Why do I get "wait for the program to respond" when you work in Adobe elements Organizer?

Similar Questions

• How can I get rid of the box that appears when you start Firefox 'Restore previous Session'?

  How can I get rid of the box that appears when you start Firefox 'Restore previous Session'?

  Subject: House is the default in Firefox 4 home page - look at the address bar containing the addresses of web page - it is the container for Google search, with a 'extract container' and below these elements is the Previous Session Restore button. It's not the same homepage that previous versions of Firefox used (although it is similar in appearance), it is a 'local' page that won't load the Internet.

  Set this page as your home page, which is what Firefox 3.6 and earlier versions had for the default home page. He has Previous Session Restore button/link.
  
  http://www.Google.com/Firefox

• Each disk partition requires an OS installed for the programs installed in it to work?

  My PC HP Media Center m7760n, provided with the hard drive partitioned into three sections. For the operation of recovery (to drive "D"), and the other two sections labeled as 'C' and 'E' drive by car. I have Vista Home Premium loaded in the 'C' drive, as well as several MS Office applications and documents management software. I have a software game that I want to load into the drive 'E '. I need to install an operating system in the 'E' drive to run the software it contains, or may the computer uses the operating system already installed on the drive "C"? It's probably clear as mud, but I hope someone can help me.

  LL, each partition on a hard disk is identical to a separate hard drive.  You can install games on one without an operating system.  However, some games will automatically install to the C:\ drive.  How to install to E: is to use "custom installation".  This will allow you to choose where you want the game to install.

  I have two separate hard drives in my computer.  I use the second hard drive to install any software that is not related to the operating system.  I have installed on C:\ are programs, for example, anti-virus, malware, etc.  They work directly with the operating system.

• How to get VM to the .vmx file path when you have the VM name?

  Hi all

  I use the latest version of VIX API to power on virtual machines on an ESX Server. I work with c# in Visual Studio 2012 and currently I have power on the virtual machine by using the following code:

  VMWareVirtualMachine virtualClientMachine = host. Open (vmMachinePath, 2100);

  While this works, I think it is better to be able to turn on the virtual machine when you know the name of the virtual machine and not the path. So, how can I get the path to the VM to the vmx file when I know the name of the virtual machine? For example, if my VM on the ESX Server is called WIN7GERMAN, how I can get the path and pass this to the host. Opening function?

  Thanks for any help or code.

  John

  VM names are not unique, that's why it is not supported.

  You can use VixHost_FindItems() and locate the VIX_PROPERTY_FOUND_ITEM_NAME property without papers and use the associated VIX_PROPERTY_FOUND_ITEM_LOCATION to get the value to pass to VixHost_OpenVM().  You have to deal with duplicate however names

• How can I get rid of the annoying noise of when you click your mouse and you hear a clicking sound in your headphones.

  This happened since I reinstalled Windows XP.

  If you're talking about the click that occurs when browsing in Internet Explorer, see this link:

  http://ask-Leo.com/ies_click_sound_how_do_i_turn_that_off.html

• New user-can't do LR see Photoshop for the external editor. When you select edit that it allows me to select Edit in photoshop... What Miss me

  I am a new user... I am unable to make LR see Photoshop when you try to send it via the edition selection. Shows Photoshop preferences, but unable to select... what I am I missing?

  OK what a dummy I am... I thought that they would be installed... checked and I didn't install IT... duh!  Hope of thanks that solves the problem... If it is not there, is impossible to use it... thanks.

• problem on Windows vista 32-bit: blue screen appears and the system reboots automatically when you work

  signature of the problem:

  problem event name: bluescreen

  OS version:6.0.6001.2.1.0.786.3

  Locale ID: 16393

  More information about the problem:

  BCCode:10000008e

  BCP1:C0000005

  BCP2:94B525C6

  BCP3:9BA92C14

  Product information

  Product number: NC646AA

  Series No.:CNX9030FZ9

  HP Pavilion Slimline s3560in desktop PC

  Hi mkm.

  Were there any hardware or software changes made at the time the blue screen appeared?

  I suggest to close the PC and remove all devices in addition to the screen, the keyboard and the mouse.

  If the computer works without a blue screen for a reasonable period of time, you can start to add them one at a time to see if a specific device that is causing the error back.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get rid of the private browsing page when you open a new private window?

  When I opened a private page of private browsing navigation appears and says this:

  Private browsing

  Firefox don't remember the history of this window.

  In a private browsing window, Firefox will retain all the history of the browser, search history, download history, form web history, cookies or temporary internet files. However, files you download and bookmarks you make will be kept.

  To stop private browsing, you can close this window.

  While this computer will not have a record of your browsing history, your internet service provider or your employer can always track the pages you visit.

  I want to get rid of this suggestion?

  It is not possible to get rid of this page in normal mode.
  However, you do not get this page if you start Firefox in private browsing permanent mode (don't remember history).

  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": "always use the private browsing mode.

  You can use an extension for private browsing mode support tab.

  • Private tab: https://addons.mozilla.org/firefox/addon/private-tab/
  • Private browsing mode tabs get a dotted underline
  • You can toggle private browsing power mode using the context menu of a tab

• Major problem with first Pro CC (2015) the program randomly * gel * when you drag staple in the timeline.

  Hey there, having a very big problem important I need fixing with my first. I use the latest version of the creative cloud.

  My PC Specs are:

  Intel Core i7-4790 CPU @ 3.60 GHz

  16 GB of ram

  Running Windows 7 64 bit OS

  My question is which occur randomly during editing sessions. Everything will work perfectly, and then import a new video in the project bin (or image sequence or audio, what has happened several times)

  And I click on the video and drag it to the bottom in the timeline, the mouse pretty much freezes and wont let go of the clip. First is then suspended in a weird state of 'limbo '. I can still save the project and even export using shortcuts. But I can't click on anything whatsoever, or use any other action. The mouse is constantly in 'grabbing' mode. After the whole project is corrupted. I can solve the problem by opening a new project with a new sequence, then copy the clips... But it of very frustrating and massively takes time so please if anyone has a solution please let me know. Or whether it is actually just a big bug when creating last... This only started happening after the last update.

  I will attach some screenshots to continue my view of what is happening.

  

  Excuse Hypersnap logos, this is the only software screenshot that I could find which will appear at the mouse.

  Thanks for your help.

  Rich

  Hey Kevin,

  It seems fixed summer.

  Thank you

  Rich

• Office State is waiting for the agent

  Dear all,

  I manually installed agent to view a VM comments (ESX4.1), which is managed by a Virtual Center.

  And then I add an individual office by the Administor Console view.

  The status of office is still waiting for the agent.

  Could you give points for this problem?

  Thank you

  Dennis Dai

  Two common reasons is firewall or DNS problems.

  Disable the local firewall and make sure nameresolution works in two ways.

  Best regards

  Linjo

  If you find this information useful, please give points to "correct" or "useful".

• Looking for a Boolean function similar to or, but do not wait for the second entry in case he gets a 'real' a single entry

  my program works in 2 processes in parallel inside a while loop and should stop when one of them ends.

  How can I do? Uses the function 'Or' wire loop the stop condition will not do the job, waiting for the two processes to give their comments before running.

  What I really need is a function that waits until she gets a 'true' through one of its entry and then executes without waiting than the other.

  Y at - it such an option?

  If not, does anyone have an idea how to achieve what I have described here?

  Thanks in advance!

  What you need is a "not synchronous or", i.e. "do something if Item 1 becomes real GOLD point 2 becomes true.  One way that comes to mind to do is with a design of producer/consumer model (event), where the consumer is a State Machine with a shutdown state.  Get 1 point to trigger an event (perhaps using a user event or property Value Change (follow the signs)) when it turns out true, and have it send to the consumer the Stop State.  Download point 2, to do the same thing.  Now one of them becoming true will cause the shutdown state be registered (without taking care of doing the other element), in other words, that becomes a real, (consumer) loop stops.

  Bob Schor

• When you get Windows message close, waiting for background programs nearby.

  Whenever I close windows I get the following message: waiting for background programs nearby. To close the program that is preventing windows from closing click Cancel and then close the program. Keys to choose East Force stop or cancel. This has happened for a while. I'm sure that all programs are closed before closing at 99.9%. Any ideas would be appreciated to help me ghet get rid of this message every time I close out. I have Windows 7 family ed. 64 bit and a HP Compaq Presario CQ60 laptop. Thank you, Jane

  Hi Jane,

  Thanks for posting in the Microsoft Community.

  You can create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Now search for the question.

  Follow the below link to fix the user profile damaged.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

   

  If you need further assistance, please answer and we will be happy to help you.

   

• The Task Manager - I'm trying to get rid of the programs and files unnecessary

  I have more than 140 lines of running abuse. I'm trying to get rid of the programs and unnecessary files.

  When I am online the cpu is also the diagrams, and it doesn't take long before his stop at all

  Terry c

  Hello

  Use the clean boot method and Process Explorer to determine what are these services and, if applicable
  ask questions. Of course, check out the other methods as well to help improve the system
  performance.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• waiting for the task to the end host window.

  My computer startrd to show, when I restart or shutdown windows 7, I get a message saying that windows is waiting for the task host window to end what it means...?

  Hi Sanaaalsadouni,

  Thanks for posting your question in the Microsoft Community forums.

  The TASKHOST is a generic process, which acts as a host for the processes that are running DLL instead of exe files. Up TASKHOST checks the part Services of the registry to construct a list of services focused on the DLLS it needs to load, then load them.

  I suggest you try the procedure described in the article and see if it helps.

  Why my computer won't turn on or off quickly?
  http://Windows.Microsoft.com/en-us/Windows7/why-wont-my-computer-turn-on-or-off-quickly

  See the article for more information.

  See details about your computer's performance using Task Manager
  http://Windows.Microsoft.com/en-us/Windows7/see-details-about-your-computers-performance-using-Task-Manager

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you.

• Error of "Waiting for the bridge" mini Bridge Macintosh

  We had this error on a couple of our computers and none of the steps in the KB article http://helpx.Adobe.com/Photoshop/KB/Error-waiting-for-bridge-CS5.html working.

  We initially set up a computer to be used as our master image. Once we had things as we wanted on this computer we cloned the drive using Carbon Copy Cloner and distributed the main image to 3 other computers for the market trial. Mini Bridge worked very well on the main image. Once we have cloned the master we have changed the name of the user account by default to our intended user of the name following the directions of Apple for changing user account names. Mini Bridge has not worked on any one of the user accounts on computers cloned accounts whose names have not changed. I even tried to create a new test account and it still does not work.

  I did some experiments remove Adobe various associated files and then try to use Mini Bridge until I realized what worked. I found it was I could go to/Library/Application Support / Adobe and help to get information, make the user by default, the owner of the Adobe folder. (They had already read/write permissions). After that, they are able to use the Mini Bridge. However, none of my other user accounts can work with the Mini Bridge since they are not owners of the Adobe folder. It seems that Mini Bridge can work only if the current user is also the owner of the Adobe folder?

  I looked at permissions on the master for the Adobe folder and it said it was owned by the root and belonged to the admin group. On the cloned images, he said it is up to the user by default and it belongs to the personal group. I tried to use the Terminal and the owner and the Group of root and admin as it was on the master, but that made no difference. This will work only if the default user is in fact the owner of the folder.

  We will clone multiple computers over this way and I would like to understand why this does not work and see if there is a way to make it work for all users of the computer. I'm sure that something is happening to the permissions in the Adobe folder when the user account is renamed on the clone, but I also did a group of 4 laptops this same way and all cloned computers work very well under all user accounts.

  We will clone multiple computers over this way and I would like to understand why this does not work and see if there is a way to make it work for all users of the computer.

  It is a hard on for this forum, few of us have experience with multiple users set up.

  In general, Bridge does not always work that well on a network and a CS standard is limited to 2 computers and cannot be used in a both

  Having also several open versions of the PS at the same time is possible, but bridge only allows a single version to be open.

  Having multiple accounts on a computer must be able to work, but you can have an active with bridge I think.

  And to my knowledge, it is not possible to use a shared library for bridge, but I have no experience with it. Minijonction will search the library for each account.

  But as is, no experience with your configuration, just try to throw some ideas in the air