How to activate Windows after the 3-day grace period?

Similar Questions

• How to validate windows after the disk crash hard with or without pay for a new disk

  Hello

  Thanks for any help. My hard drive crashed after it overheated. Each attempt I used to reinstall or use a backup version failed because my hard drive could not be found. This disc that came with my computer was so useless. I had to go to a computer repair shop & buy a new CD with Windows 7 on their part. Now, when asked to reactivate it, it says my code is not genuine and is not even from America. I read in another message that a person would buy a CD to their computer manufacturer. I do now? I have the dang code for my original windows installation. It is right on the side of my computer Tower, but obviously it does not work as disc of the repair shop has a different code.

  Now that my computer is totally fixed, is it possible for me to try and reinstall my windows with the repair disc supplied with my computer when I bought it? Alternatively, I can reset my computer to its factory installation? Are these files on my computer since I have used another drive? I'm guessing that probably not. Thanks again for any help.

  Statistics of the computer:

  Windows 7 Home Premium 64-bit

  Hard drive: 1 TB

  Memory: 3 GB

  Processor Intel Pentium E58

  I'm pretty computer illiterate, so if you tell me to go to a certain place and type a number of keys, I won't be able to understand it, even with the simplest explanations... I'm sorry.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• How to activate windows where the key code is how to make one without spending money that I just bought the computer used

  I don't know my key code or how locate it how can I get a code key that I have no credit or debit or money

  Hi John,.

  You can follow the steps in the link below to check if the operating system you are using is enabled or not.

  How to tell if Windows 7 is activated?

  http://Windows.Microsoft.com/en-in/Windows7/how-can-i-tell-if-Windows-7-is-activated

  The steps in the link will help you activate Windows 7, but you must have a product key. If you do not, you need to buy it.

  Activate Windows 7 on this computer

  http://Windows.Microsoft.com/en-in/Windows7/activate-Windows-7-on-this-computer

  Do not hesitate to write to us in case if you have any questions. We will be happy to help you.

• How to activate windows, while the mobile version of windows 8 to 7 in a computer pre-installed with windows 8?

  Where can I get the key for windows 7 and how to activate it?

  You must provide accurate and complete information when you post a question here.

  _____________________________________________________

  The advice is to contact Lenovo. because they are OEM

  It is what is in the link you posted:

  How to switch your PC

  Your OEM will have the best information on how to downgrade your specific PC and in some cases, may decide to send you the installation media or a PC that has the downgrade operating system already installed.

• HOW TO ACTIVATE WINDOWS AFTER FORMATTING COMPUTER?

  A few reasons I had to format my laptop because of which I lost my windows genuine, but I still have the product key. So is it possible to reactivate authentic windows of this product key on the same computer laptop?

  Hello Rish

  Right click on computer > properties at the bottom of page is activate windows now, it will fail the call number to the 1-800 number, request to follow.

• 405 proDesk G2: how to activate Windows after replacement of the motherboard

  I upgraded my G2 405 ProDesk to Windows Pro 10 of the original OEM Windows 7Pro earlier in the year.

  Last week, is not the motherboard.  The PC is still under warranty, so HP arranged for a replacement on place of the motherboard.  It worked well, except that windows is activated is no longer.  I called Microsoft with the installation ID in order to get a re-activity windows confirmation ID.  Microsoft said that I need the original license key.  I don't have that because it's an installation OEM from HP with, arguably, the key in the BIOS that has been replaced.

  So what I do now?  HP will issue me with a license key given that the PC is still under warranty?

  Just to clarify, the license was Windows 8.1 Pro downgraded to Windows 7 Pro, so there was a key Windows 8.1 on the original BIOS but the PC came with Windows 7.

  Your post got me thinking, however. I ran the FirmwareTablesView.exe application on the new motherboard and found a license key in the BIOS.  Then, I went to change the product in Settings\Update & security key and enter the key of the new BIOS.  Activation was then successful.

• Impossible to activate Windows after the upgrade card motherboard and CPU.

  replacing a motherboard with windows xp

  I have an OEM of Windows XP version on my computer. I'm updating the card CPU and mother. To run when I try to start Windows he wants me to activate. I tried to use the code activation and as expected, it failed. I called Microsoft and the best answer they had was to go to this forum. If you stand long enough on the automatic activation system a person live lights?

  Can say you a thing OEM = Original Equipment Manufacturer., short IN the license is related to a material of machines.  When you change hardware OEM license will not work.

• How to activate windows after upgrading my memory and HDD, motherboard?

  I built my system with a full copy of Windows Vista four years ago.  Since then, I've bought a 3 license upgrade to Windows 7 Home Premium.  I've improved this system and a laptop with this copy.  Now, I did a major update on my main system, replace the card mother, cpu, memory, and hard drive.  I made a new installation using the disks in windows 7, assuming that he asked to give me my Vista drive, but he never did.  The installation is completed successfully and now, three days later, I received an activation error.  The automated phone system didn't work either, saying: I did not meet licensing requirements.  What can I do?

  Try the phone activation, do not meet all the guests until given the opportunity to speak to a real person

• PS CS 2 not understand how to activate it after the hard disk crash

  I reinstalled it, had to install PS worm. 6 before im able to put in my upgrade to PS CS2

  CS 2 tells me that I have only 26 more days to work the demo before the end of it

  will come.

  What can I do to activate it?

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

• HP envy: activate Windows after the restoration

  Windows will be not turn twelve key blocked several utilities like hp have used the same image for all laptops of the range please help I can't find a phone number if I don't get any joy is going to post to twiter of face book you tube etc about poort service delivery etc.

  He fixed HP are at fault Hp Image is broken and uses a bad serial number. I installed 10 Windows Installer ddownloaded on their Web site on a clean USB and oh and magically active HP thank you no use at all unless I want to spend more money on your tech suport I already have on you price equipment. try to get a phone number to call other than that which costs £35 and do not promise a fix is impossible. I will add you name to the list of companies that I will not give my habit of longerr to due to poor customer service.

• Adobe Acrobat does not work after the 30 day trial period.

  CS6 is installed on a computer using OS 8.1pro. Everything in CS6 works very well. I'm finding contradictory opinions, need help from experts online.  Thank you very much!

  Hi natalieb78869649,

  Please try this: does not start after 30 days. Installed as part of a suite CS6

  Thank you

  Abhishek

• How to activate Windows 7 after the 30 day period?

  How can I activat windows 7 after the 30-day grace period?

  Type Activate in the Windows 7 search box and click on the Activate Windows icon that appears at the top of the Start Menu.  Then enter your genuine Windows 7 product key for the edition of Windows 7 you have installed.  If you do not have a genuine Windows 7 product key, you can buy one on the Microsoft Store. Carey Frisch

• After the 30 day trial, I can't connect to my computer. I get an error of activation to activate online and it does not accept my product key

  Original title:

  After the first day of the 30 day trial for windows vista, it now has an error when I connect to activate online even though I now have my product key, it dosnt let me put in, it only shows the error box and nothing elese and when I hit about it disconnects me. What should I do?

  Hello

  1. What is the exact error?

  2. don't you enter the product key during the installation of Windows Vista?

  After the 30-day grace period, Windows Vista goes into a reduced functionality mode.

  The issue that you are facing may occur if you do not enter the product key during the installation of Windows Vista.

  I suggest you to contact Microsoft Customer Care Center for assistance links to this issue.

  How and when to contact Microsoft and support Customer Service

  http://support.Microsoft.com/kb/295539

• How can I activate XP after the expiry of the grace period of 7 days?

  A couple of weeks, my PC (home built with XP Pro OEM) downloaded a load of updates through Windows Update.
   
  This weekend was the first time that I had turned it on since then, and the logon screen XP tells me now that XP is not active any longer.  I guess that's probably because it updates has been for the Mo (he forced a reactivation of the last time, I downloaded manually the latest drivers from MB a couple of years).
   
  The problem I have it when I click on one of the user accounts to log on, it opens a window of 'Activation' and then does nothing.  I guess he's trying to connect to internet, but it does not have an impact on my wireless router (no flashing lights).  I tried this wiring in the router, but it does exactly the same thing.  The "activation window will sit quite happily there doing nothing for 24 hours."  No information is provided on the 'Activate' window and the only button is close 'x' in the upper right corner - by clicking on this takes me bag to the opening screen of session where all I can do is click on a user account with the same result, or click "close".
   
  IIRC last time I had to re-activate failed when I tried to do this online and I had to do it by phone - but it doesn't seem to be an option now.
   
  How to solve this please?

  she rarely does and I ran a comprehensive analysis of McAfee and it seems ok - unless you can advise of another analysis to run?

  Well, certainly follow the suggestions of Christmas. If your question is simply a need to save script .dll files, you are probably in much better shape than I thought.
  However, you can never be too safe when it comes to malware. McAfee is generally frowned upon in this forum. There are many things that it is not simply to catch.
  I think that the page of Brian here:
  http://www.selectrealsecurity.com/malware-removal-Guide
  ... is a great resource. At the very least, you must run MBAM!

• Please help me out on how to activate Windows 7 final, only 4 days left to activate windows

  Hello! hope that your door... ok please help me my problem in my computer how to activate my window 7 ultimate, I've been is stayed for 4 days to activate... before... ok so im waiting for your answer so soon.

  Have you tried re-activation by phone?

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.