height of 100% in a model table

Similar Questions

• problem of adjustment of height of the rows in the tables in CS6

  I read all the debates devoted to setting the height of the rows in the tables and I can't find the answer to my problem.

  I placed a table that was created in Word.  I've done several times, but now I can not adjust the heights of less than 5mm line without losing the text in the line.  I went up to line on "exactly".  As soon as I try to reduce the height of the text disappears, but there is plenty of space above and below the text.   Hoping someone can help.

  Check the cell INSET on the cell options.

• Procedure with the DML statements that insert values from 1 to 100 in only one table and it is matching word equivalent in the other

  Can someone help me create a procedure with the DML statements that insert values from 1 to 100 in a table "abc" and the procedure must connect the numbers into words in another table "xyz" without doing a commit explicitly. "."

  Currently on trial...

  SQL > create table abc (num number);

  Table created.

  SQL > create table xyz (num varchar2 (100));

  Table created.

  SQL > ed
  A written file afiedt.buf

  1. insert all
  2 values of 1 = 1 then in abc (num) (l)
  3 when the values of 1 = 1 then in xyz (num) (to_char (to_date(l,'j'), 'jsp'))
  4 * Select the level from dual connect by level<=>
  SQL > /.

  200 rows created.

  And the result...

  SQL > select * from abc;

  NUM
  ----------
  1
  2
  3
  4
  5
  6
  7
  8
  9
  10
  11
  12
  ..
  ..
  ..
  98
  99
  100

  100 selected lines.

  SQL > select * from xyz;

  NUM
  ----------------------------------------------------------------------------------------------------
  one
  two
  three
  four
  five
  six
  seven
  eight
  nine
  ten
  Eleven
  twelve
  ..
  ..
  ..
  98
  Nineteen eighty
  Cent

  100 selected lines.

• How keep the anchor in the Middle during the change of height and width for extendscript model?

  When I try to change my composition height and width using extendScript, it works but with anchor point at the upper left corner. How to maintain it in the Center?

  My code:

  COMP. Width = 4000;

  COMP. Height = 4000;

  result:

  

  expected:

  

  Thank you

  OK, here is therefore the function for resizing of the model code. I tested several times with anchor points are offset on layers and centered, even with layers that are not yet within the limits of the Model Viewer. I'm sure there will be some users who eventually find something that will break it, but for now it seems to work perfectly.

  app.beginUndoGroup("CompResize");
    var myComp = app.project.activeItem;
    resizeComp(myComp, 500, 500);
  app.endUndoGroup();
  /* TESTING ABOVE */
  
  function resizeComp(compObj, newWidth, newHeight){
    if(typeof newWidth == "number" && typeof newHeight == "number"){
    if(compObj instanceof CompItem){
    var locData, allLayers, allLayersLen, curLayer, clAP, clPos, xShift, yShift, oldCW, oldCH, clH, clW, xOff, yOff;
    pData = new Array();
    cWidth = newWidth;
    cHeight = newHeight;
    allLayers = compObj.layers;
    allLayersLen = allLayers.length;
    oldCW = compObj.width;
    oldCH = compObj.height;
    compObj.width = cWidth;
    compObj.height = cHeight;
    for(var i=1; i<=allLayersLen; i++){
    curLayer = allLayers[i];
    clW = curLayer.width;
    clH = curLayer.height;
    clPos = curLayer.transform.position.value;
    clAP = curLayer.transform.anchorPoint.value;
    xShift = (oldCW - cWidth)/2;
    yShift = (oldCH - cHeight)/2;
    curLayer.transform.position.setValue([clPos[0] - xShift, clPos[1] - yShift]);
    }
    }else{
    alert("Invalid argument(1):\nComp Object required.");
    }
    }else{
    alert("Invalid argument(2/3):\nInteger required for Width and Height.");
    }
  }
  

• SQL DEVELOPER DATA MODELER tables seem to be read-only and make it a symbol of the string in the upper left corner

  I have a lot of tables in my data model.  I have three relational models defined in this file.  In one of the models, all tables seem to be read-only.  They all have a string in the upper left corner of the box.

  I use version control, so that are not archived or something like that.

  How to unlock these items?  Why they seem to be locked?

  Thank you

  Must not have been involuntary - you should have physically moved and dropped the tables/entities from one model to the other.

  If you want to copy them and be able to change in the future, use instead of copy / paste.

• width and height of 100%

  Hello

  I'm building a site a page of Parallax and I want to make each section (anchor) sensitive to the size of the screen, the 100% height and width, it is this possible? How?

  Thank you!

  Mirko

  Hi Mirko,

  Creating a sensitive site using the muse of Adobe is not possible at the moment. But you can check some suggestion in the following post,you can create sensitive sites with Adobe Muse?

• set the height of the rows in the table according to the integer value

  Hello.
  
  jdev version - 11.1.2.3
  
  My requiremnt is that I have an integer input value, when I provide a value for it assumes that 10, then only 10 lines should be visible on the rest of the table should come when scroll us. Basically, I want to adjust the height of the lines on the change in value of my entry value providied.
  
  Thank you

  If the counter returns a number, you can convert entire

  public void button(ActionEvent actionEvent) {
  Number n = spinbox.getvalue();
  table.setFetchSize(n.intValue());
  }
  

  Timo

• Business Model - Table logic Source

  Can someone give me details on exactly when you would follow scenario 1 when modeling a logical table and exactly when you would follow scenario 2, and what is the main difference in behavior between the two. It would help if someone could illustrate with joins of equivalent sql tables.
  
  
  Scenario 1
  
  
  You drag a second physical column of table on the logical table. This causes an additional field will appear in this list of logical tables in columns from another table to the original and causes a second table to appear under the original table in the source folder.
  
  
  Scenario 2
  
  You drag a second physical table to the existing source of the logical table of a logic table. The source of physical table appears on the surface, the same as before, but when you examine its properties you will see that the second table was joined to it.
  
  
  Thanks for your comments,
  
  
  Robert.

  Scenario 1
  ---> It would be more economical and BI server is free to use his Intelligence to peak sources based on the extraction of columns in the criteria tab provide you do know the sources using the content tab.
  In general, we're going to do this is when:
  Extensions of dimension
  Fragmentation
  Global table

  Scenario 2
  ---> In this case we force Server BI go as we said (which forces to use joins) and can be intelligence not to use BI
  In general, we're going to do this is when:
  Of fact extensions
  10 g; What measures are based on certain conditions based on the dimensions, so we might have to add/map them and make
  version of Siebel Analytics we used to go the aggregations based on the logical columns, it is not more than 10 g and 11 g.

  Hope this helps

  Published by: Srini VIEREN on 21 February 2013 09:17

• Reduce the height of a row or a table (was: so this does not not the case...)

  I'm a guy who likes to understand things for me and have browsed the web for the last 2 days, but can't seem to even approach an answer. I am extremely frustrated.

  Where to insert a table, or import a spreadsheet or tabular information, I cannot draw down the line or table height, beyond a some point. No matter what I try: CSS, properties of cell, manages... nothing. Help, please.

  I have no problem setting the width of tables and cells, but cannot, for the life of shorten me the line height to where I need it.

  In addition, each tutorial I read/seen that inserts a table shows the newly imsetred table with a height of normal line... barely higher then the text itself. In mine, the height of my cells is perhaps 5 times more than what I need it to be. I can't diminish for the life of me.

  The Web page is www.yptusa.com/btp_itinerary.html

  Thanks in advance for any help that anyone can give me.

  JR

  In http://www.yptusa.com/CSS/btp_itinerary.css

  * {

  padding: 0px;

  margin: 0px;

  background-repeat: no-repeat;

  height: 100px;

  background-position: center;

  background-color: #f5f5f5;

  }

  the picker wildcard (*) applies to each tag and it contains the definition of the cells in table to 100px from the top.

• How to keep the source of updated model table?

  Hello
  
  
  Database MS SQL source-
  Target - Oracle
  
  
  I have a reverse engineering source and tables targets say 'src_table' and 'trg_table' respectively. The data are available in src_table. I have implemented an interface named "Load_Interface", which loads the data from the source of 'src_table' to
  'trg_table '. My Interface works very well. But I have one query, assume that my source (in the database not in ODI) update table.
  
  Should I do reverse engineering on the source model again to update the 'src_table' in the model of ODI?
  
  Because I want to run this interface on the daily basis. Is it possible to src_table automatically update once updated the table in MS SQL?
  
  Thank you
  Shrinivas

  Hi Shrinivas,

  Is not mandatory, you can run the interface and get settled.

  Some of the approach that you can follow,

  1. use IKM incremental update to capture him and the calendar frequently.

  2. use the CDC to capture these modified from the source data.

  http://odiexperts.com/tag/simple-CDC

  3 use the ODI utilities to trigger the interface once new data has arrived (OdiWaitForLogData, OdiWaitForData etc.)

  Thank you
  Guru

• CS2 automatically adjust the height of the content in the table line?

  Hi guys, I use CS2 and I have a table with many pages. I need to be able to have the height adjust automatically the content of the tables. Data are unfortunately not compatible so that some cells have 2 rows of content, others 8.

  • Automatically, adjust to the content is not available.
  • I have tried to adjust the height lines then "table" > "distribution lines", but obviously it's not good that some are too crowded, others too spacious.

  Any suggestion is appreciated.

  I think you're stuck to resize the width manually at this point...

• JTable with custom column model and model table does not display the table header

  Hello
  
  I create a JTable with a custom table model and a custom column template. However the table header is not displayed (Yes, it's in a get). I have narrowed the problem down in one compilable example:
  
  Thanks for your help.
  

  import javax.swing.*;
  import javax.swing.table.*;
  
  public class Test1 extends JFrame
  {
       public static void main(String args[])
       {
            JTable table;
            TableColumnModel colModel=createTestColumnModel();
            TestTableModel tableModel=new TestTableModel();
            Test1 frame=new Test1();
  
            table=new JTable(tableModel, colModel);
            frame.getContentPane().add(new JScrollPane(table));
  
            frame.setSize(200,200);
            frame.setVisible(true);
       }
  
       private static DefaultTableColumnModel createTestColumnModel()
       {
            DefaultTableColumnModel columnModel=new DefaultTableColumnModel();
            columnModel.addColumn(new TableColumn(0));
  
            return columnModel;
       }
  
       static class TestTableModel extends AbstractTableModel
       {
            public int getColumnCount()
            {
                 return 1;
            }
  
            public Class<?> getColumnClass(int columnIndex)
            {
                 return String.class;
            }
  
            public String getColumnName(int column)
            {
                 return "col";
            }
  
            public int getRowCount()
            {
                 return 1;
            }
  
            public Object getValueAt(int row, int col)
            {
                 return "test";
            }
  
            public void setValueAt(Object aValue, int rowIndex, int columnIndex)
            {
            }
       }
  }

  Published by: 802416 on October 14, 2010 04:29
  added

  See http://download.oracle.com/javase/6/docs/api/javax/swing/table/TableColumn.html#setHeaderValue (java.lang.Object)
  When the TableColumn is created, the default headerValue is null
  So the header ends up rendered empty label (probably of size 0 if the JTable calculates its size of header based on the size of the default rendering tool).

  It worked:

       private static DefaultTableColumnModel createTestColumnModel()
       {
            DefaultTableColumnModel columnModel=new DefaultTableColumnModel();
                  TableColumn col = new TableColumn(0);
                  col.setHeaderValue("Header Title");
            columnModel.addColumn(col);
                  return columnModel;
       }
  

  Published by: jduprez on October 14, 2010 14:09
  Beaten by a fraction of a second!

  Published by: jduprez on October 14, 2010 14:10
  OK, by a split of 17 minutes, specifically: o)

• Copy of model table

  I copied a table to a page template to use the page without the model. Everything is editable, but every time I try to save I get a box that says "Save as template". I don't want this page to be a model, so I come back and save you... but I have to do every time I save? How can I remove the model info?

  Look at the source code and remove the comments of special model
  around the table. I don't know what they look like exactly, but
  You'll probably know them when we see them.

  Also analyze the rest of the page to check that there are no other reference
  for the model.

  --
  James M. Shook
  http://www.jshook.com

• New column DB has to refelect model table

  Hello
  Adds a column id in one of my intermediate table, will that do directly in my model what I already hit the table
  
  Is it possible to update automatically or I need to come back again to this table?
  
  
  I can add the column using insert a column with the same name and data type as in DB. Which will reflect?
  
  Thank you
  Saichand.v
  
  Published by: André Varanasi on August 27, 2010 10:44

  Hi Andre,

  Yes, you're right.

  Red X indicates the column name is changed (ideally when the metadata column is not there)

  Green M indicates the column type/length of the data is changed (ideally, changes in the existing metadata column).

  You can also open the data store go on the columns tab and click on "reverse" that will automatically extract the changes to ODI.

  Let me know if you are facing problems.

  Thank you
  Guru

• How to load 100 million lines of Table Partioned

  Hi all
  
  I have a job in the application of VLDB.
  
  I have a Table with 5 columns
  For ex - A, B, C, D, Date_Time
  
  I CREATED THE (DAILY) RANGE TABLE ON COLUMN (DATE_TIME) COMPARTMENTALIZED.
  
  CREATED THE NUMBER OF INDEXES FOR THE EX,
  INDEX ON A
  COMPOSITE ON DATE_TIME, B, C
  
  REQUIREMENT
  --------------------
  NEED TO LOAD ABOUT 100 MILLION RECORDS IN THIS TABLE EVERY DAY (IT WILL LOAD VIA SQL LOADER OR TEMPORARY TABLE (INSERT INTO ORIG SELECT * TEMP)...)
  
  QUESTION
  ---------------
  TABLE IS INDEXED, SO I NEVER AM NOT ABLE TO USE SQLLDR FEATURE DIRECT = TRUE.
  
  SO I WOULD LIKE TO KNOW WHAT IS THE BEST WAY OF AVILABLE TO LOAD THE DATA INTO THIS TABLE?
  
  Note--> don't FORGET not I can't DELETE AND CREATE INDEXES every DAY because of the HUGE AMOUNT of DATA.

  LiangGangYu wrote:
  Exchange partition would be your best friend in this case, because all the existing or to-be-bulit indexes are partitioned locally.

  Daily load,
  1. create a temporary table, ex_temp, with the same structure as the target table.
  2 load direct - sqlldr or external tables - path in the temporary table. You can do all the stuff of fantasy here to get the best performance without impact on the target table, 'ex '.
  3 build all indexes on the temporary table
  4. the swap partition the temporary table with the correct partition of the table target. This is a DDL, update of metadata. Very fast.

  ALTER TABLE CALL
  EX_partition PARTITION EXCHANGE WITH TABLE EX_temp
  INCLUDING INDEXES
  WITHOUT VALIDATION.

  Please see the documentation for more details. for example http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/partiti.htm#sthref2762

  Hello

  Do not forget that after the swap operation you should be collecting stats partition
  and if you have a lot of multiple queries partition adjust a stats table too.

  Kind regards
  Marcin Przepiorowski
  http://oracleprof.blogspot.com/