Hello, need help with re install the ambient light.
I had installed the ambient light in my laptop that has hardware problems now (without monitor) and so I uninstalled it and now trying to install in my new laptop. But could not understand how do. Could someone help me with it please?
Refer to the link below:
Lightroom: 5.5 (win),
Concerning
Varun
Tags: Adobe
Similar Questions
-
Hello need help with the opacity mask.
Hello need help with the opacity mask. I hope someone out there can help
I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable. Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).
However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)
The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me? I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.
The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).
Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.
What is the difference here? Not much of a problem, because either way I can release OM to be able to change the grad.
The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.
I hope someone can help. Very appreciated
See you soon
Dave
Dave,
I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.
Illustrator help | Transparency and blending modes
represents the masking objects.
Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.
I think that it is perhaps the issue.
-
I have a Mac Book Pro and I am trying to install the ambient light and I get the error message (205) that my firewall is turned on and is not. My computer is not compatible, or I'm just not doing something right.
Please specify the version of Mac OS for reference. just in case if the procedure below did not work.
N ° 1)
1) click the icon of the Apple menu and select System Preferences, and then click Network.
(2) choose the network that is currently connected to the internet can you Ethernet or Airport (Wireless).
(3) then click on the Advanced button, then click proxies.
(4) slot 'Select a Proxy Server to configure' uncheck all the boxes proxy, then uncheck "Use FTP Passive Mode (PASV)".
(5) then click on the Apply Now button.
Then try to reinstall Adobe Creative cloud,
Always the same?
(1) right click on the Finder on dock icon and select the option "Go - To Folder."
(2) you will get a text box, type in below mentioned command and then press 'return './ etc
(3) it opens the etc folder, please search for the file named ""host " and copy the same office screen.it"
(4) double click on the Hosts file, it will open it with TextEdit.
Let me know if you see any Adobe related as entries in the Hosts file 127.0.0.1 activate.adobe.com... etc?
------------------------------------------------------------------------------------------ -
No entry to Adobe? You can follow the procedure below:
-----------------------------------------------------------------------------------------
Please follow the steps below:
N ° 1)
Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.
(Applications > Utiliites)
Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.
Step 2)
Click on the link below and download & run the cleaning of Adobe tool:
Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up selected."
Step 3)
(1) right-click on the icon in the Finder, then select 'Go - To' folder.
(2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)~/Library
(3) then navigate to Application Support > Adobe
Open file Adobe and trash folders named AAMUpdater and OOBE.
Step 4)
(1) right-click on the icon in the Finder, then select 'Go - To' folder.
(2) you will get a text box, type in the following command and then press the 'return './ Library
(3) then navigate to Application Support > Adobe
Open file Adobe and trash folders named AAMUpdater, Adobe Application Manager and OOBE.
Step 5)
Click on the link below and open Photoshop Elements download link.
Do not close the page, just keep it open.
Download Photoshop Elements products | 10, 11, 12, 13
Click on the link and download file DMG cloud creative Installer directly below and install Adobe Creative Cloud app:
http://trials2.Adobe.com/AdobeProducts/KCCC/1/OSX10/ACCCx3_0_0_74.dmg
-
Hello [need help with exit code 7]
Hello, I am having trouble installing the Premiere Pro and After Effects, the download is canceled without reason and this cloud creative reports "installation-fault read more ' link in this:
Exit code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DS003...
-------------------------------------- Summary --------------------------------------
-fatal error 1, 0 error (s)
-Payload: Adobe first Pro CC 2015 9.0.0.0 {38C72D42-0672-43B1-9E05-E7631684F9A1}.
FATAL: DS003: installation package is possibly corrupt. Download the installer again and try again. (Impossible to extract '2015\payloads\AdobePremierePro9AllTrial\Assets1_1.zip C:\Users\wilmar\AppData\Local\Temp\{3F3A1FCC-6F0C-419D-BAF9-6527D5BAC6FF}\PremierePro_9_ LS20\Adobe Premiere Pro CC' to ' C:\Program Files (x 86) \Common {38C72D42-0672-43B1-9E05-E7631684F9A1} ".) : Error 1392 O land or pasta esta corrompido e ilegivel.)
-------------------------------------------------------------------------------------
Even if I restart the download is not finalized and have the same final repeatedly need help. The only software that has been installed has the Media Encoder, I didn't even want. Thanks I await a response[Title edited... MOD]
you use the cc desktop app to install your adobe programs?
If so, errors ' Exit Code: 6 "," Exit Code: 7 "|"» CS5, CS5.5
If not, Download Adobe Creative Cloud apps | CC free trial Adobe
-
Need help with auto-fill the fields
Hello
I need help with a form that has multiple pages. I have some areas I are duplicated in my document. How I got these fields auto fill throughout the form/paper? For example, I'm going to fname lname, address, telephone, etc... How can I get these fields automatically on the other pages of the form? Is this possible? Any suggestions are welcome.
Thank you in advance.
If it's just a fill operation then make sure the fields have the same name. Then set the binding to the global level and all the fields with the same name will get the same value.
Paul
-
Hello [need help with install Mac]
Hello
I downloaded the software, then, first time of in of the Nations United, the Mac would not open them because it did not recognize the developer. I solved the problem, but now it seems to me that the software be lost because the license number do not correspond...
Do I do, put the software download to the trash and restarted a new download at Adobe car I see my error...
@+
[Title edited for clarity... MOD]
Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work
-If you have a non-Cloud program, you must provide the name of the program to learn more
Some general information for a subscription of cloud
Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud
-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-
Need help with activation of the CC training plan
Hey, I made a purchase order for a comprehensive cloud was created for students and teachers two weeks ago.
1.5 week ago , made the payment but I do not have any new informations and I still can not use any application.
Track version was released. CC cannont find my subsrciption associated with my Adobe ID
Last email that I received said I'll be getting another within 24 hours, still no response.
Order No. AD001694082EDPL
Support information can not help with this problem.
Customer support Adobe please help!
Hi gregnawrat,
My apologies for the delay in response.
I just checked your account and found that you have tried to make the payment by Paypal, Paypal however rejected the transaction.
Please check with them and place a new order, this order is not yet confirmed.
I hope this helps!
-
Please help me I bought a new power supply 780w I had 2 graphics card work in my old pc, but on the new pc they do not fan spins everything well but no screen when I plug my graphics card? What should do?
http://support.HP.com/us-en/document/c04177680
It comes to my pc
I fix thanks for reading. I just had to play in the bios for a bit lol like 2 hours but I did the job
-
Need help with XP installed. stuck at: Intel Matrix Storage Manager Driver
I bought a new laptop 2.0 ghz with blah blah vista but I want to change to XP.
I have
bought a new copy of XP and I'm ready to go, then first question was in
installation the screen says cannot find the installed hard drive.I have
then found some wire somewhere I've lost that said to buy a
external floppy drive and downloaded this floppy driver thingy that I
need to go beyond this stage from the toshiba Web site...FYI driver name: SA200 ACHI F6-1017-XP
That
well work... when he said press F8 if you agree to install XP I almost
wet me anyway after it formatted the drive it asked me this:Insert the diskette labeled:
* Intel Matrix Storage Manager Driver *.
in drive A:
* Press ENTER when ready
WTF tell you laptop? can someone help me please you after this point?
:-(:-(, I want only XP is installed.
So far its been like 3 weeks since I tried to install it
Post edited by: IamMILOS
You just need to install a driver, Intel Matrix Storage Manager.
As the name said it s an Intel driver and can be found on the Intel page or you can download it from the European driver Toshiba page too.
Check your area driver books and search for storage manager or package of robson.I recommend also to search in this forum for similar discussions on Intel Matrix Storage Manager Driver.
Good bye
-
Need help with calibration of the battery
I have a Vn7 - 591 g and it's basically old 1.
My problem is my laptop stop without noticing low battery notification and without any warning since I updated my windows 10 November pro build.
First, it would close down to the level of 15% without indication battery and then I looked at here and there and find the calibration procedure as I tried battery as the load calibration procedures to 100% in stop and go in safe mode and let it drain and recharge again, after the fact that now he stops at the level of battery by 30% or 25% without notice or warning.
I tried battery reset thing pinhole also as suggested somwhere in this discussion.
One thing I noticed when I put my laptop power in High-Performance option, low battery, that it just goes right into hibernation but when I plug in the AC adapter it shows battery 0% or 1%, and perception.
so is it problem in my battery or Power Options or the problem is another?
Any help will be appreciate and please answer quickly because I am sad with this problem. It is a one year old laptop around, I bought new.
Hello
Well, the wear level is quite high for a laptop one year old. Do you often use on the farm?
It is interesting that hwmonitor reads the same amount as that of windows, stop so suddenly, because of the battery not calibrated... I don't think so. It may be the case even if the PCI that controls the battery charging does not correctly read the State. That would mean that you would need to change the battery (the peak is on the battery).
You can try to run battery Eater: http://www.softpedia.com/get/System/OS-Enhancements/Battery-Eater-Pro.shtml
This software will monitor your battery while meeting and then make a graph of it after a reboot. I don't remember if trace the graph based on the percentage, or the actual capacity of the battery.
You can read more about what the software did here:
Also, would probably be a good idea to see if what happens on another operating system as well. For example, you can try to make a USB boot Linux, ubuntu and check if your laptop suddenly stops at the same percentage values. If it is not the case, which is probably something just with windows.
-
Running Windows 7 Professional with XP Mode - need help with access to the XP Mode
Windows 7 Professional and installed XP Mode so I could run my Outlook Express email accounts. I was changing my password xp mode and before I finished putting a new password my computer loses power. Now, I have no way to get xp mode to work (the previous password does not work). Any help on opening the program would help! Thanks advance!
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Windows Virtual PC and XP Mode Forums.
http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads
-
Need help with information about the file
IM and only know basic computer skills. Im having a problem with obtaining correct file information. I only use MS MediaPlayer. I have amassed a decent library. Over the years, I've downloaded music from CD, limewire and what is called a torrent. My daughter would be to get an education, but she managed. Songs from a CD are not a problem, but other sources, the news of music might be incorrect or missing. On my hard drive and the Member for information often is listed as unknown or various artist. I edited the info on the Congressman, but he will not put these songs in order. Always the groups to the title of an album. I can't change the information in the properties. I think I would need to correct the source info in my library, but I don't know how. Any help would be greatly appreciated my OCD insists that my library be in order. Thank you!
Liner,
Musician is working hard and deserves to be paid for their work like everyone else, and unless they offer their recordings for free, whenever you download a torrent or P2P service like Limewire, you're basically stealing their intellectual property and taking food off of their plate.
Most of the people don't post on a Microsoft Forum, ask the help of cataloguing of media that were obtained from these types of sources. In addition, the sources you cite could also distribute unwanted hitchikers (virus, malicious software) as well as the music.
If you buy the CD you got with torrents and Limewire, you would probably best chance to get the metadata. And it would be "the right thing to do."
-
Need help with regard to the audit
Hi all
Im trying to audit the actions of users who access the database.i.e I get requests from users. In the column sqltext from sys.aud$ table im get entries. But the problem is im not getting queries like
Select employee_id in system.employee; (IE queries containing specific attributes to select)
but it is audit queries like
Select * from system.employee;
Select count (*) in the system.employee;
Select count (*) in the system.employee, system.department;
Please help me with this...
ThanxHello
As Justin says: maybe you first want to work on the correct schema.
SYS and SYSTEM schema is not "playgrounds".
It is strongly deprecated by Oracle to create or modify objects in the schema these.Published by: hoek on November 4, 2009 16:34 typo
-
never set up account-need help administrator to install the program
I am trying to install a program that I downloaded, but it says that I need administrative rights to do. I have two user accounts on my system (me, comments). My personal account has Admin rights, but it is not letting me start the download. I've been reading around on how I need to original administrator to perform this task. But I have never set up an administrator account. How to set up an account without having to completely reinstall windows xp? I also tried to make the keys ctrl + alt + delete on the Welcome screen, wrap just got the account and the password forgotten. There is no existing account on my system labeled (Administrator). I also tried the process where you go to the start menu and change the registry. The two processes have been a failure, any comments would be appreciated. I feel that I'm exhausted from answers: (.)
At least we now know that the administrator account exists.
When the login screen appears and displays the choice of user login, try to hit keys Ctrl-Alt-Del twice. This should bring up a screen of regular type computer-component software snap-in connection. Enter the user 'administrator '. and, unless it has been changed, the administrator password is blank by default so leave this box blank and try to connect.
It is possible that the administrator account is disabled. If you connect as long as yourself, bring up the command window and enter the command:
NET user administrator
and check the line "active account". If she says 'No', you can activate the account by entering the command:
NET user administrator / Active: YesSince you don't have administrator privileges, you can reset the password for the administrator account if the empty password does not work. To reset the password, enter the command:
NET user administrator *.
or
NET user administrator password (where "password" is replaced by a chosen password)HTH,
JW -
Need help with timing of the effect!
Hello! I currently own Adobe CS5.5. I have not touched After Effects for awhile now, I would like to use an effect and be able to start and finish the effect whenever I want bascially, but I'm not sure on how to do because it simply works the effect through the entire video I'm editing. Help, please! Thank you!
Easy-peasy! Just set keyframes for the effect to animate properties. The closest together set you keyframes in the timeline, change things faster. You can drag the keyframe around, too.
Maybe you are looking for
-
Search for "blackle". Is there a way to auto-noir the bottom of each page visited?
I like the idea of using a black background instead of white on my devices. I'm saving the planet and my eyes. Is there a way to display all the origins of the auto-noir site? And I suppose that, by extension, the white of the text? I understand the
-
How can I have the list of bookmarks on the screen while I get through it
sometimes pressed the command button remains on the screen for about 10 seconds - I need a longer time to scroll through the list to find specific bookmarks
-
HP Photosmart B110: OCR analysis so I can edit scanend documents in Word format
I can´t find the software I need to scan documents on my Phtosmart so that I can edit the text in Word format. I can only scan the text as images. I think I should use: R: I , but they want me to pay for the software. I h ave wasted a lot of time tr
-
Inifile several elements with the same name
Hello I have a file of similar to an ini file setting. I can read with the toolslib inifile. A [SPLINE] section has a lot of variable, number, lines all begin with DATA =. The line of these data is read as a string. The content is 3 values as input f
-
I can't find the driver for my HP scanjet 3500c scanner