HELP - bezel drop X61t (separation of the bezel) & broken lock problem

Similar Questions

• Problem with the help of drop-down menu in the lifecycle Designer 8.0

  Good day;

  I'm having a little bit of trouble with a drop-down list. It has been designed using Adobe LifeCycle Designer 8.0

  In a form, I have a total of 73 points that can be selected in the drop-down list. Currently I have 3 dropdowns on the form. In the future, I will add a total of 73 drop-down lists.

  "When I try to select an item that is more than 4^th to the bottom of the list, I get the error message" Adobe Reader 9.1 has encountered an error and needs to close. " When I click on "error information" I get the text next message, "AppName - the Error Signature. AppVer: 9.1.0.163, ModName: ModVer, AcroForm.api. 9.1.2.82, 0000948 offset a

  Thank you all

  Chomp

  Hi Chomp,

  When in design mode:

  If you highlight the Hiarchy palette dropdown, it remains highlighted? or the flip pointing to someother object?

  If you click on it directly in the workspace. It shows "drop" in the palette object for the "Type"?  or something unexpected?

  If she will not be highlighted or say something unexpected, it is your question - I suspect by copying and pasting the drop something has gone wrong.

  If so, you must get rid of these bad objects. My experience is that if you have bad objects you can have difficulty to remove directly and may need to remove the parent (the tablerow or subform that they have).

  I'm very curious to know if this is your problem. Please post an update when you get a chance.

  Good luck

  Stephen

  P. S.

  Go slowly when you copy and paste - make sure you that Designer is finished with this operation before starting the next batter - it takes more time than you may realize. Additionally, make sure that the object palette indicates that you are where you think you are, before pasting. After you are done paste an object, Designer has an odd routine indication of the Master Page as object type when its done. If so, set the focus again for which you want to paste, before sticking another menu drop down always in your Clipboard. If your drop down boxes in rows in the table, think about copy and insert any lines containg your DDL

  Finally, 73 DDLS 73 points? Wow! IMHO, 73 points is too much for a user. Consider using the preOpen and script, the filling of the DDL event. If you do this then you can fill in the with a shorter list once the user has made some choices. Just a thought.

• The administrators password was interrupted due to a separation of the employee, now I have as an administrator. can't make the necessary changes Please HELP

  The administrators password was interrupted due to a separation of the employee, now I like admnin. can't make the necessary changes Please HELP

  Keep passwords secure - Microsoft on passwords strategy
  http://support.Microsoft.com/kb/189126

  What to do if you forget your Windows password:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

• Y at - it an email address to contact for help me to cancel my subscription? I tried to use the option chat 4 times and my internet keeps dropping out and canceling the cat until I can get the cancelled subscription

  Y at - it an email address to contact for help me to cancel my subscription? I tried to use the option chat 4 times and my internet keeps dropping out and canceling the cat until I can get the cancelled subscription

  You may please check out the link below for instructions on cancellation.

  Cancel your membership creative cloud

  For more information you can contact the Support from Adobe by clicking on the link below.

  Contact the customer service

  Please make sure that you are connected to the right Adobe ID.

  Hope this will help you.

  Kind regards

  Hervé Khare

• My panels are not displayed when I click on it in the menu drop-down windows. The box appears but not the Panel. Can anyone help?

  My panels are not displayed when I click on it in the menu drop-down windows. The box appears but not the Panel. Can anyone help?

  Try to reset your preferences using Cmd (LTRC) - Opt (Alt) - move when restart you the version of AI. Did you once two monitors?

• Help! Safari cannot connect to the server

  I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.

  I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• IMessage Apple Watch has two interviews separated with the same person?

  My new Apple Watch has a problem with iMessage and I know how to fix this on my iPhone but not watch?

  On my iPhone, that my ID apple is connected to more than 10 devices and sometimes when a new device is added, it adds the addresses on my apple for iMessage and FaceTime ID and I always fix by unchecking the addresses that I don't want in the application settings under "Messages" and "FaceTime." However, this isn't the same thing to watch because there is no option in the settings on the Apple Watch and the watch App on my iPhone.

  I would like to help please?

  Hello

  Apple Watch uses the same parameters (for how you can be reached and how new conversations are started) for Messages as your iPhone.

  If you have two interviews separated with the same person, the following steps may help:

  • On your iPhone, check if there is more than one contact form in Contacts of this person (if so, remove duplicates).
  • Delete old Messages conversations with this contact on each of your iPhone and watch:
    • iPhone: app Messages > swipe to the left on a message thread > delete.
    • View: Open the Messages app (from the home screen, which is accessible by pressing the digital Crown) > swipe to the left on a message thread > tap on Trash / delete.
  • On your iPhone in the app Watch: Watch My > general > reset > press reset sync data:
    • You won't see anything happen after pressing it (the process runs in the background, invisible to the user).
    • Leave a minute or two to allow the course ends.
  • Restart your iPhone and your watch (turn the two together off the coast, then restart your iPhone first):
    • Restart your iPhone, iPad or iPod touch - Apple Support

    • Restart your Apple Watch - Apple Support

• an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  Hi mdsavol,

  Your observations are accurate. The 'suggestions' are previous entries in the same column that correspond to what has been entered so far in the active cell. The only direct user control is to activate the function turn on or off in numbers preferences > general.

  There are other ways to include or exclude items of suggestions:

  • To remove typos in the suggestions list, the user must correct the typos in the cell above the active cell. If they are more in the list, they won't be presented as suggestions.
  • To include selections added to the list, the user must enter these suggestions in the individual cells above the active cell and column where they are wanted as suggestions.

  There was a request here a while there is a list of suggestion 'live' similar to those of some websites, which offers a descending list of possible entries as a type in an input box.

  The only way I see to reach a solution similar to what you have asked is to use as many lines at the top of the non-en-tete of the table section to list the items likely to repeat in your table, and then hide the lines. You'll need a list for each column where you want to use this feature with a list previously planted. Existing items will then require a likely hit up to three, then a click to choose from a list small enough to enter a value into a cell. News he will need to enter in full the first time, but after that it will be put on the list and answer the same thing as the terms preseeded.

  While your setting upward (or decide not to do), consider going on the menu of number (in numbers), choosing to provide feedback from numbers and writing a feature in Apple request. Describe what you want. Explain how he could help the average user numbers, and then hope for the best.

  Kind regards

  Barry

• Search menu drop down always on the top of the & blocks tapping annoyance of keyboard screen

  Hello

  I use the windows on-screen keyboard 95% of the time. And I would usually place in the middle of the window when in use. When I need to type in the search box, and even if the screen keyboard it is set to always on top, it always goes IN the drop-down search suggestions, which blocks my ability to keep typing. I have to stop typing and move the OSK to the right or the left beyond the border right or left of the search box or move it to everything at the top of the window or down out of the way the drop-down list. Then, this highlights the text that I already typed, forcing me to click at the end of it, or start over (once I moved the OSK out of his way). Even though I have disabled search suggestions still has a drop down menu which blocks the OSK (position/size/length of the search along the top box and the position of the OSK are where I love them bc of my poor eyesight). The address bar does the same. I want to know if there is a way to keep the search drop-down box UNDER the OSK while I type? It's a long question, I apologize, but it's a little wordy to describe. See the photo and I'm sure that you will understand what I mean. The OSK is always set to "Always on top" in Win 7 Premium

  Thank you for your helpful answer
  brand

  It looks like a work in progress for programmers. I wonder if this thread could be redirected to them? I'm ready for this mark as resolved for me personally, that the behavior of the drop-down menu 'old' shorter is easy {er} to avoid now and also provides suggestions less and less that I type in the query (which therefore relieves my annoyance).

  The OSK should, logically, remain on top, right? Ah even though it IS hard to read them with a keyboard in the way... this is defined as a conundrum for those that would, like me, to read both the helpful suggestions and the keyboard letters at the same time.
  

• Need help to remove unsightly bar from the top of my Firefox. May need to change the userchrome

  So my Firefox used to look like this http://i.imgur.com/u7wWT.jpg (ignore the WaterFox bit, it's an old picture I switched to Firefox since then and had the same layout)

  It's about as effectively as possible in order to maximize the screen space, which, on my 1280 x 1024 screen, is very valuable. Then they took the addonbar. I found an add-on to bring it back, who worked little...

  http://i.imgur.com/BQw2n3X.jpg

  Except for two things. First, the pale blue bar at the top. A remnant from which the URL bar has been so stupidly front. Can't get rid of it in the Customize menu.
  Secondly, I can't get the back + next button on my addonbar more. I have a menu drop down it with the buttons on the inside, but it's a little less convenient. There is no other forward/backward buttons in the Customize menu.

  Any help would be greatly appreciated. Thank you for your time

  Have you checked the Options/preferences of the extension of the RTC, which has a parameter for mobile buttons previous and next among its settings?

• using Firefox 11.0 when trying to 'bookmark this page' in the bookmarks drop-down menu at the top of the browser bookmark pop-up window, but it disappears when I move my mouse to the bookmark window

  using Firefox 11.0 on Windows 7 prof 64 bit, when trying to 'bookmark this page' in the bookmarks drop-down menu at the top of the browser bookmark pop-up window. When I move my mouse over the bookmark pop-up window to change the directory where you will store the bookmark, it disappears before I can do something? If I move my mouse near the yellow star on the right side of the window to the url, the menu bookmark can appear again, but it disappears when I move my mouse over it?

  Hello!

  We have seen similar problems in the past. Read this 2-wire and let me know if they help you:

  https://support.Mozilla.org/en-us/questions/899098
  https://support.Mozilla.org/en-us/questions/850203

  Good luck
  Ibai

• Window drop down bookmarks on the menu bar is missing

  My Favorites are not missing, because I can access it through the sidebar.

  However, I prefer the drop-down list in the Menu bar for my favorites. It is easier for me.

  The Favorites drop-down list box has disappeared and I can't determine how to restore it in the menu bar. The menu bar is always on display and not hidden... just not favourites.

  Any help is appreciated.
  Carl

  You have the delicious extension installed?

  If so, look at the Options of this extension that hides the Menu bar for bookmarks item.

• Dropped my phone in the paint

  I dropped my phone in the paint, and now I can't hear anything when I get a call. can do something or I have to change my phone?

  There is no magic that will help your phone if you let him down in the paint.

  Use common sense here, go to the Apple store and buy an out of warranty iphone.

• Open spreadsheets Excel separated on the taskbar.

  Original title: taskbar

  Is it possible that, if I open two excel books can they remain separated on the taskbar or will they always combine under the block

  Hi AngelinaReyes,

  You can select the option never combine in the taskbar properties and see if it helps.

  For more information, you can consult the following article:

  Change appear on the taskbar buttons

  Hope this information is useful.

• Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone?

  Webcam with integrated microphone.

  Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone? more details on settings please

  to check your setting first:

  Right click the speaker icon in the notification area and choose: Adjust Audio properties.

  Or: Control Panel, sounds and Audio devices.

  Volume tab: click Advanced under Speaker settings and open the drop-down list for the speaker setup and choose your speakers, click on apply.

  Click the performance tab and move the sliders to the complete and best, click OK.

  According to the Volume of the device, click Advanced.

  On the page of the Volume control, click Options in the menu, click Properties.

  Mixing should be your system and not one of your pickups.

  With reading selected all the check boxes.

  Click record, peripheral mixing system, check all the boxes.

  Click play again, and then click OK.

  Volume control, "as you like it".

  Vague, put the max slider.

  All others are ok in the middle.

  Close the Volume control.

  Now we will install your micro Genius:

  Click on the Audio tab:

  Audio playback: System.

  Sound recording: click the menu drop down and choose your Genius mic, click on apply.

  Click the voice tab:

  Reading of the voice commands: System.

  Voice recording: click the menu drop down and choose your Genius mic, click on apply, click OK

  When you want to use your Web Cam microphone, you will need to go back and select again instead of your micro Genius.