Helmet appear not on the playback devices.

Similar Questions

• Headphones not appearing is not in the playback devices

  There is a headphone 3.5 mm quite inappropriate on my computer, which is oriented toward the front, so if I have for example pull the wire of the headphones a little, unplug headphones in and out of my computer speakers streams sound, my family is asleep probably not want to hear. I checked "Show disconnected devices" and "see the disabled devices" in my reading , in the settings of the its tab. Is there a way to disable the real speakers and just leave the volume of the headset upwards?

  had same problem try this, open your DD realtek audio Manager and go to the options in the upper-left (Cog) click before and back devicesplayback out two different audio streams, hope it helps

• Sony z3 appearing is not in the google Device Manager

  Sony z3 appearing is not in the google Device Manager

  I checked the security rating...

  even with my new Tablet sony z3.

  Strange thing. Are you ready to try the fix? Do it with CCP if you want:

  http://www.sonymobile.com/GB/tools/PC-companion/

• Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  Original title: System reports the NIC does not properly

  Using Vista Home premium on HP pavillion m8075a model RZ555AA-ABG. Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  As none of the problems are met with connection network, do I ignore this warning or try to update the driver?

  Hi eucalyptussurfer,

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  Please see the following article:

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  http://support.Microsoft.com/kb/932520

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• the Airport extreme appears not on the graphic overview

  the Airport extreme appears not on the graphic overview

  Everything plugged and works

  Unable to connect with the personal network

  By graphical overview, I presume you are talking about airport utility?

  Are you using wireless or ethernet?

  You have run diagnostic wireless on your Mac if you use wireless?

  Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac - Apple Support

• HP 15 ac189tu not find the bluetooth device please help me

  HP 15 ac189tu not find the bluetooth device please help me

  PLEASE HELP ME

  Mr President

  I found the solution

  I have install MS 72552.exe

  & his departure find device

  Thanks for supporting.

• Cannot read Psychonauts off Steam error - the game could not create the Direct3d device. Please make sure your video drivers are installed properly

  Original title: Running Win7 on Bootcamp. Error: The game could not create the Direct3d device. Please make sure your video drivers are installed properly.

  I try to play Psychonauts out of steam. I am currently running Windows 7 via Bootcamp on my MacBook Pro 13-inch mid-2010. When I try to run the game, I get the message:

  The game could not create the Direct3d device. Please make sure your video drivers are installed properly.

  I tried to update DirectX, and I tried to download the Nvidia drivers associated with my laptop model. How can I solve this problem?

  Thanks again for the help.

  I'm not familiar with Apple but I found this:

  http://support.Apple.com/downloads/#NVIDIA

  Except that it is what I have from NVIDIA:

  http://www.nvidia.com/object/notebook_drivers.html

  Previously, only the original beta for mobile graphics drivers were available on the NVIDIA site with manufacturers having full control and ownership of the final version.

• Configure button disabled on the playback device, manage audio devices. How can I reactivate the button Configure?

  Hi, following an automatic update of Windows Vista 64-bit I have no sound. Thank you for that.   I had a similar problem before, the sound quality has been reduced to a rate lower than 16 bit 44.1 k.  I've changed this before clicking on the button configure on the playback device, manage audio devices.  But now, this button is disabled and I can't check the set up or make changes.  I am logged in as an administrator user, how to re - activate the button set up?

  Thank you

  Darren

  Hello, I have stopped the Windows Audio Service and rebooted a couple of times.  Now I have his back.

  Thank you

• internal speakers not showing on the playback devices

  Hello
  I got my laptop last week and yesterday, the sound no longer works. The laptop is an ASUS G53SX: i7-2670QM 2.2 ghz. 8 GB OF RAM. GTX 560M.
  I tried to update/reinstall the drivers without a bit of luck. I also tried the system recovery and still no sound. The latest version of the software I have installed is Adobe Production premium 5.5 and The Elder Scrolls V: Skyrim.
  I checked the playback settings, and the projection of one device is Sony-tv 1. I also checked for devices disabled and disconnected but still only Sony-tv.
  Help, please

  Hello

  Have you made changes on the computer before this problem?

  I suggest to run the following Microsoft Fixit tool and check if it helps.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Hope the information is useful.

• Rings of color on 1131 is not appear blue when the associated devices

  Hello

  I have a few 1131 that host SSID wireless, and most work in accordance with the documentation, which means that the color ring is green light when it is waiting for a connection and blue turns once an association is going. We seem to have discovered two AP that begin to light green, and when an association happens they turn dark green instead of blue?

  Please tell me that someone has seen this before. We have also upgraded to the latest version of the firmware on the devices in question and see the same result. I thought I would wager a guess as to what could be the problem but I'm probably wrong. Maybe the filaments that make the blue color are damaged?  Pretty crazy, but let me know if you have seen this before.

  Thank you

  William

  1131 aPs that do not show the color rings appropriate when users are associated are considered as having a hardware failure and need to be replaced. Replace the units with defective color rings.

• AirPlay works do not on the Yamaha device after upgrade iOS10

  After getting the update to iOS10, my Plus 6 iPhone no longer works with my receiver (RX-V679) Yamaha, which has AirPlay connectivity (audio). Before the upgrade of the iOS10, the AirPlay feature worked perfectly, and now, when I tried to connect my receiver, after 20 seconds, displayed an error message when trying to choose the secondary speaker (Yamaha device) on music app.

  He was not on the receiver configuration changes (the firmware is up to date).

  I tried to reset the configuration to the standard values, but without success.

  I tried to reset the configuration of the router (in my network), but without success.

  I restored my iPhone, but without success network configurations.

  My MacBook Pro too (which worked too much on AirPlay with my receiver), now after the upgrade to the Sierra of macOS, lead to works too, appearing in error when try to connect with the Yamaha receiver.

  Someone has to give directions?

  Hi Andresaragao,

  in the case where you have all the answers to this yet, I just spent a few hours, I'll never come back with Apple support and after being up for the specialist wireless, she basically just told me the following,

  'pull up your control from the bottom menu as you would normally access your airtime menu', 'then slide your screen from right to left, your will menu airplay then introduce yourself inside "...

  Wow, you'd think that Apple would make a mention of this when they release a new iOS and make such a change...

  Bernie

• My integrated Webcam is recognized by MAX but not as the IMAQ device

  Hello

  I use with 2014 LabVIEW IMAQ 14 and IMAQdx14.

  I am able to use my webcame MAX both in the Vision Assistant, but when I am trying to generate vi, in the wizard, IEEE1394 Imaging is grayed out.

  When I am using triggered image acquisition and select cam0 as the name of the interface (name of my camera to the MAX), I get the error code:-1074397163 (NOR-IMAQ: the session or the interface passed is not valid.)

  In MAX, I can see and use my camera, but it appears directly in the devices and Interfaces (and not under devices NOR-IMAQ)

  I can't find out if it is compatible live show... Is this to say that my camera is not supported by IMAQ? Is there a way to check whether LabVIEW?

  Thank you

  Karol

  Hi Karol,

  Since you are able to use the camera in MAX, it is DirectShow compatible. The reason why you get this error, it is that your device is not compatible with the IMAQ driver. Instead, you should be using the driver IMAQdx and corresponding IMAQdx live. Once you use those, you should be able to control in LabVIEW. It isn't an IEEE 1394 device either, so I think that it is expected that all options for this would be grayed out. Hopefully that should get you going in the right direction, but please post again if you have problems with the generation of VI you.

  Thank you

  Katie

• Can not find the daqmx device in project

  • In my project, which is great, now I can't access physical peripheral DAQmx using constants, the controls or express DAQ VI help.
  • When I try to use a constant or control [DAQmx physics channel] or [the DAQmx device name] no device appears.
  • LabVIEW stop half the time when I try to open the constant [DAQmx physics channel] or [DAQmx Device Name] project.
  • When I use NI MAX I can see the device, and control.
  • The unit is a box of data acquisition National Instruments M 6289 USB series. I have only this style of machine. I have two of 6289 and have tried both.
  • If I create a new VI not in my project it works.
  • I've updated the NEITHER-DAQmx software on my PC and found no change.

  There the project settings for DAQmx? I can't found.

  Everyone comes through this?

  LabView 2014 f1

  Measurement and Automation explore 15.0

  NOR-DAQmx ADE 15.0.1 support

  NOR-DAQmx Base 3.4.5

  NOR-DAQmx Device Driver 15.0.1

  NOR-DAQmx Max Configuration 15.0.1

  Material:

  Model: NI USB-6289 M Series data acquisition device

  Calibrated: 10 June 2017

  Driver version: 15.0.1f3

  Driver name: NOR-DAQmx

  System:

  Dell Vostro 460

  CPU i7-2600

  memory 8 GB of ram

  Operating system Windows 7 pro

  

  

  This error is cleared after two days.  I'm unable to replicate. regardless of the question has been reset is not a cure.

  It's the second mystery LabVIEW question who cause great suffering which allowed himself without any reason.

• WMP11 XP (11.05721.5280) do NOT use the audio device as the default

  I put WMP to use the default device: -.

  WMP\Tools\options\Devices\speakers\properties\sound playback\default live sound and also tried setting to refer directly to the sound card.

  BUT WMP reads through the integrated sound card.

  Other programs for example 2 WMplayer, Quicktime Player, and Cakewalk Home Studio all use properly the default playback device.

  Read in the past THAT WMP has used the default device - stopped doing this a few months back

  The default device is set to the sound card via ControlPanel\Sounds and Audio devices

  Thank you, Meghmala for having responded to my message.

  After validation, I found that WMP plays through the on-board sound. Other programs via the sound card.

  I went through all combinations of card Onboard Sound and sound to the default playback device (read options\Devices\speakers\properties\sound ControlPanel\Sounds and peripheral Audio and WMP.

  WMP always uses the device specified via its Outils\Options.

  It wasn't the behavior that I noted in my post? fixed by restarting?

  I noticed that WMP does not take into account default value specified in the Panel\Sounds control and peripheral Audioeven if control Panel\Sounds and Audio devices specifies "use only default devices"!

  To sum up, I can now put the reading that I need.

  This message can be now closed!

  Thank you.

• Audio HDMI not listed under playback devices

  My laptop is and Inspiron 15 (3521, end of 2012). This morning, I was with my HD TV as a second monitor. The audio and the video worked. I wanted to switch the audio to the laptop and I accidentally disabled the external audio device HDMI so the portable speaker in 'use of the device' in the tab «General' of the «Speaker Properties» window I went to the dell support page and reinstalled the "Realtek ALC-3221 high definition (HD) Audio Driver ' recommended product for my laptop Dell support page. My internal Laptop speakers work once more, but I can't adjust the audio to the external speakers to my HDTV. The video works but not the audio. Before all this, when I right click the icon audio and selected "Playback devices", both the internal speaker and external speaker HDMI were classified as options. Now, however, only the internal speakers are listed. I just want to know how I can get back the external speakers to HDMI on my playback devices. Any help would be appreciated.

  Hello. Return to the playback of the sound and made properties right-click in the empty area to open the context menu, then click on 'See the disabled devices' and see if HDMI Audio return.