Help before dialing

Similar Questions

• TC7 SX20 manually select the Protocol to call before dialing the remote

  Hi, I found that after upgrading my sx20 to TC7.1.1, I couldn't select protocol to call before dialing. If I select recent calls, there is an option called "edit before call", however, when I click on it with remote control, it simply allows for me to change the composition of number but not allow me to choose which protocol to use. I can select protocol to call before dialing on the web interface. How can I choose the Protocol to call during a call with the remote control? Thank you

  Hmm, you're absolutely right, never noticed this before us does not normally use the remote control to call connections. Anyway, been playing with it for a while this morning and not, the memorandum of appeal cannot be specified or changed, only the rate of appeal using the tab at the bottom of the screen. (It's using TC7.2.1).

  Guess the system configuration to use 'Auto' as the default calling Protocol and let the system decide what to use will be your best option.

  Otherwise, you will need to create entries in the local directory through the web gui and specify the protocols etc it.

  Suggest you to contact your local Cisco representative and submit a feature request to make this option available.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• Need help basic Dial Plan

  Hello

  I have a dial enough (basic) issue of regime.  I need all incoming calls to the PSTN to directly access our standard of Auto number express unit which is currently extension 502.  I thought I had set up properly in CME (8.6), but I get a message that the number is not reached.  Any help is appreciated as I may have missed something. Here is the abbreviated Config:

  Current configuration: 12212 bytes
  !
  ! Last configuration change to 14:11:35 PST Tuesday, August 26, 2014 by routeradmin
  ! NVRAM config last updated at 14:11:37 PST Tuesday, August 26, 2014 by routeradmin
  ! NVRAM config last updated at 14:11:37 PST Tuesday, August 26, 2014 by routeradmin
  version 15.1
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  encryption password service
  !
  hostname voicerouter
  !
  boot-start-marker
  boot-end-marker
  !
  !
  map of type t1 0 0
  Select the secret 4 t3Ic8qb5ewMDWvTa4L9l1WMKprop/NnpCj9WtdkqGGc
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authorization exec local logon
  AAA authorization network local logon
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  !
  clock timezone PST - 8 0
  clock to summer time recurring PST
  network-clock-participate wic 0
  network-clock-select 1 T1 0/0/0
  !
  No ipv6 cef
  IP source-route
  IP cef
  !
  !
  !
  DHCP excluded-address IP 192.168.8.1 192.168.8.19
  !
  IP dhcp pool owhvoip
  network 192.168.8.0 255.255.248.0
  default router 192.168.8.1
  option 150 ip 192.168.8.1
  Rental 30
  !
  !
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  !
  primary ISDN switch type - or
  !
  Crypto pki token removal timeout default 0
  !
  !
  voice-card 0
  dspfarm
  DSP services dspfarm
  !
  !
  !
  voip phone service
  h323 connections allow h323
  allow connections h323 to SIP
  allow connections sip h323
  allow sip to sip connections
  Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none
  !
  the voice of class custom cptone jointone
  Conference of two colors
  frequency 600 900
  300 150 300 100 300 50 Cadence
  !
  !
  !
  !
  translation of the voice-rule 1
  rule 1 /9400/ /502/
  !
  voice translation-rule 2
  rule 1. * / /5415489400/
  !
  !
  voice translation-profile Inbound_Calls_To_CUE
  translate 1 called
  !
  Local-ILD voice translation-profile
  definition of call 2
  !
  !
  license udi pid CISCO2911/K9 sn FTX1641AHX3
  HW-module pvdm 0/0
  !
  HW-module sm 1
  !
  !
  !
  username routeradmin password 7 091649040910450B 41
  username privilege 15 password 7 cmeadmin 03104803040E375F5E4D5D51
  !
  redundancy
  !
  !
  !
  !
  controller T1 0/0/0
  long CableLength 0dB
  time intervals PRI - Group 1-10, 24
  !
  security of the zone of confidence
  the internet security zone
  zone-pair security trusted internet source of internet destination
  zone-pair source security not reliable-is trust internet destination trust
  !
  !
  !
  !
  !
  !
  !
  interface Loopback0
  IP 192.168.17.1 255.255.248.0
  !
  the Embedded-Service-Engine0/0 interface
  no ip address
  Shutdown
  !
  interface GigabitEthernet0/0
  Description Internet
  DHCP IP address
  no ip redirection
  no ip proxy-arp
  Shutdown
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/1
  IP 192.168.8.1 255.255.248.0
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/2
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface Serial0/0/0:23
  no ip address
  encapsulation hdlc
  primary ISDN switch type - or
  ISDN incoming-voice
  No cdp enable
  !
  the integrated-Service-naturel1/0 interface
  IP unnumbered Loopback0
  the ip address of the service module 192.168.17.2 255.255.248.0
  ! Application: CUE running on NME
  Service-module ip default gateway - 192.168.17.1
  No keepalive
  !
  IP forward-Protocol ND
  !
  IP http server
  local IP http authentication
  no ip http secure server
  IP http path flash:/cme-gui-8.6.0
  !
  IP route 192.168.17.2 255.255.255.255 integrated-Service-naturel1/0
  !
  !
  !
  !
  !
  !
  flash TFTP server: apps31.9 - 3 - 1ES26.sbn
  Flash: term31.default.loads TFTP server
  flash TFTP server: SCCP31.9 - 3-1 SR 4 - 1s .loads
  Server TFTP flash: jar31sccp.9 - 3 - 1ES26.sbn
  flash TFTP server: dsp31.9 - 3 - 1ES26.sbn
  Server TFTP flash: cvm31sccp.9 - 3 - 1ES26.sbn
  flash TFTP server: cnu31.9 - 3 - 1ES26.sbn
  !
  !
  !
  control plan
  !
  !
  voice-port 0/0/0:23
  !
  !
  !
  profile MGCP default
  !
  SCCP local GigabitEthernet0/1
  SCCP ccm 192.168.8.1 identifier 1 version4.0
  SCCP
  !
  SCCP ccm group 15
  associate the ccm 1 priority 1
  register the associated profile 1 CFBOWH
  attempts of KeepAlive 5
  !
  Dial-peer voice voip 500
  destination-model 5...
  session protocol sipv2
  session target ipv4:192.168.17.2
  SIP DTMF-relay-notify
  Codec g711ulaw
  No vad
  !
  voice pots Dial-peer 10
  translation-profile entering Inbound_Calls_To_CUE
  !
  Dial-peer voice 20 pots
  translation-profile outgoing Local-LTD
  destination-style 9...
  port 0/0/0:23
  !
  !
  !
  !
  access controller
  Shutdown
  !
  !
  phone service
  Protocol ipv4 mode
  conference material
  Department of Health-folder-buffer 90
  No auto-reg ephone
  authentication credentials cmeadmin tshbavsp$ $4
  Max-joined 50
  Max - dn 200
  IP source address 192.168.8.1 port 2000
  dnis dir-search service
  delays of transfer-reminder 30
  Oregon's wild harvest message system
  URL of http://192.168.17.2/voiceview/common/login.do services
  URL authentication http://192.168.8.1/CCMCIP/authenticate.asp
  location of the cnf file flash:
  load 7931 SCCP31.9 - 3-1 SR 4 - 1s .loads
  zone schedule-5
  time format 24
  voice mail 500
  MAX conferences 8-6 win
  application of system call-Park
  ground of appeal forwards. T
  Department of health flash: / moh.wav
  Web admin system name cmeadmin secret $5 1$60ro$u.0r/cno/OD2JmtvPq4w9.
  DN-webedit
  transfer-figures-collect-orig-call
  transfer full-consult system
  transfer-model. T
  Standard AEC
  create the files-cnf version-stamp 7960 26 August 2014 12:49:29

  Hello

  Can you try to add your pots peers 10 dial

  !
  voice pots Dial-peer 10
  / / DESC * MATCH INCOMING CALLS *.
  translation-profile entering Inbound_Calls_To_CUE
  incoming called-number.
  port 0/0/0:23
  !

  Then repeat the test

  Concerning
  Alex

• Help before I get crazy

  Hi, I'm doing a flash banner in CS3 with tag click following the instructions below

  A. Flash MX 2004, Flash 8, Flash CS3 Instructions:
  1 create a new layer of background; make the full size of the pixels of the announcement and fill it with the desired background color.
  2. click once on the new layer to select - then right click and choose "convert to symbol...". »
  3 under 'Type' select 'Button.
  4 the symbol of the give it a name (like a click Through) and click OK.
  5 make sure that your button is selected, and then open the Actions panel and fix the following button script
  on (release) {}
  If (clickTAG.substr (0, 5) == "http:") {}
  getURL (clickTAG, clickTARGET);
  }
  }

  I do exactly as it says in the statement, but it does not work. Have spent hours now make over and over again.

  I got models of society but they must be in a newer version and they cannot convert for me.

  Is there someone who could help? The banner I created and the models I have is in this folder

  https://sth-se.diino.com/maritha/Flash pwd: Vincent

  If you could help or tell what is wrong in the test file or convert one of the two other files in CS3, I would be more than happy. Just now, I don't know what to do. I feel completely stupid... did it so before banner with another script and they work, but if I change this script to that above banner is more clickable.

  Thanks in advance to anyone who can be useful

  Hello

  "clickTAG" is the variable that will be set as 'http://www.google.com'.

  Ok. The value will be passed to html. You must check this string value in delivery.

  Your Code is correct. But the State gets failed.

  Pls find the below code

  HTML

  
     
  

  ActionScript

  on (release) {}
  If (_root.clickTag.substr (0, 5) == "http:")
  {
  getURL (_root.clickTag, "_blank");
  }
  }

  I hope this will help you. See you soon... (-_-)

• Saving a file of the APEX help before the process of Header error

  Hello
  
  I am current trying to simply allow the user to download and save a text file after pressing a button on a page of the APEX. Links to a new page which does nothing except button perform a process before header containing the following pl/sql code:
  

  begin
  
  -- Set the MIME type
  owa_util.mime_header( 'text/plain', FALSE );
  
  -- Set the name of the file
  htp.p('Content-Disposition: attachment; filename="alphafile.txt"');
  
  -- Close the HTTP Header
  owa_util.http_header_close;
  
  htp.prn('Hello World');
  
  htmldb_application.g_unrecoverable_error := true; 
  
  end;

  When I then press the button to access this page, I get a blank page which shows:
  
  Content-type: text/plain; Charset = UTF-8 Content-Disposition: attachment; filename = "alphafile.txt" Hello World
  
  Any help is greatly appreciated.
  
  Kind regards
  
  Alex

  Hello

  I think you should do application process state for example PRINT_FILE, and then the url button

  f?p=&APP_ID.:&APP_PAGE_ID.:&SESSION.:PRINT_FILE
  

  For this application process "on the load before the heading" need you from your code

  Or try htp.init place start your code

  Hope that helps

  BR, Jari

  Published by: jarola on January 12, 2010 21:40

• I lost my send button-I-I need to download Thunderbird 17 to get help before trying the solution?

  I hit a button by accident and my send button is missing. Assistance idea was to use the "application menu" on thunderbird 17; " There were specific steps - but I don't know the version of Thunderbird, I now.
  y at - it an easier way to return the button send?-if I have to download thunderbird 17 first, fine, but I need help to do that, too.
  It's a most bothersome thing--this is the second time this has happened - why is it such a not vulnerable problem - why the toolbar disappears so easily?

  In the main menu of the compose window bar:
  Display - toolbars
  Check the 'Composition Toolbar'.

  In the case where the menu bar is hidden so press Alt or F10 to bring it back.

  I don't know what you're doing to your menu bar disappears, but is really not difficult to bring him back.

• Help before you buy the new r4

  Hi all
  I would buy the new Alienware 17 and I want to know if the bios is locking to avoid installing windows 7 or Ubuntu? I intend to remove the Win10 and install Win 7, Win10, Ubuntu, and maybe a hackintouch. I did some research and some say it's the Secure Boot that who manages, but I have never has a laptop I don't know if it's true.
  It's my first Alienware.

  www.Dell.com/.../Alienware-17-Laptop

  Hello.  I don't think that the BIOS itself is locked to any BONE, at least in a way that you can't turn off.  The biggest problem you'll have is to find drivers that work.  Intel went to bed with Microsoft of processors and chipsets before will not fully support or support at all, nothing below windows 10.  If you can find the drivers for the components inside the computer that works with Windows 7, then you shouldn't have any problem installing windows 7.

• Speakers/HP playing HELP before analog Panel Jack & left panel 3.5 MM Jack!

  For some reason, a couple days ago I fell on my laptop (HP Pavilion Sleekbook 14) and decided to listen to spotify just to wake me up, etc. As I begin to play with my headphone plug, I hear the sounds coming from my headphones AND speakers, (front), I was really confused about this and thought it was a simple mistake, so I thought that I fixed it by restarting it and unfortunately it did not work. So I looked up to about it thinking that it was the helmet or something on the RealTek Audio Manager and I looked up different issues such as ' helmet and portable playing at the same time "and many others. I searched for hours and hours. The next day, I dropped. Today, I decided to give it another go. After 3 or 4 hours (look for solutions since 12:00 and from typing this 04:00) and I discovered that information from jack "Speakers/HP" was: taking analog front panel and left panel 3.5 mm Jack. While I was looking for this for about 15 minutes. And decided to this post. If you can help, please respond!

  Hello Pepe,

  Thanks for the reply.

  Yes you are right, it could be a problem with the connection, but just to make sure that you can try to do a system restore at 12/03/15 and check. Please Note If this is a problem with OS, restore will fix it and if it something to do with the material, the question will persist.

  Information about the system restore and how to refer to the link below:

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  Refer to: restore your PC to an earlier point in time.

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Hope this information helps, for assistance please answer.

• Please help before I go out the rest of my hair!

  Hello
  
  I tried very hard to understand what is the problem that I was. Basically I'm loading an external XML file into my FLEX application. I add/change/delete functions that fundamentally alter the existing XML tree. Everything is impaired fine, when I use Alert.show () to display the modified XML that's exactly how I wanted it. When it changes I sent using http service to a PHP script which simply replaces the existing with the new modified XML file. However, it seems that it will not send the data XML, though it will send from the other values. I tried to copy the output XML file and place it in the PHP file and it works fine. There is certainly something wrong, when the XML formatting is sent to the PHP script. I tried many combinations of. toString() and. toXMLString(). It seems complex XML won't work, because I only had problems with this technique by using the rich text editor and XML complex, such as the following structure...
  
  < Items >
  < blog >
  < date > < / date >
  < title > < / title >
  < content > < / content / >
  < comment >
  < comment >
  < name > < / name >
  < date > < / date >
  < title / >
  < content > < / content / >
  < / comment >
  < comment >
  < name > < / name >
  < date > < / date >
  < title / >
  < content > < / content / >
  < / comment >
  < / comment >
  < / blog >
  < / Articles >
  
  My Flex page looks like this:
  <? XML version = "1.0" encoding = "utf-8"? >
  "" < mx:Box xmlns:mx = ' http://www.adobe.com/2006/mxml " width ="100% "height ="100% "creationComplete ="sendXML ()">
  < mx:Script >
  <! [CDATA]
  
  Import
  Import mx.controls.Alert;
  Import mx.rpc.events.ResultEvent;
  Import mx.rpc.http.HTTPService;
  Import mx.collections.XMLListCollection;
  
  Objects
  private var sendRequest:HTTPService = new HTTPService();
  private var updateRequest:HTTPService = new HTTPService();
  private variable var: Object = new Object();
  private var requestXML:XML = new XML();
  private var requestList:XMLList = new XMLList();
  [Bindable] private var requestData:XMLListCollection = new XMLListCollection();
  
  Bindable
  [Bindable] private var blog_date:Date;
  [Bindable] private var blog_title:String;
  [Bindable] private var blog_content:String;
  [Bindable] private var blog_ID:int = 0;
  [Bindable] private var blog_total:int;
  
  Accessors
  
  Methods
  private function sendXML (): void {}
  sendRequest.url = XML/blog.xml"."
  sendRequest.resultFormat = "e4x";
  sendRequest.send ();
  sendRequest.addEventListener (ResultEvent.RESULT, loadXML);
  }
  private void loadXML(event:ResultEvent):void {}
  requestXML = event.result as XML;
  blog_total = requestXML.blog.length ();
  Display();
  }
  private void show (): void {}
  blog_title = requestXML.blog [blog_ID] .title;
  blog_date = requestXML.blog [blog_ID] .date;
  blog_content = requestXML.blog [blog_ID] content;
  }
  private void next (): void {}
  If (blog_ID + 1 == blog_total) {}
  Alert.Show ("no more");
  } else {}
  blog_ID ++;
  Display();
  }
  }
  private void previous (): void {}
  if(blog_ID >0) {}
  -blog_ID;
  Display();
  } else {}
  Alert.Show ("no more");
  }
  }
  private function addBlog (): void {}
  blog_date = input_date.selectedDate;
  blog_title = input_title.text;
  blog_content = input_blog.text;
  requestXML.prependChild (< blog > < date > {blog_date} < /date > < title > {blog_title} < /titre > < content > {blog_content} < /content > < comment > < comment / > < / comment > < / blog >);
  updateXML();
  }
  
  public function editBlog (): void {}
  requestXML.blog [blog_ID] .title = input_title.text;
  requestXML.blog [blog_ID] .date = input_date.selectedDate;
  requestXML.blog [blog_ID] content = input_blog.text;
  updateXML();
  }
  public function deleteBlog (): void {}
  delete requestXML.blog [blog_ID];
  updateXML();
  }
  private function updateXML (): void {}
  variables.action = "edit_blog";
  variables.xmlString = requestXML;
  updateRequest.url = "PHP/actions.php";
  updateRequest.send (variables);
  updateRequest.addEventListener (ResultEvent.RESULT, updateComplete);
  }
  private void updateComplete(event:ResultEvent):void {}
  Alert.Show ("Blog updated");
  Display();
  }
  []] >
  < / mx:Script >
  < mx:Label text = "" title: "/ >"
  < mx:TextInput id = "input_title" text = "{blog_title}" / >
  < mx:Label text = "" Date: "/ >"
  < mx:DateChooser id = "input_date" selectedDate = "{blog_date}" / >
  < mx:Label text = "" Blog: "/ >"
  < mx:RichTextEditor id = "input_blog" width = "700" height = "400" text = "{blog_content}" title = "view Blog {blog_ID + 1} of {blog_total}" / > "
  < mx:ApplicationControlBar width = "820" >
  < mx:Button label = 'former Blog"click =" previous () "/ >"
  < mx:Spacer width = "100%" / >
  < mx:Button label = "Add a Blog" click = "addBlog ()" / > "
  < mx:Button label = "Edit the Blog" click = "editBlog ()" / > "
  < mx:Button label = "Remove the Blog" click = "deleteBlog ()" / > "
  < mx:Spacer width = "100%" / >
  < mx:Button label = "Next Blog" click = "next()" / > "
  < / mx:ApplicationControlBar >
  < / mx:Box >
  
  Please help, I've lost so much time trying to figure this! There must be a problem formatting, I'm not aware of it's prevent complex XML are passed to the PHP when simple XML works very well...
  
  Thanks in advance
  Jesse

  How is it still solve my problems to write after finally viewing, when I try for days!

  The reason for which all along was because I was using GET instead of POST! GET apparently cannot handle the amount of characters and I never use GET, but the only time I decide to it affects me 10 hours back!

• help before insertion Tigger

  Hai all,
  
  I'm trying to sequence/Trigger for the next issue of auto
  and the following error message this am
  any help?
  
  Thank you
  RCS
  --------
  DECLARE
  CURSOR crseq IS
  SELECT seq_GROUP_MSTR. NXTVAL
  FROM DUAL;
  BEGIN
  CR OPEN;
  CR FETCH IN: GROUP_MSTR. GROUP_ID;
  PROXIMITY cr;
  END;
  ---------
  error 302 to line 3, column 27
  component 'NXTVAL' must be declard
  SQL statement ignored
  "CR" identifier must be declard
  --------------

  (1) build your form on this query...
  (2) create an opinion on this request

• Need a little help before buying it?

  Hey guys.

  I am close to buying a PC with these specs:

  Intel Core i7 - 5820 k 6x3.30 GHz, 15 MB cache

  ASUS X 99 - A Socket 2011 V3

  32 GB DDR4-2133 Quadchannel RAM

  SSD crucial 250 GB + 3 TB Seagate Barracuda (7200 RPM, 6 GB/s)

  ASUS Geforce 2Go GT730

  I want to use the computer for Premiere Pro and AE. Formats will be mainly ProRes and 4 k images.

  I probably upgrade the GPU. So the question is:

  What GPU should be to this computer?

  Thank you for your time.

  a 970 gtx would be a good match. If you plan to use many effects gpu and a large number of color lumetri settings, consider the faster gtx models.

  You can get version 3.1 USB of this motherboard for a little more.

  Make sure that you get good food, big radiator/fan and case with a good air circulation to overclock the cpu too.

  I would like to swap the crucial for an evo 850 samsung or pro, as samsung ssd is the fastest and sustainable.

  You can add another ssd for a dedicated player cache

  don't get 3 TB of seagate disks, some of their models have extremely high failure rates. any other brand would be much better.

• Tecra S1: How to configure the connection of modem to dial upward

  Hi all

  Would someone be able to help me how I should configure the modem connection to dial upward, I tried to do it through the connection of the Wizard but it does not dial a number and I have no idea what could be the problem.

  Would be very grateful for help.
  Thanks, Nathan

  Hello

  Do you get any error messages?
  The Connection Wizard is very simple and I don t know what you could do wrong during the installation procedure.

  Hmmm please check the option in the properties of the modem so wait for dial tone before dialing is not checked.
  If everything is ok, try to create switched again and ensure that all parameters are good. Just test everything again.

• Dial-up does not not-&gt; error 680

  Hey everybody.

  Not sure can someone help, but the laws gave me their laptop to update on my broadband connection. After I updated everything that I brought it regularize their and their dial upward would no longer work.

  It keeps the error 680. Its not picking up a tone. I checked the number it should consist the correct sound. I followed the troubleshooting, nothing helps.

  Thanks again for any help you can provide.

  Hello

  First check if the modem is properly recognized in Device Manager.
  If so, the modem driver has been installed correctly and that there must be a settings issue.

  Go to the properties of the modem and choose the Modem tab. You must disable the option wait for the dial tone before dialing.

  Then choose the utility region selection modem and remove the old profile and create a new one with the correct settings.

• Automatic dial twice then get busy signal no fax cannot be sent

  Recently, when I send a fax using the Fax Wizard then click Finish. He composed fax twice without interruption. (It only call once before). Then it shows the busy line. But in fact the line is not busy. So I can not send the fax more. I try to remove the accessory and install again. But still the same. My system is XP Home Edition.

  Please help to shoot the evil.

  Have you been facing this problem for over a year?  There is a post from user name "mokazart" as dated November 23, 2009, it is very similar to your current position.

  I don't have an answer for you, but some additional information may (or may not) suggest something.

  Open Device Manager (right click "My computer", select Properties, click on the "Hardware" tab, click "Device Manager")

  Go to the entry for "Modems" and click on the + sign to the left.  Double-click the entry for your fax modem

  Click on the tab "Modem".  Make sure the box "Wait the dial tone before dialing" is checked.

  Click on the "Advanced" tab  If there is anything in the box labeled "Extra initialization commands" copy and paste the information into your answer.

• Dial-up networking cannot connect Vista Business

  Hello

  I'm unable to connect to a switch with Vista Business SP1 network, from a laptop computer HP6910p.

  Summary of the problem:

  • I create the dial-up networking connection via "connect to".
  • I select Connect to dial up, go into the details of authentication etc and click OK
  • The DUN system displays a bar of status with «Modems connection...» »
  • The DUN system never gets beyond that point. The modem never made up, and eventually it times out.
  • If I choose the "repair" option, Vista reports that there is no problem with dial-up networking

  Attempted fixes:

  I tried just about everything short of reinstalling Vista (not an option unfortunately), so why I post here

  • Have uninstalled and reinstalled the modem several times.  The modem is listed in the Device Manager and reacts appropriately when he is questioned
  • HP have replaced the modem
  • Have uninstalled all the programs I thought could potentially cause some kind of conflict with DUN, including Nokia PC Suite (install phone as a BT modem), Cisco VPN client.
  • You disable the "wait tone before dialing."
  • Have you tried to tone and pulse dialing
  • Have you tried several lines in different locations, after checking that they have worked with another computer

  Here's the most important thing, though:

  • I extracted xp hyperterminal and running towards him to diagnose the hardware problem.
  • HyperTerminal is able to deal with success a connection!
  • When I tested it with hyperterminal works as expected - create the connection, entry number, dial. The modem comes on, I hear it dial and the call connects.
    • That's why I'm leads that the problem is with vista not the hardware.
    • Could there be a problem with how to Vista DUN trying to drive the modem?

  In my many searches on the web for a solution, I found another person who seems to have a similar problem, but unfortunately no one responded to their question.

  Help, please!

  Thank you

  G.

  I have answered my own question, after days trying to solve it on and outside.

  Somehow 'calls routed through the operator or manual numbering' had been enabled for dial-up.

  To turn it off,

  1. Open "network connections

  2. Select the dial-up connection, press the ALT key and click on the Advanced menu, and then click operator-assisted dialing. (If the assisted dialing is enabled, with assistance of the operator dialing on the Advanced menu is selected.)

  I hope this helps someone else in the future!

  G.