Help: Analyze the apdu SET KEY?

Similar Questions

• Help with the language setting

  I've fumbled while trying to set up my new Clip + and accidentally the language selected Arabic-now I can't change it to English because I can't read the poster! I tried to reset the player by pressing the power button, but when I turned it back on, he was always in Arabic mode.  I can do, or should I learn to read Arabic?  Thanks for any help!

  First, turn off the drive, then turn it back on.

  To access the language setting, press the Home button, which should return you to the main menu.  Highlight the settings icon, then press select.  Press the down button three times to access the system settings option.  It is the last option in this submenu.  Press select.

  Press the down button three times again, and it's the language setting.  Press select, and English is the first choice in this submenu.

• Need help with the property setting.

  Hi all

  I need a help in a drift a property setting.

  We have a HP planning property definition in DRM. Sourceplan which is a defined property type with a default value as plan1.

  I want to make this value of a derived property and add a parameter here inorder to fulfill my obligation i, e

  If a hierarchy is to have a node name containing the string value ABC, XYZ or MNC then it HP. Type of SourcePlan must get filled with value Plan, Plan2 and plane3, otherwise it must be an empty value.

  I need a help on the settings here.

  Thank you

  Madhu

  Try this malfoy-

  If)

  LessThan (Length (ReplaceStr (Abbrev (), ABC, F)), Length (Abbrev (()), Integer).

  Base1,

  If)

  LessThan (Length (ReplaceStr (Abbrev (), XYZ, F)), Length (Abbrev (()), Integer).

  Plan2,

  If)

  LessThan (Length (ReplaceStr (Abbrev (), MNC, F)), Length (Abbrev (()), Integer).

  Plane3)

  )

  )

  Thank you

  Denzz

• M4-1003TX Pavillion: Reinstall windows 8 with the help of the oem product key

  I want to re install windows 8 using the oem product key. I use HP model m4-1003TX. After making USB drive bootable and boot by USB the following message appears - "the product key entered don't match any available for installation windows image.

  Hello

  Your laptop came with Windows 8 64-bit Core edition
  http://support.HP.com/us-en/document/c03743644

  It doesn't matter what you are currently using.

  The product key of Windows 8 is integrated into the BIOS chip. B. I installed Windows 8.1 update in a few of my laptop Windows 8 using the tutorial.

  This means that the reason why the method above does not work, or you didn't follow correctly, either the key of your BIOS is corrupted.

  I suggest you follow the tutorial without delay. Download the media creation tool & later the edition appropriate Windows 8.1 ISO according to the edition of Windows 8 installed on your laptop. For example. Single language edition Core (SL) 8.1 Windows 64 bits.

  Disable secure boot & enable in the BIOS:
  http://support.HP.com/us-en/document/c03653226

  Make USB bootable ISO downloaded and a clean install of the operating system by booting from it.

  Concerning

  Visruth

• Need help with the sRGB setting works correctly.

  After reading a lot of comments from all kinds of sources, I decided for my purposes, it is best to put my Photoshop CS4 in sRGB. The problem I have is that often if I drag and drop an image as a new layer on another image I get a warning asking me if I don't know I "want to convert colors to a destination document with a color profile that does not match the current RGB workspace?"  She continues to tell me that my source is sRGB IEC61966 - 2.1 and that my destination is Adobe RGB (1998) and that the work is sRGB IEC61966 - 2.1.   Given that I put my Photoshop under Edit > settings of colors of sRGB IEC61966 - 2.1 and I have my camera to sRGB color I wonder why the window tells me that my destination is Adobe RGB (1998).  I initially shot in RAW and then open my photos in Camera Raw in Bridge and when I'm done with whatever changes, I want to do I simply 'Open Image' which, of course, it will open in CS4 where colors, is once again, sRGB.  What else do I need to change to get all operating under colour adjustment sRGB?

  Thanks for any help you can give.

  The color camera setting applies only to JPEG files as you shoot.

  If you shoot in RAW, then your image has a color space that is applied until you open it in Photoshop.

  At the bottom of your Camera Raw window is a hot blue link. Click it to open the workflow Options.

  Here, you can change the color space, Bit depth. Size and resolution that your image open in Photoshop.

  These settings in ACR to override settings you have for your default color space in Photoshop

  .

  Post edited by: Bo LeBeau
  changed color in the color space mode,

• Compaq Presario SR2177 BSOD Win 7 - help analyze the .dmp file.

  New installation of Win 7 Home Premium, Compaq Presario SR2177CL.

  AMD X 2 3800 + 2 GHz Dual-Core CPU

  1 GB of DDR2 Ram (2 x 512)

  HDD Sata 200 GB WD

  After a clean, led installation to all updates MS blue screens started.

  MemTest 86 +: pass

  HARD drive test: pass

  Last crash dump file is here:

  https://SkyDrive.live.com/?CID=e714ffc82e58b1a6#CID=E714FFC82E58B1A6&ID=E714FFC82E58B1A6%21174

  As noted, this is a clean install, online only for MS. updates I tried to parse the file .dmp myself, but certainly need some help here.

  Power supply tested ok without ceiling blown on the Council, the onboard video, the lan & sound. No cards installed.

  Blue screen appears almost immediately once the initialization is complete.

  Thanks in advance for any suggestions.

  PDI

  Stop 0 x 124 is a hardware error
  If you are overclocking try to reset your settings to standard processor and see if that helps.
  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:

  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.

  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).

  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.

  (4) update the BIOS of your motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.

  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.

  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use diagnostics from built-in memory (run MDSCHED) or the utility memtest86 3rd - party to run plenty of evidence of hours of testing.
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.

  
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:

  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.

  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• Please help find the serial number for Adobe Creative Suite CS 5.5

  Buy Adobe Creative Suite CS 5.5 on an Apple Store at 20/08/2011. Part Number: H5958LL/A. I received and can not find the serial number Adobe to reinstall the software on my new computer, now that it has been stolen. Please help me

  Yoav

  < deleted by the moderator >

  Hello

  You can access the following link and go through the steps to get the product serial key Adobe CS 5.5.

  Find the serial number of your Adobe product quickly

  You can also contact us at the Support from Adobe on the cat to be helped in the series license key.

  Contact the customer service

  Thank you.

• recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  1B. double-click the executable file to run the tool.

  2. after running the tool, click the Windows tab, and then click copy in the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the following forum and paste the results of the WGA diagnostic data in a post detailing the problem: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Help using Léonie / old Toad move the text of "Key words" in "securities".

  Need help to use leonie / old Toad move the text of "Key words" in "securities".

  I have about 30 000 images with keywords but NO Title.  I want to move / copy the text in the keywords section in the section of the title.

  So, I tried this Script: Add keywords to title - Script of Léonie field

  He did a little work, but not completely.

  When I select an image in Photos, and then "Get Info" I'll see below in the title area, notice that the first two lines are the same.

  IMG_2621.JPG

  IMG_2621.JPG

  March 12, 2014 14:23

  My keywords are: Experimental engine 17 to 600 hours

  AFTER I run the Script, I get the following:

  IMG_2621.jpg - 17-600 hours experimental engine

  IMG_2621.JPG

  March 12, 2014 14:23

  I need is:

  17 to 600 hours experimental engine

  IMG_2621.JPG

  March 12, 2014 14:23

  I do not understand why the Photos shows the name of the file twice.   These fields are not labelled, but I was under the impression that the top line was the Description, the second line is the name of the file, and the third line is the Date.   Because only the first line is displayed under thumbnails, I try to have as much descriptive information appear in this area (as in the past, we could do with iPhoto or Aperture).

  In other words, when I run the script I hold my keywords to replace everything in the top line completely, eliminating the name of the file. Is there something wrong with this approach?  I would still have the name of the file to the second line, right?

  Thank you.

  Remove the file name of the title field, and then run the script. You will have the chance

  -17 to 600 hours experimental engine

  You can manually delete the "-" at the beginning or modify the script.

• Jerky mouse mouseover function for all while the menu (file, options, help) and the key back/forward/home too. More scrolling is choppy every Web site.

  Jerky mouse mouseover function for all while the menu (file, options, help) and the key back/forward/home too. More scrolling is choppy every Web site since the update to version 3.6 to 4 RC1.

  Gel mouse pointer when it comes across objects that use some sort of animation or gradual highlighting when hovering on (which is basically all the Firefox 4 items menu, tabs, etc.) But also a lot of things on the Web pages as the green buttons on this page that change color when you hover over them).

  After rebooting my system, however, the problem seems to have disappeared!

  [, WinXP SP3 - 4 GB RAM, Core i5 M520, driver Nvidia NVS3100M 6.14.12.5738, Firefox 4.0]

• help with the beats on my envy 17-3270nr, n key

  help with the beats on my envy 17-3270nr key. recent Smart hard disk crash, replaced with exact same hitachi drive, same care extended warranty repairs covered of the Frys. Windows 7 Edition home premium w / service PAC 1 installed, drivers installed, except that now there is no volume of beats on screen graphic dial button, click the button on top button on the page does not call the beat of the application settings. Futhermore; the motion sensors of laser to activate the keyboard backlit keyboard do not work.  Are there drivers hp software to enable the missing features?

  Hello

  Download and install the following.

  HP OSD utility.

  Proximity sensor driver.

  Once completed, restart the laptop.

  Kind regards

  DP - K

• How to set up the Alt - Tab key so that it can take you on the desktop as well?

  Now I can only switch between different applications. Thanks for your help!

  Hi yelvsusesu,

  In Windows XP, you don't have to use the Alt + Tab key to display the desktop.

  This feature is called Flip 3D, which is part of the Windows Aero in Windows vista experience and systems Windows 7 operating.

  Here are the options available in Windows XP to show the desktop.

  • Press the Windows key + D logo on your keyboard.
  • Right-click on the Windows task bar and then click show the desktop or click Show open windows.

  How to re - create the Office see the Quick Launch toolbar icon in Windows XP

  http://support.Microsoft.com/kb/190355

• Windows Vista IE9 is is it inserted a way I can set up the so function keys when I click my e-mail address?

  Windows Vista IE9 is is it inserted a way I can set up the so function keys when I click my e-mail address?  THANKS in advance

  See my response here

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/macro-recording-in-Vista/ef061942-8665-4d27-9222-dcd761936386

• need help to find the windows vista key

  need help to find windows vista key product I lost my kit, but I have windows vista cd/dvd. Please answer me as soon as posssible, thank you

  http://magicaljellybean.com/KeyFinder/

  Use the program above to find the product key in your operating system Vista running and active.

  If a desktop computer: Watch next or back.
  If a laptop: look on the underside.

  If a recovery disk, most of the manufacturer's recovery disks do not need a product key to get back to factory settings.

  This is the limit of the help that we can give you a missing product key.

  See you soon. Mick Murphy - Microsoft partner

• Windows 7 will not be activated. With the help of a legitimate license key.

  Windows 7 will not activate... With the help of a legitimate license key.

  Have you tried to activate by phone?

  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP