Dial-up does not not->; error 680
Hey everybody.
Not sure can someone help, but the laws gave me their laptop to update on my broadband connection. After I updated everything that I brought it regularize their and their dial upward would no longer work.
It keeps the error 680. Its not picking up a tone. I checked the number it should consist the correct sound. I followed the troubleshooting, nothing helps.
Thanks again for any help you can provide.
Hello
First check if the modem is properly recognized in Device Manager.
If so, the modem driver has been installed correctly and that there must be a settings issue.
Go to the properties of the modem and choose the Modem tab. You must disable the option wait for the dial tone before dialing.
Then choose the utility region selection modem and remove the old profile and create a new one with the correct settings.
Tags: Toshiba
Similar Questions
-
Outlook express does not error _ code download new emails 0x8007000E
Outlook express does not error _ code download new emails 0x8007000E
out of memory? a lot of memory!
Go to file | Identities and setup a new identity. Then when it works very well, use a file | Import | Messages to bring them from the old identity. This gives a basis for new and incompetent messages and should fix things.
Steve
-
To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.
Hello m.velentino,
Not sure if you are still having the error message isn't valid win32.applicaiton.
Get the error: not a valid 32-bit application can have several origins:
I have listed some of them below.The file is corrupted, bad or missing.
-If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
-If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.File is not designed for your version of Windows:
-If you try to run a program that is not designed for your version of Windows, you can get this error.
-Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
-If the program is an MS-DOS program more former start program or Windows, you can get this error.
-If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.File is a virus, worm or other malicious program file.
- This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
-If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
Hardware incompatibility.
-If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
-Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)Let us know if these suggestions help you.
Marilyn
-
Citing the phone dial pad does not always
Hi all
I need to call phone telephone keypad with number pre-filled, however Phone::requestDialpad does not always work. If the phone application has never been used for startup of the phone, then calling Phone::requestDialpad evokes it without switching to the keypad (if so I manually go, I can see it filled with the number, I have passed to requestDialpad). When I close the phone application and call Phone::requestDialpad from within my application again, everything starts to work - phone application appears and switches on the dial pad.
Is this a known problem or I do something wrong? I have also reviewed as part of Invocaion, but the manual is not described anything to activate keypad - only for phone calls and showing the call log. Is there a MIME type or action to show just Dial Pad with pre-populated number?
Hello
I've already logged a bug:
https://www.BlackBerry.com/jira/browse/BBTEN-1747
Related topic:
As a temporary workaround solution begins the composition directly from the app:
bb::system::phone::Phone phone; phone.initiateCall("phone number");
-
[(Windows XP) looking for a cure to issue:]
["Add Remove Programs tool does not open, cannot access area Add Remove programs on the control panel."](After typing regsvr32 mshtml.dll then press Enter :)met the following error message:"mshtml.dll was loaded, but DllRegisterServer entry point was not found.This file cannot be saved. »How can I fix above error message?-Alan.Hi Alan,
· Did you do changes on the computer before the show?
· Are you referring to an article in Microsoft?
Follow these methods.
Method 1: Follow the following steps:
(a) click on Start, run, type cmd and press enter.
(b) in the command prompt, run these commands:
regsvr32 Jscript.dll
regsvr32 Msi.dll
regsvr32 Oledb32.dll.
regsvr32 Msado15.dll.
regsvr32 Mshtmled.dll
Method 2: Scan the file system (CFS) auditor to repair corrupted files.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747
Method 3: Performs a search using the Microsoft safety scanner.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
Windows Update does not. All solutions?
Thank you, in advance.
Hello
It is a very difficult to solve. What are the items in the KB if it has shown that the installation of not?
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
Windows Server 2008 R2 Release Candidate for Windows 7 Release candidate
http://support.Microsoft.com/kb/947821Those are kind of prerequisites and probably will not solve the problem.
Products of security/antivirus/antispyware are a known cause, so you can turn them off like
as the test (and that sometimes not really totally removes their influence).How to restore the security settings the default settings?
http://support.Microsoft.com/kb/313222Error message when you use Microsoft Update or Windows Update Web sites to install updates on
Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005
http://support.Microsoft.com/kb/968003/Its usually a permissions problem:
Please check this link and those that he sites.
Work your way through my 3 posts here.
http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/200f5140-c2dd-48a5-8CDB-0d8c82ade3cfI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Windows Update does not (error 0x80000ffff)
original title: Windows Update does not work
Vista Home Premium
Service Pack 2I recently updated my hard drive. 500g to 1 T. Transfere/clone old drive to the new drive with Seagate Software.
Now, I can't run Windows update. I get a message that windows update may not run because the service is not running. You may have to restart your computer.
- I restarted my computer and I still get the same message.
- I run services.msc and it says that the service is started. (auto delayed)
- I tried to run the windows update agent and I got this error 0x80000ffff
How can I get the service that is running correctly and get windows updates. Windows crashes me because of the change of equipment? Nothing led me to reactivate. If I need to reactivate, how I do that. I see nothing in the system menu.
Thanks for any help.
Bruce
Note here: http://www.taurarian.mvps.org/WU_Vista/8000ffff.htm
-
Service Windows Installer does not (Error code: 8004FF01)
original title: Windows Installer Service does not
Error code: 8004FF01 will not download. Said the service windows install can be altered.
Try these steps and check if you are able to install Windows updates.
Method 1: reset the Windows Update components.
http://go.Microsoft.com/?linkid=9665683>
This tool automates the most common fixes problems with the Windows Update site. Note this fix it Solution has two modes by default and aggressive. You must run the fix it solution in default mode and determine if it solves your problem with Windows Update before running it in aggressive mode.
Method 2: check the condition of Windows Installer and installer of Modules of Windows.
I. click on start and type Services.msc and press ENTER.
II. Locate the Windows Installer Service.
III. double click it to check if the service is started or not.
IV. change the startup type to automatic and start the service.
V. check the same thing for Windows Installer of Module service.
VI. Press ok and close the Services window.
UTC/GMT is 16:42 Wednesday, may 2, 2012
-
CD-ROM/DVD-ROM does not error, is not read/write
CD-ROM/DVD-ROM does not work. When I insert a disc, that nothing is happening, not auto start and without errors. When I double click on the drive via my computer dvd it says no disc inserted, tried the fix, found whatever it is, said peripheral works properly, the drivers were updated.
Try to replace the optical drive itself. They do not last forever.
-
Updates Windows 7 does not error code 80244019
How to fix this update?
Windows could not search for new updates of 80244019
This tool says:
If you receive this error when checking for updates in Windows Update, Windows Update servers may experience an unusually high number of requests for updates. Close Windows Update, wait 10 to 15 minutes, and then run Windows Update again. Alternatively, you can wait for Windows Update to run at its next scheduled time.
If this does not work, try to add the Windows Update Web sites to your firewall exceptions list, and then rerun the update of Windows.
Windows Firewall ships with this version of Windows and should already include these sites in the exceptions list. If you are using another firewall, see Help for the software publisher to see how to add these websites to your firewall exceptions list:
- http://windowsupdate.Microsoft.com
- http://*.windowsupdate. Microsoft.com
- https://*.windowsupdate. Microsoft.com
- http://*. Update.Microsoft.com
- https://*. Update.Microsoft.com
- http://*.windowsupdate.com
- http://download.windowsupdate.com
- http://download.Microsoft.com
- http://*.download.windowsupdate.com
- http://wustat.Windows.com
- http://NtServicePack.Microsoft.com
- https://*. WS. Microsoft.com
- http://*. WS. Microsoft.com
-
I installed windows 7. Windows Live programs have always been a problem with my vista home premium, and expected windows 7 would solve my problems.
There is unfortunately no.
Filmmaker direct Windows won't start or restart and the code error is 0x80004005
Have only sought how to uninstall and reinstall, no success and Windows Installer says I still all Windows Live on my system when I removed the
I have a dell inspiron 530 with quad processor just over a year and the c drive of 500g, no problem of spacecan someone tell me what I can do?
Thanks hope [and a prayer!]Hello
Welcome to the Microsoft answers site(A). the utility use Windows install cleanup to remove Windows live Director and then restart the computer.
Description of the Windows Installer Cleanup utility
A link to the below information and to download:
http://support.Microsoft.com/kb/290301
When you are working on your computer and install a new program, the installation suddenly fails. Now, you're left with a partly installed program. You try to install the program again, but you're unsuccessful. Or, maybe you have problems trying to remove an old program because the installation files are damaged.Do not worry. Windows Installer Cleanup Utility may be able to help. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer Cleanup Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.
B. put the computer in a clean boot, and then install it on the computer by downloading.
To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Boot stops interference with other third-party software on the computer.
Steps to perform the clean boot:
1. click on start, type msconfig in the search box and press ENTER to start the System Configuration utility. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.Reference link.
http://support.Microsoft.com/kb/929135Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
Click Start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
On the general tab, click the Normal startup option, and then click OK.
When you are prompted to restart the computer, click on restart.
Verify this information:C. Windows Live Movie Maker is part of Windows Live Essentials and could already be installed on your computer. To see if Windows Live Movie Maker is already installed, click the Start button, type Windows Live Movie Maker and see if it appears in the list of results. If not, you can download and install for free from the Web site.
http://download.live.com/MovieMakerD. for more information about Windows Live Movie Maker and the other Windows Live Essentials programs, visit the Web site.
http://download.live.com/E. to know the basics of making a movie in Windows Live Movie Maker, see
http://Windows.Microsoft.com/en-us/Windows7/make-a-movie-in-four-simple-stepsF. for more information on full Windows live movie maker, see these links.
http://Windows.Microsoft.com/en-us/Windows7/looking-for-Windows-Movie-MakerIt may be useful
Thanks and greetings
Support Microsoft-dieng
Visit our Microsoft answers feedback Forum and let us know what you think
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ -
BlackBerry PlayBook-deploy author does not error
I am using the command to install my application on my blackberry-deploy Playbook. But, I get the following error:
result::failure 881 the application author does not match the author token of debugging
I checked to make sure that my Token Debug author matches the author in my config.xml file, but the error still occurs.
Why would I get this error?
This documentation explains that your debugging token must:
- be named debugtoken.bar
- located in a specific folder (see 'Set the debugging token section') or if you use the SDK BB10, the root of your SDK installation folder
> I guess I used the package and sign, but now it gives me an error on his signature before...
Yes you must increment the build # whenever you have sign an app. If you do not, you will get this error.
-
audio service does not error.
I have a HP Envy 700-074 and'm running Windows 8.1.
The displayed error is - Service Audio does not work. It appeared this morning - never seen before.
Thank you
Hello
You can resolve this problem by restarting the audio service.
Right-click on the Start button.
Click prompt (admin)
Net stop type AudioSrv and press ENTER to stop the service
Type net start AudioSrv and press ENTER to start the service.
This should solve the problem.
*************************************************************************************
Charles Thangaraj-Say 'Thank you' by clicking on the star of congratulations in the post helped you.
-Please indicate the position that solved your problem as "acceptable Solution". -
AdobeStock does not: error 400
Why AdobeStock does not work?
Hi Jan,
Please follow the instructions here: error 400 workaround of engineering is aware of the problem and working to fix it. We appreciate your patience and apologize for the inconvenience.
EBQ
-
ESX does not error - Host Server Agent does not start
Hello
I got an error on one of my ESX host in VC. The message "did not".
7 VM are currently connected to this host and they seem to all run normally.
I was able to connect to the host command line, but was a bit of difficulty in processing orders, they seem to cling. (ex: vmware-cmd - l does not give me an answer...)
So I tried to restart the service mgmt-vmware:
VMware ESX Server Host Agent Watchdog
VMware ESX Server host agent
This is where to stop.
I also tried just stop the service (mgmt-vmware stop) and he still gets that far.
Are their other commands that I might be able to run to retrieve this host in the VC?
I will not re-start rather host it running production servers.
Thank you
I had this problem today with one of our ESX host. If you are running:
ps - ef | grep vmware - pass
You should see something like:
root 3545 3504 1 11:40? 00:00:12 / usr/lib/vmware/hostd/vmware-hostd /etc/vmware/hostd/config.xml u
You can kill the process of:
Kill - 9 < PID > (e.g. kill 3545-9)
Then you should be able to restart the service mgmt-vmware . In fact, if you are already trying to restart the service, he will suddenly hit by action. I do not know what causes this, but it will not affect your running virtual machines.
I hope this helps.
Ray
Maybe you are looking for
-
MacBook Pro screen displays a blue screen with the vertical line
Hi, I have a problem with my macbookpro. When I try to start, the gray screen load with the apple logo and then turn to blue screen with vertical crosshairs.
-
Error install Vista Service Pack 2 and the incompatibility of Realtek
I just want to inform you that service pack 2 install gave me an error message when I installed it on a clean rebuild of my PC Toshiba laptop. Something about an incompatible driver. As I had already installed the latest drivers Toshiba pages, I chos
-
External disk HARD PH3100U-1EXB - no right to restore it to 2nd computer
I did a backup on my new drive toshiba 1 TB external hard (* PH3100U-1EXB *) using the backup/restore software that accompanies the product. The backup function worked fine. The recover window works fine too if I use it on the same computer I did the
-
whenever I start my computer a box appears in the middle of my screen with the title identify yourself and the message user name and password do not match (you provided xxxxxxxxxxxx). I would like to know how I canremove this message appear each time
-
Dear users of the forum. I know these are the URL in order to bypass the SSO admin UCCX and ease of maintenance, but y at - it for Finesse? My customer is having some problems with Finesse and we suspect it might be THAT SSO associate who has been ac