problem of adjustment of height of the rows in the tables in CS6

Similar Questions

• Setting the row height of the table with CSS

  I'm trying something for a project I'm working on. I created a table that resembles the creation mode, but when I see him live or in a browser, the elements are spaced too far. It seems that the height of the table, it is not this design point of view shows that it is. How can I change the attributes of tables to adjust the height for items will be close together and whitespace not so? Here's what I did:

  	MONDAY Take advantage of our 2 for 1 special dinner in the entire menu (up to $8.95 discount)
  	TUESDAY House margaritas or any kind of beer for only $2.95!
  	WEDNESDAY Enjoy 2 dinners for $20.00 from our special menu (This special offer cannot be combined with any other offer)
  	THURSDAY Ladies Night! For only $5.00 martinis
  	FRIDAY Happy Hour at the bar alone 4-7 PM
  MARIACHI BAND SUNDAY LIVE!

  I'm sure I'm missing something stupid, but any help will be appreciated. Here's the real link in my browser:

  http://ymimusic.com/delete.html

  Thank you very much!

  It's the abbreviation CSS.  Rather than express margins and padding with 8 lines of code like this:

  {#divName}

  top of the margin: 12px;

  padding-top: 12px;

  right margin: 12px;

  padding-right: 12px;

  margin-bottom: 0px;

  padding-bottom: 0px;

  left margin: 12px;

  padding-left: 12px

  }

  You can get exactly the same thing with just 2 lines of CSS code shortcut.

  {#divName}

  margin: 12px 12px 0 12px;

  Padding: 12px 12px 0 12px;

  }

  Nancy O.

• Adjust the height of the table row

  I have several InDesign files with linked tables .xls. About 150 paintings by file and these files updated very frequently (add and remove lines, etc.).

  And I was looking for a plugin that could do and told him it should be scriptable.

  And since I'm not that deep in the script stage, does anyone know of script that can do the following?

  What I would like is a height of a row of empty cells to 7pt.

  The height of a cell with content to have a minimum of 14pt, unless this cell contains more than one line, it should increase 7pt until it can contain any content (and decrease by 7pt if a line is removed in an update of the .xls file). The reason why we need 7pt increments is several lines often does not fit to a 14pt cell height. And most designs call for a grid to work in.

  A cell with a certain style of cell to have a height of 21pt.

  Hope the attached example helps to clarify the issue.

  

  We also have cells that must be a fixed height (subtotal and high-value)

  In the light of the foregoing, I mean cell styles (subtotal, high-value)

  Oops. I guess I should have checked, sorry!

  Add ', styleName' in the var statement on line 5 and then add this to the line 13, before the "If (initial) {': }"

  
  

          styleName = row.cells[0].appliedCellStyle.name;
          if (styleName === "top-value" ||
               styleName === "subtotal"
          ) {
              continue;
          }
  

• How to unlock a row height of the table?

  I use the same table (40 lines, 20 columns) in a quarterly publication for at least 5 years. While I need not change it very often, I never had a problem in the past. I just upgraded to CS6, and now I can't change most of the height of the rows to be more than 0.2 ".  There are three lines which are greater than. 2 "and I still can resize them. But the 37 other lines can only be reduced in height, has not increased. I tried the height adjustment to the words 'at least' instead of 'Exactly', without effect. I checked all my settings options of the Table and can't find anything to change.  I use dozens of tables in this publication and has no problem resizing of rows or columns in the rest of them. Any idea what's going on here? All I did to lock this particular table, of course, I won't have to accidentally do to all the others. Thanks in advance!

  Click on the "Table" then "cell Options" menu choose "the rows and columns" and in the white box next to the word ' Maximum: "type a value greater or increase the value of arrows up and down. It's you if you want to type a maximum value that you do not want to exceed or type a very high value such as 20 "so that you can resize freely.

• ADJUSTMENT of height of the text input element

  Hi all

  I use Jdeveloper 12 c on Microsoft windows using Google Chrome.

  I created an element of text on the jsf page.

  but the height of the text element is very small.

  I want to make the size of the largest input text element.

  <af:inputText id="first_name" placeholder="First Name"
                                                inlineStyle="vertical-align:baseline; font-size:medium;"/>
  

  kindly guide me.

  Thank you

  Hi maahjoor

  You can set the height of the text in its content-style - height: 25px;

  or you can also set padding for thatsee that's how you can make your greatest text entry

• problem with image that disappears into the table-

  It's totally weird and I can't understand why it's happening.
  
  I'm new to DW8, even if I used a much older version of DW a lot.
  
  It doesn't matter how to create the header for http://www.amafca.org/convertedindex.htm, the image of the banner of the very top is getting stripped when I put the page online for tests.
  
  Currently, I use a table, where the img src is correctly listed as data in the table for that cell. Test perfectly locally. Can I use ACE FTP 3 to load the page on the test site. All graphics are where they are supposed to be. BUT... the top of the banner is not displayed! Looking at the source code, the "img src" link so that the cell is completely empty - the code was stripped of the page!
  
  How is that possible? ACE FTP is it? How and why? (I never even heard of a program ftp stripping code!)
  
  I guess I have to just move on and wading in get the DW set up ftp in order to use it for this test page and see if the info is always stripped. But everyone knows this sort of thing happening before?
  
  Thank you
  
  PAM to amafca

  I guess you run Norton and it freezes the image before he gets to the browser because you called banner. Rename it to something else and see if that helps. I can see the banner very well.

• Reduce the height of a row or a table (was: so this does not not the case...)

  I'm a guy who likes to understand things for me and have browsed the web for the last 2 days, but can't seem to even approach an answer. I am extremely frustrated.

  Where to insert a table, or import a spreadsheet or tabular information, I cannot draw down the line or table height, beyond a some point. No matter what I try: CSS, properties of cell, manages... nothing. Help, please.

  I have no problem setting the width of tables and cells, but cannot, for the life of shorten me the line height to where I need it.

  In addition, each tutorial I read/seen that inserts a table shows the newly imsetred table with a height of normal line... barely higher then the text itself. In mine, the height of my cells is perhaps 5 times more than what I need it to be. I can't diminish for the life of me.

  The Web page is www.yptusa.com/btp_itinerary.html

  Thanks in advance for any help that anyone can give me.

  JR

  In http://www.yptusa.com/CSS/btp_itinerary.css

  * {

  padding: 0px;

  margin: 0px;

  background-repeat: no-repeat;

  height: 100px;

  background-position: center;

  background-color: #f5f5f5;

  }

  the picker wildcard (*) applies to each tag and it contains the definition of the cells in table to 100px from the top.

• Problem opening files or registration for the Web in CS6

  Have a current last Mac OS X - I used the CS6 programs for years - just recently tried to open a file in PhotoShop and Illustrator and see only a window pop up that sound - black and white.  Can close this window, but can not get display open later.  Program to quit smoking and the same thing happens again and again.

  Tried to restart the computer, running "first aid" - all to nothing does not.

  The latest version of Mac OS X is El Capitan (10.11). It is not compatible with the CS6 software. It is out of use and will never be updated.

  You are advised to return to a Mac OS X operating system to address precedent, or upgrade of creative cloud.

• problem with general total display of the table in the dashboard

  Hello I am new in OBIEE 10 g
  
  I have a case in my dashboard like this table. table with 2 columns representing the population n date.
  
  
  I want the total general show the value of the last population. in this case: the population in 31 Desember 10 (10,251,378). I try to use agregate max but it shows the max value of population. in this case means 10,302,388.
  
  How can I make the big show total population of 31 Desember 10?
  
  Help, please
  
  thx a lot
  
  Published by: oracleBIDeveloper on January 14, 2011 03:10

  Hello

  Take a look: http://bischool.wordpress.com/2009/08/10/fixing-a-report-totalling-function-must-be-in-a-leaf-query-block-hy000-error-in-obiee/

  Thank you
  Saichand.v

• Problem with insertion of '0' in the table

  Hello
  I have a table called 'TEST' and columns "column1", "column2". When I try to insert the '0' value in Column2. It is the display with a NULL value.
  
  Here is an example
  
  Create table TEST (varchar2 (20) Column1, Column2 number (10,2));
  
  Insert TEST values ('YYYY',' 6.0 ');
  Insert TEST values ('BBBB', ' 0');
  insert into TEST values ('CCCC',' 8.0 ');
  Insert TEST values (Davis ', '0');
  
  Select * from TEST;
  
  RESULTS:
  
  Column1 Column2
  ABDELKADER 6
  BENAMER
  CCBC 8
  DELALANDE
  
  
  expected result:
  
  Column1 Column2
  ABDELKADER 6.0
  BENAMER 0
  CCBC 8.0
  DAVIS 0
  
  Published by: user11872870 on September 23, 2010 13:51

  Try:

  insert into TEST values ('AAAA',6.0);
  insert into TEST values ('BBBB',0);
  insert into TEST values ('CCCC',8.0);
  insert into TEST values ('DDDD',0);
  

  Note: No. ' on the numeric column.

  HTH
  Thomas

• How to control the height of the Vertical slider

  I use a slider to control the zoom of the camera in a ForeignWindowControl but the slider is too big, how adjust its height? The docs say preferredHeight does not make a difference then what? I currently have my navigationpane back bar overlapping the cursor that does not look very good.

  Not quite sure, but one displayed vertically or horizontally, have you tried preferredWidth?  In other words, even if it is displayed vertically, he could still be considered as its width...

  -Edit-

  ... or maxWidth as the case may be...

• CVI suggested help update on 'programming with the Table controls.

  Hello

  May I suggest adding a sentence to the chapter 'Programming with the Table controls', 'Creation and deletion of cells' section help of CVI.

  After the sentence "use the following functions to control the number of rows in a table control...". "I would like to add a suspicion that the number of lines is also affected by (programmatically) adjustment of the height of the table.

  Now that I've discovered, it's obvious ;-)

  Hi Wolfgang,.

  I think you might be misunderstanding this sentence in aid. It does not refer to the size of the table, in regard to the number of lines go in the table. It is in fact the number of real lines exist in the table. And the total number of rows in the table is absolutely not affected by the height of the table.

  Luis

• Increase in size of database extremely - need to monitor the size of the table

  Hi all
  
  I need help in the growth of the follow-up tables. It's that the database grows enormously from 192 G at 200 over five days, representing 5% increase in database size. The general scenario is that is that the db is growing 20% annually, but this increase in a week will cause future hardware problems.
  
  Please advice to find the tables that is still growing.
  
  Thank you
  DBA Junr.

  Hi Georges s/n, do not know if this will help you now, but I did something like this on a daily basis for about 3 years. Literally, I have the size of each segment on a daily basis for this time and can go back in the graphic history of growth. If I had the question you ask the subject that I would be able to tell you exactly what segments are developed. If you need this on a smaller time frame, you can change the data stored in the column "created_date' to all the hours I guess.

  Anyway, here's the create statement.

  create table db_segment_history
  (
    db_segment_history_id     integer not null,
    owner                 varchar2(30),
    segment_name          varchar2(81),
    partition_name        varchar2(30),
    segment_type          varchar2(18),
    created_date          date default trunc(sysdate) not null,
    tablespace_name       varchar2(30),
    header_file           number,
    header_block          number,
    bytes                 number,
    blocks                number,
    block_size            number,
    extents               number,
    initial_extent        number,
    next_extent           number,
    min_extents           number,
    max_extents           number,
    pct_increase          number,
    freelists             number,
    freelist_groups       number,
    relative_fno          number,
    buffer_pool           varchar2(7)
  );
  
  create sequence db_segment_history_seq cache 1000;
  
  create unique index xpkdb_segment_history on db_segment_history( db_segment_history_id );
  
  alter table db_segment_history add ( constraint xpkdb_segment_history primary key ( db_segment_history_id )
  using index );
  
  create unique index ak1db_segment_history on db_segment_history(
       owner, segment_name, partition_name, segment_type, created_date );
  
  create trigger db_segment_history_bir
  before insert on db_segment_history
  for each row
  begin
       select     db_segment_history_seq.nextval
       into     :new.db_segment_history_id
       from     dual;
  end;
  /
  

  This is the insert / select that I use.

  insert into db_segment_history(
       owner, segment_name, created_date,
       partition_name, segment_type, tablespace_name,
       header_file, header_block, bytes,
       blocks, block_size, extents,
       initial_extent, next_extent, min_extents,
       max_extents, pct_increase, freelists,
       freelist_groups, relative_fno, buffer_pool )
  select  owner, segment_name, trunc( sysdate ),
       partition_name, segment_type, tablespace_name,
       header_file, header_block, bytes,
       blocks, bytes/blocks block_size, extents,
       initial_extent, next_extent, min_extents,
       max_extents, pct_increase, freelists,
       freelist_groups, relative_fno, buffer_pool
  from    dba_segments
  where   tablespace_name in(
            select tablespace_name from dba_tablespaces where contents = 'PERMANENT' );
  
  commit;
  

  I hope this helps.
  Michael Cunningham

  Published by: Michael C on February 21, 2012 14:19

• fill in the data of the table

  Hi, I have the problem on coding when I use the table to display the data in the table. I don't know what Miss me in the code, data appears only in the first row and second row appears empty. I have spent a lot of time to find the solution but I am not successful.

  I need your help. Thank you.

  This is the encoding that puts the button: click

  var part1 = new Array ("A", "3", 78, 9)
  var part2 = new Array("E","2",45,8);
  var part3 = new Array("C","1","14",9);

  var b = new Array("",part1,part2,part3)

  var a = new Array()
  a = form1.page1.Table1.Row1.TextField1 [0];
  a = form1.page1.Table1.Row1.TextField2 [1];
  a = form1.page1.Table1.Row1.TextField3 [2];
  a = form1.page1.Table1.Row1.TextField4 [3];
  
  a = form1.page1.Table1.Row2.TextField5 [4];
  a = form1.page1.Table1.Row2.TextField6 [5];
  a = form1.page1.Table1.Row2.TextField7 [6];
  a = form1.page1.Table1.Row2.TextField8 [7];
  
  a = form1.page1.Table1.Row3.TextField9 [8];
  a = form1.page1.Table1.Row3.TextField10 [9];
  a = form1.page1.Table1.Row3.TextField11 [10];
  a = form1.page1.Table1.Row3.TextField12 [11];
  
  for (var i = 0; i <.) Length; i ++) {}
  for (var j = 0; j < b.length; j ++) {}
  a [i] = b [j] [i] .rawValue;
  }

  }

  Hello

  Try this.

  var i = 0;
  for (var j = 0; j)< b.length="" ;="">
  for (var k = 0; k)< b[0].length="" ;="">
  a [i] = b [j] [k] .rawValue;
  i ++ ;
  }
  }

• Compel the tables?

  Hi guys

  I'm having a problem with the maintenance of my paintings to 1 particular place.

  You see, I use tables for the design of my sites in dreamweaver, so I'm doing the table of 1 provision and several tables in this table.

  Now I have a table with my buttons in them, but it is a picture in a table that is the layout of the site.

  The buttons are fine when the height of my site is 800px, but when I add more things in the increase of the height, the table goes into movement centered according to height, now I don't want that to abandon its same place you the height of the table increases.

  Can someone help me?

  You must insert your cursor inside the table cell that contains the table of the bar of navigation and the valignment to 'top' through the property, the value Inspector

  the code will look like this:

  As for your text, you are apply styles to each section of text, if you continue to do this, you will end up with lots of style10, style11 etc., which is not how to use a style sheet ;-)

  Text must be set within the

  That is, tags: paragraph tags and you then style the

  tag

  for example: it is the text inside a paragraph: it will then style the text with the paragraph style by default unless you create a style for all paragraphs.

  Collaboration for equity in health in education and research (CHEER) is a research team formed in 2003, composed of one representative of each of the universities in South Africa with a Faculty of health sciences, all are involved in education focused on the community or health in rural areas. The issue of original research focused on educational strategies most appropriate that would support the health graduates choose to practice in rural and underserved areas of South Africa. Work done so far has given place to two publications and two more to be

  Select the section of text and with it highlighted in the property inspector and check the Format box and select "paragraph."

  So for styling the text inside of the

  tags, you can use something like this: (it goes in the header of the document, in order to replace the rest of your styles as style10;

  {p}

  do-size: 12px;   / * Insert here him no matter what size you need for text * /.

  color: black;

  line height 1.8em;  / * spacing between lines of text * /.

  }