Help - Blue Screen Message, even after a system reinstallation

Similar Questions

• Qosmio F20 blue screen of death after stop

  Hello

  I get the blue screen of death after a stop on my laptop Qosmio F20.

  The error is IRQ_NOT_LESS_OR_EQUAL.

  I guess that's somehow connected to the tv tuner card.

  I tried to restore the system - not good. After the restoration for some time, it was OK. But then again appeared BSOD.

  Sometimes, it also appears when I connect USB hard drives or even when I insert the DVD disc.
  And for shure every time I stop to laptop.

  Anyone have any ideas?

  Hello

  This is my personal opinion;
  I think it's a memory problem!

  Why, because it of very difficult to reproduce this error message and it looks like this BSOD happens without the use of hardware or special software

  I have gogoled for this error message and I had a lot of success!
  I read in various forums on this issue, and especially a fault memory has been one reason why the BSOD appeared.

  But someone suggested to disabled the pagefile... Probably, you should check out these tips:
  http://joelmama.com/2006/10/16/Windows-XP-BSOD-error-IRQ_NOT_LESS_OR_EQUAL/

  Good luck

• My computer date deadline and I get a blue screen message

  My computer is less than 60 days old, and now for a week, he stops (crashes) at least once a day. When I reboot, I get a blue screen message. I have vista with all kinds of measures to protect against viruses and worms. Automatically, it downloads and installs the updates daily and other than that I have not downloaded or installed anything from the internet.
  Microsoft Geeeeeee, I am not a Curmudgeon and don't know how to fix my machine. I just need (and wait) a reliable system that works! What is the problem and how to fix it? Thank you.

  Thank you very much for your answer, but I have read far more after my post and understood how to correct the problem. Microsoft has created two UPDATES of BAD August 27. in safe mode and I went to my control panel, see updates, uninstalled the 2 bad edits. I don't remember the exact numbers, but one was 36xx and the other was 29erxx.  Now, my computer is fine. If anyone who reads this message is having the same problem, go to the blue screen and updates of messages to read on how to solve the problem.

  How is BTW, that microsoft has put 2 updates of bad anyway? You should be ashamed for causing problems for your customers!

• Blue screen stop: c00002 / a (fatal system error)

  Blue screen stop: c00002 / a (fatal system error)

  the windows login process ended unexpectedly with status 0xc0000005 (0x00000000 0x00000000) the system has been shut down.

  I have dell windows XP home service Pack 3 computer.

  I had a problem with security thinkpoint and called microsoft and after they had me take measures running a couple different scanshttp://live.sunbeltsoftware.com/download VIPRERescue andwww.eset.com virus more microsoft had click me start, run and type in the press temp ok delete all files, run and type prefetch and delete all the files, run %Temp% remove all the files then empty the trash restart and everything should be ok.

  the computer starts fine until I stopped and tried it begins again, same blue screen problem, I went to safe mode and don't start running and temp, prefetch and %Temp% remove empty the Recycle Bin and restart and computer ran fine, after the 2nd screen blue again.

  I'm now working on the computer and if I press start, run make temp, prefetch and % temp % and delete and empty the trash before turn me computer turned off it will start very well, if I don't do the temp, prefetch and %Temp% steps that I will get the blue screen at the start.

  How can I solve this problem and get rid of the blue screen for good message?

  Hi C_O_A_C_H_11,

  Perform the last known good and then restart your computer and check if you receive the error message. You can check the link below:

  How to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I did a factory restore and still get the blue screen message.

  Separated from this thread.

  I did a factory restore and still get the blue screen message. Windows says it is searching for a solution, but is never a solution. What can I do?

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA8004A7E1D8
  BCP3: 00000000B 6000000
  BCP4: 0000000000010015
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\050515-27159-01.dmp
  C:\Users\papreps\AppData\Local\Temp\WER-120136-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Hi papreps,

  Thanks for posting your query on the Microsoft Community.

  As the posts above mention, the problem comes from your drivers.  Crashes BSOD (Blue Screen of Death) are usually caused by bad drivers (manufacturer code) and incorrectly blamed on the operating system. Make sure you have the latest chipset drivers installed with the latest version of the BIOS.

  I suggest you to download and install the latest drivers from the manufacturer's Web site.

  Try the procedure described in the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  , Note 1: Running chkdsk on the drive if bad sectors are found on the hard drive, while the bad sectors can be refunded but there may be loss of data.

  Note 2: Data or files that are infected by malware could be beyond cleaning and must be completely deleted to preserve the integrity of your system, which means that there could be a risk of data loss.

  Keep us posted on the State of the question, we will be happy to help you.

• Safari gave me a blue screen of death, calling the Microsoft blue screen of death after installing Adobe flash player. The van is responsible for me to a Microsoft third-party technical support I did not trust anyone at - he had a problem with Adobe flash

  Safari gave a blue screen of death after downloading Adobe flash player do not have access to in-house. Big sign telling me that my computer from Microsoft was blocked and to call this number that was, according to the individual, I spoke, a third party provider working for. Microsof. Everyone knows this. I do not trust them especially when they declared they wanted to log into my calculation. Is there one resolution other than OS X Recovery?

  There are hundreds of these sites to scam out there. Nothing has been installed on your Mac, or even downloaded to. The goal of each of them should Miller get so much money that you're ready to spit. Good thing you cut them and not give them access to your Mac.

  The usual simple solution is Force Quit Safari. Hold down the SHIFT key, and then restart it. The SHIFT key tells Safari don't not to load the previous sites.

• Blue Screen of Death After adjusting TCP/IPv4-adapter error "STOP: 0x0000007E"

  Original title: Blue Screen of Death After adjusting TCP/IPv4-adapter

  Hi all

  I bought a new USB wireless internet and after installing it, it automatically connects to our network, but fails to connect to the internet. (Local access only)
  A roommate told me that it was something to do with my IPv4 settings. However, after trying to change these settings several times, it always freezes when I push the "close" - button. It is followed by a Blue Screen of Death with the following codes:
  STOP: 0X0000007E (0XC0000005, 0X92C1B7D1, 0X8C1CBC0C, 0X8C1CB908)
  AFD.sys - address 92C1B7D1 base at 92C0F000, DateStamp 4db03801
  I couldn't find anyone with the same problems. Can you help me?
  Thanks in advance,
  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  We prefer at least 2 DMP files to track trends and to confirm the cause.

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

• I get the blue screen with the exception of system Service in Windows 8. It seems that many people have of it.

  I get the blue screen with the exception of system Service in Windows 8.  It seems that many people have of it.  I can't use my computer without losing all the data every few minutes.  It is brand new.  Fix?  It often happens with Firefox, but other times too and restarts sometimes when you type an e-mail in the e-mail of Windows 8 program.

  For this recent System_Service_Exception error, if you have an AMD graphics card try the next tool from AMD to try to get the latest graphics driver:

  http://support.AMD.com/us/gpudownload/Windows/pages/auto_detect.aspx

  According to me, a recent update of Windows, maybe the 2778344 which updates win32k.sys to the 6.2.9200.16503 version, could cause a conflict with the AMD graphics driver.

  Many users report the same error recently and so far have all AMD/ATI graphics cards.

  If all goes well the graphic driver update will help.

  If the problem persists, consider uninstalling 2778344.

  Then, at the moment, 'hide' 2778344.

• My Mac crashed and I had to reinstall everything. Photoshop keeps giving me the following error message, even after multiple uninstalls and reinstalls: error 16. It is impossible to get support from adobe - no one to call. It's for Photoshop 13.0.6 and

  My Mac crashed and I had to reinstall everything. Photoshop keeps giving me the following error message, even after multiple uninstalls and reinstalls: error 16. It is impossible to get support from adobe - no one to call. It's for Photoshop 13.0.6 and Mac Os 10.10.5 help please. Please respond by email to [email protected]

  I got this error 16 experience on my Macbook. The permissions for the Application Support folder have been changed.

  A simple fix Terminal can take care of that.

  Open Terminal (you can just tap Terminal in Spotlight to find it).

  Copy and paste this command in Terminal: sudo chmod-r 777 library/Application\ Support / Adobe

  Press enter, give your password if requested, and then try again. You may need to restart your Mac.

  Gene

• Get the 16 error in Photoshop CC2014 even after installation and reinstallation of mac maverick last updated 10.9.5

  Get the 16 error in Photoshop CC2014 even after installation and reinstallation of mac maverick last updated 10.9.5

  Check if that helps. http://helpx.Adobe.com/x-productkb/policy-pricing/configuration-error-CS5.html

  ~ David

• Compaq Elite 8300 AIO: Blue screen on reboot of the system after sysprep

  After syspreping the computer to restart the computer, I have BSOD (blue screen) with the message:

  STOP: 0x0000007E (0xFFFFFFFFC0000005,...) without any additional information on the driver

  the image works perfectly before syspreping, I know that it is a driver issue, which should be removed after the generalize in the sysprep, I don't have a wireless network card

  Thank you!

  We always using ghost to deploy our image but we have different models, I always use the latest model that we receive to capture my image. The sysprep command is supposed to cleaning drivers and drivers from a defined location will apply depending on the model.

  without knowing the pilot originally, I tried to change the drive (from an operational model) but the same result, my graphics card is built into my motherboard.

  I solved the problem by replacing the folder: "c:------windows-system32-drivers" coming from an old image of operation.

  But I have to watch on my file sysprep to see why it does not consider my drivers folder and use than the windows folder

• Windows 7 Blue Screen Of Death after HDD Turnt off automatically. ;-; Help?

  So, I had a break from my computer for 30 minutes and then I went back and when I moved my mouse to wake it up. He did all the normal sounds and I was about to click on Cinema 4 d but then the blue screen of death that happened. This isn't the first time. The last time I lost some of my files :(

  Help, please.

  MEMORY. DMP: https://www.mediafire.com/?282vd0lmebffc8w

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

• Windows 7 x 64 Pro blue screen intermittently on the new system

  I recently created a workstation and noticed that, sometimes, we get a blue screen.  Error message:

  Windows has recovered from an unexpected shutdown
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  More information about the problem:
  BCCode: 50
  BCP1: FFFFF940C27298A0
  BCP2: 0000000000000000
  BCP3: FFFFF9600007263C
  BCP4: 0000000000000005
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1
  Files helping to describe the problem:
  C:\Windows\Minidump\052214-12136-01.dmp
  C:\Users\Samuel\AppData\Local\Temp\WER-18018-0.SysData.XML

  Details of the system:

  Windows 7 Professional SP1
  Processor: Intel Core i5-4570 CPU @ 3.20 GHz
  RAM installed: 8.00 GB
  System type: 64-bit Operating System
  Main logic board: ASUS B85M-E/CSM
  DIMM: Patriot Viper DDR3 PC3-12800 16 MHz 8 GB
  Storage: SSD Samsung 120GB SATA 840EVO
  Storage controller: Intel 8 series/C220 SATA AHCI Driver 12.0.0.1082
  Monitors: 3 x LG 27EA33V-B
  Embedded video: Intel HD Graphics 4600, pilot 9.18.10.3186
  Network: 1GbE Realtek, pilot 7.67.1226.2012

  There IE 11.0.9600.17107, but I do not normally use, I use rather Firefox 29.0.1, but only for e-mail and 4 websites; I don't do any surfing.

  I have installed MS Security Essentials and set automatic updates.  IE has old what only once, with 11.0.8 update.  Windows has already updated several times.

  I hope I can join the 2 files related error referred to in the above message.  I put this in the performance and Maintenance category as that seemed the closest to this question.  Can someone please help me to get because of the deep on this problem?

  Thank you

  TD

  P.S. I don't seen any possibility to attach files, it might go to the private message.

  Yes, thank you!

  The attached file of the DMP is the verification of bug PAGE_FAULT_IN_NONPAGED_AREA (50) .

  This indicates that invalid system memory was referenced.

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  ------------------------

  1. uninstall Asus PC Probe as well as any other Asus bloatware as soon as POSSIBLE.

  2 run Memtest for NOT LESS than 8 ~ (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  Note that some older generation motherboards do not support USB boot, your only option is CD (or floppy if you really wanted to).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick

• Blue screen of death after I intalled Windows XP Prof

  OK Let's go I hope someone can help me! I have sinned in the eyes of Lenovo and deleted the partition of Nova Scotia on my Y710 and installed a dual boot XP Prof and Windows Vista Bussiness system not on different partitions, but on separate hard disks, I added an another 160gig hard drive to my system. I had to do this for reasons of bussiness log on my server of bussiness and like you all without TEACHER XP and Vista Bussiness and above can log on to a domain server, but now I have a problem with the two operating systems Vista Buss is very slow on the network and my biggest problem is Windows XP Prof who after a few minutes after it starts throw a blue screen and restarts just with a critical error message that this is the case whenever I keep on reinstall, but nothing seems to help. Please help guys I need this phone to work as my job become more behind whike I am struggling to untangle the computer I'm realt desperate at this point.

  Thank you so long

  Concerning

  Martin

  Hi skripatch

  Thanks a lot for trying to help, but I think I found the problem. The culprit was Norton Internet security 2008. I uninstalled and so far for the last two hours my computer has not crashed again. Maybe you can me why Norton will do and if it is possible that it was incompatible with one of the drivers of Lenovo. Another thing can u sugest a good security program preferably something I can buy and download online.

  Thank you

  Martin

• When I turn on my blue screen laptop appear after windows error recovery windows also appear

  When I turn on my laptop, a blue screen appears after windows error recovery windows appear also... ask in safe mode are normal windows startup?... what I can do... is a problem on my system?... Please help me...

  Hello

  ·         What operating system is installed on the computer?

  ·         What are the error messages that are displayed on the blue screen?

  ·         Did you make any changes before the show?

  In the recovery menu, select Safe mode and check if you can connect?

  You can also try to restore the system in safe mode.

  If you are able to boot to the desktop in safe mode, then I suggest you put the computer to boot in safe mode and check if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Reference: resolution in Windows 7 stop errors (blue screen)