Hearing is a way to correct the imperfectinos height? plugin?

Similar Questions

• What is the best way to correct the registry errors without the use of a registry cleaner in XP?

  I am sorry to raise this issue that so many people who have asked me.  I read pages and pages of discussions on the MS forum on this subject, and without exception, all the experts said Microsoft registry cleaners are completely unnecessary and that junk in the registers has no performance impact at all.  Instead, they say, to do x, y and z.  I am running Windows XP on my desk for five years, and gradually, he got so slow it's almost unbearable.  It takes 10-15 minutes just to start, and sometimes it takes 2 minutes or more just to open a window of browser (IE8) or go to the previous page by using the arrow to the left.  Before you tell me all the things it could be, please let me say that:

  1. my PC has not always been this slow!  It is getting worse.

  2. all my Windows software is up to date.  I have automatic updates on.

  3. I have a lot of disk space, almost 75% of free space on a hard drive of 80 GB.

  4. my PC is free of viruses, spyware and Trojans.  I have McAfee antivirus running and I also sometimes run Malwarebytes and Trojan Killer, because they always find things that don't have McAfee.

  5. I defragment my hard drive on a regular basis.

  6. I regularly delete all my temporary files by using the Windows Disk Cleanup utility.

  7. I have very little, if any "Add-ons".  No toolbar Yahoo or Google (or Bing!).

  8. I removed nearly every program that I start, so that they are not running in the background.

  9. I uninstalled all the programs that I don't use.

  However, I still have a slow ever-more computer.  Sometimes, when I see ads on TV to increase the speed of my PC, I download the 'free' software, and they claim to find hundreds or thousands of "registry errors.  When I look at the newspapers, I see many entries in registry for 'Netscape' and 'Google Earth', which I uninstalled years ago, as well as entries for the videos that I downloaded, seen once, and deleted a long time ago.

  So, what's the problem?  If it's not related to my registry (which Trojan Killer says has more 6 000 entries!), what else could be?  I would appreciate greatly any advice you can give, because there are dozens of companies on their touting their registry cleaners and the uninstall (for a price) programs, and after reading reviews of the MS MVPs, I'm skeptical of their claims.  Thank you.  :)

  I can't disagree with a lot of things have already been said.

  I'm willing to accept that your machine does actually takes 10 to 15 minutes on the clock. It's completely absurd.

  Some people call your "Windows Rot" problem. Becomes just the slower windows over time. It is a collection of things that are happening in the background. Yes I believe that the register contributes. Using a registry cleaner is not a "magic" solution But it can help a little.

  The PC care program/process you described is above average.  I suggest you add CCleaner. Disk Cleanup is not bad, CCleaner is better, cleaning of other stuff which does not resemble the DC. It won't be a significant difference because disk space is not your problem, but it will help a little.

  'Play' with the registry is VERY risky. If you decide to go ahead, I would say that first make you a copy of the full image backup using a utility that can be started and run from a CD/DVD. Just in case the registry cleaner breaks of your machine.

  Registry cleaners is that they take a "best estimate" to what is no longer necessary. Sometimes they think wrong. And each vacuum cleaner will clean slightly different sets of places.  If the tool does not provide a way to back up the registry before you start cleaning, do not use it. He is not careful enough.

  If vacuuming offer 'levels' of cleaning, enjoy. Open for more aggressive cleaning, with resetting and long series of normal use between cleanings.

  You are looking for a tool which also makes registry "defragmentation". The registry is a database that get disorganized by additions and deletions. Defragmentation will be re - organize and get rid of a 'lost' space, making it the smallest file, afterwards faster to read.  It is not something you need to do frequently, but since you've never done it in 5 years, it would help, after cleaning registry.

  Another place to find CPU and RAM wasted resources is Windows Services. These are small programs that start at boot time. They run in the background and provide support services to all applications or specific applications.  Many applications services are running even though you don't really need them. You can find information on which you can set by Googling for 'Windows XP hardening'. There are a lot of sites with good information. They call it hardening because by disabling unnecessary stuff, you leave less possible openings for the "bad guys" to the attack.

  Ultimately, I think your best bet will simply bite the bullet and re - install windows and all your applications. It's the best way to restore your computer to almost any performance fees factory. (It is not exactly factory fresh because you need to add a ton of Windows updates).

  Before you re-install, do copy image 1 or more full backups. At least one must be done using a tool that will easily allow you to extract the files. You data backup files separately to make it easier to restore the reinstallation. IE, copy it to a USB key.

  Many "experts" actually expect to, and do, re - install windows every 6-12 months!  I think it's a bit exaggerated, but they swear by it.

  Once you do your re - install, create a copy of the magnified image
  Install a firewall application (before the windows updates)
  Once you do all updates of windows, create a copy of the magnified image
  After that you re-install all your apps, create another copy of the complete picture.

  In this way, in the future, you have more current points to restore your computer to. It will reduce the time you spend to get back to the current configuration.

  On a 5 year old XP machine, you have probably 512 MB - 1 GB of RAM. You might also consider taking in the shop (or DIY) and bump the RAM up to at least 2 GB or better still max out.  The current versions of the applications use much more memory than they did 5 years ago. Even XP will be since he has been seriously corrected since then.

• Is there a way to correct the text changing in Firefox? (installed in Win8)

  After you have installed Windows 8 texts in Firefox keep being with bugs. Tab titles, text pages (especially in FB) have their characters has changed. When I do something important to do, I open IE, which works very well (but I always prefer to work with Firefox).
  Is there something to do about it?

  Here I put some examples (please look at the picture of Firefox):
  http://i45.Tinypic.com/34fjxty.PNG
  http://i48.Tinypic.com/5tw8k8.PNG
  http://i48.Tinypic.com/rjr588.PNG

  Thank you!

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

  Try the pref gfx.content.azure.enabled set to false or if this does not help disable Direct2D by setting the pref gfx.direct2d.disabled true on the subject: config page and leave hardware acceleration enabled otherwise.

  • http://KB.mozillazine.org/about:config

• Is there a way to correct the offset of brush in Photoshop?

  I use Adobe Photoshop 2014.1.0 and get lag terrible brush. I restarted my computer and reopened the file I was working on that and the same problem. I didn't know however, that this occurred during the development group with several layers, or in the past that I met a similar type of lag when using a group (2 or 3 layers) with multiple layer effects. Taking the layer out of the complicated group has resolved this discrepancy of the brush, but in the ideal world there would not happen at all.

  Did you try and follow the steps in the following article: Menus, shortcuts, Lasso tool, or Photoshop constantly run when using a Wacom tablet. Mac OS

• Way to force the minimum height of the page?

  I use Dreamweaver and ColdFusion to my web site.
  
  I run a query from CF on one of my pages and everything is great.
  as long as there are about 20 rows returned, or almost.
  
  Unfortunately, sometimes there are 3 and my page is a header
  and footer with three lines between the two.
  
  Bad news.
  
  How to impose a minimum size for the part of dynamic data from my
  the page, but not to limit the height if there is more data?
  
  THX,
  
  Rick

  Thank you people! I used the approach of Thierry, but either would work.

  My stylesheet now includes this:
  {#mytable}
  min-height: 375px;
  height: auto;
  height: 375px;
  }

  and calls the following:

  Works like a charm in Firefox and IE.

  Thx again,

  Rick

• Is there a way to color the correct main items that allows me to export/save the results as a mp4?

  Is there a way to color the correct main items that allows me to export/save the results as a mp4?  I shot images that I need to spend on another editor for editing, but I want to fix the images colors before putting to sea.  I know you can color correct elements, but is it possible to export the clips to the original position of the source for mp4?  I tried to export a clip using H.264 corresponds to the source, but the result is a half the size of the original file. Your help is appreciated!

  You realize that what you do is a generational loss.  Compression of the images already well compressed!... as well as many other works that used saw the final cut.

  Increase the flow of your export to preserve quality as much as possible.

• I tried exporting a PDF score in word format, but it seems incomplete. Is there any way to export the music score PDF to word correctly?

  I tried exporting a PDF score in word format, but it seems incomplete. Is there any way to export the music score PDF to word correctly?

  Very, very unlikely, unless you export each page in the form of a simple graph, slats, words and everything. You ask too much, especially given that Word is not a music creation application.

• Volume: Best way to decrease the volume for a portion of a clip

  I have an audio clip of speaking me - about 22 minutes. I knew it would be difficult to change because of its length, so I divided into eight sections and each section has recorded independently.

  However, I made a couple of mistakes here and there. So instead of wasting time to record a whole clip again and again until I understand well, I have just re-recorded paragraphs which should be corrected.

  So, imagine a master audio clip named Project1 in setting up first. In the track above, where the third paragraph starts, is another audio clip - Project1-3. I'm trying to understand the best way to kill the volume on Project1 - just for the duration of the third paragraph. So when I listen, I should hear the patch, Project1-3, instead of the main audio, Project1.

  I checked a few tutorials, but I'm a bit confused. I thought it was something I have to do in the Source monitor, by using keyframes, but it does not work too well.

  I put a screen shot in line @ https://www.geobop.com/images/audio.png

  In the upper left corner, you can see where I created a key by clicking on the Volume and selecting the level. It was set to 0 by default, so I changed the value of-20. But when I preview the video, I can still hear the sound and changes in value-20.

  Can someone tell me what I am doing wrong?

  Thank you.

  Rather than apply keyframes to the Volume setting, you will find may be easier to use the razor tool to split the audio clip called "Project1" into several segments in the timeline panel.  Then, disable the unwanted segment (select it in the timeline panel and choose Clip > enable) or raise TI (press point comma), leaving a space.

  Your tracks can be difficult to hear suddenly as the stopwatch for the effect of Volume Audio is enabled by default.  If you look at the effect controls panel, while the audio is selected, you can proceed to the next and previous keyframe to see what 'level' to each key frame.

• Best way to adjust the lighting in the video clips

  Is there a 'best' way to adjust the lighting conditions in a video clip?  I have a clip with terrible lighting conditions and can not remove the scenario.

  While I don't expect a perfect solution, I hope that there are approaches better than those I serve.  If the recommendations include third-party plugins, I would appreciate hearing about them, as well.

  I have been using the corrector, gamma and luminance correction filters.  Adjustments of corrector gamma in higher values, but seems to only work by discrete steps.  So, if the gamma should be entered upwards or downwards in a clip, there is a very visible and sometimes jarring visual effect.  The luma corrector seems to only be able to increase the brightness level (thanks to a combination of all the variables of 5 or 6, including brightness, gain, gamma, etc.) before the clip appears washed out.

  Thank you

  Steve

  All the CC and grading should begin with 'levels '.

  You could then enter the 3 - Way Color Correction.

  You can also watch a more powerful CC such as 2 Colorista

• Best way to update the individual rows of a Table?

  I took a quick glance at a few examples, but did not get a clarification on this.  I am looking to have something close to a listbox control or the table to where I can update just one column of values to line a 1 time per second pace.  I'm looking to display our acquisition of data values in a table or a listbox control.  The single list box seemed to work well for that, but I couldn't use the row headers to list the names of channel beside the channel values.  I thought to link the values of cursor in two areas of list to do this, but did not find any info on it for the single list box.

  I have a few questions:

  (1) I have a 1 d table to where I want to use this data to constantly update the first column (with a multitude of lines) of a table.  I'm looking for the best route to not take too much time for treatment by doing this.

  What is the best way to update the individual rows of a table?   Invoke the node "Value of the cell value"... or is there another method?

  (2) why is that, after each iteration else, row values are deleted?

  Also, for adding additional channels originally arrray... it is better to use the 'Array' subset then the function "Construct the table" or function "Subset of the table" and "insert table"?

  See the attached example.

  Thank you.

  Jeff· Þ· Bohrer says:

  (2) why is that, after each iteration else, row values are deleted?

  Classic race condition.  dump the loop and node-p and just wire the 2D table on the terminal Board. !

  I don't see the race condition.  What I see is the table once the last element has been written for it all run the oil.  I saw looked it with point culminating performance on.

  But I agree entirely with writing to the Terminal.  It is a 1 d array, so you will need to use an array of generation and convert a 2D array in order so that he could write correctly.

• If I get a wrong number when trying to fax, how to go back to correct the number. I do ha

  When I mistyped it, how do I backup to correct the number without having to cancel the fax and start all over again?

  Hi, just checked and it doesn't seem to be a way to do this.

• HP OFFICEJET PRO 6230: Best way to change the settings WIFI on HP OFFICEJET PRO 6230

  Hi all

  Just after some advice about this printer. It's the printer be mobile , so it can be taken with the Member of staff, connected to wifi where they are and then the group they present to can do impressions of him through their ipads (via AirPrint).

  This all works well 'in House' connected to our wireless network. Have set up the printer wireless via the software installed on their laptop computer (with a USB cable to transfer the settings of the printer), but y at - it an EASY way to change the SSID and password wifi when they are there in the area? I know you can hold down the button "wifi" on the printer for three seconds (until the wireless flashes) then hold down the button "WPS" about to access/reuter and they have a link but it's only if WPS is available and that the staff member can access the reuter/access point.

  They will have their laptops with them and USB cable in order to re - set the SSID and password, but seems a bit lengthy to go by "connect a new printer" for each site they visit. Is the right way to do it or there at - it another way 'over easy' I forgot. I guess also here the printer remembers SSID/passwords so that there be set up a time for a given location and then will be "auto-connect" if they come back? Is this correct?

  Any help on this is much appreciated.

  See you soon,.

  Andy

  Not the printer that you want to do.  Here is the Guide of the user for you to read on your wireless options.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6230-ePrinter-series/5390318/model/5390319/manuals/

  You will need to run the configuration each time to connect software.  You could try Direct another wireless to connect to the printer.  You need a printer with a Panel for configuration complete front so you can easily change the SSID.

  Whatever it is, everyone will have to load the software in order to use the printer.  It can automatically connect, but do not count on it.

• Is there a way to make the LPT1 port EPP in Windows?

  Original title: is there a way to make the LPT1 port EPP in Windows?

  I have some parallel setting in BIOS for EPP is selected. Device Manager he calls an ECP port. The device requires PPE runs correctly. Is there a way to make the LPT1 port EPP in Windows?

  Hi RonaldEchols,

  ·         What is the model number of the device (printer)?

  ·         You use what version of BIOS (Basic Input Output System) and the motherboard?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• Error message: this action cannot be completed because the other program is busy. Choose ' switch to ' to activate the busy program and correct the problem

  Original title: server busy

  I get a popup server busy with the message: "this action cannot be completed because the other program is busy.  ' Choose ' switch to ' to activate the busy program and correct the problem.  There are two buttons"'Switch To' and 'Retry '.  Neither fixes the problem and I do not understand what they are talking about.

  Hi adarb,

  1. when exactly you get this message?

  2. what applications do you use when you get this message?

  Method 1:

  You can restart the computer and check if it helps.

  Method 2:

  You try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/310353

  If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.

  After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Smart way to propagate the IP address addy?

  OK, so I got my wrp400 mostly working. The problem I am always face is that incoming calls always have an audio course. They can hear me, I can't hear them... so after a bit of research and testing and reading and manipulation, I found that it worked:

  Setings SIP...

  Substitute VIA Addr--> Yes

  EXT IP--> my.public.ip.address

  I don't have a public static IP, however. So it's not a long-term solution.

  The problem, of course, is that the vocal part of the wrp400 sends its local IP (10.0.0.xxx) on as its public IP address even if the wrp400 full DMZ, all ports for the public IP assigned and are opened through the wrp400. Basically, he doesn't know the IP address of the real world.

  Why this only happens on incomming calls mash (IMO) revealing some automatic detection that allows the external network router to do with outgoing calls, but on specific incoming calls it internally... it shows just the wrong addy.

  Is there a setting that will force the use of external vs internal IP information?

  I'm not sure that differences with a WRP400 and other Linksys/Sipura devices, but the WRP400 is described in the Guide of Administration of ATA even it should be similar to other maps.

  The NAT Mapping Enable parameter causes the adapter to use its external ip address, if this address is known. The key word here is known. If she does not know the external address, it will use the address he knows, the local network address.  There are several ways that the adapter can discover its external ip address.  One way, as you have learned, is to hardcode the address in the IP EXT: field.  This announcement DogFace05 describes two complementary ways:

  I have found that if you have a proxy configured to register and the registration is successful, if he has received = and a rport = on the sip 200 OK message in response to check the adapter will save the external address and port number back if you asked to do in the receipt handle VIA: / handle VIA rport: the Sip tab settings.  Some voip providers do not include these parameters, others.

  You use a server STUN is a common way to determine the external ip address and external port numbers.  With a STUN server adapter sends several messages on the server and the STUN server sends back indicating the port numbers and the external ip address received.  You can use any STUN server that responds quickly.

  With a STUN server, you usually include substitution VIA Addr settings: and RESP to CBC Send Port:

  A good description of the Support of the NAT settings is located here.