Helix Gen 1: how to activate EUFI after new installation?

Similar Questions

• How to activate Windows after the 3-day grace period?

  HOW TO ACTIVATE WINDOWS AFTER PRESCRIBED PERIOD AGAIN?

  I forgot to activate my windows again after only three days in advance?

  I use a dial connection using a USB plug. It's SmartBro, location Philippines. My number is * removed *.

  I could not activate using the internet because I couldn't connect my dial-up access. I got a prompt to automatically connect bur that he had failed.

  I don't have a landline.

  I tried the phone activation. I got yhis installation ID:

  Can I have the confirmation through your answer ID? Give your could give me, this activates my windows again, even without an internet connection yet.

  Without this activation, I couldn't connect to internet...

  My activation key is: * delete *.

  Currently, I'm in a café of inet, I would be grateful if you could give me a solution to my problem.

  My email is: * address email is removed from the privacy * or * address email is removed from the privacy *

  Hoping for your quick response.

  Thnak you.

  Chris Maypa

  Hello

  Check out the link and follow the steps.

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890

• Get the popup to the activation of Windows 7 after new installation

  I used my actual activation key after a new installation (not an upgrade) of W7 on full CD/DVD with sticker. It seemed to work but I keep getting harassed to activate because the key is supposed to be invalid. Experiment with the options I tried to "Buy a new key online." which took me to a site Web of MS page that CITES "because it is installed on your Windows PC is authentic", etc. Something is wrong, but what?

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com

• Symbol ban after new installation on new SSD

  Hello

  A few months ago, my original HD failed (MacBook Pro (13-inch, mid 2012)).

  I decided to replace it myself with a SSD instead.

  the thing is, every time you start, I get the symbol ban for a few seconds until sometimes for hours, but once the start is done - everything works perfectly.

  tried to replace the disc SSD 3 times now - the same result after each new installation of recovery of the internet.

  Currently, using SanDisk Ultra II 240 GB.

  Any suggestions?

  Thank you!

  The symbol you see means that the computer did not find a bootable system disk and sometimes occurs when you have not set up a default startup disk. Go to System Preferences, and then select Startup disk. You should see your SSD in the window. Select it after you unlock the preferences.

  The strange thing is that, if this is your problem, it must be solved in seconds - certainly not hours. This would suggest there is something more complex. You say that you tried to replace the SSD 3 times. Different drives? Different manufacturers?

• missing drivers after new installation of w7 Ultimate 64 bit on HP Pavilion

  The title says:

  "pilots missing after the new installation of w7 Ultimate 64 bit on HP Pavilion.

  It is a Pavilion dv6 1341eo.

  The missing drivers from, said hwat Device Manager is:

  Base system device

   

  " Bus PCI 6, device 0, function 1 "

  Hardware ID:

  PCI\VEN_197B & DEV_2382 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

   

  Peripheral basic system (2)

   

  " Bus PCI 6, device 0, function 3 "

  Hardware ID:

  PCI\VEN_197B & DEV_2383 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

   

  Peripheral basic system (3)

   

  " Bus PCI 6, device 0, function 4 "

  Hardware ID:

  PCI\VEN_197B & DEV_2384 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

   

  Unknown device

   

  ' on Intel (r) "ICH9M LPC-interfacecontroller - 2919".

  Hardware ID:

  ACPI\ENE0100
  * ENE0100

   

   

   

  Anyone please... Here is the driver for these devices?

   

   

   

  Hello:

  The first group of ID you posted with 197B is the JMicron card reader.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-75661-1&CC=US&DLC=en&LC=en&os=4063&Product=4049954&sw_lang=

  The other is the ENE CIR receiver that needs a driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-75664-1&CC=US&DLC=en&LC=en&os=4063&Product=4049954&sw_lang=

  Paul

• How can I perform a new installation if I don't have an installation or a backup disk. Vista is on my laptop when I bought it and there is no installation disc.

  How can I perform a clean installation on a laptop if I don't have an installation disc? Vista Home Premium was already installed on the laptop when I bought it. Somehow, all of my documents have disappeared and by clicking on the icon start shows not all programs as it did before. The only way that the broadcast of programs is by placing the arrow on "all programs". How this can be corrected and how do I recover lost files?

  Hello

  you do not say what led to losing you your documents

  This would apply to you? :

  read the information at the bottom of the below link about what makes this malware hide your data files and the cure for it regarding

  Read article 17

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

  also follow the correct for that malware removal steps, just to be safe, let's

  _____________________________________________________________________

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _____________________________________________________________

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I download a new installation of Acrobat 7 to another computer in Win7

  I am running Acrobat 7 on my old desktop and now bought a new system. I do not have the original installation disks, but it is a saved copy and appears in my Adobe.  Can I download a new installation and then disable the old installation and activate the new installation on the new computer?

  Thank you

  Acro 7 is not compatible with Win 7, in any case, what you are doing would be a waste of time. Upgrade to Acrobat X or for time using reader and another creation of PDF and editing tools.

  Mylenium

• HOW TO ACTIVATE WINDOWS AFTER FORMATTING COMPUTER?

  A few reasons I had to format my laptop because of which I lost my windows genuine, but I still have the product key. So is it possible to reactivate authentic windows of this product key on the same computer laptop?

  Hello Rish

  Right click on computer > properties at the bottom of page is activate windows now, it will fail the call number to the 1-800 number, request to follow.

• PS CS 2 not understand how to activate it after the hard disk crash

  I reinstalled it, had to install PS worm. 6 before im able to put in my upgrade to PS CS2

  CS 2 tells me that I have only 26 more days to work the demo before the end of it

  will come.

  What can I do to activate it?

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

• 405 proDesk G2: how to activate Windows after replacement of the motherboard

  I upgraded my G2 405 ProDesk to Windows Pro 10 of the original OEM Windows 7Pro earlier in the year.

  Last week, is not the motherboard.  The PC is still under warranty, so HP arranged for a replacement on place of the motherboard.  It worked well, except that windows is activated is no longer.  I called Microsoft with the installation ID in order to get a re-activity windows confirmation ID.  Microsoft said that I need the original license key.  I don't have that because it's an installation OEM from HP with, arguably, the key in the BIOS that has been replaced.

  So what I do now?  HP will issue me with a license key given that the PC is still under warranty?

  Just to clarify, the license was Windows 8.1 Pro downgraded to Windows 7 Pro, so there was a key Windows 8.1 on the original BIOS but the PC came with Windows 7.

  Your post got me thinking, however. I ran the FirmwareTablesView.exe application on the new motherboard and found a license key in the BIOS.  Then, I went to change the product in Settings\Update & security key and enter the key of the new BIOS.  Activation was then successful.

• How to activate windows after upgrading my memory and HDD, motherboard?

  I built my system with a full copy of Windows Vista four years ago.  Since then, I've bought a 3 license upgrade to Windows 7 Home Premium.  I've improved this system and a laptop with this copy.  Now, I did a major update on my main system, replace the card mother, cpu, memory, and hard drive.  I made a new installation using the disks in windows 7, assuming that he asked to give me my Vista drive, but he never did.  The installation is completed successfully and now, three days later, I received an activation error.  The automated phone system didn't work either, saying: I did not meet licensing requirements.  What can I do?

  Try the phone activation, do not meet all the guests until given the opportunity to speak to a real person

• How could I install after the Installation of Vista Toshiba Utilities?

  Ok
  This may seem a bit silly. I currently have XP and I intend to upgrade to Vista. I was wondering how I could reinstall all utilities like ConfigFree, Touch and launch, etc,... after I have installed Vista. The recovery CD only works on XP, right?

  Help, please.

  You are right. Tools & utilities are not the same for Windows XP Home and Vista edition. First of all, it will be interesting to know what model of laptop you have. You must know that all portable Windows XP Home edition are not Vista support and if you have a laptop without Vista capable sticker you will not be able to find all this stuff for your laptop.

  Please post your model of laptop. Maybe someone can give you more information on the Vista support.

  Good bye

• How to add Photos after the installation of the El Capitan

  I got Lion before I just installed El Capitan.  When I installed the iPhoto application has a circle with a line through it.  When I went to update to iPhoto, but I get an error that says "Update not available with this Apple ID" this update is not available for this Apple ID either because it was bought by another user or the elements has been refunded or cancelled. "That is not true.  It's the ID only I know that I and I got this computer since 2008, and iPhoto has been on it all the time.

  What should I do? I am not tech savvy, I back up using time machine but not safe, where the photos are on the time machine.

  I thought that maybe I should move to Photos, but I can't find this app to download either.  I thought that if I got this app, it would transfer my pictures of her.

  What should I do? I'm not the most tech savvy person so it's very stressful, because I don't know how to access my 10,000 photos.

  Any help would be appreciated.

  Photo is part of the operating system is installed on your system already - it is the white circle filled with a ring of smaller colored on the bench of the accused - circles and is located in your Applications folder

  LN

• How to reinstall Acrobat after the installation of new SSD

  My SSD has failed and I have installed a new drive.  Acrobat is in the Adobe registered in 2014 online account, but I can't see any link to install the licensed software on the new drive in my laptop?  The old drive is dead.  Appreciate some guidance.

  What version of Acrobat? What operating system?

  Try to download from

  Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  Download Adobe Acrobat products. 9, 8

  Install and enter your serial number.

• How to get CC after the installation of CC2014

  Here at work all our workstations have been upgraded to CC when that came out. CC2014 then when THAT came out. Since then, we have added a new workstation and it seems we can only install CC2014 on it and not the first CC version. We work with many versions on a daily basis (all CS3: CC2014), so we have to CC on this workstation as well. But when you go to the creative cloud Panel is simply not available.

  Get off at the Cloud Desktop App Designer. Click the Apps scroll up until you see the filters & Versions (or applications) on the right. In the menu choose the previous Version.