Photoshop CS6 brush pressure sensitivity doesn't work is not on the Microsoft Surface Pro.

Similar Questions

• LR 5 doesn't work is not on the new Macbook Pro.

  LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

  Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

• Photoshop CS6 save for Web doesn't work do not

  I use photoshop CS6 (cloud) on Mac (10.7.5) and when I use the save for Web > save, I got the following popup:

  -Adobe save for Web error-

  Unable to complete this operation. An unknown operating system error has occurred.

  

  I've been using CS6 for months and it worked fine yesterday before closing did. Today morning to start it did not work more.

  I tried uninstalled and reinstalled photoshop, erase my presets, shut down/start, drive repair, repair permissions, without success.

  The backup levels of web service always works in CS5.

  Any help will be appreciated,

  Raphaël K.

  Hi RaphDuBus and thanks again;  I was able to solve the problem, in my view, completely.  The explanation is long, and I just included it in the thread at http://forums.adobe.com/message/5242626.  Gasoline seems to have been in the actual permissions manually (via Get Info) on the folder (the whole folder) to the user/Library/preferences.  I have no explanation of how they may have changed;  they have been changed in the CS6 download / update processes, perhaps because of a certain inconsistency 10.5, or that they had been changed earlier, and for some reason any did not prevent the save for Web working in CS5.5.  More details are in the thread referenced above.  Thank you!

  I would add that the second problem related to the error message that appear on Photoshop (a message about not being able to save the preferences file) to quit smoking was also fixed.  It makes sense, both the Photoshop preferences and levels of preferences Web backup are included in the folder that was apparently the issue.

• the Wacom tablet pressure sensitivity doesn't work anymore

  I have a Tablet Wacom Intuos 3, photoshop CS6 and Windows 7.  I have no idea why, but my Tablet pressure sensitivity doesn't work anymore.  I did a google search to see if others had the same problem on a forum (I can't remember where) I found a solution that seems to have worked for many, so I tried which...  Basically, it says to uninstall my wacom driver, unplug the Tablet, reboot, install driver, plug the Tablet and reset my preferences in photoshop.  I did it last night and it worked, I was very happy, but it was late, was exhausted, so I turned off my computer and went to bed.  When I have it turned on and is gone in photoshop this morning, it does more, pressure sensitivity is gone again.  I get this warning in my brush settings when I try to put it on pen pressure, angle or another setting requiring sensitivity to pressure, but it does not tell me how to fix it.  Is the only way I can make the process work I mentionned (pilot program is uninstalled, disconnect the Tablet, reboot etc.) but I would need to do whenever I have shut down my computer and it's a bit of a pain...  I have also tried installing different drivers, the last being first of all, when this does not work I tried older to see if that would make a difference without success...

  Any help would be greatly appreciated!  I'm starting to feel a little desperate...

  I read your post and found nothing which contradicts my statements.  But we looked at these questions several times - and this kind of problem is due to the driver or hardware.

  Yes, if you do not know the code or API involved, you may jump to the wrong conclusions.

  But I know what all is involved (and the fact that Adobe applications share not compressed code) and have sat and debugged these questions several times that I can remember.

  Please follow with Wacom to determine the problem with your drivers or tablet.

• HP Pavilion: Touchscreen doesn't work is not in the browser

  My touch screen stopped working specifically in Chrome.  It seems to work everywhere else, including IE.  It's probably a frame in Chrome or something on the computer settings I managed to accidentally change?  Thank you!

  Hi there @jexylou,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the chrome browser works only not with the touch screen. I'll be happy to help you.

  Open chrome

  Put this in the address bar: chrome://flags/#touch-events

  Change the setting "enable Touch events" "Automatic" to "Enable"

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• USB doesn't work is not on the external hard drive

  I have Vista Ultimate and here I noticed recently USB not working only not on the external hard drive. I tried to update the drivers and the system responds with the most recent driver already installed. Verified the USB ROOT property and shows nothing when it comes to th Ext. HD but it sees the usb hub and head phones. An organization can help its driving me crazy!

  Hi Chaser07,

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  I suggest you try to use an external hard drive on another USB plug and check if it works.

  Method 2:

  Automatically diagnose and repair problems with the devices when the Device Manager does not detect your hardware, audio, USB, or other devices, or when your devices are disabled or does not.

  Click run now in the link below to diagnose and fix problems automatically.

  Hardware devices not detected or does not

  http://support.Microsoft.com/GP/hardware_device_problems

  Check whether the problem is resolved.

  Method 3:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Check whether the problem is resolved.

  Method 4:

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Design the Standard CS6 Suite doesn't work is not on the new iMac

  I just bought the new iMac 27 ". Good looking! I've updated the OS 10.8.2 I ran that Installer DSStandard CS6 and whatever else it took place without a hitch. When I try to start anything but Acrobat, before unexpectedly programs I have not even the boot screen. I have repaired permissions.

  Any suggestions as to what I'm doing wrong?

  Yes, this occurs when users try to copy it to the applications using Time Machine or the Migration Wizard.

  Please remove the software using the uninstaller programs located in Applications/Utilities/Adobe Installers.  After that it's over, you want to follow up with enforcement of the CS cleanup tool.  You can find the details of its use in the cleaning of CS for Setup issues tool | CCM, CS6, CS5.5, CS5, CS4, CS3 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

  Once you have completely removed software, then please reinstall from your installation media.  If you have further difficulties then please format the drive and only restore your documents and settings.  You will have more success to install with a clean drive.

• Touchscreen doesn't work is not for the Satellite U920t - 10 p

  Please read this completely before you answer with your copied and pasted answers.

  My touch screen lets you stop work, but was still attached with a reboot of the machine.
  Now it doesn't work at all and * I've tried everything posted elsewhere in this forum *.

  I tried to change the settings for battery power, try to update the drivers (not exactly who is right though!).

  Please can anyone help because it is a new machine and it's very frustrating.

  Serial number: 7D054633H
  Model: Toshiba Satellite U920t - PSUL1E-01900JEN 10 p

  Thanks in advance.

  > Please read this completely before you answer with your copied and pasted answers.
  IMHO, I n t think that someone here in the forum doesn t read the messages before playback
  I hope that this part of your post is just the result of frustration due to the malfunction of the notebook...

  Back to your question:
  > I tried everything already posted elsewhere in this forum.
  and what does this mean? What have you tried exactly?
  Have you given zero and plant control panel?

  If not try and in the case where this help not the laptop's hardware could be affected which requires new checks of material by an authorized

• IPhone 6s off right speaker doesn't work is not on the helmet

  IPhone 6s off right speaker doesn't work don't not on the helmet, tried 3 different sets of headphones, have tried to clean shooting, reloading the OS etc., checked the slider etc, still no joy, any suggestions very welcome. It works on both speakers if I don't push the CAP fully home (but he then falls easily).

  Are you sure that you're pushing all the way?  If you are, this looks like a connector damaged in the phone. As a 6 s that it is still under warranty, then take it to an Apple store.

• sort order doesn't work is not in the library module

  Hi, I shoot events with 2 different cameras, using a pool to the other and back dozens of times switching.  When I come home, I import the maps of two cameras in Lightroom. In the library module, the small previews on the bottom sort by chronological order of capture OF the CAMERA.  meaning that it shows all the photos sorted by capture of the camera one time and then all the photos, sorted by the time form camera capture 2.  I have many, many would prefer if the form of photos, both sorted cameras sort by ABSOLUTE capture time, not a single camera, then another.  In the library module, select view/sort/capture time but it just doesn't work.  any help?

  Thank you

  Triple - make sure that the camera clocks have been set at the same period.

  The best way to do that is to display the date of capture under the thumbnails mode grid library. In the library, view > Display Options and set the low label or the top of the Compact cell Extras to capture Date/time. Then set View > grid view Style > Compact cells.

  Then view > sort > time capture. Look closely at the date/time under thumbnails and pay attention to the AM/PM (if you are in a country with 12-hour formats).  The date/time by strictly ascending order?

  If they are not strictly ascending, thanks for posting a screenshot of high resolution of your entire window of LR showing the problem.

• AutoScroll doesn't work only not with the Wacom Tablet

  I had problems with a Wacom Intuos 4 with Photoshop CC.

  using Windows 7.

  I have uninstall the Wacom drivers and reinstalled. everything works well EXCEPT:

  cannot auto zoom and scroll with the touch ring.

  Seen a comment that if you change the medium to fast speed it resolves, but it didn't for me.

  Wacom said not their problem.

  any help would be appreciated. Thank you!

  Hi blake,.

  I've updated to the same today for an intuos wacom drivers 4 on a windows7 pc and experienced the same issues.  zoom features do not work after installation.  My current workaround is to manually set the option of high touch ring - the default autoscroll/zoom - like this:

  

  (1) choose 'hits... ". "instead of scrolling auto/zoom or zoom even

  (2) in the box 'set the strikes' enter by default photoshop for zoom shortcut keys (ctrl +), which can appear as ' {ctrl} =' and zoom out (ctrl) - after typing the.

  I can confirm that allows the zoom to work for me in version ch cc 2015.1.1 (20151209 r 327 x 64), I think this is the latest version as of today.  It is not as accurate as the wacom zoom used to be, because it has predefined interval of zoom factors, but at least it works.  I scroll the mouse so I apologize to not have a work around for this.  hope that gives you temporary workaround for the problem of zoom, at least.

  Good luck!

  oneguey

• If doesn't work is not inside the loop for the registration of the declaration file?

  Hello!

  I have the following documents open in Photoshop:

  123456_mrp_ou. TIF

  869548_mrp_ou. TIF

  896589_mrp_in. TIF

  896589_mrp_ou. TIF

  .. and I have this if statement in a loop for to search for files with a specific 'pid' number and save them in the folder My Documents:

  var originalPid = 896589
  for(i = 0; i < app.documents.length ; i ++) {
        activeDocument = app.documents[i]
          if(activeDocument.name.substring(0,6) === originalPid) {
                  var standardSave = new File('/Users/constantincerdan/Documents/' + activeDocument.name)
                  activeDocument.saveAs(standardSave, TiffSaveOptions, false, Extension.LOWERCASE)
  }
  }
  
  
  

  It did not find the two files and save them when I run. However, the loop without if statement runs very well and saves all the documents in the Documents folder:

  var originalPid = 896589
  for(i = 0; i < app.documents.length ; i ++) {
        activeDocument = app.documents[i]
                  var standardSave = new File('/Users/constantincerdan/Documents/' + activeDocument.name)
                  activeDocument.saveAs(standardSave, TiffSaveOptions, false, Extension.LOWERCASE)
  }
  
  
  

  How it works with an if statement so that it saves only the two?

  Any help is very appreciated!

  You are comparing apples to oranges, you need to compare strings.

  originalPid = 896589;

  alert (typeof originalPid);

• Windows product key doesn't work is not for the reinstallation of Windows 7

  So my Lenovo (B560) became super slow and I want to wipe the hard drive and reinstall Windows 7. But when I looked on the Microsoft Web site and tried to check my key I received the following message is displayed:

  "The product key you have entered seems to be the software that was preinstalled by the manufacturer of the device. Contact the manufacturer of the device for software recovery options.

  The product key that I used was the COA sticker under the laptop which was indeed different from one I receovered from the register. In any case, I tried both and none worked.

  Ideas for how can I proceed?

  You must install OEM Lenovo recovery disks or a recovery partition to use the key.

• Find the base of Object.vi doesn't work is not in the picture 3D Solidworks Import control

  Hello

  I try to import the Solidworks model, I get the whole Assembly in 3D image image but when I try to find the particular help object to find object.vi It gives me

  Error 1 ganglion invoke in NI_3D photo Control.lvlib:Find Object.vi-> VRMLviewer.vi

  
  

  Possible reasons:
  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: Command requires GPIB controller charge controller.

  Is there a specific way to be part of Solidworks or wjat could be the possible reason.

  Thanks in advance.

  Although you probably have names on your model, your VRML (.wrl) file does not work. If you try to open the file with a text editor, you can fix this by adding the following statement before processing:

  Basis of DEF transform {}

  This will allow you to access the location of the VI to find. The error is because LabVIEW has not found the name in your VRML.

• Divide the keyboard doesn't work is not on the Horizon

  Hi there: just received yesterday an Ideacentre Horizon (27 inches). I am wanting to use the virtual keyboard in shared mode, however there is no split option appear. I see two keyboards, as well as the opinion of handwriting, but not the keyboard split option. How can I make this work?

  The Horizon is propped upward, in landscape mode.

  Thank you!

  OK, what operating system are you using, win 8 or 8.1?

  In the bar of charms > settings > keyboard, you use ENG English (United States) US keyboard?

  Here's a video of MS on 'how to use the touchpad.

  http://Windows.Microsoft.com/en-us/Windows-8/using-touch-keyboard

  If you do not use the keyboard ENG (US), see "how to add a keyboard configuration '.

  http://Windows.Microsoft.com/en-us/Windows-8/change-keyboard-layout

  See you soon

  DragonRider