Help button OBIEE front-end

Similar Questions

• Get reports sent even when there is no data - PUB BI front-end

  To the help of the front end (not API), how can we avoid the sending of the report when there is no data?

  We do not yet have all the features... I have an idea for an ugly devil that might work:

  Write in your model a state similar to a division by 0, which is triggered when
  There is no data. If the build fails may not send it.

  Klaus

• Best way to implement a help button?

  I wanted to put a "Help button" in my program where the user needs to know what to do. My first try was to add a structure of the event, but that seemed to make the program which I don't really want to hang on. The sequence of flat is because I don't know how else to wait for the user to create a new spreadsheet file. I feel like there must be a more pleasant way to do so with three while loops and local variables, but I'm not sure how... Thanks for any help, the picture is attached.

  

  You already got some good advice, so let's quickly look at your code of origin for the problem areas:

  • Because you use a popup that blocks the local while loop, even though it is visible, it must be in a separate loop. So that's good. Yet, instead of constantly running this loop, a structure of the event is preferable. Because you can also capture the stop event, you can eliminate the local variable and return the stop knob to lock the action as it should.
  • You have probably forgotten to uncheck ' front lock panel until the end of the event ", so the Panel before on appellant VI remain unmoved until the popup is closed. Personally, I make one using dialogue simple Subvi and use an event to toggle the visibility of the façade of the Help window instead. Given that it does not block, it can potentially be done in the main loop.
  • Data flow for long periods of time in a file, you must use a file IO. You create a lot of overhead, opening and closing the file on each iteration. Open a reference file, write the header before the loop, keep adding inside the loop and close the file we ended the loop.
  • According to the sampling intervals are how long, you should do the writing of the file in the case of an event structure time-out and add a case of stop. This makes it easy to immediately stop the VI, although the expectation is set in minutes or hours. If other events are allowed, you must make sure that the time-out is adjusted accordingly to maintain an equal pace. (See for example this old example posted here)
  • Get rid of the structure of sequence and this silly loop on the left. Keep the time-out period in an initialized to-1 shift register (= infinity) and add a startup event where you set the time-out to the desired value.
  • Soon, you have a nice state machine...

• The NI USRP-295xR RIO allows a front-end Ettus BasicRX IF-sampling? And what is the rate of the ADC to FPGA data?

  Hello!

  I'm in the quest to replace some aging PCI-5640R. I am currently using as a portable-Journal data solution, mounted in a Magma Expresscard to PCI box with a laptop. As a reference of the time, I use a Symmetricom XLi.

  The equipment is dependent on the sampling finished a set of samples once a trigger signal goes high and also receive antenna azimuth information using two lines PFI more. The signal is sampled at IF, 30 MHz, and the signal is less than 5 MHz bandwidth.

  Now, I started watching the Ettus X 301 with a GPS OCXO and MXI-express interface which should be the same as the USRP-295xR NI. It is available as device NI RIO with three different front ends, unfortunately, none of them work at 30 MHz.

  Q-1: Ettus has the front-end 'BasicRX', but it is only considered compatible with LabVIEW driver and not necessarily with the RIO. Is the front-end BasicRX usable with the USRP - 295XR RIO and MXI-interface with LabVIEW FPGA? Should I just avoid trying tune the nonexistent LO? As long as he gives me data, I can live with some error messages during the Setup...

  It's the best solution for me, but if it is absolutely impossible, I have a few questions:

  Q-2: information on the front end are really rare in the pages Web OR both Ettus, but the WBX is listed up to 50 MHz frequency, to have a filter of low pass of bandwidth of 40 MHz to I and Q. This should mean a total of 80 MHz of bandwidth with I and combined Q,-40 to 40 MHz. Why did the bandwidth to Web pages as OR listed being "40 MHz bandwidth in real time", if the low pass filter of the WBX is 40 MHz in I and Q? Not the band total bandwidth or 80 MHz?

  Q-3: assuming a bandwidth-40 to 40 MHz: could I put the WBX LO at 50 MHz, be tuned to the frequencies from 30 MHz to 20 MHz signal,-20 MHz and use a bandpass filter to the FPGA to extract the new signals and remove all other signals?

  Q 4: I tried to start a FPGA project in LabVIEW and add the x 301/294xR/295xR as a target. Data clock is locked to 120 MHz, which I guess means he will receive no data to 120MS/s IQ? The x 301 Ettus is listed as provide data of the ADC to the FPGA at a rate of 200 ms/s, could someone explain to me why, OR USRP RIO expects only database 120MS/s?

  Hi Idar,

  Yes, you should be able to put the basics on your X 310/USRP RIO and use LabVIEW FPGA to receive 120 MECH. / s of the DACs.  The example I posted is in fact not for the precompiled file bit.  The example I posted is for LabVIEW FPGA, which allows you to add the IP address for the FPGA.  There is a sample project that comes with LabVIEW FPGA which is the recommended starting point to build your FPGA application.  The sample project has all the configuration set up as well as broadcast continuously and pads/FIFOs in the FPGA and examples for synchronization.  There are comments in the code example that show where he must add your own blocks of property intellectual as a filter and decimater you mentioned.  The PDF I posted shows what changes you must make to this sample project using the Remora Basic/LF.

  I would like to know if I'm not explaining this clearly, or if you have any questions, I'd be happy to help you!

• How to create a help button on the Panel before the VI?

  Hello

  I want to create a button for example a help button on the front of the VI so pressing that any new user can open folder in which I store some guidance assistance.

  Means do I have a folder on my desktop that I save all data which should prove useful for new user so if some new user want to run the program, and he has no idea how to run the program then he can simply press the help button and after pressing this issue of aid will be open then read then user instruction may start the program.

  Hope you get my point.

  Thank you very much.

  I think the problem is now resolved...

  Here I attached screenshot of the solved problem that might be of help.

  I thank very you much for your help and your time.

• first time front-end development task, need advice

  Hello

  I have designed a database, encoded further while plsql for everyday activities, so far, everything has worked well, but all these operations are performed using the developer sql (sql worksheet), now I'm looking to pass it on to a potential customer but the point is hes not tech savvy but would require a front-end now, I myself have been a total back-end resource (database design, plsql, sql, sql tuning/DBA) now reluctantly I start to learn some tools front end, I ask you to help me with a few heads upward and it would be great if you could answer my questions (if I'm not in the apology of the appropriate forum Please point me to the right one), so here are my questions:

  (1) there is a few years that I was part of a project that was oracle as backend and he had .NET as a front end, now I am wary of .NET, I prefer to use something that is more tightly integrated with oracle and I guess I can use JAVA for front end, right? If large, if you could point me in the right place (any resource that can give me a quick start) or if you could tell me what it is, is - it is known as java forms?

  (2) what do I need for the front-end development? I have jdk and jre installed in my system? that I am, I guess for download? I worked in eclipse, some front end for 1 ten years java development tools, but I'm quite out of reach.

  (3) what should I study to become proficient in the front-end development?, I don't know he must do something with java with something and not java base.

  (4) all other things I should know before addressing the front-end development, let me know.

  Concerning

  Rahul

  From my point of view ADF should not be used for a thick desktop application. ADF is best use for lightweight client web applications. You can use the ADF for desktop with swing, but he has not maintained and obsolete.

  Forms is an option but not free.

  You can watch in java fx with NetBeans.

  Timo

• Front end page do not open for R12 on Windows

  Hello

  Front end page do not open for R12 (R12.1.3) on Windows server 2003.

  opmn services running and no error in the newspaper to opmn. Whereas when checked application.log of oacore below. Please help as im not able to interpret errors.

  
  Due to: java.io.FileNotFoundException: E:oracleORADBinstappsORADB_server1 fnd12.0.0secure\E:oracleORADBinstappsORADB_server1 fnd12.0.0secureORADB.dbc (the file name, directory name or volume label syntax is incorrect)

  at java.io.FileInputStream.open (Native Method)

  at java.io.FileInputStream. < init > (FileInputStream.java:106)

  at java.io.FileInputStream. < init > (FileInputStream.java:66)

  at oracle.apps.fnd.common.GenericEnvironmentStore.load(GenericEnvironmentStore.java:177)

  at oracle.apps.fnd.common.AppsEnvironmentStore.load(AppsEnvironmentStore.java:400)

  at oracle.apps.fnd.common.AppsEnvironmentStore.loadDbcFile(AppsEnvironmentStore.java:488)

  at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:527)

  ... 24 more

  13/07/18 16:21:07.834 html: Servlet error

  java.lang.ExceptionInInitializerError

  to oracle.apps.fnd.sso.Utils. < clinit > (Utils.java:674)

  at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:221)

  at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:287)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.loadServlet (HttpApplication.java:2379)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.findServlet (HttpApplication.java:4830)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.findServlet (HttpApplication.java:4754)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.getRequestDispatcher (HttpApplication.java:2978)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpRequestHandler.doProcessRequest (HttpRequestHandler.java:738)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpRequestHandler.processRequest (HttpRequestHandler.java:453)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.AJPRequestHandler.run (AJPRequestHandler.java:313)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.AJPRequestHandler.run (AJPRequestHandler.java:199)

  to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)

  at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)

  to oracle.oc4j.network.ServerSocketAcceptHandler.access$ 700 (ServerSocketAcceptHandler.java:29)

  to oracle.oc4j.network.ServerSocketAcceptHandler$ AcceptHandlerHorse.run (ServerSocketAcceptHandler.java:879)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)]. util. ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)

  at java.lang.Thread.run(Thread.java:619)

  Caused by: oracle.apps.fnd.common.PoolException: failed to create new database connection.

  to oracle.apps.fnd.security.DBConnObj. < init > (DBConnObj.java:250)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)

  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)

  at oracle.apps.fnd.common.Pool.createObject(Pool.java:1273)

  at oracle.apps.fnd.common.Pool.borrowObject(Pool.java:1027)

  at oracle.apps.fnd.security.DBConnObjPool.borrowObject(DBConnObjPool.java:584)

  at oracle.apps.fnd.security.AppsConnectionManager.borrowConnection(AppsConnectionManager.java:330)

  at oracle.apps.fnd.common.Context.borrowConnection(Context.java:1719)

  at oracle.apps.fnd.common.AppsContext.getPrivateConnectionFinal(AppsContext.java:2314)

  at oracle.apps.fnd.common.AppsContext.getPrivateConnection(AppsContext.java:2251)

  at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:2108)

  at oracle.apps.fnd.common.AppsContext.getLocalJDBCConnection(AppsContext.java:2490)

  at oracle.apps.fnd.common.AppsContext.getLocalJDBCConnection(AppsContext.java:2425)

  at oracle.apps.fnd.common.AppsContext.getLocalJDBCConnection(AppsContext.java:2406)

  at oracle.apps.fnd.common.NativeProfileStore.getInstanceName(NativeProfileStore.java:1020)

  to oracle.apps.fnd.common.NativeProfileStore. < init > (NativeProfileStore.java:159)

  at oracle.apps.fnd.common.AppsContext.instantiateProfileStore(AppsContext.java:3991)

  at oracle.apps.fnd.common.AppsContext.makeProfileStore(AppsContext.java:789)

  at oracle.apps.fnd.common.Context.setProfileStore(Context.java:767)

  at oracle.apps.fnd.common.Context.setProfileStore(Context.java:749)

  at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:573)

  at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:533)

  to oracle.apps.fnd.common.AppsContext. < init > (AppsContext.java:301)

  to oracle.apps.fnd.common.WebAppsContext. < init > (WebAppsContext.java:1147)

  at oracle.apps.fnd.sso.Utils.getAppsContext(Utils.java:549)

  at oracle.apps.fnd.sso.SessionMgr.loadInstalledLanguages(SessionMgr.java:4058)

  at oracle.apps.fnd.sso.SessionMgr.getInstalledLanguages(SessionMgr.java:3852)

  at oracle.apps.fnd.sso.Utils.getBaseInstalledLangCode(Utils.java:1490)

  to oracle.apps.fnd.sso.Authenticator. < clinit > (Authenticator.java:45)

  ... more than 17

  Due to: java.io.FileNotFoundException: E:oracleORADBinstappsORADB_server1 fnd12.0.0secure\E:oracleORADBinstappsORADB_server1 fnd12.0.0secureORADB.dbc (the file name, directory name or volume label syntax is incorrect)

  at java.io.FileInputStream.open (Native Method)

  at java.io.FileInputStream. < init > (FileInputStream.java:106)

  at java.io.FileInputStream. < init > (FileInputStream.java:66)

  at oracle.apps.fnd.common.GenericEnvironmentStore.load(GenericEnvironmentStore.java:177)

  at oracle.apps.fnd.common.AppsEnvironmentStore.load(AppsEnvironmentStore.java:400)

  at oracle.apps.fnd.common.AppsEnvironmentStore.loadDbcFile(AppsEnvironmentStore.java:488)

  at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:527)

  ... 24 more

  13/07/18 16:21:17.783 html: error initializing the servlet

  java.lang.NoClassDefFoundError: has not been initialized class oracle.apps.fnd.sso.Utils

  at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:221)

  at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:287)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.loadServlet (HttpApplication.java:2379)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.findServlet (HttpApplication.java:4830)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.findServlet (HttpApplication.java:4754)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.getRequestDispatcher (HttpApplication.java:2978)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpRequestHandler.doProcessRequest (HttpRequestHandler.java:738)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpRequestHandler.processRequest (HttpRequestHandler.java:453)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.AJPRequestHandler.run (AJPRequestHandler.java:313)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.AJPRequestHandler.run (AJPRequestHandler.java:199)

  to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)]. util. ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)

  at java.lang.Thread.run(Thread.java:619)

  13/07/18 16:21:17.783 html: Servlet error

  java.lang.NoClassDefFoundError: has not been initialized class oracle.apps.fnd.sso.Utils

  at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:221)

  at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:287)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.loadServlet (HttpApplication.java:2379)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.findServlet (HttpApplication.java:4830)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.findServlet (HttpApplication.java:4754)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.getRequestDispatcher (HttpApplication.java:2978)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpRequestHandler.doProcessRequest (HttpRequestHandler.java:738)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpRequestHandler.processRequest (HttpRequestHandler.java:453)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.AJPRequestHandler.run (AJPRequestHandler.java:313)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.AJPRequestHandler.run (AJPRequestHandler.java:199)

  to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)

  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)]. util. ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)

  at java.lang.Thread.run(Thread.java:619)

  
  Kind regards

  Hi Hussein.

  As mentioned earlier all scripts have been closed on with error Timed out (3750000): Exception interrupted during autoconfiguration.

  The problem solved because I forgot to mention there was conflict of resources on the application server in which grep.exe (process of almost 10/12) were consuming most of the cpu and memory. Had to restart the server to get rid of this process. Once done, there is no contention and autoconfig completed successfully. Compiled by the suite of jsp and the services started. Got the login page and work fine now. Thanks for your help. Nice day...

• Front-end Web

  Hello
  
  I don't know if this is the right forum for my needs, but I need to start somewhere.
  
  Currently, we allow the users to search, review and update of data from our database in a web front end. Its very simple and use PL/SQL to query the tables and then HTML to display the results in tables.
  
  It is adapted to our needs for a while, but now we can view and update the tables in their direct format, that is, if I'm filling out a simple form of first, last and email etc. I would like updates to happen because I typed and have no click and update button. The problem that we face is we can only update one row at a time using a button and need to be able to just update the tables that we will.
  
  (A) is - it possible, can you point me to some documents and b) if not otherwise, we could accomplish?
  
  Thank you very much

  Rudolf, is not strictly a PHP response, but if I were you, I would check out Apex 4.1.1. It's a wonderful development, free as in "free beer", very easy to use tool and the best thing is that it comes with your database. If you are using a version 11 g, chances are that Apex is already installed, even if a somewhat older version. Request Express, affectionately called "Apex" is available from OTN.

• Front end (web?) for scripts

  Hello:

  I have a task to write a front-end for my users and let them to run scripts through the front-end interface.

  I would really appreciate if anyone can share any ideas how I can do? I didn't even choose which scripts that I use - Perl or PowerShell...

  The idea is that users could run scripts from their desktop computers database - just go to the web page, or a shared folder and choose everything that they need, if it is possible...   I don't want to install any Tollkit VI on the user workstations.

  If it is possible to do it without huge effort's going to be great, otherwise...

  Once again, please share your opinion or if you experience.

  Thank you very much in advance,

  olegarr

  That is exactly the case of the use of VESI, you would have a nice graphical interface and be able to do exactly what you said but the downside of things is that users will have powershell/vi toolkit on machines out there as well as the application.

  If the security you are woried about you can always secure permissions in your VC to allow that to do what they must, therefore, also active through their VI Toolkit cmdlets.

  If you found this information useful, please consider the allocation of points for correct or helpful.

  Alan Renouf

  http://Virtu-al.NET

• Appearing to duplicate records with a KIN of Oracle Applications Front End

  Hi all
  
  Please help solve this problem.
  
  We have 300 kins CW, we want to hire those employees.
  
  The process that we have done is as follows,
  We have terminated this kins CW on March 25, 2011, and have been an employees March 26, 2011.
  Now person cw type changed worker contingent
  workers Ex-Contingent and there at worker contingent employee.ex after hirring.
  
  Now again we have changed the hiring date from March 26 to March 25. (According to customer request). No details of Assignmnets
  updated if we changed the date hired easily.
  (Process: update the last field of start date of window the 26 th to 25 and saved people,)
  It's that welcomed and hirinf also changed date to March 25, no problems here)
  Now, the separation and hiring were arriving on the same day.
  
  
  But if I ask that all this 300 employees (page Oracle Application people - enter and maintain)
  research by giving window change the entry date as 25-march2011, iam get 2 discs with the same employee number that day only.
  If I have queries on 26 then iam getting only one record.
  
  IN back/database main is to show a 1 plug in all cases.
  
  
  can u tell me the reason to retify front end why it shows 2 records at atime in one day and how to solve this problem.
  
  Thank you-
  Sowmya.

  I expect that you will find that when you click on the two cases, they return the same person, right?

  In fact, I didn't think it was possible, I thought earlier you can hire an employee is the aftermath of the CWK (known as a rental back to back) left. If this is the case it is probably a bug in Oracle and you exploited which could mean that the bug causes problems elsewhere - you might want to raise a SR Oracle to verify this.

  In terms of why the search window showing two records this is very likely how the SQL is pulling data: half of a UNION statement Gets the employees and the other half casual workers.

• Application front end error after importing the script executed successfully in R12

  Hello
  I got an exception in the environment of R12.
  I developed a simple page of the OPS and deployed in apps to import the script runs successfully.
  but when I open this page at the Front end will give an exception.
  
  It's
  Details of the exception.
  oracle.apps.fnd.framework.OAException: could not load application module 'tflsm.oracle.apps.po.per.server.TflsmAM '.
  
  
  # # 0 in detail
  Houston-30003: the application pool (cph-oadb - tst22.dk.flsmidth.netTST221543tflsm.oracle.apps.po.per.server.TflsmAM) failed at the checkout a module of application because of the following exception:
  oracle.jbo.JboException: Houston-29000: Unexpected exception caught: oracle.jbo.JboException, msg = Houston-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg = Houston-25002: type tflsm.oracle.apps.po.per.server.TflsmAM ApplicationModule definition not found
  at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
  at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
  at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
  
  
  
  # # 0 in detail
  oracle.jbo.JboException: Houston-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg = Houston-25002: type tflsm.oracle.apps.po.per.server.TflsmAM ApplicationModule definition not found
  at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:545)
  at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2094)
  at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1961)
  
  
  # # 0 in detail
  oracle.jbo.NoDefException: Houston-25002: type tflsm.oracle.apps.po.per.server.TflsmAM ApplicationModule definition not found
  at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:441)
  
  
  Houston-30003: the application pool (cph-oadb - tst22.dk.flsmidth.netTST221543tflsm.oracle.apps.po.per.server.TflsmAM) failed at the checkout a module of application because of the following exception:
  oracle.jbo.JboException: Houston-29000: Unexpected exception caught: oracle.jbo.JboException, msg = Houston-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg = Houston-25002: type tflsm.oracle.apps.po.per.server.TflsmAM ApplicationModule definition not found
  at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
  at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
  
  
  # # 0 in detail
  oracle.jbo.JboException: Houston-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg = Houston-25002: type tflsm.oracle.apps.po.per.server.TflsmAM ApplicationModule definition not found
  at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:545)
  
  
  # # 0 in detail
  oracle.jbo.NoDefException: Houston-25002: type tflsm.oracle.apps.po.per.server.TflsmAM ApplicationModule definition not found
  at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:441)
  
  
  I will check all the class files and the Application Module below top xml files, are all there in the top server (less)
  / U02/TST22/Apps/apps_st/COMN/java/classes/xxfls
  
  but I got the exception.
  
  is there a different structure in R12.
  i.Ein the/u02/TST22/apps/apps_st/comn/java/classes/xxfls top of the page from the server (here my class all files in xml files and binary mode in ASCII mode)
  Only the CLASS files are needed or the XML files are also needed. (I'm moving all CLASS and XML files)
  
  could you please help me on this.
  
  Thank you, regards,
  Muthu

  Hello

  -In the same way it is you are oracle also... ?

  / U02/TST22/Apps/apps_st/COMN/java/classes/xxfls

  Concerning
  Meher Irk

• How to get front end table name

  Hello
  
  How to get front end table name in EBS 11i?
  
  thanx
  Ashish

  help > about this recording

• To avoid writing code with the front-end database

  Hello
  
  I'm working on a database application using database 10 g as backend and front-end dotnet. I want to run only oracle stored procedure to select all (to avoid the hard parse and use bind variable), operations DDL and DML. just to avoid writing code database with the front-end server. Can someone give me please a little examples of:
  
  1. Select the output of the query to be returned in the result set of the stored procedure.
  
  2. DML for example of stored procedure.
  
  3. stored procedure DDL examples.
  
  using scott.emp, so that I just called the stored procedure, rather than selecting on the don, DML or DDL commands at the front end. Even though I read in the documentation, but a cup examples will help me to enter a clear concept as well.
  
  Thanks and greetings
  Girish Sharma

  Hello...

  --> Select example
  create or replace procedure get_emp (rc on sys_refcursor)
  is
  Start
  Open rc to select * from emp;
  end;

  --> Example of DML
  create or replace procedure do_dml_emp (pempid in number,
  pempname varchar2,
  Result number)
  is
  Start

  insert into emp(empid,empname) values(pempid,pempname) return empid as a result;
  exception
  while others then
  result: =-1;
  end;

  --> Example of DDL
  create or replace procedure ddl_emp (varchar2 column name,
  ColType varchar2,
  Result number)
  is
  Start
  result: =-1;
  run immediately 'alter table emp add column' | colname | ' ' || ColType;
  result: = 1;
  end;

• AppleScriptObjC help button

  Hi all

  I found how to display a Help (help) in alerts using the setShowsHelp command.

  I want to display a short text in one simple window (another alert?) when this button is clicked.

  I'm good at Applescript but totally new to AppleScriptObjC.

  All the setShowsHelp: method is to put a button in the alert - is your responsibility to implement.  The first step is to define the delegate of the alert (your AppDelegate, for example) and add a alertShowHelp: Manager to it.  When this is done the handler is called when the user clicks the help button.  To set up your own alert, take a look at other methods of the class NSAlert:

  set alert to current application's NSAlert's alloc's init()
  alert's setMessageText:"Alert"
  alert's setInformativeText:"Information"
  alert's runModal()
  

• Help button works only on firefox. How to fix?

  Help button does not.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes