Hello. I need help to identify the right choice of processor for updating my old PC system.

Similar Questions

• Need help to determine the right router to buy for satellite internet

  I have satellite internet service and that you have recently acquired a 2nd computer for my child. What is the best wireless router purchase? We do not have game systems or other wireless equipment.

  I have a WRTP54g that I used when I had a modem cable and VOIP, but I don't have a home phone and the router slows down my internet experience horribly with the satellite service!

  Do I need a new wireless router, or can I work with it?

  Thanks in advance.

  To upgrade the firmware of your router, you can follow this link.

• Need help to identify the type of object in the loop of pl/sql

  Hello

  I need help to identify the Type of object declared beneath a procedure as shown below:

  I need to pass the parameter to the procedure as a TYPE of OBJECT and also refer to variables of Type Object in a loop

  create or replace type TEST_VALIDATION_REC is RECORD (order_num varchar2 (30),)

  number of inventory_item_id

  reserved_YN varchar2 (1).

  error_flag varchar2 (1).

  Error_message varchar2 (2000)

  );

  CREATE OR REPLACE TYPE VALD_TBL AS VARRAY (10000) OF TEST_VALIDATION_REC;

  PROCEDURE ADD_TO_ORD)

  p_lot_number_list IN VALD_TBL,

  p_ord_number IN Varchar2,

  p_user_id in NUMBER: = fnd_profile.value ('USER_ID'),-change 1.10

  p_responsibility_id in NUMBERS: = fnd_profile.value ('RESP_ID'),-change 1.10

  p_application_id IN VARCHAR2: = 'PO',-change 1.10

  x_error_flag OUT Varchar2,

  x_error_msg OUT Varchar2

  )

  In the above procedure, I had the VALD_TBL. Is it OK?

  And how in the loop if the records if I use:

  FOR indx1 IN 1.p_lot_number_list. COUNTY

  LOOP

  BEGIN

  SELECT

  inventory_item_id

  IN

  ln_item_id

  Of

  dummy_lot_tab

  WHERE

  lot_number = p_lot_number_list (indx1); - > how direct the item here?

  EXCEPTION

  WHILE OTHERS THEN

  ln_item_id: = NULL;

  END;

  Records are PL/SQL objects.  They are not the SQL objects.  You can create a SQL TYPE (schema level) as a collection (variable-tables only, tables nested).

  So therefore your first statement is syntactically incorrect

  CREATE OR REPLACE TYPE TEST_VALIDATION_REC IS RECORD
  (order_num VARCHAR2(30),
  inventory_item_id NUMBER,
  reserved_YN VARCHAR2(1),
  error_flag VARCHAR2(1),
  Error_message VARCHAR2(2000)
  );
  

  You must put in an anonymous PL/SQL block or the stored procedure

  DECLARE
  
     TYPE test_validation_rec IS RECORD
     (
      order_num VARCHAR2(30),
      inventory_item_id NUMBER,
      reserved_YN VARCHAR2(1),
      error_flag VARCHAR2(1),
      error_message VARCHAR2(2000)
     );
  
     TYPE vald_tbl iS VARRAY(10000) OF test_validation_rec;
  
     lv_tbl vald_tbl;
  
  BEGIN
  
     lv_tbl := vald_tbl();
    -- insert your code here 
  
  END;
  

• cq57: need help cq57 enter the password administrator or power on password... deisabled system 58555314

  need help cq57 enter the password administrator or power on password... deisabled system 58555314

  Thank you!!!

  @clatimer

  Enter 47433930

  REO

• need help to identify the responsible application of integration...

  Hello

  I'm a guy MSSQL and Oracle is still a little mysterious to me.  I'm looking for assistance tracking the application in an environment that is responsible for special inserts.

  For example, I have 10 different programs running and inserting values to a DB.  I need to know which of them inserts a '0' in a particular column.

  I found a trigger that will tell me the user, unfortunately these programs use a credential that is shared so that it does not help me... here is what I have:

  CREATE OR REPLACE TRIGGER check_for_zero_insert

  AFTER INSERTION

  ON DATA_TABLE_0001

  FOR EACH LINE

  DECLARE

  v_username varchar2 (10);

  BEGIN

  -Find user name of the person making the INSERTION in the table

  SELECT user INTO v_username

  DOUBLE;

  -Insert record into the audit table

  INSERT INTO audit_table

  (instance.

  seems,.

  user name ( )

  VALUES

  (: seems,)

  : instance.

  v_username);

  END;

  But even once, user name will not help me, I need the originating instance if possible (a name of the executable, PID or something to identify the specific application of the other side.)

  There are other columns of information in session $ v - you might find program, machine or a process (PID process) useful.

  declare

  v_user varchar2 (30); v_program varchar2 (64); v_machine varchar2 (64); v_process varchar2 (24);

  Start

  Select the process, machine, program, osuser

  in v_user, v_program, v_machine, v_process

  session $ v where sid = sys_context ('userenv', 'SID');

  end;

  /

• I need help to find the right connection.

  Anyone know what I need to connect my iPhone to my Kenwood KDV-415U 5s? (found here:http://www.manualslib.com/manual/86332/Kenwood-Kdv-415u.html ) I want to hear music that I stream Amazon, on surround speakers in my RV-thanks for your help in advance

  You should be able to use the one below to connect to the USB port on the right side of your Kenwood unit.

  

  http://www.Apple.com/shop/product/MD818AM/A/lightning-to-USB-cable?FNODE=97

• HP Pavilion G7 1070US: need help to identify the version of my laptop's HDMI port

  Hello!

  I'm trying to identify the version of my laptop's HDMI port. The reason for this is - a product that I'm shoping requires the version of HDMI 1.3 port and it does not support version 1.4. My laptop is HP Pavilion G7 1070US and product number is

  LF156UA #ABA

  Thank you for your help.

  Thanks for a quick and helpful response. That helped a lot.

• VPN requirements, need help in selecting the right technology

  I need help choosing correct vpn technology to meet my needs.

  I have a 2801 router I will use for vpn sessions. I use 871 routers of the series for remote clients. The requirements that make it difficult for me to determine how to configure are:

  The IP WAN routers 871 will be dynamic, so I can't use lan to lan standard IPSEC configuration. The solution must allow the connection of any address.

  Remote sites will also have to pass traffic between remote sites. I need to do this, because this VPN will be used for IP phones and I want clients on remote sites to be able to call each other.

  Some of the solutions I've seen require the remote user enter a user name and password of the CLI on their 871 to bring up the tunnel. If it's possible I don't want it's an addiction.

  I am familiar with cisco routers and can usually do a config works if provided an example, but I don't know enough about the various VPN options to choose the right solution. Any help is greatly appreciated.

  Thank you

  If you need a spoke-to-spoke vpn connection as well, you can try DMVPN.

  http://www.Cisco.com/en/us/products/ps6658/prod_presentation_list.html

• I bought an Aspire One opportunity and need help to choose the right RAM upgrade.

  I bought an Aspire One opportunity. On the device, the model number is listed as AO532h-2588. When I enter the S/N and look it up on the Acer website it is listed as AO532h-2Db. I want to move the RAM to 2 GB. Former model, then tried to keep the cheap. I see 200 pin DDR2 667 MHz PC2-5300 SODIMM as given common spec as far as RAM goes. Even through different products of PC. Is this all I get? That the annex-2588 or - 2Db question of difference in the review of correct choice? Thanks for your help!

  I need to stick with 200 pin DDR2 667 MHz PC2 - 5300 SODIMM? Yes

  But I can go up to 800 MHz. good. PC2-5300 and SODIMM is critical to search? No, but it will be worse to run (little).

  Look at the essential link.

• Need help to identify the missing screws from the bottom of my 482PG-V7

  Hello, some of my screws fell off my 482PG-V7 and I was trying to identify who they are so that I could buy them online in laptopscrews.com. I tried to search through the online manual for V7-482PG, but I couldn't find the information.

  I have attached a screenshot here - if someone could help me please identify this it would be great, thank you!

  [under the direction of life private - deletion image which displays the serial number].

  M2.5x6mm should be the ones you need.

• Need help to get the right start!

  Hello

  I have 'given', back to January 1 of this year so far. I am looking for a way to get this info easily and my final result, will be a monthly comparison of the way in which all of my products (9 items) Farouk against each other.

  My products are:

  Plan A - 3 Plans - 1 month subscription $11.00

  -6 month subscription $16.00

  -12 month subscription $21.00

  Plan B - 3 Plans - 1 month membership $10.00

  -6 month subscription $15.00

  -12 months membership $ 20.00

  Plan C - 3 Plans - 1 month subscription $9.99

  -6 month subscription $19.99

  -12 month subscription $29.99

  I'm only interested in the amounts that each plan has generated in a month. I have no need of a customer Base. Since I'm on a new learning curve, my biggest fear is that I begin my quest to wrong-foot!   If anyone can help me get started, it would be greatly appreciated...

  Thanks again

  Ron

  Please post an example of data by copying and pasting the table in this forum.  Please remove sensitive, personal or professional information.

• Need help to identify the router having an offer bundled security or not?

  Dear all,

  I would like to know the procedure to identify that the router having an offer bundled security or not? Please see the details of the router by below.

  Router model: Cisco 2801

  Router software: C2801-IPBASE-M

  Router IOS image: c2801-ipbase - mz.124 - 1 b .bin

  Appreciate your response.

  No, there is no safety device on this device. You need the Image of 'Advanced security functions' for use as a Firewall and VPN functionality. File names are 'c2801-advsecurityk9...' »

  If you just need SSH, there is also a picture of IPBase with the crypto. File names are 'c2801-ipbasek9...' »

• Need help to identify the Magnifier program in "programs," so I can uninstall it.

  I tried to play a movie on my laptop and told me the resolution was off and he couldn't play. Then I learned that a magnifying glass program had already been installed, and I had to uninstall it. However, as I'm not one who has installed, I can't find it in my list of programs. Help, please.

  Ideas: H

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Magnifier is a part of the Vista operating system

  You cannot delete but you can disable it.

  http://www.ehow.com/how_5619980_disable-Magnifier-startup.html

  How to disable a Magnifier on startup

  See you soon.

  Mick Murphy - Microsoft partner

• Need help to diagnose the regular system analysis on iMac - processors maxed out

  I need help to identify the cause of a problem that occurs at least 2 - 3 times per day using my iMac (27-inch, mid 2010) running 10.11.5.

  I will use my iMac and then all at once things will start to really trolling. To the point of being completely unusable. Even if I'm able to move my cursor, then click to drag the windows around the screen nothing does really.

  I have iStat menus running so that can see graphics in my menu bar that all 4 cores are completely overfished. Occasionally, I was fast enough to launch the activity monitor to try to see what applications / services are responsible for, the use of % CPU column is completely empty of values, so I can't identify the culprits in a reliable way. I try to keep that column sorted by % CPU use in the hope that he could reveal something and normally it's the kernel_task who is up there.

  I use a Wacom Bamboo dated Tablet (MTE - 450 has) instead of a mouse, and at one point, I was convinced the pilot of PenTabletDrive it is based on was to blame. I contacted Wacom on this subject, and although there is no known issues they pointed out that although the latest drivers will allow me to use the tablet that they no longer support older devices. I was wondering if there was a problem of communication between the device and a driver that is no longer supported. I installed the latest driver supported for my tablet, but the problems persist.

  It may be interesting to note that, when my computer is in this semi-frozen state, I am able to launch the window enough force and quit all open applications leaving me with only the Finder. I guess that means that there are none of my apps running and it is probably one of the services. If I restart the Finder system grinds to a completely enclosed holt.

  I hope someone can let me know what I can find in the Console or elsewhere to help me finally zero in on what is to blame. I can share a log if that helps.

  Thank you in advance!

  Information that might be useful:

  Kept by I tend to be running: Adobe InDesign, Photoshop, Acrobat (all CC 2015), Mail, Safari with several tabs & Dropbox sync constantly.

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• Need help to modify the Script to find the number of vCPU and reservation of memory in VC

  Hello

  Need help to modify the script so that his can person report to the vc all focus level instead of each level of the Cluster.

  Thank you

  KR

  Try this instead:

  $vmsInfo = Get-VM
  #Creating array to place new object
  
  $reportdata = @()
  
  Foreach ($vm in $vmsInfo)
  {
  #Creating new object
  $vmInfo = "" | Select Name, CPUReservationMHz, MemoryReservationGB
  $vmInfo.Name = $vm.Name
  $vmInfo.CPUReservationMHz = $vm.ExtensionData.ResourceConfig.CpuAllocation.Reservation
  $vmInfo.MemoryReservationGB = $vm.ExtensionData.ResourceConfig.MemoryAllocation.Reservation / 1024;
  #Inserting data into new object.
  $reportdata += $vminfo
  }
  $reportdata