than one second to another second

  Hello world

  My headset doesn't work more than one second to another second

  I was talking with my friend, everything was fine but I started eating and I turned off the microphone with the switch based cable.

  My friend asked him something, I wanted to answer then I switched back on it. We did this several times, but after 4-5. marketing, he was not able to hear me more. I tried with other micro there must be something with my pc (del or related more difficult)

  I tried everything already, even downloaded the MicrosoftFixitAudioRecording.RNP.Run.exe. I ran, but could not solve the problem.

  He said that "the Audio recording device is disconnected.

  However his trendy ofc, but anyway his doesn't...

  Can someone help me please?

  My partners can not hear me, so I just had the problem with the microphone part. The headphone speakers works well.

  All the drivers are up to date. The computer is new (~ 2.5 months)

  I run Windows 7 64 bit

  Hardver specifications I can add later if his need.

  Thanks for any help in advance. Best regards; Rizkay

  PS. : sry for my bad English

  Hi Rizkay,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that this headset stopped working.

  There may be a hardware conflict.

  I suggest to try the steps in the Microsoft Help Article below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=Windows-7

  You can view the help on the question below link
  Connect a microphone music player or other audio to your computer device -
  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• bought iphone7 pluse Qatar facetime doesn't work for the sim card of the India

  Hello Sir,

  I bought iphone7 pluse in qatar that the facetime doesn't work for the sim card of the India. and also before 2 years I bought the iphone 6, as well as in the same countries qatar, but that works perfectly and facetime works for me. the difference what I unbox my 6plus in indai, I unbox my 7plus in qatar and I put the sim card of sri lanka first and tried to India sim then and facetime disappear from the home screen. at the point where I insert my card sim of qatar is worrking. Please I need help. If I buy another piece of 7plus and bring it in sri lanka or India my facetime work? or what? I'm totally confused plese answer me as fast as you can

  FaceTime is forbidden by the law in Saudi Arabia and the UNITED Arab Emirates and is removed from iPhones sold in other countries of the Middle East, if they are used outside the country where they were originally sold. If you plan to use an iPhone outside the Middle East, then don't buy it in the Middle East. The one you bought there FaceTime was illegally imported from another region and sold it.

• Headset doesn't work when I plug them in

  My headset doesn't work when I their connection, I tried in the Jack in the front and the back of the PC, I get nothing. IM using vista Home Premium SP 2 2007. My speakers are working properly. My PC is a HP Pavilion Elite e9150t.

  can someone help me

  Ed

  I have this same problem with my e9150t and would be interested in the answer.  Normally my sound out through my HP 2159 m monitor via HDMI cable.  However, when I plug in the headphones, the sound continues to come out on stage monitors and I have no sound on the headphones.

  Anyone?

  SA

• Hi, I downloaded CC on my laptop yet CC serial number doesn't work for my office and says it's a counterfeit disc?

  Hi, I downloaded CC on my laptop yet CC serial number doesn't work for my office and says it's a counterfeit disc?

  Pippa,

  Please see this link for help:

  True verification download or installation failure produces creative suite 6

  Guinot

• headset doesn't work does not correctly

  I use a DYNEX headset, which is a usb headset. It worked fine on windows vista 64 bit and I got my upgrade disk today. I have upgraded to windows7, but a few problems. My volume coming through my computer works very well. When I have my headphones plugged in where is the problem.  I use ventrilo for communication. A go by my President of helmets every time he gets static-y and rest like this for about a minute or until another sound comes through. People can hear me very well and clear. This is not a vent issue because static electricity occurs during all sounds, even the windows notification sounds. I've updated all the usb drivers and all windows update downloads. Any ideas?

  darkriku197,
  If you have all the updated drivers so you can check that it is compatible with Windows7.  Here is the link to the Compatibility Center.  You just make sure it is set as the audio device by default when it is plugged in.  Also, you have to go to the properties of the head set and ensure that no improvement is lit.  To do this, go to start > Control Panel > hardware and audio > manage Audio devices > select the headphones, and then click Properties > improvements.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Smartphones BlackBerry App World doesn't work for us

  Hello
  I am a resident of Saudi Arabia and when I download software BlackBerry father tells me an error can not download
  Knowing her that I know that it doesn't work in Arab countries, but this thing bothers me very
  Please provide the solution
  ----------------
  Note that I use Google translation

  When all your Saudi mobile providers to sign agreements with RIM BlackBerry to support App World, then App World will be available for your devices.

  Right now, it's your mobile phone operator. You should call them and put pressure to get App World taken in charge.

  Good luck.

• Samsung headset doesn't work does not correctly on my macbook pro 2015.

  My samsung headset does not work on the macbook. one of the outputs of the listener is weak compared to the others. Headset works well on other devices. Is this a problem with my slot, or is it because I'm using another brand? Help me please

  Go to the Audio configuration utility and Midi.

  Also, in the future please post El Capitan questions in the forum El Capitan:

  http://discussions.Apple.com/docs/doc-2463

• Fingerprint utility doesn't work for normal users - Tecra M11

  Hi all

  I installed windows 7 pro laptop Tecra M11 and the Toshiba finger print utility does not work for normal users.
  This works only for domain administrators. The TFPU is not working is not for users in the normal domain, local users, local administrators. If we run the utility, it will ask you to enter the password of windows, and once we have applied the password, then the message saying 'entered password is not valid' will invite even if we try to use the utility first.

  If we try with a domain administrator account, it will work without any problem. Can someone help me just shoot this question?
  Thank you.

  How many people and how many accounts should work on this laptop?

  To be honest I don t know what do you mean under normal users
  Install OS and create user account/accounts, define the utility of fingerprints and let us know if it works properly.

• My iPhone 6plus Bluetooth will not connect to my headset, after having worked for 2 weeks, that has happened on 2 different pairs, now my new pair doesn't connect at all?

  My iPhone more than 6 is running iOS 9.2 where after awhile, it seems not longer connect to my Bluetooth devices. Now I have a new helmet and it won't even find them to connect.

  Replace the BlueTooth devices in pairing mode and they should reconnect.

• HEADSET DOESN'T WORK DON'T NOT :(

  I have a HP Pavilion TouchSmart 10 10-e004au Notebook PC. Whenever I plug my headphones sound speakers instead of headphones. my computer does not even respond when I plug in the headphones. I tried with several Different headphones, and it still does not work. I don't know if there is something wrong with my computer or I have to download a software to do its job. I have had this problem since I bought my laptop. Help, please

  Hello Renee19,

  I see you have a problem with the sound from the headset. I'll try to help you with this problem.

  Try different headphones you mention. Have you tried USB as well as that use the socket? This would help to test the equipment, it could be the headphone jack, which is the issue.

  I also recommend looking threw this document:
      Solving Audio problems with speakers external, headphone and HDMI Sound Devices.
  Also this:
      No sound from speakers (Windows 8)

  I would like to know how everything goes.
  Thanks for posting on the HP Forums.

• Headset doesn't work is not in Windows 8

  Original title: Setting of FRENDS headphones

  Hello

  Then I was given a pair of headphones of Taylor of FRENDS for Christmas, and I was not able to use them on my ASUS laptop. I have Windows 8.

  I tried to update the drivers on my computer, but it says that they are all updated. My headphone is working properly when I listen to them on my iPhone 5 c, and others said that these headphones are compatible with PC laptops.

  I can hear sound when I plug it into my laptop, but it is very distorted and echo. Some songs I listen to his away and sometimes I can't hear the whole song.

  Is there a setting that I can change so I can listen to with these headphones? I really love whenever I can use with my phone, but I want to be able to listen to them with my laptop.

  Thank you!!

  Hello

  Thanks for posting your query in Microsoft Community.

  We regret the inconvenience caused to you. We will be happy to help you with your problem.

  1. The problem occurs with particular headset only or with other headphones as well?
  2. Have you tried using tick and different helmet so you are facing the same issue?

  This problem may be due to various reasons like drivers are not compatible, or the headphone jack have some problems. First to isolate the issue try to use different headphones and check if the problem is only with a helmet in particular.

  In addition, you can try after operations from the link below and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/headphone-jack-not-working-in-Windows-8/95e7f89e-8c46-478D-b549-5895013de35c

  Let us know the status of the issue. We will be happy to help you further.

  Thank you.

• PhoneGap Blackberry App doesn't work for ajax, gives 500 Internal Server Error calls

  Hi all, I have developed an application that off a call ajax to the server aspx page.

  The call fails when I'm the trigger through the public IP address, but even works fine when triggered by a local IP address.

  The aspx page works very well when it is called by the browser, the question is when ajax call is made from the app.

  Everything works fine on Android versions and iOS Apps with the same code.

  The configuration file also has access origin defined at all (*)

  $.ajax({)

  LINK: URL OF THE ASPX PAGE.

  type: 'POST',

  processData : true.

  data : {params},.

  cross-domain: true,

  error: function (result)

  {alert (result.status + "" + result.statusText);},

  successful operation:

  "function (Data) {alert ("success") ;}});

  Please help, thanks

  do white list all URLS for Ajax calls. the accessible areas via Ajax must be explicitly whitelist.

• My headset doesn't work / drop-in playback devices

  My headphone stopped working today. The speakers are working correctly. They are not appearing in the playback devices. I went through several stages, as recommended by the Council of community messages. The headphones are not appear as a device turned off or disconnected. I also ran the troubleshooting, and it did not work. I have a Toshiba laptop and I'm on Windows 8. It drives me crazy that I can't understand that. Help please! Thank you!

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Select for update doesn't work for me

  I have a table that stores a set of numbers. These numbers, when used, should not be used again within 365 days. In addition, different process requesting a number should be split different numbers. Basically, a number must be used only once.

  Here's the code I used to allocate 100 numbers. It is supposed to select a line, try to lock it using 'UPDATES'. If he is able to select, I guess that it is available and update the LASTMODTM. It's impossible to choose, this means another process has locked, and I will try the next number.

  I've run 2 process running the code below together, expects that each process will get 2 unique series of numbers, but I'm left with exactly the same list of numbers for the two methods. I believe that SELECT for UPDATE is not working, that's why the two processes are able to choose the same line. Any advice for me?

  DECLARE

  v_nbr NUMBER_POOL. NBR % TYPE: = null;

  CNT INTEGER: = 0;

  v_nbrlist VARCHAR2 (32676): = ";
  

  BEGIN

  FOR x IN)

  SELECT THE ROWID RID

  OF NUMBER_POOL

  WHERE

  AND SYSDATE - LASTMODTM > 365

  ORDER OF LASTMODTM, NBR

  )

  LOOP

  BEGIN

  -To lock the line so that it be referred to the other application

  SELECT MAWB

  IN v_nbr

  OF NUMBER_POOL

  WHERE ROWID = x.RID

  FOR UPDATE NOWAIT.

  EXCEPTION

  -Impossible to line lock, this means that this number is locked by another process at the same time. Try the next nbr

  WHILE OTHERS THEN

  CONTINUE;

  END;

  UPDATE NUMBER_POOL

  SET LASTMODTM = SYSTIMESTAMP

  WHERE ROWID = x.RID;

  CNT: = cnt + 1;

  v_nbrlist: = v_nbrlist | ',' || v_nbr;
  

  IF cnt = 100 THEN

  DBMS_OUTPUT. Put_line (SUBSTR (v_nbrlist, 2));
  

  EXIT;

  END IF;

  END LOOP;

  END;

  TKS all for your advice. I solved my problem

  Sorry - but that does NOT solve your problem. It may "seem" to simple tests you run, but he does not take into account how locking and consistency reading actually works in Oracle.

  It turns out that the 2 process has no conflict each othe at all, because the select sql loop took 0.2 sec, while 100 loops completed almost instantly. So the 2 process select almost at the same time, when first completed the process select, he received 100 numbers in a very short period of time, until the 2nd process is to select always. When the arrival of select 2nd process, the first process had already finished and committed the change. That is why the 2nd process does not meet lock exception.

  Yes--but it's NOT the caue in the root of your problem. The problem is you are using TWO separate queries. The first request is to determine which rows to select, but it IS NOT lockingk these lines. This means that any other user can also select or even lock the rows that were selected only by the first user and the first query.

  To fix this, I simply added "AND SYSDATE - LASTMODTM > 365" for numbers used will not be selected. The select for update query will be raise exception and then continue the loop to try the next number.

  No - that will NOT fix the problem if you always use a separate SELECT statement for the first query.

  A query, even a SELECT query, establishes sthe YVERT point-in-time for the data. This query second "select for update" is still being used by lines that were selected only, but not locked, the first query. This means that an another session/user may have selected some of these same rows in their first query, and then run the second query before and even during your attempt to execute your second query.

  Tom Kyte shows, in the link I gave

  In addition, there are some "read consistency problems" here.

  The min (job_id) select where status = 0, which runs... It returns the number 100 (for example).

  Update us this line - but have not committed yet.

  Someone calls it, gets them min (job_id) select... you guessed it, 100. But they block on the update.

  Now commit you and you have 100. They have now released and - well - update the SAME row...

  for example: your logic does not work. You EF the same record N process sometimes.

  The solution is to LOCK the lines with the first query so that no other session can perform DML on these lines. SKIP LOCKED clause in 11g is what you use.

  See the example of Tom Kytes in its first reply in this thread;

  https://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:2060739900346201280

  Can you show how I can avoid using the QA and use SKIP LOCKED to elements of process simultaneously unpretentious? ...

  Suppose you want to get the first line of a table that is not currently locked and corresponds to a unique key - or otherwise (single would not make sense, he would have one - and this would be trivial to determine whether it is locked or not, without the 'skip locked', you would use just nowait).

  so the case of unique key is not remotely interesting, should not jump - needed ever - locked, just a nowait.

  You come to question and search, for example:

  OPS$ % ORA11GR2 tkyte > select empno

  
  scott.emp 2
  3 where job = 'CLERK '.
  4.

  EMPNO
  ----------
  7369
  7876
  7900
  7934

  OPS$ % ORA11GR2 tkyte >
  OPS$ % ORA11GR2 tkyte > declare
  l_rec 2 scott.emp%rowtype;
  slider 3 c is select * from scott.emp job where = 'CLERK' for update skip locked;
  4 start
  5. open c;
  6 retrieve c in l_rec;
  7. close c;
  8 dbms_output.put_line (' I got empno = ' | l_rec.empno);
  9 end;
  10.
  I myself empno = 7369

  See the 'for UPDATE SKIP LOCKED' in the definition of the cursor? Which LOCKS the lines that are needed AND causes code pass all lines which can already be locked instead of throwing an exception as NOWAIT would.

  Allows you to get some lines unlocked are available that meet your query and prevents the contention with other users.

  NOTE: there is only ONE query.

  Summary - This is your SELECT FIRST query that does NOT lock the lines are selected. It IS THE CAUSE of your problem. Your 'two query' solution ' will NOT work. Use the solution presented by Tom.