Help! "Create links to other articles" doesn't work is not on the final application

Similar Questions

• LR 5 doesn't work is not on the new Macbook Pro.

  LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

  Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

• USB doesn't work is not on the external hard drive

  I have Vista Ultimate and here I noticed recently USB not working only not on the external hard drive. I tried to update the drivers and the system responds with the most recent driver already installed. Verified the USB ROOT property and shows nothing when it comes to th Ext. HD but it sees the usb hub and head phones. An organization can help its driving me crazy!

  Hi Chaser07,

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  I suggest you try to use an external hard drive on another USB plug and check if it works.

  Method 2:

  Automatically diagnose and repair problems with the devices when the Device Manager does not detect your hardware, audio, USB, or other devices, or when your devices are disabled or does not.

  Click run now in the link below to diagnose and fix problems automatically.

  Hardware devices not detected or does not

  http://support.Microsoft.com/GP/hardware_device_problems

  Check whether the problem is resolved.

  Method 3:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Check whether the problem is resolved.

  Method 4:

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• HP Pavilion: Touchscreen doesn't work is not in the browser

  My touch screen stopped working specifically in Chrome.  It seems to work everywhere else, including IE.  It's probably a frame in Chrome or something on the computer settings I managed to accidentally change?  Thank you!

  Hi there @jexylou,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the chrome browser works only not with the touch screen. I'll be happy to help you.

  Open chrome

  Put this in the address bar: chrome://flags/#touch-events

  Change the setting "enable Touch events" "Automatic" to "Enable"

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Boolean converter doesn't work is not for the string data type

  Hi gurus,

  I am creating a Boolean converter based on the O/N value for column EO, but every time I select the checkbox that's throwing error "attribute with the value false precision/scale not valid."

  If I add PrecisionRule = 'false' for TestFlag to the EO, I had ORA-12899: value too large for column 'XX '. "" "" FDY_TEST '. "" TEST_FLAG' (real:, maximum of 5: 1).

  Seems that it is still store 'true' / 'false' char to instead "Y/N", even if the POS in the converter class return System.out.println ("getAsObject - value is Y")

  If I use the transitional attribute (TestFlagDummy) and change the EOImpl to TestFlagDummy getter and setter, it works very well.

  I was wondering why the converted does not, in which case the other converter for string I test to convert the value entered for upper case works very well.

  Appreciate any help.

  Definition EO

  ------------------

  < attribute

  Name = "TestFlag.

  Precision = '1 '.

  ColumnName = "TEST_FLAG."

  SQLType = 'VARCHAR '.

  Type = "Java.lang.String"

  ColumnType = "VARCHAR2".

  TableName = "FDY_TEST" >

  < DesignTime >

  < name Attr = "_DisplaySize" Value = "1" / >

  < / DesignTime >

  < / attribute >

  Converter class

  -----------------------

  public class YNConverter

  implements the converter, ClientConverter

  {

  public Object getAsObject (FacesContext facesContext, UIComponent uiComponent, String value)

  {

  If (true".equals (value)) {" "}

  System.out.println ("getAsObject - value is Y");

  }

  else {}

  System.out.println ("getAsObject - value is N");

  }

  return "" true ".equals (value)?". Y":"N";

  }

  public String getAsString (FacesContext facesContext, UIComponent uiComponent, Object value)

  {

  System.out.println ("getAsString - Value is" + value.toString ());

  Return "Y".equals (value.toString ())? "true": "false";

  }

  public String getClientLibrarySource (FacesContext facesContext)

  {

  Returns a null value.

  }

  public Collection < String > getClientImportNames()

  {

  Return Collections.emptySet ();

  }

  public String getClientScript (FacesContext facesContext, UIComponent uiComponent)

  {

  Returns a null value.

  }

  public String getClientConversion (FacesContext facesContext, UIComponent uiComponent)

  {

  Returns a null value.

  }

  }

  USER INTERFACE

  ---

  < af:selectBooleanCheckbox

  label = "#{bindings." TestFlag.label}"id ="sbc1.

  value = "#{bindings." TestFlag.inputValue}.

  Converter = autoSubmit "YNConverter" = "true" / >

  Kind regards

  Ferrere

  Your link should look like this:

  VO attribute similar to the following:

  and EO attribute similar to the following:

  Dario

• Option of 'Options' of the Smartphones from blackBerry in the BB Menu button doesn't work is not on the Torch 9800

  Whenever I select 'Options' from the drop of the BB Menu button on my Torch 9800, the screen flashes, then back to my home screen. It has been so for a long time (almost a year) and I think that there is a permission that has been disabled inadverdently. It does work if I use the theme BB6 native or other that I downloaded. Anyone know how to make 'Options' to the option to start working again?

  Hi randynjaimie,

  Try to back up your data using the BlackBerry® Desktop Software and perform a clean reload of your BlackBerry® Device Software.

  For more information, see the following article. How to perform a clean reload of the BlackBerry Device Software for Windows. www.BlackBerry.com/BTSC/kb11320
  Please test to make sure that the problem has been resolved before restoring all the data from your backup file.

  I hope this helps.

• sort order doesn't work is not in the library module

  Hi, I shoot events with 2 different cameras, using a pool to the other and back dozens of times switching.  When I come home, I import the maps of two cameras in Lightroom. In the library module, the small previews on the bottom sort by chronological order of capture OF the CAMERA.  meaning that it shows all the photos sorted by capture of the camera one time and then all the photos, sorted by the time form camera capture 2.  I have many, many would prefer if the form of photos, both sorted cameras sort by ABSOLUTE capture time, not a single camera, then another.  In the library module, select view/sort/capture time but it just doesn't work.  any help?

  Thank you

  Triple - make sure that the camera clocks have been set at the same period.

  The best way to do that is to display the date of capture under the thumbnails mode grid library. In the library, view > Display Options and set the low label or the top of the Compact cell Extras to capture Date/time. Then set View > grid view Style > Compact cells.

  Then view > sort > time capture. Look closely at the date/time under thumbnails and pay attention to the AM/PM (if you are in a country with 12-hour formats).  The date/time by strictly ascending order?

  If they are not strictly ascending, thanks for posting a screenshot of high resolution of your entire window of LR showing the problem.

• Console Proxy doesn't work is not behind the edge load balancer

  I have a strange problem. I set up a load balancer with vShield Edge. Behind the load balancer, I have two cells vCloud. The Web interface works very well for users, but trying to connect a VMRC to view remote screen it displays 'connection' and then the session is disconnected.

  Then I stop the first cell and users can establish a VMRC connection again. When I activate the first cell once again, the web interface continues to work, but not the proxy of the console. Then I stop the second cell and now elements of the console working again.

  Any tips?

  Gabrié

  Have a similar setup and had the same problem.  Two things to check.  Go to c:\users\\appdata\local\temp\vmware- and open the last file vmware-vmrc - xxxx.log.  Towards the end, it should tell you why it's a failure.  For me, it was a conflict of thumbprint SSL, dating back to the different SSL certificates on the cells.  Also, be sure to vCloud Director Administration-Public address you have the right audiences VCD console address specified. To resolve the inconsistency of my mark, I just created a file certificates.ks a cell and then copied on the other cell and reran the script configures.  Good luck with VMware to help.  I opened a folder for this issue 6 days ago and have yet to get any help!

  -Craig

• Photoshop CS6 brush pressure sensitivity doesn't work is not on the Microsoft Surface Pro.

  I just bought a Microsoft Surface Pro for Photoshop running on this subject.  I installed Photoshop and tried to make some sketches.  I created a new file and began sketching.  Immediately, I felt as if something was wrong.  I checked my brush settings and saw that the pressure sensitivity was not available.  Everytine I tried to put it on it was marked by an exclamation point.

  Does anyone know if Adobe supports new microsoft pressure sensitive pen, or if there is some sort of definition that I'm missing?  I tried sketchbook pro 2011, and that works surprisingly well with the pen.  I hope someone can help me along here, because if this tablet really can run photoshop, it would be a game changer.

  Microsoft is aware of this problem with their driver software.

  Many other applications (not just Adobe) are also affected.

• Touchscreen doesn't work is not for the Satellite U920t - 10 p

  Please read this completely before you answer with your copied and pasted answers.

  My touch screen lets you stop work, but was still attached with a reboot of the machine.
  Now it doesn't work at all and * I've tried everything posted elsewhere in this forum *.

  I tried to change the settings for battery power, try to update the drivers (not exactly who is right though!).

  Please can anyone help because it is a new machine and it's very frustrating.

  Serial number: 7D054633H
  Model: Toshiba Satellite U920t - PSUL1E-01900JEN 10 p

  Thanks in advance.

  > Please read this completely before you answer with your copied and pasted answers.
  IMHO, I n t think that someone here in the forum doesn t read the messages before playback
  I hope that this part of your post is just the result of frustration due to the malfunction of the notebook...

  Back to your question:
  > I tried everything already posted elsewhere in this forum.
  and what does this mean? What have you tried exactly?
  Have you given zero and plant control panel?

  If not try and in the case where this help not the laptop's hardware could be affected which requires new checks of material by an authorized

• right shoulder button doesn't work is not on the gamepad xbox on pc XP

  Hello
  I have a joystick type xbox 360 connected to my pc and the right shoulder button does not work when you play Rainbow 6 Vegas 2.  Initially it would not work so I changed the ID & as recommended numbers on a forum, I visited. Now, all controls work except the right shoulder button. The file that I modified is shown below.  Any help much appreciated.
  concerning
  Pete

  [Joystick2]
  ProductName = gamepad Xbox HID minidriver
  VendorID = 5168
  ProductID = 63489
  Joy1 = XboxTypeS_A
  Joy2 = XboxTypeS_B
  Joy3 = XboxTypeS_X
  Joy4 = XboxTypeS_Y
  Joy5 = XboxTypeS_RightShoulder
  Joy6 = XboxTypeS_LeftShoulder
  Joy7 = XboxTypeS_Start
  Joy8 = XboxTypeS_Back
  Joy9 = XboxTypeS_LeftThumbstick
  Joy10 = XboxTypeS_RightThumbstick
  Joy11 =
  Joy12 =
  Joy13 =
  Joy14 =
  Joy15 =
  Joy16 =
  Axis_X = XboxTypeS_LeftX
  Axis_Y = XboxTypeS_LeftY
  Axis_Z = XboxTypeS_LeftTrigger
  Axis_Rotation_X = XboxTypeS_RightX
  Axis_Rotation_Y = XboxTypeS_RightY
  Axis_Rotation_Z = XboxTypeS_RightTrigger
  Slider_0 =
  Slider_1 =
  DPadUp = XboxTypeS_DPad_Up
  DPadDown = XboxTypeS_DPad_Down
  DPadLeft = XboxTypeS_DPad_Left
  DPadRight = XboxTypeS_DPad_Right

  Hello

  The question you have posted is related to the Xbox 360 controller.  Please visit the link below to find a community that will offer in support of your application.

  XBOX support:
  http://support.Xbox.com/en-us/Xbox-360/get-started/home?XR=shellnav

  Reference: http://support.Xbox.com/en-us/Xbox-360/accessories/controllers-remotes#1af1420135ff4637ab4f495f75a145b8

  Hope this information is useful.

• Photosmart HP 6520 all-in-one: Photosmart HP 6520 Scan to computer function doesn't work is not after the driver download

  After that our latest operating system updated, our HP Photosmart 6520 had scanning problems.  Usually a reboot or as part of the scan on the HP computer would work.  Today, I downloaded the latest driver in the hope that could solve the problem.  Now the scanner is not recognize the computer, and I can't enable analysis of the it function with HP on my Mac utility.  The print feature works very well.   This message I see in the HP utility:

  "The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »

  I searched HP website, but I can't find anything other than the driver I downloaded for Mac OS X 10.10.

  What can I do to get my scanner up and running again?  Thank you very much for your help!

  Hi @kjnowicki

  I want to help you with your scanning device.

  We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Flash doesn't work is not in the Web site

  I'm new to Flash and created a film, tested in Flash, put it in the htm, he played in Dreamweaver, it plays in the browser (F12), but when I upload it to our Web site, there is nothing. I have attached the file. What I am doing wrong? TIA Rush

  Yes, the scripts file is there, in the Flash directory, as well as the flash

  files, is it ok?

  # This is not where the link wants to find.  The link points to the Scripts folder, not the Flash folder.  Correct the link or download the file to the correct location.

  Tell me why you don't like the choice.

  Read the link I have included and you will know.

• IPhone 6s off right speaker doesn't work is not on the helmet

  IPhone 6s off right speaker doesn't work don't not on the helmet, tried 3 different sets of headphones, have tried to clean shooting, reloading the OS etc., checked the slider etc, still no joy, any suggestions very welcome. It works on both speakers if I don't push the CAP fully home (but he then falls easily).

  Are you sure that you're pushing all the way?  If you are, this looks like a connector damaged in the phone. As a 6 s that it is still under warranty, then take it to an Apple store.

• Find the base of Object.vi doesn't work is not in the picture 3D Solidworks Import control

  Hello

  I try to import the Solidworks model, I get the whole Assembly in 3D image image but when I try to find the particular help object to find object.vi It gives me

  Error 1 ganglion invoke in NI_3D photo Control.lvlib:Find Object.vi-> VRMLviewer.vi

  
  

  Possible reasons:
  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: Command requires GPIB controller charge controller.

  Is there a specific way to be part of Solidworks or wjat could be the possible reason.

  Thanks in advance.

  Although you probably have names on your model, your VRML (.wrl) file does not work. If you try to open the file with a text editor, you can fix this by adding the following statement before processing:

  Basis of DEF transform {}

  This will allow you to access the location of the VI to find. The error is because LabVIEW has not found the name in your VRML.