Hello [activation of CS3 because of the death of disk problem]

Similar Questions

• Increase the size of disk problems

  I just upgraded from Fusion 4 to 5 in preparation for the upgrade of Windows 7 to 8.  When I initially installed my VM several months ago, I waited to invite me on the amount of disk space, I wanted to allocate, but he never did the installation.  He created the virtual machine of 20 GB (boring), which would work if Windows ever wanted to do an update and that you ever wanted to save a file to the virtual computer.

  I used the Fusion to increase the size of the disc to 122 GB (I have over 600 GB available on my Mac) and it is distributed correctly and when I open windows the space was available on drive C.  However, when I discovered the virtual machine to the Virtual Machine in Fusion library it reads 20 GB.

  After more than an hour of reading of the VMWare knowledge base, I found an article that said that I had to increase the disk using Mac disk utility; However, this option is disabled/grayed out for me.  Another article proposed a ton of utility downloads to do this and overall I am lost.  It would be completely avoidable BS if the installation would have helped clarify the size of my disk on the installtion of the virtual machine.  Alas, it's wasn't the case.

  My question is does my windows hard disk shows 122 GB total space, but the library of virtual machines VMWare shows correct 20 GB and what can I expect if I start tyring upgrade to Windows 8 in terms of space?  Is there allocated 20 or 122 GB?

  Thank you.

  I just upgraded from Fusion 4 to 5 in preparation for the upgrade of Windows 7 to 8.  When I initially installed my VM several months ago, I waited to invite me on the amount of disk space, I wanted to allocate, but he never did the installation.  He created the virtual machine of 20 GB (boring), which would work if Windows ever wanted to do an update and that you ever wanted to save a file to the virtual computer.

  IIRC A Windows 7 Virtual PC to a 40 GB in VMware Fusion 4.x by default however any default size one can always modify virtual hardware parameters before installing an operating system.  Anyway to increase the size of the virtual hard disk is a process in two stages, the first of which is made in the settings of the Virtual Machine's hard drive.  The second part is made with a 3rd party utility or the OS itself, when it is necessary and it is applicable in the case of Windows 7.

  In Windows 7, just go to disk management and extend the Volume, he tries but a few seconds.

  Note: Before performing any disk level operations such as this should ensure that you have a clean backup * of the entire Virtual Machine.

  =========

  * It is a known fact that Time Machine is not 100% reliable backing up/restoring VMS in all circumstances/conditions.  Also back up Virtual Machines via Time Machine of disk/time intensive and wastes a lot of space for something that may be corrupted and worthless time to restore it.  At least I would exclude the Virtual Machines with virtual machines and Time Machine shutdown, not suspended and VMware Fusion closed and then manually copy the VMS to another location, preferably on a different physical hard drive.  So keep the user data stored in the virtual machine saved out of the Virtual Machine on a regular basis in order to always have a backup of the current user data.  If you need to restore a properly saved by VM is not as common at least you will have a virtual working Machine and data user to go forward with when you find out your Time Machine backup of the virtual machine fails.

• [JS CS3/4] Stop the closing process (onEvent) problem

  Hello

  I try to stop a transaction via an event listener.

  I used which:

  #targetengine session
  docEvt();
  function docEvt()
  {
      var myEventListener = app.eventListeners.add("beforeClose",myAddDocGlobalEvt, false);
  }
  function myAddDocGlobalEvt(myEvent)
  {
      
      myEvent.stopPropagation();
      myEvent.preventDefault();
      alert('stop');
  }
  

  However, when I close the document... it is closed :-(

  I get the warning "stop", but the document window is no longer visible.

  I really want to stop the process of closing. Do I did wrong?

  TIA Loïc

  Hi love,

  BeforeClose is voidable?

  Try:

  alert(myEvent.cancelable);
  

  If set to false, you cannot prevent the default behavior.

  @+

  Marc

• Too many activations on CS3 Web Premium Suite

  Hello

  I have a serial number for CS3 Web Premium as a result won in a contest some time ago. But when I try to activate my installation, I get a "too many activations" error. How can I solve this problem and continue to use my product?

  Thank you for your time.

  Hi Liviucmg,

  Adobe allows two simultaneous activations of CS3, so if the software has been installed and enabled on both computers before, you will need to disable one or both of them to perform a new installation. On the old computer, start a CS3 application. From the Help menu choose Help > Deactivate > permanently disable: Learn how to enable or disable Adobe applications.

  If you do not have access to old computers to disable, you will need to contact customer service via chat and ask them to reset your activations. Cat representatives are unable to technical troubleshooting for older products like CS3, but they can help with licensing and activation. FYI, Adobe have reset your activations will delete the information about the licenses of all your computers, so you'll need to reactivate the computers currently in use.

  For more information, please visit: "Activation limit reached" or "connection error impossible ' with Adobe applications. Let us know if you have any additional questions.

  Best,

  Del

• Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Have already tried to contact Adobe and they told me to reinstall the program. I did this and the same issue. It's crazy. I can not turn off something that I did not more...

  Thank you.

  No - I had, of course, tried all these things. Finally, I had someone (after several days) on the personal chat group that could fix and it did it in a few minutes. Too bad that nobody else seemed to be able to do. Adobe is very soft.

  I can't thank enough the other person - it was amazing.

• Cannot connect with active domain Directory, because the local policy of this system does allow you to log on interactively.

  Cannot connect with active domain Directory, because the local policy of this system does allow you to log on interactively.

  You will need to create a new post on the TechNet forum for assistance in the field of related issues:
  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

• I get a notification for my cs3 reactivate. The telephone or online activation works. What should I do? It's scaring me. I love cs3 and use every day.

  I get a notification for my cs3 reactivate. The telephone or online activation works. What should I do? It's scaring me. I love cs3 and use every day. How to re activate it? I have the serial and activation numbers and there is also a type of ACTIVATION # repair. Help!

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  If this does not help, what problem see you with activation online?

• Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks.

  Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks. This is what im seeing.

  

  See my response in audition 3 error with installation

• Adobe Design Standard CS3 will not install because of the "shared components Installation failure".   Help?

  I keep trying to install CS3 Photoshop, Illustrator, InDesign pack.  But it is not because of the "shared components" do not install.

  I tried to use the cleaning tool.

  I tried to turn off my security system.

  It still does not work.

  I looked in the Windows Event Viewer and the MSI installer says that the Flash Player 9 could not register.   This is why I can't install CS3?   If so, what can I do to fix this?  Help, please!

  Hi neptunecadet,

  Please make sure that you install correct and you must also make sure that you have an operating system that is compatible with CS3.

  Please follow the steps mentioned in the https://helpx.adobe.com/creative-suite/kb/component-install-failed.html

  Let us know if this helped!

  Kind regards

  Aurélie hamadi

• Activity app seems to remove the moving activity

  For 3 days in a row, I went to bed with all the 3 circles completed in my application of activity, to wake up to the top to find the purpose of move has been missed. I checked the application of health and no activity has been deleted, thankfully. Can someone help me to debug why my app activity is apparently the suppression of progress from one day to the next?

  Last night, I took a screenshot at 11:51 (showing 556/480 calories) to Jan. 2. This morning, I took another screenshot at 08:01 (showing 273/480 calories) to Jan. 2.

  

  I'm also using Runkeeper for iOS versus 6.4 for training during the day, but as you can see the work data (and information move/calorie are remained intact in the application of the activity):

  

  Specifications/versions:

  • iPhone 6 sec more
  • iOS 9.2
  • Apple watch OS 2.1

  Hello

  You will find that it is because deleting duplicates of energy Active, data that was initially double counted.

  Reference is made in the following thread:

  Problem Apple Watch move objective

  It includes this comment from a user:

  "The developer said it would be fixed in the update of 6.3. We are on 6.4 and it is still not fixed.

  You can communicate with the Runkeeper application developer for assistance.

  More information:

  https://iTunes.Apple.com/us/app/RunKeeper-GPS-running-walk/id300235330?Mt=8

  https://support.RunKeeper.com/HC/en-us/categories/200104316-announcements

• Domain Services Active Directory could not create the ntds object due to dns settings look for failure on the specific domain controller

  Forest consist of 1 DC server 2003 with all fsmo and 2000 1 domain controller roles.

  Completed all questions of adprep and when I tried to promote server 2008 standard edition to a domain controller, had the error message stating that Active Directory could not create the NTDS settings for the domain active directory CN = NTDS controller

  Settings, cn is 2k8dc1, cn = servers, cn = Default First Site Name, c is Sites, cn = Configuration, dc is Marie-France, dc = com on the ad distance dc server2.amanua.com.

  To ensure that the provided network credentials have sufficient permissions

  "The DSA operation unable to act because of the failure of the dns lookup"

  The idea was to demote the 2000 machine when I completed the installation of 2008.

  Hello

  You can display the query in the link provided to improve assistance:
  http://social.technet.Microsoft.com/forums/en/categories/

• Need help with the disks 'unreadable' configuring software raid after the death of the startup disk and system restored.

  I'm looking for some advice on how to restore a windows xp installation software raid 5 that was running on my XP system. I had a problem when the startup disk has failed, but I was able to backup the system before it can. I replaced the drive and restored the system and everything came, but I was not smart to do this and accidently left the readers connected when restoring raid. I don't know if windows has done something when I tried to install XP on the new drive, or maybe something else has happened when I restored the system from the backup, but my raid drives can not be used. There was a moment in the restaurant business I saw a message on the MBR, but I thought that was just for the drive being restored. I didn't have a single player who held any information on the other disks in the system, but I'm not 100% sure on that.

  When the system boots the windows logo screen takes 10-20 minutes before you get on the desktop. Windows Disk Manager takes 20-30 minutes to fill the list of drives and status on the disks three raid is 'dynamic' and 'unreadable' is not reassuring. I suspect it's a problem MBR or partition table that must be corrected before trying to reactive the raid, but this is just speculation.

  The raid drives are on a promise ide/scsi disk and make it appear to start correctly with names and sizes. After that I get nothing. I do not have another scsi controller (or), but I thought I'd try active @ partition recovery to see if she can find information on the disks.

  I hope someone has some experience with recovery like this, because this is a first for me. I thought I was pretty sure running a raid-5, but wouldn't you know, the tech gods have found a way to crush my plans...

  Thanks in advance for any help!

  Hello

  Thank you for visiting the Microsoft answers community site. Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows XP IT Pro Forums.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• I have two Acer ASpire laptops. They are totally frozen because of the virus. I lost the recovery of Windows Vista Ultimate Edition disc, where to get a replacement. I have to rebuild my laptop.

  I have two Acer Aspire laptops.  They are totally frozen because of the virus.
  I lost the recovery of Windows Vista Ultimate Edition disc, where to get a replacement.
  I have to rebuild my laptop.

  Hello

  No - what are the two Acers come with a recovery disk?

  If this is not the case, one of them would have a recovery partion, which specifically is to reinstall the operating system on it.

  With an Acer, you press Alt + F10 at startup to start the recovery process.

  All data are lost when you do the above.

  And for the lost disc, contact Acer and ask them to send you recovery disks.

  They do that for a small fee:

  http://us-store.Acer.com/RCD/

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• What can I do if I can't read that the key is for Windows because of the part of the key on the sticker has rubbed off and must be re-installed Windows?

  The key to Windows inlegible sticker, want to reinstall windows

  What can I do if I can't read that the key is for Windows because of the part of the key on the sticker has rubbed off and must be re-installed Windows?  The product ID is located under the control panel > system maintenance > system > Windows Activation of a useful?  I don't want to end up with a Clipboard after that reinstalling Windows because I have a legitimate copy of Windows, but the key became disfigured over time, since it's on the bottom of the laptop.  I have Windows Vista Home Premium SP 2 running on a Dell Inspiron it's way outside the guarantee of its window.

  Thank you!

  Hello

  If you have a product key on a sticker in your computer, this means that you have an OEM product key. If you have OEM keys, this means that the windows you have here is preinstalled.

  If you reinstall windows OEM copy, you must use either the original manufacturer recovery disk or the recovery partition. If you use one of the people, should not be put to any start-up because the windows OEM versions are technically preactivated.

  If you don't have a disc or a recovery partition, you can contact your OEM (DELL) so that they can send you a disk. Alternatively, you can contact Microsoft Support just in case. : D

• I can't activate my Windows 7 Home Premium because of the area restriction/limitation

  Hello

  I don't know what to do on this subject... just help...
  I bought a genuine Windows 7 Home Premium (I have the license number in a sticker on my laptop) in Indonesia, I installed it in a hurry and I thought that I activated in Indonesia.
  Now I'm in the Canada to study and will not be back to the Indonesia until that Christmas and now I realize that I have not activated yet... (I think it's because as the internet problem in my home country)... He tries to activate whenever I connected to the internet but it says I can't because of the restriction of area - and if I don't activate within 30 days so I can't use (it's time)? ...
  So... what should I do (please don't tell me I have to buy a new one here...)-because I already bought a real (and it's certainly NOT CHEAP)...
  I know that maybe it seems a bit silly but please help. My time is running out...
  Thank you.

  It is the computer that you select.  Select the country you are currently.