Help continuity when using 4 (old) and El Capitan (keeping an eye on my 9 year old)... I'm new to mac is so go easy on me.

Similar Questions

• When using Sky go and try to watch movies or programs how do I get to run continuously without interruption and catch every few seconds.

  Go to sky

  When using Sky go and try to watch movies or programs how do I get to run continuously without interruption and catch every few seconds.

  The usual cause of this is that your broadband connection is not fast enough or you have multiple computers, try to use it at the same time.

  This allows to check your speed broadband http://www.bbc.co.uk/iplayer/diagnostics#results

  If the broadband speed does not seem to be the problem, please contact Sky

  http://helpforum.sky.com/T5/using-Sky-go/BD-p/skygo_using

• I have the same problem - a code error 80070643. Can anyone help. I use Windows 7 and Microsoft 2010 (trial version)

  Can anyone help. I use Windows 7 and Microsoft 2010 (trial version).

  Hi DonDonaldo,

  1. what windows update did you install?

  2. When was the last time you were able to install updates?

  3. do you have security software installed on the computer?

  Windows Update error80070643 can happen for several reasons. The most common cause is a problem with the .NET Framework is installed on the computer. You can also encounter this error when installing updates for Microsoft Office 2003.

  If you were installing Microsoft Office 2003 updates when you received the error, follow the instructions in the "Microsoft Office 2003" section below. Otherwise, follow the instructions in the section "Windows.NET Framework".

  The .NET framework is a component of Windows that is used to build, deploy, and run programs and applications. Unfortunately, it may be damaged by some programs, viruses or hard drive problems.

  To automatically repair the .NET Framework

  1. click on this link:repair .NET Framework

  2. in thefile download dialog box, click run, and then follow the steps in the wizard.

  3. open Windows Update by clickingStart , all programsand then clickWindows Update.

  4. in the left pane, clickcheck for updates, and then wait while Windows searches the latest updates for your computer.

  5. If updates are found, clickinstall updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  If the previous steps do not solve the problem, you can reinstall .NET Framework manually, but the steps are intended for advanced users. If you are not comfortable performing these steps, ask a friend to help you. You will find the steps in the article toreinstall .NET Framework on the Microsoft Web site.

  Microsoft Office 2003

  To resolve this problem, you may need to restart the Office Source Engine (OSE) service and try again to install the latest updates for Office products.

  To restart the Office Source Engine (OSE) service

  You must be logged on as administrator to perform these steps.

  1 open administrative tools by clicking theStart button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click onServices. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. If theOffice Source Engine service is disabled, double-click it to open the service properties.

  4. click on the listStartup type , click Automatic (delayed start), and then clickapply.

  5. underService status, click Start.

  Windows Update error 80070643

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  You receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services

  http://support.Microsoft.com/kb/903772

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I bought the Adobe Creative Suite master collection over the past two years with my old mac. I bought a new mac, can I continue to use the old serial number? If not, where can I get the serial number?

  I bought the Adobe Creative Suite master collection over the past two years with my old mac. I bought a new mac, can I continue to use the old serial number? If not, where can I get the serial number? Where I am, I guess that contact to?

  Yes, your license allows you to have two facilities activated simultaneously, so if you want to you can have both machines busy and active so that there is a backup should it come in handy.  You can also contact Adobe via chat and ask them to reset your activations so that you have one (or two) released for a new installation.

• My computer guess I'm pressing the ALT key. I even searched my PC for viruses, but nothing helped. I use windows 7 and an Acer laptop.

  My computer guess I'm pressing the ALT key. I even searched my PC for viruses, but nothing helped. I use windows 7 and an Acer laptop. Is there a solution?

  See re keyboard Acer support pages, will appear you have inadvertently the value of this option (or their forums) is not a win7 issue, but an Acer one

• I am user of Lightroom 5. Consider purchase version 6. Not happy with the subscription option, bcs, it looks like a year of use I will not be able to continue to use this version and you want me to pay more to continue to use LightRoom 6. Is this good? If

  I am user of Lightroom 5. Consider purchase version 6. Not happy with the subscription option, bcs, it looks like a year of use I will not be able to continue to use this version and you want me to pay more to continue to use LightRoom 6. Is this good? If so - I'll stay with Lightroom 5.

  You have two options to switch to Lightroom 6:

  1. Subscribe (including Photoshop CC 2014), or
  2. Buy the traditional way CS6 upgrade:

  Products

  Click buy

  I want to buy: menu, choose Update (instead of the default is Full)

  I own: Photoshop Lightroom 5.x

  Make your purchase.

• just upgraded to ch 2014, when using contact sheets and by adjusting the results of font sizes in the spacing between the images bigger and bigger while the size of police remains the same. See you soon,.

  upgrade to ch 2014, when using contact sheets and by adjusting the results of FontSize to spacing between the images grows while the font remains the same size.

  Someone at - it ideas on why this is happening.

  See you soon,.

  PAul

  Hi Paul,.

  There is a bug in the script that affects text attributes. We are now studying.

  In the meantime, xbytor updated the plug contact to work around the problem. You can find it here: ContactSheetX 2.1 released

  Kind regards

  Steve

• How do I resize BOTH the frame AND the image? I used to use the command and shift (to keep the proportions), but NO keys working!

  How do I resize BOTH the frame AND the image?

  I just started using CC online I usually use the command and shift (to keep the proportions), but NO keys work now!

  It's frustrating to have to resize the image and frame separately. The SHIFT key does not keep the proportions more!

  The shortcuts have changed?

  I'm on Macbook Pro - Yosemite.

  Please help me! Thank you!

  In the panel control is a check box resize the content with the framework.

• Deal with failure when using LabVIEW 2011 and DSC MODBUS communication

  I'm currently reading from operating records a PLC with MODBUS/TCP. I confirmed that the PLC will update the values and in response to a MODBUS communication correctly by using a third-party program called Modbus Poll. However, when I try to query the PLC using the LabVIEW shared variable engine, I am unable to read the values of the same addresses that I consult with Modbus Poll.

  My installation is simply to a PC directly connected to the controller via Ethernet without a router between the two. I'm using LabVIEW 2011 SP1 with the DSC module.

  I opened the Manager of distributed systems OR to display the State of all variables in the Modbus Library that I created, and I noticed that the ILO CommFail permanently the value 'true '. All other variables with a 'read' access mode signal "failure of process". I tried to restart the process and stop and start the local variable engine without success. I also restarted my computer several times to see if any services did not exist, but this does not appear to have solved the problem.

  Finally, I resorted to listening to communications on the network card I have the PLC connected via Ethernet using Wireshark and found that while Modbus Poll communicates with PLC, number of MODBUS and TCP packet is sent and received. However, when using only LabVIEW or the DSM OR communicate with the controller, there don't seem to be any communication on the network card.

  Something that may be interesting to note is that I could communicate with the PLC and to read values with the DSM just once, when I understood everything first what address I should be reading of. All of this has stopped working shortly after. Prior to this, 'CommFail' was not generally set to 'true' with my current setup. Thinking it was my firewall, I have since disabled my firewall, but this seems to have had no effect on the problem either.

  Any help on this would be appreciated.

  So, I thought about it. It turns out that the IP address of the server i/o MODBUS must be set to the address of the MODBUS slave, not the local computer. The address of the i/o MODBUS server is defined by the navigation in the Explorer window projects, expanding the variable engine shared library for MODBUS and right click on the server MODBUS (for example Modbus1) item and select Properties.

  In addition, the addresses seem to be shifted by + 1.

  Thanks for the tip so.

• When using the merge and when to use updated

  Hi friends,

  Given the best performance... purpose of this discussion is when we should use statement UPDATE and when we should use MERGE statement in oracle update of thousands of records.

  Kindly Guide.

  Kind regards

  Himanshu

  Hello

  Looking for a couple to a few rules that you can use to decide whether to use the MERGE or UPDATE, without actually testing two meanings?

  If so, use MERGE when

  (1) (sometimes) need to add new lines

  (2) it is simpler.  This includes special cases

  (2A) an UPDATE statement uses a subquery in the SET clause and then (mostly) repeats the same subquery in the WHERE clause

  (2B) you want to use the analytical functions or CONNECT BY in a subquery

  These rules are NOT guaranteed to work in all situations.

  Kimmy says:

  Hello

  ... My requirement is only UPDATED records about 200 to 500K (NOT followed by update of insertion).

  So the rule (1) above does not apply in this case.

  What I observed in the update using a MERGE statement and UPDATE is:

  Update with the MERGER was faster however explain the bytes consumed to the query plan MERGE has been compared more update.

  Use the tool that works best for your needs.  If users are complaining that something shows more bytes used in a plan to explain, so maybe it's a reason for the UPDATE.

  Where I work, where is the fastest is usually more important.

  In addition, I want to get clearity

  1. "if I should use MERGE if I need to update recrods using the unique table" as shown below: OR update will be good to use in this case:

  MERGE INTO MKT_DATA inmkt

  C using (SELECT Customer_Code, region, State OF CUSTOMER_DATA)

  ON (inmkt. Distributor_Code = c.Customer_Code AND inmkt. DISTRIBUTOR_CODE IS NOT NULL)

  WHEN MATCHED THEN

  Updated the inmkt VALUE. Distributor_Region = c.Region,

  inmkt. C.State = Distributor_Province;

  UPDATE MKT_DATA inmkt

  SET (inmkt. Distributor_Region, inmkt. Distributor_Province) =

  (SELECT c.Region, c.State OF CUSTOMER_DATA c

  WHERE c.Customer_Code = inmkt. Distributor_Code)

  WHERE inmkt. DISTRIBUTOR_CODE IS NOT NULL;

  2 statements above are not equivalent.

  The UPDATE statement changes all the lines in the table mkt_data that have a distributor_code, this distributor_code be in the table customer_data or not.

  You want something that is equivalent to the MERGE statement, you can use:

  UPDATE MKT_DATA inmkt

  SET (inmkt. Distributor_Region, inmkt. Distributor_Province) =

  (SELECT c.Region, c.State

  OF CUSTOMER_DATA c

  WHERE c.Customer_Code = inmkt. Distributor_Code

  )

  WHERE THERE ARE

  (SELECT 1

  CUSTOMER_DATA C2

  WHERE the c2. Customer_Code = inmkt. Distributor_Code

  )

  ;

  It basically uses the same auxiliary request 2 times (article 2 (a), so I would use MERGE if these are the results I wanted.

  If you have a foreign key constraint, which ensures that each distributor_code in mkt_data will match a line in customer_data, then the 2 statements above will produce the same results.  In this case, I find the UPDATE statement simpler and probably use it rather than MERGE.

  2. to Updating huge amount of records MERGER must be used instead of update?

  I don't know of all short reign as the "use X whenever you have more than 100,000 lines".

  3. If in the update, I need to use several tables then I have to use MERGE?

  MERGE IN MKT_DATA2 t

  WITH THE HELP OF)

  SELECT DISTINCT srt. Sales_Id, tmkt. Cust_Code, srt. PRODUCT_CENTER

  OF srt, CUSTOMER_DATA c, MKT_DATA2 tmkt SALESTERR_PL

  WHERE tmkt.state_Id = 10423

  AND tmkt. Business = 'MARKETING'

  AND c.CUST_CODE = tmkt. Cust_Code

  AND c.Rollup_Code = srt. CUST_CODE

  AND srt. PRODUCT_CENTER = tmkt.PL

  ) d

  WE (t.state_Id = 10423

  AND t.BA = 'MARKETING'

  AND t.Cust_Code = d.Cust_Code

  AND t.PL = d.PRODUCT_CENTER

  AND t.Cust_Code IS NOT NULL

  )

  WHEN MATCHED THEN

  UPDATE SET t.Sales_Id = d.Sales_Id;

  UPDATE MKT_DATA2 tmkt

  SET Sales_Id = (SELECT SALES_ID OF SALESTERR_PL srt

  WHERE the srt. CUST_CODE = (SELECT ROLLUP_CODE FROM CUSTOMER_DATA c

  WHERE c.CUSTOMER_CODE = tmkt. Cust_Code)

  AND srt. PRODUCT_CENTER = tmkt.PL)

  WHERE business = 'MARKETING'

  AND state_Id = 10423;

  Once again, those who are not equivalent.  The UPDATE statement can change more lines than the MERGE statement.

  In addition, you can use the MERGE statement:

  MERGE IN MKT_DATA2 t

  WITH THE HELP OF)

  SELECT DISTINCT srt. Sales_Id, tmkt. Cust_Code, srt. PRODUCT_CENTER

  OF srt, CUSTOMER_DATA c, MKT_DATA2 tmkt SALESTERR_PL

  WHERE tmkt.state_Id = 10423

  AND tmkt. Business = 'MARKETING'

  AND c.CUST_CODE = tmkt. Cust_Code

  AND c.Rollup_Code = srt. CUST_CODE

  AND srt. PRODUCT_CENTER = tmkt.PL

  ) d

  WE (t.Cust_Code = d.Cust_Code

  AND t.PL = d.PRODUCT_CENTER

  )

  WHEN MATCHED THEN

  UPDATE SET t.Sales_Id = d.Sales_Id

  WHERE t.state_Id = 10423

  AND t.BA = 'MARKETING'

  - AND t.Cust_Code IS NOT NULL - does not need, said subquery 'c.CUST_CODE = tmkt. Cust_Code ".

  ;

  If you would care to publish the sample data, I was able to test this.

  4. when the UPDATE is preferred over the MERGER?

  In simple cases, including situations where all you need to know are on the line itself, such as:

  UPDATE emp

  SET sal = sal * 1.05

  Job WHERE NOT IN ('MANAGER', 'PRÉSIDENT')

  ;

• Kernel panic reproducible when using VMWare Fusion and Cisco VPN

  I can reliable reproduce a kernel panic when I use VMWare Fusion and Cisco VPN set.

  Using either done alone causes no problem.

  I'm on a mac book pro using the latest updates from Apple for Leopard.

  My question is: How can I report this to VMWare without having to pay for support?

  When I go to the VMWare fusion support page he wants me to pay for an incident.

  I really do not want to pay them to help solve a kernel panic.  (They pay me .)

  Announcing the details here (don't forget to join the panic.log as in HOWTO: ask (and answer) Questions) will work.

• Cache.get (Object) when using the list and Arrays.asList as keys

  Hello
  
  I saw a problem when doing the cache.get (object) with the list. Here's my test.
  
  NamedCache cohCache = CacheFactory.getCache ("Test");
  
  Key is a list
  Key list = new ArrayList();
  Key.Add ("A");
  
  cohCache.put (key, 1);
  
  System.out.println ("Get with Arrays.asList:" + cohCache.get (Arrays.asList ("A")));
  System.out.println ("list:" + cohCache.get (key));
  System.out.println ("list is equal to Arrays.asList:" + Arrays.asList("A").equals (key));
  
  Actual output:
  
  Get with Arrays.asList: null
  List is equal to Arrays.asList: true
  Download list: 1
  
  Expected results:
  
  Get with Arrays.asList: 1
  List is equal to Arrays.asList: true
  Download list: 1
  
  
  Arrays.asList("A") and the key are equal but consistency does not return the value. I thought that, in cache.get (object) consistency returns if object.equals (key) is true.
  
  Any idea?
  
  Reg
  
  Fatou.

  Dasun.Weerasinghe wrote:
  Hello

  I saw a problem when doing the cache.get (object) with the list. Here's my test.

  NamedCache cohCache = CacheFactory.getCache ("Test");

  Key is a list
  Key list = new ArrayList();
  Key.Add ("A");

  cohCache.put (key, 1);

  System.out.println ("Get with Arrays.asList:" + cohCache.get (Arrays.asList ("A")));
  System.out.println ("list:" + cohCache.get (key));
  System.out.println ("list is equal to Arrays.asList:" + Arrays.asList("A").equals (key));

  Actual output:

  Get with Arrays.asList: null
  List is equal to Arrays.asList: true
  Download list: 1

  Expected results:

  Get with Arrays.asList: 1
  List is equal to Arrays.asList: true
  Download list: 1

  Arrays.asList("A") and the key are equal but consistency does not return the value. I thought that, in cache.get (object) consistency returns if object.equals (key) is true.

  Any idea?

  Reg

  Fatou.

  Hi Eric,.

  There is a slight misunderstanding in how you think that the works of coherence.

  For clustered caches Coherence does not return the value of the object key of equals to the key specified when caching, object instead, it returns When serialized forms of the key used to and used to get equal to one another.

  If you use no POF, then most of the time Java serialization is used to serialize the objects of key, and in any case if you don't use of POF, and the name of the serialized object class is in the serialized form.

  Now, the thing is that the key that you put in is a java.util.ArrayList. The key that you have tried to get with is a java.util.Arrays.ArrayList.
  It's two different classes, so the serialized forms that store the name of class implementation (which is true in this case) cannot be the same. So consistency is not going to put initially entrance the key that it uses (the serialized form) is actually different from the original key, so there is no entry for the key used in the get() method, and correctly you get back null.

  On the other hand, the two implementations ArrayList implement equals as defined in AbstractList, requiring not only the types of implementation of lists be the same, they apply just that the relation to the object is also a list, so two lists containing the same elements in the same order are equal as long as equals() on AbstractList is concerned, that's why your equals() check evaluates to true even if the types of implementation are different.

  Best regards

  Robert

  Published by: robvarga on May 2, 2012 11:44

• Existing customers can continue to use their old code produced during the upgrade?

  Hi, I want to switch to CC, but I was wondering if I can still use my old CS5.5 software licensed once I have updated

  undeadAndroid,

  Yes you can continue using the previous version products like CC would not remove or touch the Activation of your old products.

  Kind regards

  Michael Sharma

• I can't software to use the old ScanJet with new Vista?

  Scanner flat Grand, the ScanJet 4200C. Used with my old HP Pavilion (running Win98SE!) for 12 years.

  Just a new Pavilion (a6200t) running Vista Home Basic and I would love to continue to use the ScanJet.

  Anyone know if/when can I get software/drivers to allow such use?

  Thanks in advance for any help.

  m lc

  You're not going to like it, but the answer is a resounding "NO".

  Drivers HP Vista - final details on the release of drivers for Vista HP

  It took some time, but HP finally released information about the drivers for Windows Vista. In summary, if your product is 'old' and a scanner (Scanjet), you can expect the following response:

  "We are sorry to inform you that there is no support for Windows Vista available for your HP product. Therefore, your product will not work with Windows Vista. The majority of HP products, not supported in Windows Vista are beyond seven years. If you use the Windows Vista operating system on your computer, please consider upgrading to a new HP product that is supported on Windows Vista. »

  Among the products affected by political driver Vista HP include popular ScanJet 3200c ScanJet 3300 and ScanJet 4200 c. HP has promised to release drivers for certain products. However, unless the product is - ish or has been designed with Vista in mind, the number of available functions is likey to be reduced.

  Source: http://www.softwarepatch.com/windows-vista-drivers/hp-windows-vista-drivers.html

  That said, you could spend hours searching the NET for 3rd party auto-run or drivers who could mimic what you need.

• Use the old charger with new T510 T61?

  I was wondering if I should buy a new charger or if I use an old I hang out.

  My T510 came with a 65 watt charger p / n: 42 T 4422

  Old T61 charger is a watt 90 p/n 92 p 1109

  Both are 20V and vrtually identical caps.

  I would just plug to see if it works, but I don't want to fry the battery.

  your T510 may use either 65 w, 90 w or Thinkpad 135 watt charger.