HELP - a clip has been replaced by another of the same number

Similar Questions

• To combine files to PDF, a file has been replaced by another, the program automatically replaces the files? in other words, I did not choose, and it was merged into the document.

  When you combine files to PDF a single file has been replaced by another, can the program automatically replace files? in other words, I has not been chosen, and it has been merged in the document.

  Sorry, I don't have any ideas. This isn't a usual problem. It may be useful to repeat carefully to see if it happens again and check that the files contain what you expect.

• How to recover a document that has been replaced by another

  I typed up a test last week & had another type until today. I wanted to use the same layout I did for the other so I open previous & edited the info according to the numbered question. By chance I hit save him. NOT save as & the new assignment has replaced the last of them. I desperately need one of last week that it is due tomorrow & I won't have the time to type all upward again. In addition, I threw the draft documents (time of bonde) and have nothing to do now as all other material already submitted PLEEEEEEEAAAAASSEEEEE help me. Its a few pass or fail & if I fail, it will say the last 6 years of study have been for nothing. My teacher is a cold hearted troll who doesn't accept excuses.  Please help me =)

  Hello

  ·         What operating system is installed on your computer?

  Response with above information to better help you.

  I suggest you try the option of previous versions and check if you are able to find the file, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows7/previous-versions-of-files-frequently-asked-questions

  If you created the document using Microsoft Word and referring to the Microsoft Word document, I suggest you to send your query to the Microsoft Works community. Please visit the link below to find a community that will support what ask you:

  http://answers.Microsoft.com/en-us/Office

• My Windows Live Hotmail account was stolen and has been replaced by another language.

  my account has been stolen, and now that I have my hotmail page back has been changed to a different language how to change this back to the way it was?

  Hello Bruce,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• How can I find an original document that has been replace by another accident on Windows HP

  I accidentally recorded and answered Yes to the box that says "you want to replace the original by this file. It was the wrong file and now I can't get the original document. I try the search function and can't find the original file, I created and spent 4 hurs edition yesterday.

  Can anyone help!

  I don't know what is Windows HP, but I'll give you the answer that applies if you hear a version of Vista (and some or most of it except the links and snapshot procedures apply to XP as well).

  If it's a Word document, see the following article: http://support.microsoft.com/kb/316951 that applies to situations exactly like this.  It is not impossible, but it is difficult and the chances of success are not very good - but it's worth a try.

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky.  They have so-called saves shadow copies, which are deleted or modified files that can be recovered in case changes/deletions made by mistake. http://www.Microsoft.com/Windows/Windows-Vista/features/shadow-copy.aspx more information about how to use this feature to: http://blogs.techrepublic.com.com/howdoi/?p=145.

  If you have Vista Basic or Premium of Vista, shadow copies is not available; However, there is an alternative that is free and the shadow copies feature called Shadow Explorer. http://www.howtogeek.com/howto/windows-vista/recover-files-with-shadow-copies-on-any-version-of-windows-vista/.  Although it will not help you this time, it could very well save you in case this happens again.

  If it's a Word document and the procedure above does not work, please post in the Forum Word to: http://social.answers.microsoft.com/Forums/en-US/wordcreate/threads where they can have some alternative suggestions.  If it's another program, please identify the program so I can provide advice or references.

  Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• USB-6211: analog input signal affecting another of the same map AI

  Hello

  I use the DAQ-nor-6211 map and DAQmx features to read a hammer and a signal of the accelerometer and then use other LabView functions to make the FFT of these analog input signals. However, it seems that the analog inputs where the hammer and the accelerometer are connected generate a kind of noise or influence in other entries of this data that is not connected to any other sensor acquisition board.

  I've had different experiences in order to check if the problem is with reading the card: put the accelerometer and hit the dog in another table where the DAQ card table was located (to avoid the vibrations on the map and a possible noise), ai1 entry was logged on the differential mode on the dog and the ai4 of entry is connected to the output (z axis) of the accelerometer. The other 2 ai2 and ai3, entries that can also be read by my LabView program, are open (i. e., any other sensor is connected to the card). When the structure where the accelerometer is located is struck by the hammer, the signal of ai2 ("x axis" seen in the first attached document) has a curve (on the time domain) which initialize almost at the same time that the hammer and the a3 of entry has a weak signal, but with the swing as well as the signal of ai4. The document "hammer ai1 + z_axis connected_ _x_axis disconnected ai2 + y_axis ai3 ai4" images that I captured the chart created in LabView. On these graphs, it is possible to check on the FFT the ai3 signal and ai4 has the same behavior (with different intensities), and enlarged figure of time domain image, we can see that the signal of ai2 increase almost at the same time of the signal of the hammer (ai1). The signal picked up by the sensors are probably creating a sort of noise on open entries ai2 and ai3.

  Another experiment was conducted to check if the signal from a single entry that may affect the signal read from each other near the entrances: the DAQmx task Create channel had a physical channel has changed: ai3 entry has been modified by ai7 (maintain the same connection mode: differential), and the results are visible on the second attached document. In the graphs obtained in this experiment, it seems that the entrance of the hammer (ai1) affects the signal of input ai2 and ai7, which are not connected. And the ai4 signal does not seem to influence the other inputs, because he has a different curve on the graph of the FFT.

  The same experiment was conducted using the CSR connection (change threads and create the DAQmx Channel Configuration), but the results were the same as those found using differential connection.

  Finally, if the output of the accelerometer is connected on the ai2, the signal of the other open entries ai4 and ai7 seem to be affected by the signal of the accelerometer on ai2 (last document attached).

  Could you tell me if the problem I encounter is caused by the DAQ card with this information that I gave to you? And if the answer is Yes, do you know if there is a way to avoid this noise create in one entry on the other hand, it please?

  Thank you

  Maybe Ghosting or crosstalk? Just an idea.

• Help my file, bookmarks, tools, etc. has been replaced by the word Firefox in an orange box! How can I change back?

  I'm on a laptop running Windows 7 starter edition and for some reason any my top line, left of the screen used to hold the file, view, Favorites, history, tools, and help has been replaced by the word Firefox in an orange box with a drop down arrow. Of course, I did something wrong, but I can't find any way to get back to where I was.

  Try to right click with the mouse on the top of firefox and select menu bar... Solved?

• My firefox symbol has been replaced by a symbol of paper and a pencil on the doc

  normally I have a Fox around the symbol of the planet. This has been replaced by a couple of sheets of paper and two pencils and a symbol of the sovereign.

  Hi lmmillard,

  I've seen that happen periodically, but it is easy enough to fix. Simply remove the icon from your dock. Then re-create by dragging the Firefox icon in the doc from the applications folder.

  Hope this helps!

• its update is not available for this Apple ID, article has been bought by another user or because it has been refunded or cancelled

  Hello

  I'm updating iPhoto, but I have this message:

  "This update is not available for this Apple ID, article has been bought by another user or because it has been refunded or cancelled.

  Could you help me?

  Thank you

  Stéphane

  Apple is no longer develops and supports iPhoto.

  If you have previously bought iPhoto, it should be in your list of purchases made on the App Store. If you do not see, it may be under hidden purchases. You can try to download it from there.

  Also, try this link:

  iPhoto 9.4.2

• Cannot delete folder: it has been used by another person or program

  Can you help me please.

  How can I delete my folder when its says "' cannot delete the _: it has been used by another person or program" "

  the problem is... it has been unused by another person. What should I do?

  If the news of PML this does not clear the indelible
  problem files... the following freeware can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Unlocker
  http://www.filehippo.com/download_unlocker/

• A service of driver for this device has been disabled. Another driver can provide this functionality. Code 32 (hard drive problem)

  Hello

  I've just moved a CD into my disc drive and noticed that nothing was happening. I went so manually click on the disc itself, and seen that it was completely gone. When you go through the process of troubleshooting in Windows 7, this note came:

  A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32).

  Obviously, I need to re - activate this service, but I am helpless about who or how. Any help would be appreciated!

  Try the following MS KB article:

  http://support.Microsoft.com/kb/314060

  Try following the steps for Windows Vista, which should also work for Windows 7.

• How do I re - install my Photoshop CS3?  My drive hard iMac packed in and has been replaced, the upgrade of the 10.6.3 to 10.10.5 system.  My DVD player now look briefly at my Photoshop CS3 disk and ejects then.  How can I I re - install?

  How do I re - install my Photoshop CS3?

  My drive hard iMac packed in and has been replaced, the upgrade of the 10.6.3 to 10.10.5 system.

  My DVD player now look briefly at my Photoshop CS3 disk and ejects then.

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• I'm trying to download the trial version for photoshop, but it has been slain for hours on the page says download of Photoshop. Can you help me?

  I'm trying to download the trial version for photoshop, but it has been slain for hours on the page says download of Photoshop. Can you help me?

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

• My card has been replaced on my Mac and now my CS4 won't open. I have re-uploaded, gave the serial number, but it will not always be open.  Now what?

  My card has been replaced on my Mac and now my CS4 won't open. I have re-uploaded, gave the serial number, but it will not always be open.  He said that the license has expired.  But this isn't the case.  Now what?

  uninstall, clean (use the CC cleaning tool to solve installation problems |) CC, CS3 - CS6) and then install correctly (do not migrate, use timemachine etc.) using the installation files.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Error - file has been updated by another user. Ask to see change

  Hello
  
  If I save a record in forms (Custom) after this attempt to change or add content in the fields, I get the error below.
  FRM-40654: record has been updated by another user. Re-query to see change.
  
  Please provide the inputs.
  (Form 10g Version, using this form in Oracle Application R12)
  
  Thank you
  Prasanna

  Prasanna,
  Some of the typical causes of this error are:
  1 database column is of type CHAR (?) and forms is of type VARCHAR2 (?). As CHAR() pads type, the length of the Forms data will be cut padded spaces of the value of data when the column is queried in the form. The solution is to update the VARCHAR2 database column so that the data are not completed.
  2 database trigger on the table changes the data in the INS, the UPD treatment or if you have a Post-Ins/Upd trigger that changes the data in the table. The solution is to clear the block and update or change your processing logic to prevent editing the table.
  3. after query trigger on the data block changes something in the base table. The solution is to eliminate the process after query that updates your block element.

  Here are some of the most common causes of this error.

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.