Help! Export problems

Similar Questions

• Card memory blackBerry Smartphones can help with problem memory curve?

  I had (apparently common on this forum) problems with memory on my blackberry curve 8310.  I use Missing Sync MarkSpace software to synchronize with my macbook.  The software works very well, but he has to use too much memory.  I added a memory card hoping that it would help this problem... but the map does not appear to be used.  I have no more than two or three rings and a few photos.  I think that the software and my contacts/calendar to take up space.  I can't load this kind of applications or data on the card?  How? Is it possible to increase the memory that works?

  No, you cannot load or run the press card applications.

  What you can do:

  Read this: http://www.blackberryforums.com/general-blackberry-discussion/116396-managing-your-bb-memory-lost-ca...

  And this: http://www.blackberryforums.com/general-blackberry-discussion/112029-losing-call-logs-sms-emails-opt...

  Other links to read:
  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB15345&sliceId=SAL_Pub...
  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB14320&sliceId=SAL_Pub...
  http://www.BlackBerry.com/BTSC/dynamickc.do?externalId=KB14213&sliceId=SAL_Public&command=show&forwa...

• Help! Problem exporting in Adobe Premiere & Media Encoder

  Hi guys,.

  I have a problem for which I do not find any solution on the web. I'm not a very experienced user of Premiere Pro. Maybe you can help me!

  I did a project using Adobe Premiere Pro.

  There is only a single sequence, but I have several clips that I want to export in this order as separate videos (see video 1, video 2, video 3 in the picture)

  

  The problem is that when I open Adobe Media Encoder, I opened the sequence and I export all the different clips, exported videos don't keep all the effects that I applied to the video (contrast and brightness, other adjustments of different image settings / effects etc.).

  So, I can automatically export all videos with Media Encoder, but with no correction of color or other adjustments. When I play the first sequence, everything looks good. When I export videos using Media Encoder, they have not all applied effects.

  If I export the sequence directly in first as a long video, it keeps the effects, but I get only a single video, and I need all export them separately.

  The only way it works is different sequences manually and export all of them at once. But I've got 200 of them. So it will take a lifetime

  I guess there is a smarter way to do it.

  Happened to you? Is this something that I'm not just doing?

  What should I do to keep all the effects that I apply when exporting Media Encoder?

  Is there another method I could use to correctly export all 200 videos in this order in addition to do it manually?

  Thank you!

  Are - what you happened to select items in the project Panel in Premiere Pro and SOUL queue?  You can export a timeline properly (select a timeline > menuFichier > export > media > Click 'Tail')?  The effects are only applied on the mounting elements, not media clip in the project Panel.

• Help please problem with export

  I had some problems with safari on my imac (OS X), so I did "repairs" I finally remove some keychains and I think that's what's causing the problem I have. However I don't know how to fix it.

  When I try to export my rugged external hard drive from Lacie desktop RAW images to jpg I get this error...

  "An internal error has occurred:?: 0: attempt to index field 'rootFile' (a nil value)".

  I have a deadline soon (in an hour) and need help please.

  Hi Neo,

  I try to export the Cie and go to the Office first... we will know how you go, I'll be around an hour or two!

• Speech recognition Profile Import Export problem

  I have problems to import a profile that I put in place.  I'm upgrading my hard drives often, so I'm always import and export of different profiles.  I have run the little program "Speech Profile Manager" and I export my profile (by default and only one), but when I go on the new computer, same version of vista and everything, I get huge errors and it does not matter.  This is how it goes down:

  I have not a single program open, just after a clean boot:

  1. I run the speech profile manager

  2. I click on "Import", I find the file to import and say OPEN.

  3. it is said so "do you wish the profile imported by default?"  I click Yes

  Image here: http://tagr.org/images/Default_Profile.jpg

  4. He said to them 'the microphone settings must be granted before use... You want to now? "I click Yes.

  Speech at startup and then switch to sleep mode and that this error pops up:

  WARNING: Engine target () of the profile is not available.

  Profile data has been imported, but won't work for the missing engine.  If you install the engine at a later date, please fun the microphone Wizard.

  And then 1 million errors is the first:

  "ERROR: cannot create (Files\1033\L1033.tpc) key in the registry." Please make sure that the speech is installed and that no programs that use speech (for example) are open, and then try again.

  Image here: http://tagr.org/images/Yes_To_Mic_Wizard.jpg

  If I say no the Microphone Wizard, I get an another huge list of errors, but a different number:

  "ERROR: cannot create the key (Files\TrainingAudio-0409-10C902C1-A71A1D60) in the registry." Please make sure that the speech is installed and that no programs that use speech (for example) are open, and then try again.

  Image here: http://tagr.org/images/No_To_Mic_Wizard.jpg

  I don't even have office on this computer.  Profile is certainly not the profile, I spent months tweaking. It's a blank profile.

  I tried Yes and no on each option, micro USB plugged out, jack mic 1/8 '' plugged in, I tired it work on 3 different Installations of Vista. I tried to re - export profile several times. I get a similar set of mistakes every time.

  Help!

  The software that you are using was built in fact older versions of Windows and is not listed as compatible with Windows Vista. I apologize because I was under the impression that you imported files to an old Windows XP system running the Tablet PC edition or Office 2003 because the error indicating "target engine () of the profile is not available." and the use of the older tool. Resource: speech recognition Profile Manager tool

  Speech recognition Profile Manager tool is now obsolete, because vocal training files can now be migrated using the Easy Transfer Wizard. The wizard is available for Windows XP via download and integrated in all Installations of Windows Vista.

  To transfer voice (including the training files) user profile settings, please perform the following steps:

  -Click on the ORB start and type EASY in the search bar, click Windows Easy Transfer icon that appears - this will launch the wizard:

  

  -Click Next - select start a new transfer
  -Choose my old computer
  -Choose to use a CD, DVD, or other removable media (even to memorize the settings on the local hard disk)
  -Select the external hard drive or to a network location (even memorize settings on the local hard disk)

  

  -Under Choose a network location, you can use the parameter to copy the files to your local hard drive by default:

  

  -Choose any user account or my user account
  -If you make a transfer from one account to another on the same computer or on a single account on another computer, then you choose the my account of yser option

  -Choose advanced options will give you the choice to transfer only specific items in your account
  -You can use this for example to transfer only files sounds and speech recognition and clear all other check boxes
  -Once your choice, click on the wizard checks to see what items are able to transfer
  -At this point, you will notice that all the items that are selected to be transferred, by default all data application, Documents, items of office and preferences, Internet Explorer, and Windows settings are selected whose sounds and speech recognition:

  
   
  -Here you can choose again customize to select specific items you would like to be transferred after clicking on the transfer of your objects will be stored at the selected location

  -To import all items to another profile on the same computer or on another computer, you will need to re-run the wizard and select a current transfer and a new computer, and then point to the location of the files previously exported.

• export problems

  Hey guys, I must first say please don't mind my typing. Continuing... I was working on my youtube channel art. When I downloaded the image, the size was not quite right. so I went back and changed. When I clicked on "export to" and when the menu is popped up. I accidentally moved the "px" to the left. and, in doing so, whenever I change the "width/height" another changed by itself, for example, if I had to put 800 width, the height would like height of 1260. his extremely annoying and its starting to drive me crazy. as I have tried to fix this for 4 hours now. not youtube or internet helped me to solve this stupid problem. now it's maybe just me, but you don't blame me. I had photoshop 10 hours ago. I know only enough to creat. do not export or anything like that. If someone can type just 'step by step' how can I possibly fix this or replace where can I change the width without changing height, it would make my day. Thank you.

  You do cela the wrong John. Export as is an end of workflow option designed to be the last thing you do with your image. Image resizing works by changing the dimensions evenly. If this were not the case the image would be stretched or compressed and generally distorted. Try to make this way instead

  (1) duplicate your image

  

  (2) a dialog box opens to allow you to name the duplicate

  

  3) press ctrl-s or s on the keyboard command to save the duplicate.

  Doing this means duplicate you can change without affecting the original

  (4) now resize the duplicate image

  

  (5) in the dialog box, you should disable uniform resizing. Just click on the marked symbol and it then you will change the independent width height

  

  If you do not click the icon it will look like below with a chart showing there is a link between the size and the width changes in proportion to the height.

  

  If you go now to the export as dialog, you can export to the format you set. Perhaps in a future version of export as Adobe will integrate this small icon above.

• Quality image after export problem

  Hello

  I have a problem of quality after the export of the image. for example in one case, I make a modification, especially at the level of sharpness of an image, after when I exported the JPEG image, there is a large drop in sharpness and more noise.

  Knowing that the adjustment of export level everything is good in quality years 100% and type pour inking of high office.

  NT: the quality of the Exported JPEG image is the same as the quality of the image in the library and not in development tab.

  Thank you

  There are several problems with your settings. The detail panel sharpening (NET ') and the noise reduction controls should only be paid in Zoom 1:1 Mode. The amount of sharpness (Gain), detail, brightness and contrast are too high. Adjustment brush sharpening (NET ') setting 100 is compensated by the noise of 100 (noise), so little local sharpening is applied. Also the moire ' and fringe 100 parameters must both be left at 0 (OFF), because they serve no purpose for the sharpening of the premises. Please try the settings below and evaluate the results in development and library modules View Zoom 1:1. If having the same problem please download the raw export to DNG on Dropbox or other image file sharing site files and I'll try to decide the issue.

  For more help and tutorials in French please look on this link: training for Lightroom, assistance and support. Adobe Photoshop Lightroom 5

  

  

• Help-exporter

  So I have a problem to the premier CC pro, because I can't export.  Under file, then press the export button is gray and I can't click on it.  So I looked for an answer everyone says click on the Panel or the share menu, but they do not tell where he is, and I honestly can't find it, any help please?

  You (something) in your selected timeline, so that the export process knows THAT you want to export?

• VERY URGENT - export problem

  Hey guys I have a big problem. Today, I put a DVD. I have for this 12 GB of MP4 files high resolution, and I created a Menu with Adobe Encore. I want to burn on a DVD-9 (single layer) - this is why I chose to export an image with the defined size of 8 GB - now that I export the video it has bad quality - CAN YOU PLEASE HELP ME? It is for a customer. Thank you very much

  I want to burn on a DVD-9 (single layer)

  DVD - 9 is one face; double layer. It's called a size 8.5 Gig, but the real GiB is 7.95. You will have a "layer break" with the DVD-9.

  Your HD files cannot be created directly on a DVD. Size of the DVD is SD (standard definition) If your, for example, 1920 x 1080 will be downrezzed to 720 x 480. As says John, according to the length (in time) of the videos, you then set the compression to make it fit. So you have to judge the effect of the downrezzing, as well as compression.

  If you want HD quality, you must go to Blu - ray, not DVD.

• PLEASE HELP STILL PROBLEM

  Hello guys

  I have a big problem which has already weeks and I can't solve. I want a bluray disc. I did a project in first Pro CC. A video project that takes almost 2 hours. I marked all the chapters and I exported. I also created my whole menu in photoshop. So I opened the CALLBACK to get the BLURAY. I did all of the correct procedure. Burned to a disc. The project works very well. The problem is when I put ALL PLAY and I want to jump the line, the function does not work. IE the video runs faster, but it does not track jump to another. I made 25 tracks. I can't jump from the track to another track. What I would do. Please help me. I provide this project today.

  
  

  
  

  Thank you

  
  

  Julio
  

  
  

  
  

  There are chapters on your timeline yet? Is the timeline of an entire video?

• Premiere Pro export problems

  I had problems to export from Premiere Pro with my MacBook Pro with OSX 10.9. My exports fell by executives, sometimes black, sometimes green, sometimes with stripes or patterns of mosaic... I tried to update, I tried installing and reinstalling. I tried to export HD 25 p but I also tried to export settings of sequence and that no longer works. I also tried to use Media Encoder. My original film was HDV. Initially, I was working from an external drive WD with FW800 adapter thunderbolt, but I also tried working from an external drive USB3 and also from my internal drive. It makes no difference. The only 'solution' that I found for the problem was when I exported using a friend's computer.

  Before this problem I used Premiere Pro CS6 version because it was compatible with the editing suites I used at my University. But my project developed file some sort of bug whereby it widened almost exponentially whenever he saved. So it became so big (up to 5 GB) that the computer crashed whenever he tried to auto-save. When I converted the project to a CC project that seemed to overcome this problem, so I continued to work with CC of my lap - top. But then I had problems when I first came to export.

  Hello

  Please launch the first pro and click the option to file on the part superior of the Menu and go into project settings

  File > project settings > General > Renderer

  Change the rendering engine for the reading Mercury (CUDA) engine.

  If you do not get the CUDA option in the drop down menu then quit first pro and install the CUDA drivers from the link below

  6.5.18 NVIDIA DRIVERS

  Now launch Premiere pro and select CUDA.

  It will ask you to remove ads sequences, please do and try to export.

  hope that helps.

  Thank you

  Mohd Naseem.

• Helps Export-CSV

  $vms = Get-VM -rental "somehost"

  foreach

  ($vm in $vms){

  $vmobj_hds = $vm. Hard drives

  foreach ($vmhd in $vmobj_hds){

  Write-Host $vm. Name, $vmhd. File name}

  }

  I need to change that to Write-Host to Export-CSV with the following titles, the name of VM, HardDisk2 1 hard disk, etc. 1 hard disk should be the. HarDisk.Filename info. I've always had problems with the select - export-csv cmdlets and property. Any help would be appreciated.

  Hello BrianGordon84-

  Try something like:

  ## get the VMs, sort descending by number of harddisksGet-VM | Sort @{e={($_.ExtensionData.Config.Hardware.Device | ?{$_ -is [VMware.Vim.VirtualDisk]}).count}} -Descending | %{    $vm = $_    ## make an object in which to put the info    $oInfo = New-Object -Type PSObject -Property @{VMname = $vm.Name}    ## for each harddisk, add a property to the info object with the harddisk name and filename    Get-HardDisk -VM $vm | %{        $oInfo | Add-Member -MemberType NoteProperty -Name $_.Name -Value $_.Filename    } ## end foreach-object    ## return the info object    $oInfo} | Export-Csv -NoTypeInfo C:\temp\vmDiskInfo.csv
  

  Sorting after the Get - VM is there to ensure that the first exported object has most of the hard drives, which is what makes the exported CSV have the right number of columns.  The headers in the CSV file are made based on the first object out.

  The code could be optimized a bit by using Get - view, but your question was about the Export-Csv.

  How do I?

• Help? Problem recording in IDML - content reformats

  I have a document to a client that uses some version of InDesign predates creative cloud.

  I made an update of the document, they can not open. The previous version was created in CS6, which worked well.

  Then... I opened the file in CC 9.2.1 - it contains Japanese characters using the font Kozuka Gothic Pro.

  Chose save as and choose IDML (also tried exporting to IDML earlier).

  Open the IDML file and the content is moved upward in the document. for example, there was a gap of 3mm between a graph of the position and the text that followed it. The text climbed just flush the graph. The rest of the text on the page was also moved to the top, coming to overlap a table.

  I did not have this problem in the past when exporting to idml CS6. Is there something I need to do?

  Note: I also tried to select all of the text and help text, and then exported to idml. Same question. All the indicated text climbed onto the page.

  Any ideas would be greatly appreciated - I asked the client to tell me what version they are using, but didn't hear back until tomorrow. As it is the kind of emergency, I may convince Adobe to sort of let me have a trial version of CS6 so that I can make the change. (I had the test before, so can not install again.)

  Thank you!

  As it is the kind of emergency, I may convince Adobe to sort of let me have a trial version of CS6 so that I can make the change. (I had the test before, so can not install again.)

  If you have adobe cc subscribe you can download and install cc of indesign and cs6

  Download InDesign CS6 CC

  http://forums.Adobe.com/message/5485418#5485418

• Export problems: no image no 900 points

  Using Win7 64 bit, Lightroom 4.1... When I export an image I want to upload to a Web site, I get an error during the download of the image, I am downloading doesn't seem to be at least 900 pixels on the longest side.  Which is not true, they are STILL more than 900 pixels on the long side.  I tried many different settings of export and nothing seems to change this result.  Not even export to 900 each direction and 72 dpi.  Someone at - it ideas?  I'm puzzled.  I'm new to Lightroom, but I went through several tutorials and I do exactly what they say to do, but not joy.  Help, please?

  timbutler54 wrote:

  Confirmed by looking at the size of the image and both the long side and the short side exceeded 900.

  I mean, what software you said the long side and short was superior to 900? What number do you see, tell me one example for a single exported photo, the exact number of pixels in each direction that have seen you.

  If you see numbers in excess of 900, so this isn't a Lightroom problem, the problem is with the software download

• First CS 5.5 - audio export problem

  I'm running a weird problem today.

  I have a few projects and am made quicktime.

  I am able to make all projects, but in one, the audio just does not get to export.

  I also tried to copy the sequence and paste it into a new project.

  Nothing helps. I'm on a schedule very tight n - would appreciate help.

  Thank you.

  Dez

  After trying many different things - creating new projects, new sequences, eliminating an asset both to find if the problem was in assets items, empty cache, unchecking the XMP writing when the file is imported box in preferences/media - I was finally able to make the video + audio successfully as a project. I think the problem was with two audio files. Here's what worked:

  (1) clear cache

  (2) uncheck the box «writing XMP...» "in preferences/media

  (3) leave the first pro

  (4) copy the 2 audio files into another folder and replace the file name

  (5) reboot first and open the project

  (6) replace the film file by linking the 2 audio files to files to the new location

  (7) save the project

  (8) rendering