Hello, I'm waiting for my new to me ipod and I would like to start loading itunes with my recordings so everything is ready for the new ipod syc when happens it is - it possible? Thanks in advance, is it possible

Similar Questions

• Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How can I uninstall the programs of the

  Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How do I uninstall the programs of the broken laptop and not running before installing on a new? Sincere friendships Fabian

  Hello

  If you have access to the machine, turn off Adobe CC applications by the signature of the application.

  Please see connect and disconnect to activate Cloud Creative applications

  Kind regards

  Sheena

• Hi, I have a macbook pro retina 15 "(mid-2015) and I would like to connect it to my I-mac to use as monitor." The i - mac is from 2009 and a not a connection Thunderbolt... wouldn't I need a maid in the DVI male? Thank you!

  Hi, I have a macbook pro retina 15 "(mid-2015) and I would like to connect it to my I-mac to use as monitor." The i - mac is 2009 and a not a port Thunderbolt... wouldn't I need a love at male Cable DVI?

  Any help / advice would be much appreciated... Thank you!

  Your iMac has minidisplay port?  Here are the conditions:

  https://support.Apple.com/en-us/HT204592

  Ciao.

• Why do I get "wait for the program to respond" when you work in Adobe elements Organizer?

  I have a terabite and a half hard disk with not much used.  I have b een reading on Adobe 9 and the answer seems to be the lack of space.  That simply cannot be true in my case. I'm free of 1.80 to 1.45 TB.  Windows 7 operating system. HP desktop computer.

  It takes forever when workiing tagging photos, written comments at the bottom of the photo, etc.  I'm always haviing 'wait for program to answer?

  Hi Bernice,

  OK, if the drive is inside your computer, making it a hard drive internal and it should get good results for your images and the catalog.

  You've optimized your catalog?  Use the file... Catalog to open the Catalog Manager.  Select your catalog below and hit the 'repair' button (choose 'Repair anyway' If you get this prompt).  Then do the same with the button 'optimize '.

  Ken

• I have my ID Windows Live ID have not used for quite awhile and I would like to start using it again, the live ID is always committed, however I don't remember the password

  Hello, I have my ID Windows Live ID have not used for some time and I want to start using it again, live ID is always committed but I don't remember the password and I can't use the reset password option because I don't know that it is marked and "inactive".  Please let me know promptly if you are able to reactivate my live ID.  Once you answer this, I will use the live id address.  Thank you in advance.

  original title: can reactivate you my windows Live ID?

  Hello, I have my ID Windows Live ID have not used for some time and I want to start using it again, live ID is always committed but I don't remember the password and I can't use the reset password option because I don't know that it is marked and "inactive".  Please let me know promptly if you are able to reactivate my live ID.  Once you answer this, I will use the live id address.  Thank you in advance.

  It is a peer-to-peer (user forum.  You don't talk to Microsoft directly.  The answerto your question is, "No."

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

• new SSD HP Pavilion HPE win 7 home Premium Error: Driver_Power_State_Failure Bluescreen from 30 to 45 minutes waiting for the stop down.

  Hello all, there

  I recently installed a new SSD in a HP Pavilion HPE with windows 7 Home premium. After this event I get bluescreen Driver_Power_State_Failure after about 30-45 minutes waiting for the computer to stop. I have a minidump file if this will be useful and I would be very grateful if someone could help me solve this problem :D

  Minidump: http://www.mediafire.com/?hy7so6n9af5f73v

  I hope this helps and all support is most appreciated!

  The tihub3.sys seems to be in question:

  BUCKET_ID: X64_0x9F_3_POWER_DOWN_IMAGE_tihub3.sys

  The tihub3.sys, which is dated January 14, 2011, is a Texas Instruments USB 3.0 driver so try to update this driver by installing the next update:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-108667-1&CC=UK&DLC=en&LC=en&os=4063&Product=5144370&sw_lang=

• BlackBerry Q10 in waiting for the new Q10 hit sprint but what will happen to my email?

  Currently, I am waiting for the new Q10 hit sprint.  but I hear that I have will no longer be able to use my email with the new blackberry blackberry.net.  I currently use it as my email address.  1 it's true they won't E-mail blackberry and if so what steps do I need to take to make a smooth transition?

  1. Yes, the blackberry.net email is no longer available... and quite honestly, in my opinion, it's a good thing. Blackberry.net email is not available elsewhere ON your BlackBerry, you can view it on the handheld device itself and no backup otherwise. Get a free gmail, yahoo or Outlook.com account.

  2. read this: Article ID: KB33260 (hosted) BlackBerry e-mail address reference for BlackBerry OS 10

  Then, create and start using another free email account now. When you finally go to the thread at BlackBerry10, you will have your solution in place for shipping the blackberry.net email account.

• CREATE INDEXES online is waiting for the TX = 4 mode

  Hello

  I have a strange blocking problem where an INDEX CREATE LINE is waiting for a transaction that did only inserted a line in the parent table.

  Wait is mode TX = 4 (not TM locks) and I currently have it reproduced only on 11.2.0.3 and 11.2.0.4

  Easy to replicate the schema SCOTT:

  Session 1:

  SQL > set time on

  14:54:58 SQL > insert into SCOTT. Dept (DEPTNO, dname) values (50, 'test');

  1 line of creation.

  Session 2;

  14:55:24 SQL > create index test on SCOTT. EMP (ename) online;

  It's waiting ' enq: TX - line lock conflict ":"

  SQL > select sid, chain_signature from v$ wait_chains where blocker_is_valid = 'TRUE '.

  SID CHAIN_SIGNATURE

  ---------- ----------------------------------------------------------------------

  603 ' SQL * Net client message' < ='enq: TX - line lock conflict '

  While waiting to acquire the lock of transaction in mode 4:

  SQL > select * lock gv$ where sid = 603

  INST_ID SELECT ADDR KADDR SID TYPE ID1 ID2 LMODE CTIME BLOCK REQUEST

  ---------- ---------------- ---------------- ---------- ---- ---------- ---------- ---------- ---------- ---------- ----------

  1 00000006CDA05EB8 00000006CDA05F10 603 352577 0 4 0 348 2 AE

  1 00000006CDA06078 00000006CDA060D0 603 DL 779505 0 3 0 308 2

  1 00000006CD9FABE0 00000006CD9FAC38 603 DL 779505 0 3 0 308 2

  1 00007F28001F5028 00007F28001F5088 603 779505 0 2 0 308 2 TM

  1 00007F28001F5028 00007F28001F5088 603 779510 0 4 0 308 2 TM

  1 00000006CD9FA240 00000006CD9FA298 603 779505 0 4 0 308 2 OD

  1 00000006B4F26790 00000006B4F26808 589847 711499 6 0 308 2 TX 603

  1 00000006CDA0ED68 00000006CDA0EDC0 655377 996169 0 4 308 TX 603 0

  I've traced 10046 and 10704:

  broadcast message = obj 29231196672 #= 779514 tim = 1447251053634045

  ksqgtl * mode TX-000f001e-000ad97c = 4 flags = 0 x 10001 timeout = 21474836 *.

  ksqgtl: xcb = 0x6bb322528, ktcdix = 2147483647, topxcb = 0x6bb322528

  ktcipt (topxcb) = 0 x 0

  ksucti: init logon has of txn DID:

  ksqgtl:

  ksqlkdid: 0001-003F-0000AFC4

  ksudidTrace: ksqgtl

  ktcmydid(): 0001-003F-0000AFC4

  ksusesdi: 0001-003F-0000AFC3

  ksusetxn: 0001-003F-0000AFC4

  ksqcmi: TX, f001e, ad97c mode = 4 timeout = 21474836

  2015-11-11 15:11:36.566

  WAITING #140700792578680: nam ='enq: TX - line lock conflict ' ela 42932082 name = | mode = 1415053316 usn < < 16 | location = sequence 983070 = obj 711036 #= 779514 tim = 1447251096566283

  And there is nothing in V$ SESSION leader/block/line current. class obj # is EMP. current sql_id is the CREATE INDEX.

  If anyone has an idea on:

  -Why creating an index in line must wait for transactions that modified only parent table

  -How to continue the investigation

  -can or cannot reproduce in other versions

  Thanks in advance,

  Franck.

  I guess you have a constraint foreign key between emp and Dept.

  It's expected behaviours: since 11.1 any DML at one end of a referential integrity constraint translates into a mode lock 3 taken at the other end, and your phenomenon resembles a side effect of this.

  When you try to create the index online that your session must assume that the other session (holding mode 3 on the emp and dept) may have changed the emp and dept, so it must wait for the session to the commit or rollback.

  (I guess that in principle, he could walk the cancellation of the transaction see if EMP had in fact been changed - but maybe who was considered too complicated to be worth the risk to implement)

  Concerning

  Jonathan Lewis

  Updated - I just did a quick check to reproduce the effect on 11.1.0.7

  For reference - here are a few notes on modes of locking and how the application has changed over time: https://jonathanlewis.wordpress.com/2010/06/21/locks/

• I already have 5 Lightroom and installed on my PC. Yesterday, I bought a Macbook Pro and I would like to install my Lightroom 5 in my new Macbook Pro. Is it possible to install on two different computers? If so, how is it possible to install by Inter

  I already have 5 Lightroom and installed on my PC. Yesterday, I bought a Macbook Pro and I would like to install my Lightroom 5 in my new Macbook Pro. Is it possible to install on two different computers? If Yes, how is it possible to install via the Internet, like my Macbook Pro doesn't have CD Driver. Thank you very much for your support. Hope.

  Hello

  You can install and activate the perpetual software (purchased) two computers, as long as you don't use it on one at a time.

  To load the software on another computer, download and install it as you did on the first computer. Then enter your serial number to activate it.

  Please find the link below to download:-Download Photoshop Lightroom

• SRM does not wait for the guests of the DPM enabled

  Hello

  We are testing our environment vsphere 5/SRM and essentially 5, everything goes very well except for wake up initiated by the SRM to the DPM active guests.

  --------------------------------

  The SRM 5.0 doco States:

  SRM temporarily disables DPM for the cluster, and ensures that all guests there are lit before recovery begins. After the recovery or the test is completed, SRM reactive DPM for the cluster, but it hosts are found in the current state of execution while DPM is able to feed them downwards as needed.

  --------------------------------

  The question that we see is that SRM send indeed wake up for guests in mode standby and milestone of recovery as a success. The problem is that SRM does not wait until the guests are completely turned on before before feeding on the VMs. The day before hosts to wake the system correctly storage access newly presented no problem. The problem is that the bubbles to test network is not created on the hosts of the day before and no VMs are assigned to these hosts during the entire test.

  That said, I checked the advanced settings and I cannot find a setting that will force SRM to wait for the standby hosts to be fully integrated in the cluster before you perform additional steps.

  Everyone knows this behavior? Am I missing a setting somwhere? My fear is that this behavior will happen during a real failover and potentially cause problems.

  Thank you for your time,

  Smokey

  Hello

  This should not happen.

  Can you please open a SR, download bundle Journal, engineers will be able to understand what is happening?

  Once you open a case, display the number of SR.

  Michael.

• Wait for the event begins with SQL * Net message from client-time wait 178577 units

  Hello
  
  I'm watching events waiting for a request from long time in TOAD.
  I start the query on an instance of TOAD, and open the browser to log on to another instance.
  But I am surprised to see that in "TOtal expected" on the RIGHT part->
  SQL * Net message from client is the longest time and is already - > 178577 units while I just to start the query.
  
  Considering that, in the current waiting she shows DB file scattered read correctly for a few seconds.
  
  Please suggest.

  user8941550 wrote:
  Hello. No explanation for this... :-(

  Hello

  people work here, you don't know?
  I think Tom Kyte explains it well enough. This wait event is linked to your session database waiting for the guest to say to do something.

  So it is not related to the database, but to your application.
  Also as it is a wait of session event you might have had your session inactive for some time (do nothing)

  If you want to check the waiting events correctly I suggest using tkprof and start a new session in SQL more as shown by Tom Kyte in the link I posted.

  Then, run your query in sqlplus setting track and pull it out as soon as your statement is completed.
  that is to say:

  -- myest.sql
  alter session set events '10046 trace name context forever, level 12';
  SELECT ... -- your query here
  exit
  

  Run in sqlplus in this way:

  sqlplus user/password@db @mytest.sql
  

  Then check with tkprof.

  Kind regards.
  Al

• "PX Deq Credit: send blkd" wait for the event as pink a line on 'EM

  Hello
  We expect 'Other' and see the pink lines on EM on a particular query.
  Wait type is "PX Deq Credit: send blkd".
  After that I checked this type of waiting on google, I learned that this wait occurs because of parallel queries.
  My question is, we have a lot of requests in our database, but why we see such an event only when a materialized view is selected? This mv has only 19,000 lines and that is so small, compared to the 100G tables in our database of 2.5 to.
  What could be the reason another of those pink lines? Views materialized cause such a thing?
  Thanks in advance,

  KAYSERI wrote:
  After that I checked this type of waiting on google, I learned that this wait occurs because of parallel queries.
  My question is, we have a lot of requests in our database, but why we see such an event only when a materialized view is selected? This mv has only 19,000 lines and that is so small, compared to the 100G tables in our database of 2.5 to.
  What could be the reason another of those pink lines? Views materialized cause such a thing?

  The comments to see if the event is inactive or not, here's something I wrote a few years there are on this forum:
  Re: PX Deq Credit: send blkd to AWR "Top 5 Timed Events.

  When you 'selection of a materialized view' is the MV, the only thing in the query, and you choose to him with an explicit reference to the name MV? Or do you mean that you run queries which understand the MV like a table - perhaps after rewriting?

  MVs do not have parallel execution. However, I would check your run settings in parallel at the database level and the level of the table and the index for this MV; and I would like to check the statistics on this MV to see if they conform to your opinion on its size.

  Concerning
  Jonathan Lewis

• Looking for a Boolean function similar to or, but do not wait for the second entry in case he gets a 'real' a single entry

  my program works in 2 processes in parallel inside a while loop and should stop when one of them ends.

  How can I do? Uses the function 'Or' wire loop the stop condition will not do the job, waiting for the two processes to give their comments before running.

  What I really need is a function that waits until she gets a 'true' through one of its entry and then executes without waiting than the other.

  Y at - it such an option?

  If not, does anyone have an idea how to achieve what I have described here?

  Thanks in advance!

  What you need is a "not synchronous or", i.e. "do something if Item 1 becomes real GOLD point 2 becomes true.  One way that comes to mind to do is with a design of producer/consumer model (event), where the consumer is a State Machine with a shutdown state.  Get 1 point to trigger an event (perhaps using a user event or property Value Change (follow the signs)) when it turns out true, and have it send to the consumer the Stop State.  Download point 2, to do the same thing.  Now one of them becoming true will cause the shutdown state be registered (without taking care of doing the other element), in other words, that becomes a real, (consumer) loop stops.

  Bob Schor

• Delay (30000 milliseconds) waiting for the SNMP service to communicate.

  When I start the SNMP service in Windows Server 2003 Enterprise 64-bit (SP2), the event ID 7009 (Timeout (30000 milliseconds) waiting for the SNMP service to communicate.), kindly help me to solve this problem.

  Hello

  Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• remote desktop hang at 'Please wait for the system event notification' during logoff

  When I disconnect a remote connection, sometimes the GET logoff screen stuck at "Please wait for the system event notification" next time I try to open a session.
  This can also happen if that I disconnect the user, but the user seems to weigh on this same screen as well.

  There is a particular difficulty for this?  I can connect as long as administrator to another account, I can't kill connection attached somehow to be registered in the next time?

  Thank you

  Hello

  I suggest you to take a look at the answer in this thread and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/Sens-could-not-connect-to-the-system-event/4e5a04e9-88f8-4017-9416-2ca67c5ce7c5

  Hope this helps,