Help in the selection of the image...

Similar Questions

• Help with the images to be copied

  Hello

  Thank you to spend some time to help me with this problem. IM new in the Flash world

  I'm actually designing a website and need to copy images from one page to another. The problem is that after pasting images in another place I don't seem to be able to change it without going through the change in original frame. Is there anyway I can copy images (animation, buttons etc.) and still be able to edit them without going through the change of original?

  My intention is that both have multiple pages with the same basic design but the slight modification on each page.

  Thank you

  You can change the objects in the images pasted regardless of the originals.  But if you double-click or otherwise go objects 'timeline', will you change all instances of that object, including the (s) on the original images.

  to remedy this, create duplicate objects and use the properties panel to switch the original copied with duplicates.  You can then change the duplicates without editing the original.

• Help place the images - why they appear to 150% and a bad image?

  Hello

  Relative newbie here.

  I have my display performace in InDesign too high. If I "place" an image or just simply slip it on the page, and little matter which image file format I use (tif, png, jpg, whatever), when placed, the images appear about 50% bigger than the source and low - ish quality. I have then to try to manually resize them so they look good on screen and when printed.

  • Why when I place images not appear 100%?
  • Is it possible to resize images other than striking handles resize and hoping for the best?

  Thank you very much.

  OK, if the balance indicates 100% with the direct Selection tool, that's what you have. Note that using the regular selection tool (the black arrow) will ALWAYS show 100% in the areas of scaling unless you have set your preferences to 'adjust scaling percentage', this is why you use the direct Selection tool to check. You can also select the image with the tool and look at the Info Palette. the real and effective ppi listed will be the same at 100%. What resolution is currently in the range of information?

  I asked vs click, click and drag because in CS4 when you drag an image is still growing the image to fit. That's not true in CS3.

  Screenshots are generally 72 ppi to size, they are captured. 72 DPI is low for most of the printed work, but no one expects very much in terms of quality for screenshots. You really place, right, is not dragging from Photoshop in ID, which is the equivalent of collage? Paste a picture gives you only the preview screen in CS3. I'm not sure you will see a difference with a screenshot, however, since the preview will be also 72 dpi.

  If the image is really too large on the page you can evolve in ID now the Ctrl + Shift keys while dragging a handle. You must press the keys before you click the mouse in Windows because there is a bug. You can also use the scale tool, or enter a new value of the scale in the areas of scaling. You can use actual dimensions in these areas if you include units, incidentally.

  In Photoshop, you can adapt the image using Image > Image size... If you uncheck the 'resample image' the resolutiuon will change inversely proportional to size, in order to reduce the size will increase the resolution, but there will be no difference in quality during the scaling in ID.

• Help! The images on my site are moving...

  Hello world

  Please enlighten us on this subject, I am experiencing. After the publication of my site. I pulled upward on my iphone and a majority of my images were scrambled. Image displayed in preview in Design view, it looks perfect. Help, please...

  For a fluid design works on a phone, you no more to define your minimum page width wide enough for that all of your content in resizing as small as possible fits, or if you need revamp or change your content such that it fits in what is your minimum page width.

  In the case of this particular page, there are items that don't/can't be resized smaller than a width of the page on 755px. They start at less than that coming out of the right side of the page.

  Mobile browsers to zoom out to view the entire width of the content of your page. So the page itself is resized down to ~ 380px together, but the content stopped at 755, then the mobile browser zoom out to display the complete width of content and you get what is in your screenshot.

  Set your minimum page to 755 size and live with how the phone everything is changing down there (probably too small), or add a breakpoint and reorganize your content so design works in the width of a phone.

• Update Android from 4.2 to 4.4. problem help move the image to the sd card

  After update android from 4.2 to 4.4. My slate 7 cannot copy anything from internal storage to sd card.

  Before the update, I installed the HD file manager. It is displayed "suite of files have not been glued," after the paste. Can anyone help?

  Hi Shiuyin, welcome to the Forums of HP. I understand that you are not able to copy files to the SD card after upgrade to KitKat. Android has changed their security settings, and you will probably need to find a file to upgrade Manager.

  Work with files (Android 4.4/KitKat)

• How could I possibly remove the default image in the image control?

  I use the image control and a bit of code to create a zoom on a picture effect. Everything works fine however I get a picture of labview when the Vi is loaded for the first time. I'm trying to get a blank area instead cause it looks like not really tidy!

  I have attached a picture and my code.

  Thanks for your help

  

  The image is configured to be the default value of "Photo". In other words: you must get rid of the default value. You can do this either by:

  (a) 'Image' of delete and recreate. Disadvantage: You have to re-create all the nodes property associated with this control.

  (b) load an image empty and select "data operations > use current default value.

  hope this helps,

  Norbert

• When I right click on the image to select the Image view the Do option auto cannot be selected in the window pop up, it's gray, pls help

  It is in this site http://pics.data.bg/zoom/albums/8f13e1013d12c622ea6b3962684c9828

  on the image - right click > View Image > popup window > open with, the Do this automatically check box cannot be checked

  Viewer - Infran View - I do select outdoor with > window navigation every time, this should be done automatically, but the box is grayed out

  is there a solution?

  Thank you

  • Open in browser: https://addons.mozilla.org/firefox/addon/open-in-browser/

• Having difficulty using the quick selection tools to remove the images of background form. Any help appreciated

  Hi all

  I try to remove the background from images using 3 different selection tools.  I'm going fine, but eventually the images together ceases to be caught than ever the tool I use.  It is easier if you use a pro version of photoshop and not all versions of elements?  I have 11 items.

  Thank you

  -Deby

  You are welcome. If this does not work for you, consider using a mask. The goal is to preserve the foreground and hide/remove the background...

• With the help of the mouse click to return the coordinates of the image.

  Okay, so I tried to find a way to do it, and it seems very complicated for something that sounds really simple.

  Anyway. I have a camera that updates an object image on the front panel using a while loop. I have another image object that is updated with a still image when you press the button "snap." Now what I want to do is to click on a point in the image that are broken and have the VI to return the coordinates of this pixel as part of coordinated image.

  What I have so far is a structure of event in the while loop with the following to happen where "image object-> the mouse down:

  Server reference (reference to the image object)-> property (last position of the mouse)-> output coordinated screen node.

  I have two errors that don't make much sense to me (I have not worked with before event structures): ' event data node contains terminal unwired or bad "and"structure of the event one or several cases of event have no defined event. " This second shot seems odd because I don't actually want nothing to take if there is no click of a mouse. The first seems to refer to the box of the element on the left side of the structure of the event.

  Above is my last attmpt to the trouble of sorting and as far as I can see it should work. whatever about the errors, I even take the right approach with that? I would have thought cordinates image would be quite common but seek advice here, it does not seem...

  A bit puzzled here. Any help is very appreciated.

  Hello RoBoTzRaWsUm,

  I took a glance at your VI, who took a correct approach to the data you are looking for.  As you structure to aid and the event, you should look for an event to occur.  When you use a property node, you try to read an attribute of a control.  However, in a Structure of the event, I think you should use a node to invoke.  Allows a node to invoke your read an event or write a method with the control class in LabVIEW.

  1. place down and call the node in the Palette of functions in "Programming"-> "Application Control".

  2 wire your reference Image control to this

  3. click on the method, and then select 'get a last event. "

  4. right click on "Events that" and "create Constant.  Do the constant '1' in the table

  5. read the Cluster "Contact information" from the left side of the case of the event by clicking and "create indicator.

  You will find a piece of code attached example.

  Concerning

• someone can help m ' porq mi pc no image los devices or the wevcam

  someone can help m ' porq mi pc no image los devices or the wevcam

  Hello
   
  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
  http://support.Microsoft.com/common/international.aspx
   
  Thank you

• Selection of Inspection based on the attributes of the image

  I'm processing the stored images and must choose an inspection based on attributes of the image as the name and the size (length in pixels).

  Currently, I do all this in only one inspection, but since I'm inspecting several product families (differentiated my name of the image), and several sizes for each family, my inspection algorithm becomes very difficult to manage, so I would like to create a supervisor application that can determine which family of products and the size I'm looking, and then run the corresponding inspection and then do some data sharing and saving the image and loop back to the next image.

  I played with the ability to select Inspection in VBAI, but since I'm not on the material or communications to select the inspection, I can't seem to find a viable solution, ideally, I would like to go through the step of configuration once, then jump to the state diagram for the treatment of the initial image (determine the product family and size) then go to 'Select Inspection' and run the corresponding inspection.  This is where I'm stuck, IE., how to trigger the jump to select inspection in the state diagram?  Some people I have consulted so far say: you can't do that!  Anyone beg to differ?

  If I can't access select Inspection of state diagram, then plan B is to use the LabView API and make the principal contractor in LabView, it is where I need to go?

  Thank you

  Eric

  If you have the indicator Activate Product select enabled, select product State will run automatically after the State inspect goes to terminal completion. You can use a VI select LabVIEW Run in the State of product for your logic and move to the next round to load. With Vision Builder AI 2010, this path can be considered to be the real path to the inspection (inspection select dynamically run then) so you do not preconfigure a lookup table of inspections to run with values (it was the previous way of doing and it does not allow to dynamically load new inspections that weren't in the preconfigured table). Don't know how it works with your system, but using the LabVIEW API is an alternative that would give you better control and. You might even have a stage run a LV VI specify the control to use on an iteration in Prioduct selection state and inspection of logging of data/images to use later, but due to the opening and closing of the inspections overload new inspections may make having an inspection separate for logging of common data/images does not not your needs timing.

  Hope this helps,

  Brad

• When I change my background in my settings, it always enlarges the image no matter what I have to do select. He's not mosaic, Center, made

  When I change my background in my settings, it always enlarges the image no matter what I have to do select.  It will not tile, Center, adjustment etc. Only, even with slideshows, stretch my photos.  Is there some setting that is locked I need to uncheck?  Help!

  Original title:

  Computer background

  Hello

  • If it works well before?
  • What were the changes made before the problem occurred?

  You can view these methods:

  Method 1:

  I recommend you perform the clean boot and check.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  If the problem persists in safe mode, create a new user account and log on to it
  see How to create and configure the user accounts in Windows XP .
  b. connect on the new user account and check if the problem persists.

• Not able to see the images in the Windows Vista Help file

  I use a Windows Vista operating system and I'm not able to view the images in the Windows Vista Help file... ! Here are the troubleshooting steps I tried to solve the problem:-

  1. I tried sfc/scannow and chkdski/f/r.
  2. Tried to clean boot.
  3. Tried to create a new user account.
  4. Tried in safe mode.
  5. Downloaded and installed the WinHlp32.exe file from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5143
  6. Tried running the http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx SubinACL tool
  7. I tried Startup Repair tool.

  Could you please temme then what to do? I look forward to hearing from you soon.

  Hello
  Try this for this issue:
  Equip your Windows recovery disk, then select "Reinstall partial '.»
  Check the "Winhelp" since the consolidation of program.
  Next
  Finishing
  Then restart.
  Which solves the problem?
  hope this helps,
  b Eddie

• Try to burn images on a cd to make them playable on home dvd player. the computer will burn on the cd and the images will not play on a DVD player? any help would be great.

  Try to burn JPEGs on a cd in "master" mode to make them playable on standard dvd players. the computer will burn on the cd and the images can be viewed on another computer, but cannot be viewed on a DVD player? any help would be great.

  Hello Lackyboi,

  ·         How you try to burn the pictures on your CD?

  ·         What is the burning software CD that you use to burn the discs?

  I suggest you burn your photos using Windows Media Player.  You can read this article which will give you information on burning media with Media Player:

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  1. in Windows Media Player, on the Tools menu, click Options.

  2. in the Options dialog box, on the devices tab, click the name of the reader of CD - R or CD - RW you use and then click on the properties button.

  3. in the Properties dialog box, under the recording tab, select a slower write speed.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• BBM HELP! BBM ver.10.13.6.9 trouble on save the image became multiple

  My blackberry Z10. After you download bbm version 10.13.6.9 I had when I was download the bbm group photo. And im save the picture in the file manager for this unit.
  The problem is when I download the first picture normally, but when I save second photo, that he became double/twin, and also on the third photo is multiple (see photo 3) and much more.
  Some body having problems like me, or just me?
  Please may someone help.

  Your last sentence, the problem, I understand. The preceding sentences on what you're doing, I can't follow.

  Here's what I'd do, step by step...

  1. in BBM, press twice on the image in the chat (this opens another screen with partial view of the image, with the comments below)

  2. tap the image again (this opens another screen with just the full image)

  3. tap on the bottom right icon and select Save as (this opens the screen to navigate to the location of the folder to save the file)

  4. save the file

  So, what do you do? If not, what do you do, step by step?

  For example, to display the file in the folder...

  1. open the file manager app files

  2. navigate to the folder containing the image

  3. Select the file to open

  Then, follow these steps. You see two files of the same image? Exacly same file name, or are the names of different files? You can post a screenshot?