HP Pavilion G7 1070US: need help to identify the version of my laptop's HDMI port

Similar Questions

• Need help to identify the type of object in the loop of pl/sql

  Hello

  I need help to identify the Type of object declared beneath a procedure as shown below:

  I need to pass the parameter to the procedure as a TYPE of OBJECT and also refer to variables of Type Object in a loop

  create or replace type TEST_VALIDATION_REC is RECORD (order_num varchar2 (30),)

  number of inventory_item_id

  reserved_YN varchar2 (1).

  error_flag varchar2 (1).

  Error_message varchar2 (2000)

  );

  CREATE OR REPLACE TYPE VALD_TBL AS VARRAY (10000) OF TEST_VALIDATION_REC;

  PROCEDURE ADD_TO_ORD)

  p_lot_number_list IN VALD_TBL,

  p_ord_number IN Varchar2,

  p_user_id in NUMBER: = fnd_profile.value ('USER_ID'),-change 1.10

  p_responsibility_id in NUMBERS: = fnd_profile.value ('RESP_ID'),-change 1.10

  p_application_id IN VARCHAR2: = 'PO',-change 1.10

  x_error_flag OUT Varchar2,

  x_error_msg OUT Varchar2

  )

  In the above procedure, I had the VALD_TBL. Is it OK?

  And how in the loop if the records if I use:

  FOR indx1 IN 1.p_lot_number_list. COUNTY

  LOOP

  BEGIN

  SELECT

  inventory_item_id

  IN

  ln_item_id

  Of

  dummy_lot_tab

  WHERE

  lot_number = p_lot_number_list (indx1); - > how direct the item here?

  EXCEPTION

  WHILE OTHERS THEN

  ln_item_id: = NULL;

  END;

  Records are PL/SQL objects.  They are not the SQL objects.  You can create a SQL TYPE (schema level) as a collection (variable-tables only, tables nested).

  So therefore your first statement is syntactically incorrect

  CREATE OR REPLACE TYPE TEST_VALIDATION_REC IS RECORD
  (order_num VARCHAR2(30),
  inventory_item_id NUMBER,
  reserved_YN VARCHAR2(1),
  error_flag VARCHAR2(1),
  Error_message VARCHAR2(2000)
  );
  

  You must put in an anonymous PL/SQL block or the stored procedure

  DECLARE
  
     TYPE test_validation_rec IS RECORD
     (
      order_num VARCHAR2(30),
      inventory_item_id NUMBER,
      reserved_YN VARCHAR2(1),
      error_flag VARCHAR2(1),
      error_message VARCHAR2(2000)
     );
  
     TYPE vald_tbl iS VARRAY(10000) OF test_validation_rec;
  
     lv_tbl vald_tbl;
  
  BEGIN
  
     lv_tbl := vald_tbl();
    -- insert your code here 
  
  END;
  

• Hello. I need help to identify the right choice of processor for updating my old PC system.

  Hello. I would be eternally grateful if someone can help me identify the processors will work with my system.

  The HP site says that my system supports up to Pentium 4 Hyper Threading 3.8 GHz processor.

  The main reason is if I install Windows7 operating system.

  I bought a CPU on eBay but it does not work when it was inserted. When you turn on the PC, no light illuminates and the system does not start. When you look at the inside of the case of the processor cooling fan works, but that's all. No lights or anything else, not even the fan starts.

  The processor is a Pentium 4 HT 661 SL96H 3.6 GHz 2 MB 800 MHz LGA775

  My system is...

  Compaq Presario SR1339uk

  Serial number: {removed privacy}

  System number: PS267AA

  Motherboard: Asus PTGD1 - LA

  Chipset: I915P Northbridge

  Southbridge ICH6 Intel i/o Controller Hub 6

  BIOS version: 3.28 23/01/06

  Operating system: Windows XP Home Edition 32-bit

  Any help much appreciated... Thank you...

  Sorry for not being clear. I mentioned all processors in HT 6 series like 64-bit processors supported.

• need help to identify the responsible application of integration...

  Hello

  I'm a guy MSSQL and Oracle is still a little mysterious to me.  I'm looking for assistance tracking the application in an environment that is responsible for special inserts.

  For example, I have 10 different programs running and inserting values to a DB.  I need to know which of them inserts a '0' in a particular column.

  I found a trigger that will tell me the user, unfortunately these programs use a credential that is shared so that it does not help me... here is what I have:

  CREATE OR REPLACE TRIGGER check_for_zero_insert

  AFTER INSERTION

  ON DATA_TABLE_0001

  FOR EACH LINE

  DECLARE

  v_username varchar2 (10);

  BEGIN

  -Find user name of the person making the INSERTION in the table

  SELECT user INTO v_username

  DOUBLE;

  -Insert record into the audit table

  INSERT INTO audit_table

  (instance.

  seems,.

  user name ( )

  VALUES

  (: seems,)

  : instance.

  v_username);

  END;

  But even once, user name will not help me, I need the originating instance if possible (a name of the executable, PID or something to identify the specific application of the other side.)

  There are other columns of information in session $ v - you might find program, machine or a process (PID process) useful.

  declare

  v_user varchar2 (30); v_program varchar2 (64); v_machine varchar2 (64); v_process varchar2 (24);

  Start

  Select the process, machine, program, osuser

  in v_user, v_program, v_machine, v_process

  session $ v where sid = sys_context ('userenv', 'SID');

  end;

  /

• Need help to identify the missing screws from the bottom of my 482PG-V7

  Hello, some of my screws fell off my 482PG-V7 and I was trying to identify who they are so that I could buy them online in laptopscrews.com. I tried to search through the online manual for V7-482PG, but I couldn't find the information.

  I have attached a screenshot here - if someone could help me please identify this it would be great, thank you!

  [under the direction of life private - deletion image which displays the serial number].

  M2.5x6mm should be the ones you need.

• Need help to identify the router having an offer bundled security or not?

  Dear all,

  I would like to know the procedure to identify that the router having an offer bundled security or not? Please see the details of the router by below.

  Router model: Cisco 2801

  Router software: C2801-IPBASE-M

  Router IOS image: c2801-ipbase - mz.124 - 1 b .bin

  Appreciate your response.

  No, there is no safety device on this device. You need the Image of 'Advanced security functions' for use as a Firewall and VPN functionality. File names are 'c2801-advsecurityk9...' »

  If you just need SSH, there is also a picture of IPBase with the crypto. File names are 'c2801-ipbasek9...' »

• Need help to identify the Magnifier program in "programs," so I can uninstall it.

  I tried to play a movie on my laptop and told me the resolution was off and he couldn't play. Then I learned that a magnifying glass program had already been installed, and I had to uninstall it. However, as I'm not one who has installed, I can't find it in my list of programs. Help, please.

  Ideas: H

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Magnifier is a part of the Vista operating system

  You cannot delete but you can disable it.

  http://www.ehow.com/how_5619980_disable-Magnifier-startup.html

  How to disable a Magnifier on startup

  See you soon.

  Mick Murphy - Microsoft partner

• Pavilion g6 1345sx: need help: error from the Bios, failed to scroll down

  Hello

  Nice day

  my laptop have always his intermittent to begin also touch down was already failed ignition and non-functional, there are times that when I right click on desktop it keep scrolling down.

  Thanks in advance for your answers

  Hi @Tachycardia78,

  This is a default function with the volume and starting audits that scans Windows. We cannot change these beeps. I recommend that you turn off the sound.

  If your laptop does not charge and will continuously beep. Here is a link to computer will not start.

  Have you tried at startup to enter BIOS as recommended in the document above?

  Here is a linkto beep codes on startup.

  Thank you.

• Need help to diagnose the regular system analysis on iMac - processors maxed out

  I need help to identify the cause of a problem that occurs at least 2 - 3 times per day using my iMac (27-inch, mid 2010) running 10.11.5.

  I will use my iMac and then all at once things will start to really trolling. To the point of being completely unusable. Even if I'm able to move my cursor, then click to drag the windows around the screen nothing does really.

  I have iStat menus running so that can see graphics in my menu bar that all 4 cores are completely overfished. Occasionally, I was fast enough to launch the activity monitor to try to see what applications / services are responsible for, the use of % CPU column is completely empty of values, so I can't identify the culprits in a reliable way. I try to keep that column sorted by % CPU use in the hope that he could reveal something and normally it's the kernel_task who is up there.

  I use a Wacom Bamboo dated Tablet (MTE - 450 has) instead of a mouse, and at one point, I was convinced the pilot of PenTabletDrive it is based on was to blame. I contacted Wacom on this subject, and although there is no known issues they pointed out that although the latest drivers will allow me to use the tablet that they no longer support older devices. I was wondering if there was a problem of communication between the device and a driver that is no longer supported. I installed the latest driver supported for my tablet, but the problems persist.

  It may be interesting to note that, when my computer is in this semi-frozen state, I am able to launch the window enough force and quit all open applications leaving me with only the Finder. I guess that means that there are none of my apps running and it is probably one of the services. If I restart the Finder system grinds to a completely enclosed holt.

  I hope someone can let me know what I can find in the Console or elsewhere to help me finally zero in on what is to blame. I can share a log if that helps.

  Thank you in advance!

  Information that might be useful:

  Kept by I tend to be running: Adobe InDesign, Photoshop, Acrobat (all CC 2015), Mail, Safari with several tabs & Dropbox sync constantly.

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• need help to update OSX version 10.8.5 MacBook; 2.9 GHz intel core 17, 8 GB 1600 MHZ; confuses greatly - I'm not technical

  need help to update OSX version 10.8.5 MacBook; 2.9 GHz intel core 17, 8 GB 1600 MHZ; confuses many - I'm technically phobic since getting warnings about the updates of other users.

  Here is how to upgrade to the latest version of OSX which is El Capitan.

  http://www.Apple.com/OSX/how-to-upgrade/?CID=WWA-us-KWG-Mac

• Need help to remove the zeros on the right

  Hello.

  I need help to replace the zeros in the string.

  I have a string which is the output of the network packet. There are a few trailing zeros in the package.

  I don't see them in normal mode, but the size of the string tells me that it's bigger then it looks like.

  When I pass in hexadecimal mode, you can see zeros.

  I tried to use the find/replace function allows you to search for 0 and replace it with an empty string constant. But, for some reason any, that he took no zeros.

  I need to stop the string that follows * 69.

  

  Show your code.  You won't find and replace with all zeroes.  These 00 in hex mode they are null characters.  (not printable byte with a value of zero).  You need search and replace on that character.  (replace string should look like 00, when it is set to display the hexadecimal code.

  

• cq57: need help cq57 enter the password administrator or power on password... deisabled system 58555314

  need help cq57 enter the password administrator or power on password... deisabled system 58555314

  Thank you!!!

  @clatimer

  Enter 47433930

  REO

• Need help in using the ActiveX to retrieve a VARIANT

  Need help in using the ActiveX to retrieve a VARIANT.

  Variant is shown as var {VT_Ul1, 1} in debugging

  By using the following

  HR = CA_VariantGetShort (& var, &value);)

  I get 0 for my answer instead of 1.

  Answered my own question.

  VT_Ul1 is an unsigned char and not a short.

• I need help to Flash the bios. I have an Aspire 5810TZ. I start and it just says: "acer".

  I need help to Flash the bios. I have an Aspire 5810TZ. I start and he just says "acer" and goes no further. I went to the download page for BIOS on us.acer.com and it has a zip file with 5 files:
  JM4151135.exe
  IN FLORIDA...
  GPC_V135.bin
  Readme.txt
  FLASH. BAT
  What should I do? I tried to copy the files on a USB key and turn on/off with Fn + ESC key. After the release the power button and pressed Fn - Esc another screen appears after 30 seconds. I gave up and gave her 30 minutes but it does nothing. I read another person that should be flashing power button online. I have to rename one of the files. Help, please!

  Aspire 5810TZ menu of frozen startup.

  I finally understand it.

  I couldn't start a back b/c drive, it me did not start anything.

  I followed this chain of logic:

  -Downloaded the bios (2.35 is the one that worked for me)
  -Find the exe file in the winflash file.
  -Extract the files in archive exe using the 7-Zip program
  -Find the .fd file and rename it to JM41X64. FD (I read in a forum was unique in my laptop)
  -Copied JM41X64. FD and FLASH it is. EXE on a USB
  -A the battery and the hard drive out.
  -With its trendy diet I supported Fn + Esc and that you press the power button once while ensuring that the Fn + Esc has been always held down.
  -J' waited 6 seconds and release the Fn + Esc and seen the flashing flash player
  -After about 10 minutes, restarted the machine and the bios as like new.

  Later, I found that there was a hard drive problem.

  I want you guys should help more. All I needed was the name of the JM41X64 file. FD and you don't know how many hours I put into trying to find how simpy bios flash. It is not that difficult for someone with a b.s. in computer science to learn how. Couldn't we a m.s. back b/c the bios drive was messed up. F12 didn't work.

• Need help now for the live installation

  Need help now for the live installation

  Hello

  As described in the question, I understand that you need help. I will definitely help you however, I would be grateful if you could help me with more information to better understand the problem and resolving it.

  1. What is the problem you are experiencing during installation?

  2. That you install? Any software or operating system?

  3. How you try to install the software/Os/application?

  If you need live support from Microsoft then you can click on the link given below and check if it helps.

  https://support.Microsoft.com/en-us/contactus/

  Hope that this help, please write us back for any further assistance on this point, we will be happy to help you further.