HELP, hp officejet pro 8600 increased, it appears it still is "not connected".

Similar Questions

• HP Officejet Pro 8600 more sees two wireless routers - does not connect

  I bought a HP Officejet 8600 and tries to connect to my wireless network.

  I have the printer connected directly to the computer.

  I restarted the computer, the printer and the time capsule.

  I am running OSX 10.8.4 on my imac.

  My wireless router is a time capsule that is in common with all the firmware.

  When I try to connect the printer to the wireless network it tells me that "more than one access point/router wireless was found which corresponds to your wireless network (SSID) name".  No 6 other devices that use the connection without wire see what second SSID with the same name and I can't find in Airport utility where there is a second network.

  Any ideas?

  Did you go in the settings of the router? Looks like it is set to dual band and sends two signals. If you go into your settings and change, it is only broadcast at 2.4 GHz, which should help you to connection problems.

• HP officejet pro 8600 save as editable text (OCR) does not

  HP officejet pro 8600 save as editable text (OCR) does not

  the printer reports: can not detect install OCR s/w...please

  IrisOCR 12.3.4.0 is indicated as being installed

  How can I get printer recognize/find OCR?

  1 uninstalled existing installation

  2 deleted all files

  printer 3.re - installed s/w

  4 still does not

  5 uninstall printer new s/w (about you 4th time)

  6. deleted all files in HP printer

  printer 7.re - installed s/w BUT

  8.re - installed in a different folder: HP-2

  Now everything works fine

• Clubhouse 23 HP: HP Officejet Pro 8600 is offline to a computer, but not the other

  In our office network, we have problems with printing. We have several computers set up in the network and all print on the same printer, our HP Officejet Pro 8600. However, you can print from all except one. It reports an error in offline mode. Usually, rebooting the computer and the printer solved that problem, now, is not the case. I uninstalled the printer, reinstalled and it worked temporarily. I also disconnected from the network to the printer and the computer and reconnected them both. I have also shut down the computer, the printer and the router and restarting their router, printer, and then computer. I still have the same problem with just a computer. Any help would be greatly appreciated.

  I solved the problem on my own. I had to remove all the devices on the network printer and reinstall on all devices.

• OfficeJet Pro 8600 - 'Edit analysis jobs' in utility HP not clickable

  I initiate scans of my mac to the Officejet Pro 8600.  Everything works fine, but I can't change the scan destination folder.  It is by default in the folder of photos on my mac.  To access scanning HP utility parameters, the button 'Edit analysis jobs' is grayed out and is not selectable.

  I uninstalled and re-installed Officejet-Pro - 8600_v12.23.0 - 2 and made a check and repair disk permissions.

  I use a Mid 2012 MacBook Pro with OS X 10.9.2 and communicate with the printer via Apple Airport Extreme version 7.7.2.  Airport Extreme is connected to the printer via a USB cable.

  

  Hello eljnlm,

  Welcome to the HP Forums!

  I understand that you are unable to change the folder of destination of scanning on your Mac computer. Thank you for providing such detailed information! I will do my best to help you! I noticed that you do not have the HP Update Web site software.

  I recommend you to uninstall the software here. I know that you have an Airport Extreme, but it is connected by a USB cable. I would recommend following these steps to achieve a solid wireless connection. Please unplug the cable USB of the router and the printer.

  Make sure that you have run the Wireless Setup Wizard on your printer. I'll give you a document HP if you did not do this operation here. Then, please install the latest version of the software from the HP website here. Follow the rest of these steps in this document.

  Please post your results.

• HP Officejet Pro 8600: Upgrade to Windows 10 and does not recognize the printer scan function

  What should I do to get my scanner to work with Windows 10?

  Hello

  Re-install or update software and driver help. But what is your HP Officejet Pro 8600? HP Officejet Pro 8600 - N911, it must be* where * can be from a to z.

  Kind regards.

• Printer HP Officejet Pro 8600 Plus works but the Scanner does not

  I recently bought a Toshiba laptop with Windows 7 Home Premium operating system.  My previous laptop is a Toshiba also upgraded to Windows 7 Home Premium operating system.  I have a printer HP Officejet Pro 8600 more all-in-one printer.  The printer/scanner works fine with my laptop more older but with the new laptop that I can't get to the printer.  I am not able to get the scanner to work.  I reloaded the software several times but the scanner still does not work.  The scanner works fine with laptop more old, even if it has the same operating system.  I get an error message that says "Scan of the computer is turned on.  You can start a scan from the printer.  Your computer is not listed as an available computer control panel of the printer.  If please restart your printer and try again. "Can anyone help with this?

  Hi ranjisamaraweera,

  Even though I'm MVP I represent Microsoft or speak. If I can and will speak
  as I think.

  The proper functioning of the printer and Scanner is the direct responsibility of the producer of material
  and no windows. There are hundreds of these devices that work correctly on Windows 7 if
  those who don't have no drivers and other interfaces which are not compatible to Windows 7 should be
  written correctly. Of course many older devices are not supported by their creators for later
  Versions of Windows. Microsoft passes but does not write drivers and interfaces
  Printers and Scanners need to function properly. So, the manufacturer and no one else, is totally
  Manager to see if there are interfaces and appropriate drivers.

  Many device makers do not write new drivers and interfaces for older hardware because either
  they cannot support the new methods or because they want to sell new hardware.

  Personally, I don't think that Microsoft is lying because they also say that device manufacturers have the
  Omos unique to provide the necessary compatible drivers and interfaces.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Officejet Pro 8600 more N91: Printer crashes with 0xB845D7DC when connect to UPC Ubee cable modem/router EVW3226

  Printing: HP Officejet Pro 8600 more e-All-in-One Printer - N911g

  SN: [personal information]

  REF: CM750A

  FW: CKP5CN1516AR

  Then try to connect to the router wireless (active DHCP), the printer LCD display starts to blink and a second, it displays B845D7DC.

  After that, the printer asks to reset and it restarts with wireless off.

  I have a cable modem with router wireless of my cable TV UPC provider called UPC Ubee EVW3226.

  I tried to connect the printer to the router using the WPS button and provide the password. In both cases, I have the same behavior.

  I have a dozen other wireless home devices that connect without problem to the router. But not the printer.

  Please let me know what other information will be good for you to solve the problem. Or, please provide a workaround solution.

  I found the solution:

  connect to your printer cable (you can use a direct eth between your computer and your printer cable), access the web interface and disable support IPv6 (let the IPv4 only verified): network > General > protocols > only IPv4 verified. Save and restart the printer.

  In 80% of cases, it will work on the wireless connection. For the other 20% when it does not work, try to assign a static IP address to your printer (network > Wireless > IPv4) in a second time. Take data from your router (IP, gateway, DNS).

• OfficeJet Pro 8600 Plus: Scan of the computer does not work with Win8.1 [solved: problem with USB3 Boost]

  Since I have installed 8.1 (pro), I can't use my 8600 software Pro for scanning the computer (via USB). It seems that there is no communication with the printer regarding the scanning software, but printing as usual.

  Tried to use the HP printer Assistant: when I click on the button "scan a Photo Document or", I get a message "inaccessible Scanner. Also restarted the printer.

  When I try to scan from Photoshop, the system first finds the printer, but it fails to connect.

  Update HP says that my system is up to date.

  HP Print and Scan Doctor 4.2 concludes and tells the printer on the welcome panel and seems to be able to communicate with him, up to a point.

  It gives me a error 'pilot' (sorry if is not called in English - he takes over my keyboard language, which is French and says "Pilot error") and says that no communication could be created between the printer and the driver for scanning, and I have to restart the computer...

  So I did and revived the software of the doctor, who gave me the same error message. This time, I clicked on 'Ignore' and let things. He ran a "Scan" Test twice and said that everything was going well or had been repaired. But strangely nothing on the printer during these 'tests '. And in the end, as he offered to do a scan test myself, I clicked on OK and I got the error message "inaccessible Scanner" again.

  Then I did my scans on a USB key, as I have done a few times already, and has gone very well. But I'd be happy to have this function "Scan to computer" back. How?

  Thanks in advance 23. It is resolved! See to the end.

  I use McAfee (All Access - Total Protection). All green. I did some research using 'Paint', 'Windows Fax' and 'Scan' and checked all the results using McAfee: 'does detect any items that require your attention.

  Here is a series of screenshots when you run printing HP and doctor Scan:

  

  

  I click on "Scanning troubleshooting..."

  

  I click on 'Ignore' right now because I know now that a restart will not help, but I have already tried (see my first post).

  

  

  It seems that the problems have been repaired. And if I click on 'Scan Test', it seems too good, initially...

  

  But if I go on and click on "Scan", bye bye:

  

  Everything is the same as the first time, as I remember.

  I checked services: dependencies are OK (RPC is in the WIA Service dependencies). Both services are "Running" and "automatic". I stopped and restarted WIA. No change.

  I launched a sfc/scannow:

  

  Before that, I changed the USB (a new one): no change.

  AND THEN: I unplugged the USB cable connecting the port (USB3) standard (directly on the rear panel of the motherboard) and plugged into a PCI USB3 card. And all was well with the scan.

  Do you think this says something about my motherboard (Asus X 79 Deluxe brand new) or on the Officejet?

• HP Officejet Pro 8600 Plus: printing and scanning option is not presented when one clicks on destop icon for HP printer

  When I click on the HP printer on the desktop icon, it does not open the usual window for all functions of the printer.  I just get a notification asking if I want to leave the program to make changes to my pc.  Also, when I click on the option of printing a pdf document, the print window that opens only allows me to "Save" the document not printi TI (the 'save' button is substituted for the 'print' button).  Can I save the document and print then after I opened from my windowssaved file, if the printer is working and will analyze in the screen of the printer associated with the.  This is done via the wireless connection, so it works.

  Hello

  Try following the steps listed below and check if it can help, the steps for Windows 8 is also applicable for Windows 10:

  http://support.HP.com/in-en/document/c03640384

  If this does not help, try following the "printer software installation & screen opens instead of HP printer Assistant" section below:

  http://support.HP.com/us-en/product/HP-OfficeJet-4630-e-all-in-one-printer-series/5305049/model/5305050/document/c04714314/

  About the "print" button, I guess that's not related wit the real software problem:

  Google chrome opens the print dialog box, and then press the button change.
  Select your printer from the list instead of the default save as PDF option and try to print again.

  Shlomi

• HP Officejet Pro 8600: Printer list offline when it is not.

  Printer list offline when it is not.  I connect wireless to my network that everything is connected properly; can scan etc, but when I try to print it says printer offline.

  I didn't turn Windows 10 for much question of withour months, now today go... tried everything!

  Hello

  Thanks for the comments.

  You can try the following:

  Creating a TCP IP port

  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.

  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

  Hope that helps!

• HP Officejet Pro 8600 has all of a sudden is not recognized by only my computer at home

  Hi, I have 4 laptops in my house. We have all been connected wireless to my HP printer for over a year. All of a sudden, for some reason, my computer no longer sees the printer. I have an ASUS. I run Windows 7 with the Windows Firewall. My router is a Linksys EA3500 age of 3 months. I can print from each another printer at home, and I can also print from my Android phone. However, when I try to print from my laptop, he says now that it detects a printer has been turned off.  I did everything that I can think of to fix this. The only changes that I had recently installed program AV of Webroot. I can't be 100% certain, but I'm sure that I printed from this facility, and all the other computers on my network use Webroot as well without any problems. Hoping for help. Here's what I've done so far:

  1. Tried troubleshooting printer via the computer. He went through control of the coil and all service that the standard troubleshooting only. It says something about my printer is off. It certainly wasn't, but I unplugged and rebooted just to be sure. No solution.
  2. Noticed the IP has changed on the printer and thought that maybe something with dynamic vs static (don't know much about it) so went to 'update IP address' on my laptop and updated info. Checked the info of the router settings by entering the IP address of the printer in the browser. Printer shows connected and ready and everything seems good. I ping the ip with the results. Mac filtering is not enabled, so I don't need to deal with this. SSID is not hidden. 802.11 configuration indicates that the network type is WPA - PSK WPA2 with AES selected for encryption. As always, it has been.
  3. Double checked to make sure printer was recognizable by my firewall. It is on the accepted list.
  4. Last resort: I uninstalled the printer software and removed the device from my laptop. Attempt to reinstall, but when it gets to the part where it is supposed to search for the printer, it says cannot find. I enter the IP address of the printer and it does not always find. I enter the host name, and it does not always find. As I uninstalled it, I can no longer install the printer at all.
  5. Then to airline pilots and I tried using the installation via the online option. same results. "Cannot find the printer.
  6. I unpugged the printer from the wall, again, this time for more than an hour, hoping that it would reset, but visiting this probabaly account is not the problem since any other laptop can print in my house.
  7. Tried to plug in the ethernet cable and the printer this way. Plugged one end router and another printer according to the instructions of troubleshooting tips. Software disc and it does not install the printer. Change IP address on the printer when I use ethernet and I entered new ip accordingly.
  8. Reset my modem and rebooted. Resetting my router and then used software to reconfigure. do you have the standard "wait ten seconds and a plug in back and restart the computer". No solution.
  9. Check my network wireless adapter setting to make sure that I have more updated drivers. Yes.
  10. Delete everything that relates to my printer in each folder and in regedit.
  11. Tried to reinstall printer wireless both with ethernet. Unable to find the printer so be it.

  I haven't changed any settings I can think of since the last printer worked a few weeks ago. As I said, all other computers print perfectly. The only thing I can think of that is different is all oher laptops running Windows 8 and I am always on 7, but it's not serious before, and I can print from the HP printer on my phone software.

  Please someone tell me what I'm missing here. I'm going bonkers. Thank you very much to everyone who takes the time to answer on this support forum.

  Thank you very much for your detailed answer.

  I put a static IP address on my printer to 192.168.1.3. After several attempts to install the printer I just couldn't. I decided to run combofix and after that and a reboot I was able to install the printer successfully. Everything went as it should work. IP address is. I thought I was finally going to solve this problem. Then, I hit print a document and it doesn't have same queue in the printer.  I remembered that I read on how you need to go to the printer properties and make sure that the printer is on the TCIP port with the IP address. That was the problem. He had the bad IP. I changed the IP of what I changed to manually and voila. I print again.

  I think everything that happened during the changed dynamic configuration ip 192.168.1.110. I don't understand why all Win8 computers in my house didn't get affected, but I'm just glad that affecting an address static IP did the trick. It has been weeks since I've heard this thud hit sound of my printer from my computer.

  Thanks again for your help.

• OfficeJet Pro 8600 wants fax info when asked to print

  OfficeJet Pro 8600 prints test page ok, but do not print anything My Documents or a receipt from a purchase online.  A screen will appear with corner 'Send fax' at the top left, boxes of 'to', 'add a cover page', 'Add scan' and 'settings '.  There is no error message or the number.  Tried to remove and reinstall the printer drivers and.  Worked fine for 2 months, then started it.  It is not connected to a phone line and has never been used for faxing.  It is connected to the wireless computer network.  Tried to connect to the network with cord - also not able to print.  Any help appreciated.

  Hello

  I guess that the fax printer is set as default, download and execute HP Print and Scan the link below Dr utility.

  www.HP.com/go/Tools

• Scan more OfficeJet Pro 8600: Officejet Pro 8600 Plus resize problem

  With the help of Officejet Pro 8600 Plus to scan documents on computer in PDF format.

  I'm tring to scan a document that contains very important information just at the foot of the page, but when the scanned document appears on the computer screen, I see that he has not captured at the bottom of the original document.

  I can work out how to resize the document to the copy function, but I can't find an option to resize for scanning.

  Nobody knows the answer to my woes?

  Thank you for your help.

  Hello

  Thank you for using the forum.

  You can choose the scan size, example as shown.

  

  In addition, these videos may be useful for you:

  Scanning multiple photos:

  HP Officejet Pro 8630

  https://goo.GL/ADYDmo

  Scanning tips:

  HP Officejet Pro 8630

  https://goo.GL/fjZvqM

  Hope that helps.

• HP Officejet Pro 8600 - Solution Center (or whatever his name with the 8600 series) does not start

  Dear all,

  Very frustrated with HP. I just bought a new HP Officejet Pro 8600.

  I install the software from the CD. It installs without problem

  I try to click on the icon 'HP Officejet pro 8600' and the solution Center (or whatever his name for this printer) applicatoin don't start/load - I see he's trying to do something for the first time, but no user interface is displayed.

  I have uninstall all HP software.

  I download all of the HPs site with HP printer software install wizard for windows - this is a utility that allows you to draw trouble and detecting good software of the printer.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/p...

  The software is properly detected and it installs without problem after download of HP

  Then, I click on the "HP Officejet pro 8600' in the office, the application software not load/boot. Yet once, it looks like somethings wants to start, but isn't that the UI never appears on the desktop

  I have unintall HP products

  I have uninstall Adobe flash 11

  I redo the steps of Installation Wizard printer and the same happesn (i.e. after a clean installation of the Solution Center for HP Officejet Pro 8600, I can't start the application)

  It's really frustrating.

  I use windows 7 64-bit.

  Can someone please help.

  Thank you

  printerPK.

  Hello everyone. I understand that you have to open the Printer Wizard. To troubleshoot the defective Printer Wizard, follow the steps described in this document from HP: http://support.hp.com/us-en/document/c03640384

  Note: The title of the document concludes that the program opens with a Script error. However, the troubleshooting steps are exactly the same. Essentially, the software needed to start the program was not installed successfully, or blocked.

  Please let know me when you are done troubleshooting. I'm only here to help!

  Mario