receive a fax - HP M127fn

Similar Questions

• OfficeJet 4500 how to respond or receive a fax manually?

  HP Officejet 4500, not want it normally auto-answer value is.

  Is there a button or an easy way to tell him to answer the phone because it sounds, saying to answer the phone and receive a fax expected?

  Through the menus to turn on automatically as long as the phone rings, and then remembering and going through menus again to turn off the automatic reply are a pain.

  Connected computer is Windows 7 Home Premium 64 - bit, but this should apply even if the computer is off.

  Thank you

  Rich

  In response to a fax manually, simply hit the big green button on the front of the printer start when an incoming fax comes in.

  If you receive faxes often enough but won't auto answer pick up your calls, so you can call your phone company and ask to get a 2nd number on the same line with a distinctive ring pattern.

  In this way with auto answer on you can set your printer only pick up faxes with this particular type of ringtone and use this 2nd number as your fax number.

• OfficeJet Pro 8610 - answering a call by phone, and then receive a fax remotely

  Hello everyone

  We just purchased and installed a Pro Officejet 8610 as a fax on our home/office phone line.

  The phone line also receives regular calls and a phone is connected to the line BUT 2 FLOORS above.

  Is it possible to receive a fax after having responded to the call from the phone?

  If the phone was near the Officejet we can start the fax by using the touch screen, but this is not the case.

  We had a standard fax machine (Sharp UX-238) that can be started remotely directly from the phone that answers the call simply typing "5."

  (see also http://files.sharpusa.com/Downloads/ForBusiness/DocumentSystems/MFPsPrinters/Manuals/MX6240N_7040N/c...

  One wonders if similar behavior or is available on the Officejet Pro 8610.

  Hello

  If yo, pick up the phone and hear a fax sounds, "123" from your phone dial, and which should cause the fax answer the call.

  If you do not see this response, make sure that the Mode of Error Correction is enabled in the printer setup and check again:

  1. On the printer Panel, drag the screen to scroll to Setup and then press the Setup icon ( ).

• I can't receive a fax in windows XP Home Edition. He will not answer the fax call. What's wrong?

  I have a comcast moderm and a computer network using netgear. My printer / fax is a HP Oficejet 4500 Wireless.

  I have a comcast moderm and a computer network using netgear. My printer / fax is a HP Oficejet 4500 Wireless.

  Why don't you talk and you have a Comcast modem?  You can't receive faxes unless your machine is connected to a regular telephone line.  It was always connected?  It is always connected?

  Normally, the 4500 JO receives the fax.  If you want to receive the fax directly to the computer, you must configure the fax HP special PC software accessed via the "HP Solution Center" application which should be installed when you installed your printer.  Did you do then?

  Assuming that your OfficeJet 4500 is connected to a phone line, if it meets a fax call is a function of the JO 4500 and not Windows.  You may have disabled the function address.  It is also accessible via the HP Solution Center, you can also set up automatically to the control panel of the printer.  See your user's guide.

• Can receive a FAX on my computer?

  I have an OfficeJet Pro L7555, using Windows XP.

  Rather than receive a 'paper' fax, I prefer to receive the fax directly on my computer.  Is there something that needs to be set so that it works?  I currently have the "HP Solution Center" installed.

  Any help is greatly appreciated,

  Sincerely,

  Dan

  According to the Manual of the product, the L7555 does not support fax to network folder function.  Most of the more recent pattern of printers OfficeJet do.

• I CAN SEND/RECEIVE A FAX USING MY CANON PRINTER/FAX/COPIER USB AND MY MODEM INTERNAL VOICE/FAX WITH MY VERIZON USB MODEM FROM THE INTERNET?

  I AM RUNNING VISTA HOME PREM MY DEVICE MANAGER INDICATES THAT I HAVE AN INTERNAL FAX/VOICE MODEM. I'M SO CONFUSED.

  Original title: I DO NOT HAVE A POSER LINE, I CAN SEND and RECEIVE a FAX by USING MY USB CANON PRINTER/FAX/COPIER AND MY INTERNAL VOICE/FAX MODEM WITH MY VERIZON USB MODEM ACCESS to the INTERNET?

  The game, July 1, 2010 21:03:19 + 0000, CAPTBARRY wrote:

  I AM RUNNING VISTA HOME PREM MY DEVICE MANAGER INDICATES THAT I HAVE AN INTERNAL FAX/VOICE MODEM. I'M SO CONFUSED.

  Ouch! Please do not yell at us. We can hear you if you type normally,
  in different cases.

  You have an internal fax/voice modem, but if it is not connected to
  a land line, cannot you send/receive faxes like this.

  Your only choice is to not make use of your machine gun, but to use a web site
  service to send faxes for you.

  Ken Blake

• HP MFP M225: cannot print from my computer while receiving a fax

  We cannot print from our jobs while receiving a fax.  Just had a big fax that took 20 minutes to come through, our work was at a standstill because of this.  Have had other multifunction machines that we could print or copy when you receive faxes.  Is there a setting somewhere that I'm missing?

  Hi @spd9602,

  Thank you for visiting the Forums from the HP Support! I understand you want to be able to use your HP LaserJet Pro colour M225 while she receives a fax.

  There is no setting or feature that you are missing. When a Fax is coming through, you cannot use the other features of the LaserJet printer.

  Even if you print a document, you would be unable to receive a fax or make a copy.

  One alternative may be scanning and sending larger documents then the LJ is not supported by a function for so long.

  I hope this helps!

• Receive a fax manually on the Officejet Pro 276dw with a telephone

  Is it possible to receive a fax manually, on the 276dw Officejet Pro by answering the phone line, the fax using a telephone in another area of the House and enter a code? (My Fax is not on a dedicated line and auto answer is disabled.) I see an answer in the forum that says you can do it on the Officejet Pro 8600 by answering the call on a telephone, press the 1 2 3 digits on the telephone keypad and once the fax tone is heard, the phone can be hung. It would work the same way for this model? If so, is the code same (1 2 3)?

  See page 71 of the JO 276 Manual:

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c03753518-3.PDF

  No, there is no option to enter a key code on this model printer to manually collect and receive a fax message.  Users must walk on to the control panel and press the Start button, whenver black or start color, automatic answer is off.

• When I receive a fax, it does not print, nor is it stored on my computer.

  HP has tested the printer when we installed. It is defined as the wireless. Fax test page printed. I had 9 pages received by fax Thursday, and they were never printed. Are not in my downloads. I couldn't set up the fax to save on my computer when the installation was made because I do not have a password on it. How can I get these faxes to print?

  Hello KatieRocks,

  Welcome to the HP Forums!

  I understand when you receive a fax, it does not print. What kind of printer you have? Click here to read: model number.

  How is the printer connected? USB or wireless?

  What is your operating system on your computer? Click here to read: Windows.

  Please verify this information and I will help you.

• the computer must be on and the windows scan and fax program open to receive a fax?

  I would like to receive faxes at any time - the computer must I be on and windows & scan fax needs to be run to receive a fax?

  I looked through many pages of documentation and the forums and didn't find any reference to this.

  Thanks, Gil

  He probably could if your fax/modem may wake the computer from sleep mode. But you would still have to wonder if the fax send would wait long enough for the PC to detect the ring, wake up and be ready to deal with a fax.

• Cannot receive a fax on HP FaxAll in one

  Why I can't receive a fax?

  Why I can't receive a fax?

  Hi, Carl.

  It is helpful if you list the make and model of the all-in-one device

  It is a HP document that may be useful in troubleshooting

  Unable to send faxes

  Unable to receive fax on HP Officejet 6500 after connecting to Windows 7

• HP Officejet G85 device can send a fax, but cannot receive a fax

  I have Windows 7 and everything works on my HP G85 except it will not receive a fax.  Will send OK but not receive.  Someone at - it an answer to this riddle?

  I'D APPRECIATE ANY HELP. Thank you

  Gloria anne

  It is not a Windows problem, nor Microsoft, then contact HP for assistance with their product.  Go to the HP website, select Support and drivers, enter the model number of your printer or leave the autodetect website, follow troubleshooting guides here.

• integration with Echosign eFax to send and receive a fax

  How to use eFax in Echosign to send and receive a fax?  I created the link between the accounts, but I don't see what to do and how to take advantage.  Does anyone have experience with this or guidance?

  Hello

  You can also follow the instructions: https://secure.echosign.com/doc/EchoSigneFaxSetupGuide.pdf

  Thank you

• LaserJet PRO M127fw: Laserjet M127fw-DON'T receive a fax

  Hello

  I can send a fax but I can't receive.

  I tried via the internet and the problem is "your fax has failed, because the recipient line rang, but he had no answer.

  That is to say that he sent me a fax but my Fax does not display a call to incomeng.

  I tried a reset and it did not help

  What should do?

  I understand that you can send faxes @yar94, but you can't receive them. Please use the following link to HP to perform all the necessary troubleshooting: Fax HP can send faxes, but cannot receive them.

  Please let me know if that solves the problem by marking this post as an acceptable Solution. If you need more assistance let me know and I will gladly do whatever I can to help. Thank you.

• Cannot receive faxes "an error has occurred when receiving the fax"

  Origginal title: fax problem Windows xp

  We had no problems on a windows xp computer that allows us to receive faxes until moving this week.  I reloaded all updates and rebooted several times and the phone company sees no problem of line, but we continue to see the "an error occurred when the fax is received" suggestions

  Hello

  1. What is the brand and model of the computer?

  2. what security software is installed?

  3. Update Service Pack 3 installed?

  4. don't you make changes to the computer before this problem?

  You can read these articles and check if that helps.

  HOW to: Solve common fax problems in Microsoft Windows XP: http://support.microsoft.com/kb/321639

  How to enable and configure the fax service in Windows XP: http://support.microsoft.com/kb/306550/EN-US

  Use your computer for printing, scanning and fax: http://windows.microsoft.com/en-us/windows-xp/help/setup/print-scan-fax

  Let us know if you need assistance with any windows problem. We will be happy to help you.