Premiere Pro export problems

Similar Questions

• Premiere Pro export takes forever! Even with CUDA enabled! Help, please!

  I am a sequence in first pro CC which is 1 minute and 40 seconds. the details of the sequence are:

  • Video files Blackmagic Pocket film camera ProRes HQ
  • lugins used for color grading on separate clips (as a comparison between the ranks of different color of the same clip) - convert movie, Magic Bullet Looks and three different LUTs
  • I added a box to the letters 1:2.35 on top of all the clips
  • In each clip to identify what plugin or LUT is used for each shot, I have added a little text

  Here are the specs of my computer:

  • Windows 7 Ultimate 64-bit (service pack 1)
    
  • Dual core AMD APU A4-6320 with graphics Radeon HD (overclocked to 4 GHz)
  • NVIDIA GeForce GTX 750 Ti 2 GB (overclocked)
  • 8 GB GDDR5 RAM 1600 MHz (such as two 4 GB sticks)

  Premiere Pro export settings:

  • H.264
  • 1920 x 1080 (1.0 progressive and square pixels)
  • 23.976 fps
  • Profile: high
  • Level: 5.1
  • Go to verified maximum depth (prores HQ bmpcc gets 10-bit)
  • Pass VBR 2
  • Bit rate = 30 target
  • flow rate Max = 40
  • Use disabled previesws because I have not been made in the workspace to verify it would not make much difference)
  • Made maximum use quality - I tried this checked and unchecked with the same time of export for both (I have read the forums where this should be disabled if you have the MPE CUDA enabled in Premiere Pro, because it is heavy CPU, but then some forums say always leave on any - which is really confusing)
  • I'm exporting to a hard drive with 7200 RPM

  Those 1 minutes 40 seconds sequence takes about 40 minutes to export which is too long. \I really need help understanding what the problem is and why export takes so long. Thanks in advance

  SAFEHARBOR11 wrote:

  What I've read above on these forums is that AMD chips lack any set statement that like the first, and that hurts performance.

  I read that too, and when I looked at the instructions mentioned, they were available in the new amd fx chips. the main problem for instructions is amd doesn't have a boost intels 32bits single thread. Intel has been very wise to make a unique help for former thread programs of 32 bits. the real advantage for users is that works of boost for the sloppy, 64 bit programs as bad coding in the adobe software. what it boils down to is intel offer superior performance, but at a higher cost to match. I recommend intel and amd if budget requires.

• Adobe 2015.3 Premiere Pro export settings

  Hi people,

  iMac (27 inch, at the end of 2013)

  3.5 GHz Core i7

  32 GB 1600 MHz DDR3

  NVIDIA GeForce GTX M 780, 4096 MB

  So, updated to 2015.3 and I see on the window of Premiere Pro export settings have changed considerably. One of the big things for me is I can not put my bitrates as I used a high-end and low-end, one pass, re-encoding, etc., which is kind of a big deal to me. Is there something I'm missing here? My old preset still life in Media Encoder but I can't get it to load first because those moments I export only a single video file.

  Any help is appreciated.

  Jim R.

  Well, I don't know what happened, but when I opened just first again (and I did that several times today since updated the software) the old presets were back. When I installed initially 2015.3 he only had like 6 or 7 presets available, now they are all here. Maybe some kind of anomaly or something weird I did initially. Anyway, I'm back in business. Thank you!

• Workflow trouble: switch to Media Encoder at the queue of Premiere Pro export

  I have a collaborative project where I have to edit and share short sequences of a larger project. Therefore, I do a lot of export and transcoding on the fly.

  My problem is that whenever I use Media | Export | Queue of Premiere Pro my Mac switches focus to Media Encoder. Since I have Media Encoder to transcode automatically I actually don't need to directly interact with it. I don't need to see. I just need to do his thing in the background so that I can continue working on my project.

  No one knows how to stop the switch of focus to Media Encoder?

  I know this isn't a bigger and a quick cmd + tab will switch me back, but still, it's annoying when I really just a background task.

  Thank you very much

  Michelle

  You cannot change this behavior.

  I'm not in favor of having otherwise, but you can drop a

  Feature request/Bug Report Form

• CC Adobe Premiere Pro export excruciatingly slow... Help, please?

  Hi guys, the project of a school in a few hours and I have struggled with premiere pro for nearly 15 hours on a 15 minute video. It's pretty basic, a few images and pictures in 1920 x 1080, but for the life of me will not export this thing. It starts very fast but slows to a crawl and then curls up and stops. My system is not pulling punches: i7, 3770 16 gb 1600 mhz ram, k-2 x 780 ti. Any suggestions? I'm dying here.

  Hey guys, thanks for all the help. I found the problem: Gaussian blur. I got a clip that was about 3 instances of Gaussian blur, adobe was very unhappy about it and refused to make this (even after a line of four hours , he was stuck). If someone experiences this problem, check if you have consciously or inadvertently stacked Gaussian blur.

• Problems of performance of Premiere Pro, no problem with AE

  Hello

  Recently, when I use Premiere Pro, I seem to have big problems. It runs really slowly, the preview always stutters and some projects with many files imported not even loading. I thought it was my computer die, until I started to After Effects. I thought that After Effects is a much more difficult program for my computer to manipulate than Premiere Pro, but it works quite normal.

  Recently, my laptop has been too hot a lot of times, especially when using Premiere Pro. It automatically shuts off safety. Perhaps because he was running this program, some of the files I messed up because of the heat?

  Is there anyone who knows if it's my problem or if there is another problem that I don't see?

  Many thanks in advance!

  4 GB is really not enough.  I sometimes struggle with 24 GB.

  If you do not intend crop your pix, 5000 x 3500 are great - and the fact that they are 9 mb probably contributes to the problem.  Strip unnecessary pixels - which makes the 72 dpi image.  Which will reduce your pix to about 2-3 MB each.   Reduce them to 1920 x 1080 (if you are not pan and scan)

  You probably also have problems with hard drives.  C is going to be difficult to store temporary files with only 9 GB of available.  Similarly, the D is a tad grating.  Are these disks 7200 RPM?

• Sony HDR-CX730E and Premiere Pro CS6 problem

  Hello

  When I try to import the images from the camera in first i´ll only hear the tone in the preview, but in the Mainwindow not.

  When I put the images in the scenario without audiofile is inserted.

  The material also has a quality loss, it s not HD-quality causes some problems as the horizontal when movement

  by turning the camera or do what a pan of the issue occurs. Maybe first can't properly handle MTS files?

  How can I fix in Premiere Pro CS6? Clues or tips?

  The Sony Homesoftware works perfect, no problems, brilliant images and movies.

  But I need to create to create a more advanced furrow. It s is not possible with the software "PlayMemoryHome". "»

  Best regards

  Peter Lanister

  > First cannot properly handle MTS files?

  Works perfectly for me

  Do not copy the entire folder of your camera on your hard drive for video data

  Metadata contained in the folder & link to the implementation of a project http://forums.adobe.com/thread/1015001?tstart=0 folder

  Also do not have a correct project sequence

  PLEASE NOTE that the PPro CS6 screen may be a little different

  For CS5 and later versions, the easy way to ensure that your video and your project

  See 2nd post for the photo of a NEW ELEMENT of process http://forums.adobe.com/thread/872666

• Adobe Premiere Pro CC - problem

  Hello, I already had to pay for Adobe Premiere Pro CC, but I forgot to pay. Now, I ordered a new plan, and it's paid for. But when I now try to open first pro it says that I haft to renew my subscription. Why?

  Please close this, I did the job.

• Help ~! Adobe Premiere Pro exports the poor quality video...

  I'm testing in order for use to YouTube videos of Adobe Premiere. No matter what I do, the problem I have, it is the quality of the exported video, doing not well and it's frustrating... = me '(je voudrais que quelqu'un qui sait ce qui pourrait se passer à me dépanner ici!)

  Therefore, the screen that I was working. This character, I drew... I'm trying to use it in the clip. The left is the original, right, how he showed first upward instead (a little too zoomed in). Accordingly, I decided to reposition him and him a bit fits back in effect... not too bad so far.

  So as I said, this was just a test clip so I tried even second-clip. This export press, I made the following adjustments:

  
  No. correspond to the parameters of the sequence

  Format: H.264
  Screening: YouTube HD 1080 p 23.976

  Yes , export the video and export audio

  No Gaussian blur

  Width 1 920
  Height 1 080
  Frame rate: 23.976
  Order on the ground: progressive

  Appearance: Square Pixels (1.0)

  TV standard: NTSC
  Profile: high

  Level: 4.0
  No. made to maximum depth

  Encoding Bitrate: VBR, 2 pass
  Target Bitrate: 15
  Maximum flow: 25
  Yes distance keyframe: 72

  No Maximum render quality
  N use found
  No. interpolation

  With that, I queue it and export it to my office, no other changes. After I saw this however... it is really blurry. It seemed to me that if the video demoted to 240 p.
  

  I would like to help with this, I would like to make my videos much more crisp and sharper than that... the image itself has been designed around 500 x 800 pixels, so there should not be a problem with the picture itself (I think)...

  Help meh!
  -Supy

  Well, we found the problem! You start with an image of HD quality, stuffing in a sequence to only 720 x 480 DV, losing more quality... and then export the image shrunk down is actually jumping again HD.

  If you intend to export at 1080 p, then sequence settings must also be 1080 p. Think of a sequence like a picture frame. If you have a photo 8 x 10, you need, for example, a frame 8 x 10, not a 4 x 6.

  Please use file > New > sequence, then AVCHD 1080 p > and then decide what rate to deliver, 30 or 24, and then choose a preset suitable to work with. What frame rate you select, and then use the same for export (in reality, it is rate of 29.97 or 23.976, rounded names for simplicity).

  Thank you

  The f

• SpeedGrade does not open my sequence when I send it via the direct link of Premiere Pro. Problems known/patches?

  I finished my sequence and tries to send to SG-CC15 and the page opens and then nothing.  No display or anything like that

  Here are the lines of the response of the newspaper which concerned me:

  : No detectable display

  Driver: Driver not detectable

  ["GlobalSettings"]  Failed to load user settings, using the default values.

  Any thoughts here?

  Neil R,.

  Thanks for your help!  Finally, I just uninstall the first and Speedgrade and then installed both and that solved the problem!

• Error compiling Movie.  Unknown error.  Premiere Pro export failed

  Error compiling Movie.  Unknown error.  I get this message when you try to export my calendar to any format.  It exports for a while, then I get this message.  When I try to export using the media encoder it gives me just the sound of sheep.  I'm starting to hate this sheep.

  Does anyone know how to figure out why it throws up to this error message, and that the solution is to go around?  I've lost countless hours trying to figure out a work around.  I can't just scrap the project, it took me weeks.

  I was able to export fine dozens of times before, so I'm not sure it's important that my features are but here goes:

  Custom PC integrated with windows 7pro SP1

  Intel Core i7 - 2600 K CPU @ 3.7 GHz 3.4GHz

  16 GB of ram

  64-bit operating system

  After the implementation of many suggestions here, I was able to export the project 9 min successfully.  I need to take you all at dinner.

  I don't know what suggestions has been around, but I have a feeling that it was a combination of ideas that went around.  Here's a breakdown of what I did to change the project so that it can successfully export:

  1.) reset all stills in motion tab to its original settings & then click right on it in the timeline panel and choose 'to scale to the size of the image.

  2.) replaced all files nested with the original tracks.

  3.) changed the sequence settings (changed under subsection video previews and editing custom Mode > select the File Format as Microsoft AVI, uncompressed Codec Preview.)

  I had to make a new render all previews after changing the settings of the sequence, and I had i/o errors while the process, but Adobe first CC of reboot resolved somehow these errors.  Several times during the editing process of the chronology (based on items 1-3) previously mentioned I had to reboot first due to a loss of the preview screen and inability to make things.  At the end of the day, I could so that he could succeed export so again once I thank you all.  It's a VERY important project for me and I'm serious about you take all this at dinner

• After Effects CS4 (and Premiere Pro CS4) problem

  For the last two days, I got wrong from my Adobe software. (AE and PP)

  Suddenly, I got this:

  

  I had this software for a year or two without any problems whatsoever. I didn't put in my series of fear, it's a virus.

  Things I did to try to solve this problem:

  Restart the computer (several times)

  Run AVG analysis on the computer the whole (done several times)

  Run CCleaner to check all the problems and cleaning (done several times)

  Restored to the computer in the back a few weeks ago, when I heard that the software worked. First, many times I did this, it would just restart and say he could not restore because a process if he stopped to run. Finished restoring in safe mode with success.

  Look for any strange process on my computer. Nothing strange.

  Any ideas where to go from here?

  Thanks in advance-WilsonCW

  You should receive the dialog box if you are in test mode, whenever you launch the application.  Also looking at this thread it appears you used a registry cleaner and then a restore point, but I see that you have tried to reinstall the software?  Have you tried to remove and reinstall the software?

  Also advice before using any type of registry cleaner, I always recommend getting into Regedit and the backup of your registry.  This way if the registry cleaner is damage, you can restore the damage that has been done.

• Premiere Pro CS4 - problem with the monitor program.

  Hello. I am not able to solve the problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline panel and read it in the monitor program, vision in the monitoring program is not monitor of race: black or a small part of the picture appear... sometimes changing colors. ASUS P5QPRO Intel 9550 and Sparkle Nvidia GeForce 9800 GTX + 1024 DDR3; directX and the latest gpu driver are installed. Different configurations of Strath discs have been tested. Where I'm wrong?

  Although largely in the max. PrPro range, which is always likely to much larger size than that required. This ARTICLE will give you general information and a workflow possible.

  Coming from the camera, JPEG should be RGB already, so no problems with CMYK.

  Good luck and hope that helps.

  Hunt

• Export from Premiere Pro CC 2014

  Hello

  Whenever I'm ready to export my project my first Pro CC 2014 stop answer all together. I tried the short cut (command + M) or through the bar Manu. the result is the same, first Pro CC 2014 just freezes and does not respond to what it is until I force quit and relaunch allover again. I tried exporting from Premiere Pro auto, without using the Media Encoder, but the problem remains the same.

  I use the new Mac Pro. I've heard talk of that adobe Premiere Pro has problems with the new Mac Pro. Is this true? Or another problem?

  Thank you and looking forward to hear from you again,

  Maruf

  Hi Alex,

  • Can try you to reset the preferences for Premiere Pro and SOUL? Press the shift and Option keys at the start of each program. Then try your export once more.
  • If this does not work, you can try to do that all Adobe files have the correct permissions set. See this blog: first Pro CC, CC 2014, 20141 freeze at startup or crashing everything working (Mac OS X 10.9 and later)
  • If nothing else works, try changing the Mercury playback engine in Premiere Pro and SOUL 'Software.' only

  Thank you
  Kevin

• Premiere Pro CC 2014 and 2014 Media Encoder CC problem

  Hello

  Whenever I'm ready to export my project my first Pro CC 2014 stop answer all together. I tried the short cut (command + M) or through the bar Manu. the result is the same, first Pro CC 2014 just freezes and does not respond to what it is until I force quit and relaunch allover again. I tried exporting from Premiere Pro auto, without using the Media Encoder, but the problem remains the same.

  I use the new Mac Pro. I've heard talk of that adobe Premiere Pro has problems with the new Mac Pro. Is this true? Or another problem?

  Thank you and looking forward to hear from you again,

  Maruf

  He is a former post office that was found on an obscure forum. Please let us know if you still experience this issue.

  Kevin