Help! Blackbird 002 - 01b makes horrible noise when starting

I have a Blackbird 002-01 b with a card mother eVGA 780i NV. When I flip the switch on "on" at the back of the power supply, LED MB internal lights up, but nothing on the front. It will not be powered by the power button, but I have to use the power button on the motherboard. As it starts, there is a strong ongoing high tone that does not stop.

Any ideas?

Thank you!

id355

Hi id355, glad to hear you are making progress. You can check the cables on the HDD and the DVD player. Make sure that the hard drive is connected to the first port on the motherboard sata and DVD player is connected to the second track, if these are the only drives in your system.

You must then enter the BIOS and make sure the first boot device is the DVD player and the second boot device is the SATA hard drive...

If the operating system is installed on the SATA hard drive and it is intact and non-corrupt, and there is no CD or DVD disc in the optical drive, the system should start on the hard disk and the desktop computer.

I hope this helps.

Tags: HP Desktops

Similar Questions

  • My pc is slow and it makes the noise when it works

    Hello

    My pc is slow, when I'm typing and all open programs. It takes time for any program to open and it makes the noise when it works.

    My pc is a Windows Starter 7 mini laptop.

    Hello

    Problems of material software medium noise is not physical and makes no noise.

    Check with support from the manufacturer of your system, their online documentation and drivers, diagnostics,
    and ask questions in the forums (if any) on known problems.

    There may be some performance issues that could be helped with the software however the material
    problems need to be addressed first.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • My HP 4500 G510N-Z printer makes grinding noises when it prints. The impression is correct.

    My HP 4500 G510N-Z makes very loud clicking and grinding noises when it prints.  Printing turns out very well but the noise is very loud.  Does this mean that the printing function will stop working soon.  Can it be fixed?

    Often, sienna42, grinding loud noises are indications of a hardware problem that develops. Please see the document located here for the procedure help solve noise problems.

    I hope this helps.

  • printer makes a noise when you go to print as it jumps CMV

    Hi I have a Photosmart B109n. When I go to print a document from the print head moves and just before the paper is loaded in it starts to make a noise as it jumps the right wheels. It can't all the time but most of the time now.

    Help, please

    Hello scales,.

    How old is your printer? Looks like you're right in the fact that the internals of the printer are not lining up properly or the gear wheels is damaged.

    Addresses of this article, the printer of the noises when printing, so it can help with your problem, but the end result has the printer repaired.

    The product makes noise when printing

  • Fan MacBook Pro makes horrible grinding when picked up

    I'm worried that my fan is really messed up. Sometimes when I take my laptop it sounds like the fan is hitting something inside my laptop. I also noticed that my laptop heats up as it usually does. Should I bring to the Apple Store? They will fix it for free?

    For problems with the fan, reset the SMC > reset of the management system (SCM) on your Mac controller

  • Is it possible to have my iPhone 6 and Apple Watch both make a noise when it receives notifications?

    I have look under each setting and can't find anything. I work in an environment where the sound of watches is not quite enough to be heard, but my phone can be. Yes, I have a set of haptic at max too, but I want my phone to ring for notifications as well.

    Hello

    You can see that if you turn off your wrist detection (on your iPhone, in the application of the watch, go to: Watch My > General > wrist detection) it will make all notification alerts to be delivered to both devices. However, you will not then be able to benefit from features including Apple pay and one unblock after placing the watch on your wrist.

    If you want Apple to consider adding an option for notifications to be delivered for both devices regardless of the other settings (this option currently does not exist), you can suggest to Apple here:

    https://www.Apple.com/feedback/watch.html

  • hpc6180 all-in-one makes this noise when answering machine picks up even if auto answer is disabled

    help cannot use my answering machine on my phone at home because my hp c6180 all-in-one is that the sound is terrible, even if auto answer is disabled

     
    [Moved from comments]

    It could be the build-in the fan. If I'm wrong, please contact HP!

  • My iphone screen has gone completely blank. I can still talk to Siri via activation of the voice and the phone still makes a noise when I plug it into the charger, but the screen does not respond.

    white screen

    Try a forced reboot. Hold the home button and power at the same time until you see the Apple logo. About 20 seconds or more.

  • My iPhone 6s and makes a noise when I plug headphones and it is quite and it gets really annoying. My live wallpaper does not work. Apple can't replace my phone?

    Apple replace my phone if I have several defective Apple hardware stuff?

    No one can tell you since we are not Apple employees.

    Take a genius bar appointment for an evaluation.

  • Help! My computer makes a noise loud!

    My computer is a thud.  It accelerates and sounds as if she's going to fly.  It stops after a while, then starts again.  I don't know much about computers and have no idea where to look to fix this problem.  My computer is a Compaq lapstop.  I have windows 7.

    The most likely cause is the heatsink that is partially blocked. You can try

    1. compressed air from the vent on the side
    2. remove the covers on the underside in the area directly where the fan is
    3. take it to a reputable technician or if authorized service center 1 and 2 will get you nowhere...
  • Satellite Pro U400-11V - Sharp noise when starting with connected screen

    Hello

    We received 5 x computers laptops Satellite Pro U400-11V, are excellent, with one exception:

    When you start (it happens on all of them) with a screen VGA monitor plugged in, a high beep is played from what looks like the speaker system. It occurs just before the first splash screen windows.

    Once the windows login screen is displayed a monitor can be connected to any problem & works very well.

    What can I check? I have had a look but do not find all the tracks so far, where this post.

    Thank you
    -A

    Perhaps you are meaning that the beep POST (Power on self test)?

    The laptop still sounds if the POST has been successfully passed.

    Parts of the motherboard will be verified during POST, and if everything is ok, a beep is displayed.

    If something would be a mistake, the laptop will not start and different beeps would appear.

    Welcome them

  • Computer keeps freezing and makes strange noises?

    For some time my computer keeps freezing and makes weird noises when this happens. I have a laptop Gateway, Windows Vista, Firefox and internet exp.9, AVG for internet seuirty, and I tried system restore to a couple of times to solve this problem. When the computer crashes I have no choice but to restart and then it always ask if I want to start again, but in safe mode. I don't seem to have any problems in safe mode. In addition, the windows updates did not work, they always came as "update failed" it happened all of a sudden. Please, what could be the cause this problem and what are some solutions?

    Hello

    Follow these methods and check if that helps:

    Method 1:

    I suggest you to set up your computer in a clean boot state, and check to see if the same problem happens.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Method 2:

    Also, follow the steps in the KB articles provided below to improve performance on Windows vista.

    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062

     

    Method 3: Provide the information to the event log

    If the problem persists beyond these steps, then provide the information to the event log to help you.

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  • Sound of siren when starting computer (Windows 7) E-Machine

    I was wondering what could be the cause this Mermaid - like the high-pitched noise when starting my computer.  It doesn't go away, but I wonder why this is happening.  I was reading about the fans, etc., and the CPU usage but I'm not sure how to check for these things.

    I would be grateful if someone could answer this question.  Thank you.

    Angela

    Perhaps in connection with a system fan doesn't start is not at the start, no such error / sound is triggered in the bios of the system, before the start of victory

    This problem occurred after that you run a windows update, or installed / ran a maintenance utility?

    Is this a desktop or laptop computer and model number?

  • Satellite A100-998: speakers make noise when it is on current alternative

    Hello, I have a
    Satellite A100-998
    Part number: PSAA9E-0PP044EN

    My speakers make a horrible noise slope high when the laptop is plugged into AC power, but not on battery power. It happens through my integrated sound card, my soundblaster card external as well as the headphones on both ports, and they have all the latest drivers anyway, so the problem is elsewhere. Noise appears on the windows out vague, i.e. all inhibition does not, nothing 'generates' sound as a program that runs in the background.

    Can anyone help? Here is a link to the noise, I recorded with helmet attached to the microphone port, it's quite quiet, you may increase your speakers to hear it. Link: [http://rapidshare.com/files/114859161/noise.mp3.html]

    I guess it's a kind of interference, but I'm a software guy, I don't know about these sorts of things.

    Thank you
    Andy

    I doubt that the software could cause this kind of thing, looks like it could be a problem of ground or a component of the motherboard.

    I take it to a service center and get them at a glance.

  • having an iphone 6.  The ringtone does not make a noise.   I tested the ringtone and it sounds however when I receive a call or text or email, the Bell is silent

    I have an iphone 6.  The ringtone does not make a noise.   I tested the ringtone and it sounds however when I receive a call or text or email, the Bell is silent

    Hello Jimmy10 66,

    Thank you for reaching out to the Community Support from Apple. I know how it is important to follow your alerts, and I want to help you get your work again.

    Before we get too far, it's always a good idea to check that your 'secret' button just above your volume controls is not engaged. If you see that the yellow indicator go ahead and switch to the other position to turn it off.

    Alternatively, you can drag up from the bottom of the screen and make sure that the control of "do not disturb" is disabled.

    If those who are for the time off, go ahead and restart your phone and retest alerts. If the behaviour continues or if you encounter any problems, please reach out again and let the community know what other steps you have tried. The entire community is here to help.

    Best regards

Maybe you are looking for

  • Whence a picture to desktop screen?

    I have a Chinese item on eBay that gets a lot of interest from Chinese-name users. However, after answering an e-mail in my e-mail client who hails from eBay, I was surprised to see that my image of the desktop has changed of the mountain landscape o

  • flashing behind some of the photo

    I made a movie in windows movie maker with 100 photos again and add different effects and transitions, but there are flashes behind some of the photo playback.  I kept the project and a redone, but the same thing is happening, but I did successfully

  • Double update Z3

    Hello I continue to receive notification of update on my Xperia double Z3 version 23.0.F.1.74, when I connect to the computer, it shows the same version number exactly and when I click update it takes forever to contact the server and then I turn it

  • How to uninstall windows powershell in vista

    I'm trying to fix my computer and the cd said I need to uninstall windows powershell.  I don't know what it is.  Can you help me to unintall Vista Home premium?

  • Error stack N2048P

    I have 2 stacked N2048P switches. Shortly after the deployment, I started to have constantly the errors below: DRIVER 172.x.1.x - 2 [108576100]: broad_hpc_drv.c (4362) 8073 %% unit: 0CDC RX FIFO error table entry 0 39 ECC DRIVER 172.x.1.x - 2 [108576